Problem  in TR6 challan through J1IH

Dear Experts,
While  at the time posting TR6 challan through J1IH.I am getting following problem.
Kindly help
Inconsistent currency information
    Message no. F5725
Diagnosis
    Company code 'PSML' has currency type '10'. This currency type has the
    currency key 'INR' in the financial accounting application.
    The same currency type is conveyed to financial accounting across the
    accounting interface with currency key ''
System Response
    Currency data conveyed with this key cannot be processed in the
    financial accounting module.
Procedure
    This is a system error in the calling application.
  Currency type '10' in company code 'PSML' must have currency key '' when
  the data is transmitted.

Check the currency you have assigned for your company code and the required valuation area in defining the valuation area and assigning to the accounting code,
You can also refer SAP notes, 164235 - F5725 for cross-company code goods movement & 501342 - Message F5725 during release to accounting (2)

Similar Messages

  • Error while doing J1IH (Excise JV) - TR6 Challan posting

    I am getting the following error while doing,  J1IH (Excise JV) - TR6 Challan posting
    Please assist....
    Short text
        The COMMIT WORK processing must not be interrupted.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLFACS" had to be terminated because it h
        come across a statement that unfortunately cannot be executed.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        During the COMMIT WORK statement, the following are executed:
        - the routines registered with the statement PERFORM .. ON COMMIT,
        - the registered methods for the events of the object services
          and
        - possibly the local update (SET UPDATE TASK LOCAL).
        An exception was raised and caught. The normal sequence of the routines
        was interrupted by this resulting in the program being continued before
        the call of COMMIT WORK. As this can lead to inconsistencies, the
        processing cannot be continued in the normal way.

    Thanks Milind...
    I am also getting the following error:
    Balance in transaction currency
        Message no. F5702
    Diagnosis
        A balance has occurred in transaction currency 'INR' with the following
        details:
        Exchange rate '00', amount '       500,000.00' and currency key 'INR'.
        The data in the transaction currency were transferred from the calling
        application.
    System Response
        Your data cannot be processed in FI.
    Procedure
      The error is probably in the calling application.
    Please assist

  • J1IH-TR6 Challan

    Hello
    Please let me know what we do using the TR6 Challan
    using T_Code : J1IH.What accounting entries are passed in such cases.
    As per my knowledge the debit entry is passed on to the PLA Account.What is the use of this PLA Account and PLA on hold account.
    From
    Shikha

    Hi,
    Making Adjustment Postings for Money Transferred to PLA
    Use: - You follow this procedure to make an adjustment posting when you transfer money to your personal ledger account (PLA).
    Prerequisites: - You have already transferred the money to your PLA at the bank, using a TR6 challan, and have posted the corresponding accounting document.
    Procedure: -
    1. J1IH  Excise JV  TR6 challan
    2. Enter data as required, including the document number.
    You can enter either the challan number OR the number of the accounting document (This document is to be first created through T. Code u2013 FB50. In this Document Debit PLA on Hold A/c and Credit Bank A/c with the Amount to be transferred in PLA CENVAT Accounts)
    3. Click on u201CEnteru201D button.
    If you entered the accounting document number, the system displays the information from it.
    4. Enter the amounts against the accounts that you require.
    5. Save the adjustment posting.
    6. System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
    PLA On Hold - Cr
    PLA BED - Dr
    PLA ECS - Dr
    PLA SECess - Dr

  • J_2IACCBAL table was not updated after TR6 challan

    Hi,
    At the time of depositing the amount for PLA, you will be passing an entry Debiting PLA on Hold and crediting your bank account. Once the bank acknowledges the receipt, you need to update the PLA amount through J1IH transaction (TR6 Challan). At that time the entry will be Debiting PLA and Crediting PLA on Hold. It will create an entry in your PLA register with a serial number.
    But in here J_1IPART2 table was updated with  Debit/Credit fileds(S and H) and table J_2IACCBAL does not have any values for PLZBED,PLAECS and PLAAT1 so i,e the reason PLA register print does not have any value.
    1)First our J_2IACCBAL table for PLA is ZERO
    After the entering of the values in TR6 challan then the PLA values should appear in J_2IACCBAL , but in this case we were not get that values in J_2IACCBAL. why?
    mahesh

    Hi,
    Go to T Code - J2I5 (not 215 it is j 2 i 5) enter details and select register PLA Check box and execute. This can be extracted many times - no problem.
    After J2i5 balance will update in registers including tables.
    Ramesh

  • Utilization of Cenvat Credit through J1IH (Plz. Guide)

    Practice followed by co. is to Utilize Cenvat Credit through J1IH T.Code -
    In J1IH, Tab Other Adjustment is used (i.e ETT-MRDY) for this purpose.
    Accounting entry ideally should get  passed through J1IH is -
    ED Payable A/C Dr.
    To RG23A BED A/C
    ED Cess Payable A/C Dr.
    To RG23A Ecess A/C
    Account Determination maintained is proper.
    Inside J1IH, There is a Tab namely Balance where system shows some Balance in RG23A against BED, E.Cess & AT1. Don't know which Balance system is picking up in J1IH Balance Tab because Actual Balance in RG23A Register is much more than the balance shown in J1IH Balance Tab.
    To the extent of Balance available in Balance Tab in J1IH, system is passing the entry correctly as explained above. However for excess amount, system is automatically  replacing the GL A/c as PLA BED A/C as against RG23A BED A/C in Determine GL A/C Screen in J1IH & passing the excess amt. to the credit of PLA BED A/C.
    There is sufficient Balance available in RG3A Register to cover the liability but still system is looking the Balance Tab in J1IH & utilizes the excess amount through PLA BED A/C by giving credit to PLA BED A/C.
    What Settings are required so that sytem should not automatically replace the RG23A BED A/c to PLA BED A/C?
    Need a Guidence in this regard....
    Thanks & Regards...
    Ameya....

    Hi,
    We are also facing same problem 2 weeks back,I found out that not sufficient Balance in RG23A BED account that's why system took Corresponding PLA account,This message is also confirmed from SAP also.
    And aslo maintain Proper Debit and Credit entry of MRDY t.type.
    Raghu

  • Higher Education cess not displayed in J2I6 when posted through J1IH

    Hi,
    We have passed an Excise JV through J1IH.
    BED, ECess and HECess accounts are credited and Excise Duty paid A/c is debited.
    All the values are posted properly. We have also checked the accounting document for this.
    But when we run the report J2I6 (after J2I5), HEcess value is not showing, where as all other values are displayed properly.
    Where may be the problem?
    Is there any SAP Note we need to apply?
    Regards,

    HI,
    There is no relation ship between your tax procedure (eg: TAXINN) and withholding tax confirguration.  Please check the does the higher education cess is getting posted or not when you post FI invoice.  If it's fine, it should post when you do MIRO.
    Withholding tax will not be posted when you do MIGO, it will be posted when you do MIRO only.
    Please use the same vendor for FI & MM invoices posting.  If still there is any issue in higher education cess posting - please check withholding tax configuration.
    Regards,
    Kiran Yelamarthy

  • Problem in creating IR through BAPI_INCOMINGINVOICE_create BAPI

    Hi,
    Some problem in creating IR through the BAPI BAPI_INCOMINGINVOICE_create. I am able to see the IR number after executing the BAPI but unable to see the IR number in the table. The IR number is not getting updated in the database table even though we are doing the commit work after executing the BAPI. Could anyone help me out with this error.
    Regards,
    Ram

    First of all I am assuming that you did not get any error in the BAPI return structure (even though you see document number populated).
    Secondly,  I guess you tested the BAPI with SE37 and did not get any error (functionally there are a number of BAPIs available to post an invoice and it is important to figure out the correct BAPI - e.g. PO, non-PO invoice, invoice as a GL entry only, etc.).
    If that is not true (there is some error in posting), since during the BAPI call the next document number is obtained as a first step, you will see the document number but subsequently if for some reason it is not posted, you will see the result as you mentioned (no data in the database).
    If you are using correct BAPI and have no errors, then  in ABAP program make sure to call 'BAPI_TRANSACTION_COMMIT' after the BAPI call to post invoice.
    For non-SAP external system, you need not have to call the commit BAPI but just closing the connection to SAP will help.

  • Problem in sending mail through dynamics actions

    Hi Friends,
    I have a problem in sending mail through dynamics actions . In this  we pass a subroutine in dynamics actions which send an mail when promotion action occured.
    Problem is that sometimes it will  send an mail or sometimes not. I have no idea to solve this problem.
    Can anyone suggest me .
    Thanks ,
    Anish
    Moderator message : Duplicate post locked.
    Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

    Hi,
    Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
    thank You

  • I bought iPhone 6 Plus few days ago and I have the following problems: 1) When entering through Safary to Google Images and tap on each on of them they do not enlarged nor I am able by click on them to enter into the connected website

    I bought iPhone 6 Plus few days ago and I have the following problems:
    1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
    2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
    I would highly apreciate any help
    Kind Regards

    I bought iPhone 6 Plus few days ago and I have the following problems:
    1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
    2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
    I would highly apreciate any help
    Kind Regards

  • Facing problem in Information broadcasting through BI 7.0

    Hi,
    I am facing problem in Information broadcasting through BI 7.0
    In Web Bex Anyalzer, i selected the information bradcasting via Email. 
    I did all setting for Information bradcasting, in the output Format, when I select the output format as HTML or MHTML the system gives is  error when i click the excute button after scheduling .
    It gives an Shot DUMP on "MESSAGE_TYPE_X"
    And in WEB BEX Analyzer follwing are error messages
    Note
    The following error text was processed in the system BWQ : The current application triggered a termination with a short dump.
    The error occurred on the application server uplbwq_BWQ_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Form: INTERNAL_ERROR of program SAPLSDCL
    Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
    Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
    Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
    Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
    Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
    Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
    Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
    Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
    Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP
    But when i select the output Format as "online link to current data" there is no error when i click the excute button after scheduling . I receive a email with the Link for the online data, which open up query when i click the link.
    But in the output type HTML or HTML it does not work.
    Can suggest anu solution ASAP.
    Thank in Advance.
    Nilesh Labde.

    from the OSS Message

  • Problem while uploading data through F-43

    Hello Experts ,
    I am facing a problem while data uploading through F-43.
    Suppose I have many vendors with having several debit and credit items for each.So in t code same screen will appear for same vendor several times where we have to enter debit / credit items.
    Please suggest how to solve this issue through LSMW/BDC program.
    Thanks in adv.
    A Miter.

    Hi..
    Use BDC Recording MEthod ...
    Develop BDC program, Before Recording the Transaction sit with Functional Consulatnt for REcord The f-43.
    After that  that  u can do ur coding  and built ur own logic.
    Prabu

  • Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

    Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
    can any one help me bcoz i have to publish without air runtime.......

    Hi,
    This option is available when your publish target is set to AIR 3.6.
    You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
    Thanks!
    Mohan

  • Problems with installing Xcode through App Store

    Hey guys,
    So trying to install Xcode on my Late 12 Macbook Pro with the ML update for a project with work.
    Everytime I try to install through the app store, I get the Grey Screen of Death. Anyone else having this problem or what could it be? I've had no other problems with installing programs through the App Store.
    I am currently downloading through the developer portal, so hopefully that works.
    Hope someone can guide some light on this.
    Thanks guys!

    Hello,
    For you problem with the Mac App Store you can contact the support here :
    http://www.apple.com/support/mac/app-store/
    (choose Account and Billing; you can change the country at the bottom of the page if you prefer dutch and go back to the support page).
    For your problem with Mail and iCloud you can read this page :
    http://support.apple.com/kb/TS4002?viewlocale=nl_NL (Troubleshooting iCloud Mail).
    Hope this will help.

  • Cancel or reverse TR6 Challan

    Dear All,
    I have posted the TR6 Challan as onhold to Ecess acc
    so can anybody reply me that if i need to reverse it or cancel it ..so accounting entries will be rectified and again new challan can be posted.
    Regards,
    SDN browser

    I am trying to do that only
    but when i simulate for GL ACCOUNTS.
    it only takes PLA cenvat accounts (credit) but not the PLA on hold account (debit)

  • TR6 challan

    hi
    i want to see the display of TR6 challan. where i can see that. plaese tell me the table for TR6 chaalan.
    regards
    sap mm

    Hi,
    Check J_1IEXCDTL table with  Excise TT  : TR6C or other if it is customized in your client.
    Regards,
    Kapil.

Maybe you are looking for