Problem in Tp import......

Hi
I created a TP which is imported normally in the Q system ... But when i try to move it to production taking huge time...Guru's pls help.
Thanks.

HI
   Please check the following link.
Re: re:- Transport system
Sure it going to resolve your issue.
In case if you have problem with the RDDIMPDP job you need to reschedule it, This can be done as..
The transport dispatcher RDDIMPDP is scheduled as an event-controlled background job. To help identification, the name of the
job contains the client where it is scheduled. The triggering SAP event is also client-specific.
Client   Job name             triggering event             with parameter
000        RDDIMPDP            SAP_TRIGGER_RDDIMPDP
nnn      RDDIMPDP_CLIENT_nnn SAP_TRIGGER_RDDIMPDP_CLIENT nnn
To enable the transport to run without errors, the program RDDIMPDP must be scheduled as a background job in client 000 and
in all clients where data is being imported or exported. This job is scheduled automatically when you use the standard client
copy tools to create a new client. However, you can schedule the job at any time, for example, if you only find out that it
is not scheduled when the transport is already running.
To schedule the program RDDIMPDP as a background job, log on to the appropriate client as a user with CTS administration
authorization and execute the program RDDNEWPP in the ABAP Editor (Tools -> ABAP Workbench -> Development -> ABAP Editor
(transaction SE38)).
RDDIMPDP starts the transport steps in separate background processes. This means that there must be (at least) two background
processes available in the R/3 System (profile parameter rdisp/wp_no_btc). If the system runs on multiple application servers
you can distribute these background processes across them.
The transport control program tp must be able to communicate with the message server of the SAP System to be able to trigger
the SAP event for starting RDDIMPDP. This is guaranteed if tp is started on an application server of the SAP System where the
export or import takes place.
This is always the case for imports and exports started within the SAP System (from the Transport Organizer or the Transport
Management System). For imports started at the operating system level, it depends on the host where tp is called.
For more information on communication between tp and the message server, see Note 11677 in the SAPNet - R/3 Frontend.
Regards...
S.Manu.

Similar Messages

I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
john

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

Getting Started with FCE - Problems with my imported files

Hi,
I'm trying to get started with Final Cut Express, but I'm experiencing lots of problems when I import my project from iMovie.
My project contains video, which I imported into iMovie at 960 x 540. It also contains some keynote animations, which I exported from Keynote as quicktime files.
When I export my files to FCE, I instantly get problems.
1) When I add the imported file to the sequence, I get an "Attention the clip does not match the sequence's setting or any of your sequence settings" error.
2) Whether I choose to translate my settings or not, I try to play the video in the timeline, but there is a continuous beeping sound, no audio from my video and when it hits the keynote animations, it just says "unrendered" or "media offline".
Please can you offer any advice on how I can get started with FCE more successfully.
Thanks!

Hi(Bonjour)!
(please specify iMovie and FCE version)
Well, your sequence settings in FCE should be DV-PAL 48 Khz.
Create a new sequence.
From iMovie and Keynote, export your movie with quicktime conversion andd select DV-PAL 48 kHz (*And Not* DV Stream...). This material should play without rendering because his format and codec match the sequence's codec.
Import your files and everything should be OK.
Michel Boissonneault
The audio should be AIFF 48 kHz 16 bit linear PCM

Problem with the imported video clips

Hi! I'm very new to Premiere Pro, so please don't scold me :)
I have a video file (.AVI) that I want to remove the audio from, and insert a new audio track.
Here's my problem: When I import the AVI file into Premiere, and double-click it to preview it, it is really glitchy. The video is 1 minute long. During ~5 seconds in the very beginning, the whole video's "video" track is played, extremely speeded up (It plays through it all). The rest of the video consists of a freezed frame, and the audio is played in normal pace.
I do not know which codec the AVI-file is encoded with, is this relevant?
When I restarted Premiere the first time, it told me that it had to download codecs. I pressed OK and the codecs was downloaded and installed okay, but the problem remains.
I copied the .AVI-file directly from my camera (Canon IXUS 700 I believe).
When I play the original AVI file with VLC, everything runs perfectly with audio and video.
I'm totally clueless, anyone have a clue how I can solve this?
Any help at all appreciated, thanks in advance!

>I do not know which codec the AVI-file is encoded with, is this relevant?
Very relevant. Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting, but the password from the old computer in when waking the computer from sleep.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting the new computer, but the password from the old computer in when waking the computer from sleep. I want to use my iCloud password on both computers consistently. How can I fix this?

The only other place to change a password for the computer login is in Users & Groups preferences. But I don't really know enough here to fix your problem. You can try fixing the keychain:
iCloud- Frequently asked questions about iCloud Keychain
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

House Bank number problem with BSP import

Hi,
I have a problem when i import an bank statement that i get an error that the house banknumber is not the same as in de import file. I believe the problem is that in de house bank definition in SAP there are dots (.) between the housebank number like 12.56.58.789 and in the import file on row :25 there are no dots between the number 125658789. Does anybody know how to solve this problem ? i tried something with the add-on format definition and find out that the field "AccountInfo" need some changes.
The expression that is used in the bfp file is (?<=:25:)[^\r\n]*(?=\r\n)
Can somebody help me?
THANKS
Mark

Hi Mark,
The rule for importing data from a bank statement is that house bank account defined in B1 and the data filled into account number field should match bit by bit. So in your case there are two options:
1. change the account number definition in B1 to remove all the dots.
2. if that's impossible, you have to change the BFP file via Format Definition add-on to insert the dots into the pure digit series. that could be done by assigning a mapping method to the account number field.
use concat() function and substring() function together. about the usage of the function ,you can refer to the online help of the tool.
Cheers,
Tedy

Problem with batch import and ReadAloud flag

We use the batch import to get our books into the Content Server. We have a couple of books where we want to allow the read-aloud feature. According to the manual setting the flag acs:RightReadAloud to -1 in the XML import file should take care of this but it doesn't work for us. I have tried setting the flag to -1 and 0 but the result is the same. Below is an excerpt from our XML file: <acs:PublishInfo> <acs:RightReadAloud>-1</acs:RightReadAloud> Any suggestions?

What version of ACS are you using and what process are you using? The following should work: - export the XML for the books you want to change - modify the XML tags for acs:RightReadAloud from 0 to -1 - make sure the values for the NotifcationType tags are set to 04 (update)--rather than 03 (replace) <Product> <NotificationType>03</NotificationType> - import the XML Do a new search for the books in ACS (to make sure you're seeing the new values) and check that the read aloud rights have changed. There is a problem in the importer which could cause an update like this to fail. See: http://support.adobe.com/devsup/devsup.nsf/docs/53803.htm

Problem with export / import

Hi everybody, I am having a problem with an import. I am doing an export with a value in an user exit:
EXPORT V_NLQNR = V_NLQNR TO MEMORY ID 'QUANTL'
And after I call import in another program:
IMPORT V_NLQNR = V_NLQNR FROM MEMORY ID 'QUANTL'.
But when I check the sy-subrc I am getting 4, so I don't get anything.
Does anybody why?? Is there a problem if I call the export from an user exit??
Thanks in advance.

Hello,
I think you have the right idea.
As a suggestion I would name my variables to make it clear which data is being
exported/imported. I would also use different names on the left and right side of the = sign.
Here is a working example from programs that I use:
In the first program
   EXPORT intercodata FROM g_data_exp TO MEMORY ID 'INTERCOWOS'.
     where g_data_exp is declared as a global variable
In the second program
   IMPORT intercodata TO g_data_imp FROM MEMORY ID 'INTERCOWOS'.
     where g_data_imp is declared as a global variable
The syntax that you use ( p1 = dobj1 ) should work as well, just make sure that the variable v_nlqnr to the right of the equal sign has a value before the export.
Regards
Greg Kern

Problems trying to import PPT

I have a very simple, 3 slide PowerPoint file saved as type
"PowerPoint 97-2003 Presentation". When I attempt to import it into
Captivate CS3, it "thinks" for about 3 minutes, then says I have
3,249 slides in the PPT. The slide previews are blank. If I attempt
to import any of the slides, they are blank. I have a screen shot
if needed.
What's going on here?

Hi Donger,
I just solved my problem with the import of PowerPoint
shows. I read a Tech Bulleting that says to re-install the Flash
player (see:
http://kb.adobe.com/selfservice/viewContent.do?externalId=f951a12a&sliceId=1
). I followed the steps outlined and now the timport - with all the
animation, works fine.
Hope this helps

Having problems finding and importing actions I recorded in CS5 :(

Hi. I've recently upgraded from CS5 to CC but I'm now having problems finding and importing actions that I previously had recorded in CS5. Where do I need to look to locate these actions, as they are still in CS5 when I open it.

You export them using the flyout menu in the top right corner of the actions palette. Conversely, you load them the same way in the new version.
Mylenium

Latest problem - can't import using card-reader

In Bridge>File>Get Photos from Camera.....
App recognises there is card reader and card and amount of photos and then when asked to "get Photos", I get this message:-
"Adobe Bridge CS3 cannot obtain files from this device. Please ensure that the device is connected properly, or that the battery is charged, and try again."
What does this mean? - I am using a card reader, there are no batteries! There is never any problem when I import using Capture One Pro or iPhoto or LightRoom or Aperture with this method, so why now?
Any thoughts?
Cheers
Frances

First check if you have the latest version for Bridge CS3 (it should be 2.1.1.9)
Then restart Bridge holding down option key to refresh the preferences. Then set the preferences again to your wishes and try again.
You should prefer a card reader for downloading images instead of directly from the camera. there are several threads with the reason why this is a better method.
Photodownloader can do this job, don't forget to explore the advanced settings :-)

Problems with data import to Static view object... Need help...

Hi! I have problem when I import data to my Static View object from *.csv.
I followed tutorial - http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcquerying.htm#CEGCGFCA
Lets take a look to Figure 5-14 Sample Data Ready to Import from CSV Flat File. There are 3 columns. For Example in column C I have only lines. Bun in A and B column I have all 5 lines. I want to import data from one CSV file. So when I imported data and have some empty fields in column C. When I create SelectOneChoice object in my form, and run it, then it takes also empty fields as choices in my SelectOneChoice object. It is when I create Select one choice from column C Why it is so? And what to do?
Waiting for response from anyone...
Best regards!

HI! Can someone give me opinion on my problem?
Best regards

Problem in Auto import & syndication.

Hi All,
I am facing an unusual problem in auto import & syndication.
The problem is all of a sudden the import & syndication process stops
without making any changes.
Has anybody faced the same problem & any inputs to overcome.
Regards,
Pramopd

Hi Pramod,
The problem is all of a sudden the import & syndication process stops
without making any changes.
Can you explain your problem a little more in detail
Automatic importing and syndication stops suddenly means is it that after importing or syndicating a file once it does no work again?
If this is your problem then check for the following things:
- After automatic importing of a source file once .MDM places the file automatically in the archive folder.If you wish to reimport the same file it may not work again if in your import map import actio is just create.As once you have imported the fiel based on the primary key in teh matching tab the rec has alredy been imported in MDM so next time this rec will not com eunder th create import action but Update all mapped field option.So if you wish to reimport teh smae rec then change your import action acc or else jsut cahnge th primary field value in the xml and a new rec will be imported.
- As for Syndication,if you have syndicated a file once out of mdm and the suppress unchanged records property is enabled in syndicator then the same records will not be syndicated again untill any field value for those rec change.You will have to disable taht property again if you wnat to resyndicate the same rec or else make any changes in the rec to resesnd it.
- If your issuse is something else and is not solved by this then try checking th import and syndication services on your machin.Go to services.msc and check to see that the import and syndication server is started if not restart it.
- Also check the config file ie mdis.ini and mdss.ini for the valid entries .The delay time for scanning a port.Also check if any exception have occured in the exception folders.
Hope It Helped,
Thanks & Regards
Simona Pinto

Having problem with images imported from photoshop

I am totally new to Fireworks, I am redoing a site that was done using CS2, that is GoLive, Photoshop and Image Ready. I wanted to begin familiarizing myself with Fireworks by starting with using it to make all the web images for the site (jpgs, pngs, etc). It started well but after a while I started getting strange results from FW when I imported PSD files. The PSD imports fine into FW but when I want to "preview" or do a "2-UP" and see what it looks like as a jpg or png I just get a blank image where the jpg or png is supposed to be. However if I "export" the jpg it does get exported, but I would like to preview it to see what the quality is. This doesn't happen every time but at least 50% of the time in the last 2 days, and there seems to be no rhyme or reason behind why it works with some images but not others.
Another thing is that if I add a layer effect to the image such as "inner glow" to the PS image, and then flatten the image to make sure it gets exported to FW, it doesn't get exported. It is as if I never added the layer effect in PS.
Any help on these two issues would be greatly appreciated and help me to continue in perservering with FW.
VL Branko

I don't think I've cracked open Bridge since upgrading to CS5/CS6, and I'm hesitant to start today! I'm therefore kind of assuming that you're starting with PSDs and opening them up in Fireworks. (If you're not doing this, give it a try.)
Regarding the 50% failure of Preview and 2-Up modes, I was thinking that saving the PSDs as native Fireworks PNGs—within Fireworks—might eliminate that problem. It's hard to imagine Fireworks not previewing its own file format, but easier to imagine it failing to properly preview a PSD file. And again, perhaps File > Image Preview might work better for you.
As far as the "inner glow" issue: 1) Be sure to add it into the PSD before importing into Fireworks, and 2) If it doesn't show up, have a look at Filters within the Properties panel for the selected object; you could try selecting Inner Glow within ‘Photoshop Live Effects’ or try out Fireworks' own native Inner Glow filter effect.
Other than for the purpose of familiarizing yourself with Fireworks, you may want to consider why you'd use Fireworks for these graphics, if they were originally created in Photoshop. Small changes in graphic appearance are always possible when moving between applications. For example, Photoshop is color managed whereas Fireworks is not; you therefore might notice a small shift in saturation or tonality between the two applications. Whether this is a concern depends on your final output goals.

Problem active directory importing users at ix4-300d sw ver 4.1.108.32627

Installed new ix4-300d onto network, added to SBS 2008 domain and can log into NAS with domain\administrator account . In users & groups can see domain\administrator account along with local admin account. Click on sync with AD, no errors, but never get any users in the list
Whats the problem ? I need to get users from AD imported to get shares working.
Please help as customer is not happy.
regards
Peter

Hello blue256
If you entered a Organisational Unit in the Domain Management page, please try clearing the OU field and try re-adding the unit to the domain.
After that is done, please try checking if the domain user and groups are accessible from User and Groups page.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Problem with LR5 Import on MAC, it always shows "file cannot be imported because it could not be read" This happens with file downloads from the memory card as well as with files from the hard drive. Happened out of the blue and I cannot figure out why. P

I need some instructions to solve this problem, has anyone had the same problems? We just got an imac and changed from windows to mac. At first LR worked perfectly, all of a sudden I cannot import pictures anymore. Please help!!

The destination directory, where Lightroom is trying to copy photos to, does not have WRITE permission. Change your permissions.

Problem in Tp import......

Similar Messages

Maybe you are looking for