Problem in Transaction CL24N

Hi All
When i want to configure value for release strategy using transaction CL24N and click only new assignment button it ask 2 option class and release strategy by selection second option it comes to second screen. In this screen when is press release group button system does not show any value its give following messageu201D No input help is available Message no. DH804u201D before it was working fine. Please guide me how to solve this error.
thanks

Hi,
Please check the configuration for Release Group & check release strategy assign to release group.
Check entries in table T16FS.
AMIT

Similar Messages

Problem with transacted JMS connection factory and transaction timeouts

          We encountered an interesting problem using transacted JMS connection factories.
          An EJB starts a container managed transaction and tries to validate a credit card
          before creating some information to a database for the user, in case of success
          an SMS is sent to the user via the transacted JMS queue. If the credit card authentications
          duration is about the same as the transactions timeout (in this case the default
          30 seconds) sometimes the database inserts is committed but the JMS insert is
          rollbacked. How can this be?
          If the authorization duration is much longer than 30 seconds everything works
          fine (both database and JMS inserts rollbacked), the same is true if a rollback
          is insured by calling EJBContext.setRollbackOnly(). The problem thus occurs only
          if the duration is approximately the same as the transaction timeout, it appears
          that the database insert is not timeouted but the JMS insert is. How can this
          be if they are both participating in the same transaction.
          The JMSConnectionFactory used is a Connection factory with XA-enabled. The result
          is the same also with the default "javax.jms.QueueConnectionFactory" and if we
          configure our own factory with user transactions enabled.
          Any help appreciated!


Tomas Granö wrote:
          > We encountered an interesting problem using transacted JMS connection factories.
          > An EJB starts a container managed transaction and tries to validate a credit card
          > before creating some information to a database for the user, in case of success
          > an SMS is sent to the user via the transacted JMS queue. If the credit card authentications
          > duration is about the same as the transactions timeout (in this case the default
          > 30 seconds) sometimes the database inserts is committed but the JMS insert is
          > rollbacked. How can this be?
          It should not be.
          >
          > If the authorization duration is much longer than 30 seconds everything works
          > fine (both database and JMS inserts rollbacked), the same is true if a rollback
          > is insured by calling EJBContext.setRollbackOnly(). The problem thus occurs only
          > if the duration is approximately the same as the transaction timeout, it appears
          > that the database insert is not timeouted but the JMS insert is. How can this
          > be if they are both participating in the same transaction.
          >
          > The JMSConnectionFactory used is a Connection factory with XA-enabled. The result
          > is the same also with the default "javax.jms.QueueConnectionFactory" and if we
          > configure our own factory with user transactions enabled.
          >
          > Any help appreciated!
          Make sure that your session is not "transacted". In other words,
          the first parameter to createSession() must be false. There is an
          unfortunate name re-use here. If a session is "transacted", it
          maintains an independent "inner transaction" independent of the
          outer transaction. From the above description, it seems unlikely
          that your application has this wrong, as you say that
          "setRollbackOnly" works - but please check anyway.
          Make sure that you are using a true XA capable driver and database
          (XA "emulation" may not suffice)
          Beyond the above, I do not see what can be going wrong. You
          may want to try posting to the transactions and jdbc newsgroups. Note
          that JMS is appears to be exhibiting the correct behavior, but the
          JDBC operation is not. The JDBC operation appears to have
          its timeout independent of the transaction monitor's timeout.
          Tom

Probleme with transaction in session beans

Hello.
i create an session bean which call enties beans.
When i execute un example first time, its correct.
when i execute for second time, the methode don't stop.
i think it is problem of transaction.
thank you

Hi,
It is impossible to answer your with the given information. When ever you are asking a question please put the relavent informatin like code and deployment descriptors. So please do post the required information.
Ashok

Problems with transaction CJ20N

Hello Experts,
I have created a tooling asset with transaction AS01 and I have some problems with transaction CJ20N.
I would like to know how can we Link the Asset already created with the WBS by transaction CJ20N.
Thanks
Ferdaws

Hi Ferdaws,
In the asset master (AS02) you can maintain the WBS element in Time Dependent data.
For maintaining the WBS element in asset master, first you have to make WBS element optional entry in Screen Layouts for Asset master data.
Kindly check with this.
Best Regards,
Vasu.

BADI used for updation of Amount fields for transaction CL24N

Hi All,
Badi's used for the transaction CL24N . Since need to update amount field ZPO_AMOUNT , ZPO_AMOUNT_GBP in the trsaction for a particular Realease strategy
Thanks,
Narasimha.

Hi,
There are 4 User-Exits and 2 Badis present for that transaction. Check whether it is useful.
Enhancement/ Business Add-in            Description
Enhancement
CLCLRS01                                Additional Fields on the Result Screen
CLCLRS02                                Fill the Additional Fields on the Result Screen
CLFM0003                                Call Up After Check of Assigned Characteristic Values
CLMMD001                                Selection of Objects for Mass Processing
Business Add-in
CACL_CHARACTER_INPUT                    Value Assgmt Screen: Set Ready-For-Input Status for Chars
CACL_VALUE_CHANGE                       Change/Check User Input Before Syntax Check
Hope this will help.
Regards,
Swarna Munukoti.

Problem with Transaction-Duration Dialog

Hello All,
I wonder if somebody could shed a light on the problem that we're having
with transaction-duration dialog service object. The problem is this.
When we call the service object and its SQL statement fails (for
example, because of constraint violation) Forte raises AbortException.
It also clears the error stack, so we have no way to know what caused
it, original error ("ORA -... Constraint Violation") disappears. All we
get is this:
USER ERROR: Access to a load balanced router member (which is a service
object) failed for the reasons below.
Class: qqsp_AbortTransaction with ReasonCode: SP_ER_USERABORT
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Last TOOL statement: method tester.test, line 3
Error Time: Thu Jul 2 15:56:40
Distributed method called: SO_UmbrellaProxy.testAbortExc (object
name
site/sosa_sampleservice_cl0/th_testabort_cl0-bmso0x15d:0x1) from
partition
"TH_TestAbort_cl0_Client", (partitionId =
DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x2, taskId =
[DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d.4]) in application
"Forte_cl0", pid 74 on node AANANIEV in environment archenv
Originator: SP_AO_XACTMGR
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x1, taskId =
[DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x1.16]) in
application
"Forte_cl0", pid 74 on node AANANIEV in environment archenv.
USER ERROR: Your transaction was aborted
Class: qqsp_AbortTransaction with ReasonCode: SP_ER_USERABORT
Error #: [402, 45]
Detected at: XactMgr.TXAbort at 1
Error Time: Thu Jul 2 15:56:40
Originator: SP_AO_XACTMGR
Exception occurred (remotely) on partition
"TH_TestAbort_cl0_Part1-router", (partitionId =
DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15b:0x9, taskId =
[DC5B2DC0-0EA9-11D2-AFD0-5F72194BAA77:0x15d:0x2.17]) in
application
"TH_TestAbort_cl0", pid 18196 on node hp9000_1 in environment
archenv.
Has anyone experienced this problem with "transaction-duration" service
object? Is there any way to find out the cause of "AbortException"? It
seems impossible to catch the AbortException on the server partition,
looks like Forte exits right away.
Everything works fine with "message-duration" dialog, unfortunately it
is not an option for us because of the way our batch programs were
designed.
Any help is greatly appreciated.
Alexander Ananiev
Claremont Technology Group
916-558-4127
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

thanks Peter for trying to help
ok, i've narrowed down the problem, it seems that when i try and save a file onto one partition of one of my ext drives it won't save to my last save dir but if i save to another partition/drive it works ok, also if i rename the 'dodgy' partition it also seems to work ok, so somehow the name of the drive has become corrupted.
anybody ever heard of this? or how i could fix this as it's a quite annoying because alot of my audio files are referenced on this partition, so itunes or Cubase (audio sequencer) can't find my files now.

Petstore 1.3.1 NAMED_SEQUENCE problem: "The transaction is no longer active"

Hi all,
I am currently trying to get Petstore 1.3.1 going on WLS 7.0.0.1 an got
into quite som trouble (btw, does anyone have expereince with this
cofiguration?). After successful deployment in /application I tried the
"populate database" link on ~/petstore/index.jsp and got:
java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
     at weblogic.jdbc.jts.Connection.checkIfRolledBack(Connection.java:541)
     at weblogic.jdbc.jts.ResultSet.close(ResultSet.java:293)
     at weblogic.jdbc.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:144)
     at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:96)
     at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:87)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResultSet(RDBMSPersistenceManager.java:1797)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResources(RDBMSPersistenceManager.java:1679)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:1489)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:1307)
     at com.sun.j2ee.blueprints.address.ejb.AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.ejbCreate(AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.java:1723)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.ejb20.manager.DBManager.create(DBManager.java:737)
     at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:716)
     at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:182)
     at com.sun.j2ee.blueprints.address.ejb.AddressEJB_fvu9sn_LocalHomeImpl.create(AddressEJB_fvu9sn_LocalHomeImpl.java:155)
     at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator.createAddress(AddressPopulator.java:94)     at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator.access$7(AddressPopulator.java)
     at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator$1.create(AddressPopulator.java:73)
     at com.sun.j2ee.blueprints.petstore.tools.populate.XMLDBHandler.endElement(XMLDBHandler.java:145)
     at org.xml.sax.helpers.XMLFilterImpl.endElement(XMLFilterImpl.java:595)
     at com.sun.j2ee.blueprints.petstore.tools.populate.XMLDBHandler.endElement(XMLDBHandler.java:158)
     at weblogic.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1411)
     at weblogic.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:1613)
     at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1219)
     at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
     at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
     at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
     at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.populate(PopulateServlet.java:162)
     at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.doPost(PopulateServlet.java:118)
     at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.doGet(PopulateServlet.java:106)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at com.sun.j2ee.blueprints.signon.web.SignOnFilter.doFilter(SignOnFilter.java:151)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at com.sun.j2ee.blueprints.encodingfilter.web.EncodingFilter.doFilter(EncodingFilter.java:77)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5366)
     at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
and similar traces for ContactInfo, CreditCard, Account, Profile, ...
I nevertheless get to the main screen of the Petstore as if everything
worked well. In fact, it seems like the DB got populated somewhat
correctly; only tbe named sequence tables are unchanged (btw: are the
named sequences expected to be auto-created with
create-default-dbms-tables enabled ?). The strange thing is that every
correct row (in my case having the even IDs) is followd by an all (except the
odd numbered ID field) "NULL" row. This does not happen in all
...EJBTABLEs --- Address and ContactInfo for example are affected, but Profile
is not.
It seems as if ordering a rattlesnake would work well, even though more
of the same type of Execptions appear in the jdbc log. I suspect that the
trouble will start when the 10 cached ID are exhausted.
Any ideas?
Kai

I just tried the Petstore 1.3 example provided with WLS 7.0.0.1 and found
petty much the same exception after enabling the jdbc log:
java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
     at weblogic.jdbc.jts.Connection.checkIfRolledBack(Connection.java:541)
     at weblogic.jdbc.jts.ResultSet.close(ResultSet.java:293)
     at weblogic.jdbc.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:144)
     at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:96)
     at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:87)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResultSet(RDBMSPersistenceManager.java:1797)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResources(RDBMSPersistenceManager.java:1679)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:1489)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:1307)
     at com.sun.j2ee.blueprints.po.address.ejb.AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.ejbCreate(AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.java:1755)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.ejb20.manager.DBManager.create(DBManager.java:737)
     at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:716)
     at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:182)
     at com.sun.j2ee.blueprints.po.address.ejb.AddressEJB_fvu9sn_LocalHomeImpl.create(AddressEJB_fvu9sn_LocalHomeImpl.java:86)
     at com.sun.j2ee.blueprints.po.purchaseorder.ejb.PurchaseOrderHelper.persistPoCMRInfo(PurchaseOrderHelper.java:116)
     at com.sun.j2ee.blueprints.po.purchaseorder.ejb.PurchaseOrderHelper.persistPO(PurchaseOrderHelper.java:164)     at com.sun.j2ee.blueprints.opc.ejb.MsgBean.doWork(MsgBean.java:103)
     at com.sun.j2ee.blueprints.opc.ejb.MsgBean.onMessage(MsgBean.java:72)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:348)
     at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:282)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:263)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2309)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2232)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
Is there a problem with my general setup maybe, or is this exception to
be ignored?
Kai

Problem in transaction MIGO

Hi, people
In transaction MIGO there is error:
message M7001 "Check table YMBUZ: entry 0001 x does not exist"
How is it possible to correct this error?
This problem was already discussed in the forum but there is still no solution.
Regards,
Vladimir

Hi
try this
Go to SM30.
Fill out table YMBUZ
Push button 'Customizing'.
Choose 'Continue without specifying project'.
You get a list of all customizing lines influencing the chosen table.
Select the applicable line.
Regards
Kailas Ugale

Performance problem with transaction log

We are having some performance problem in SAP BW 3.5 system running on MS SQL server 2000.The box is sized 63,574 MB. The transaction logs gets filled up after loading data in to a transactional cube or after doing selective deletion. The size of the transaction log is 7,587MB currently.
Basis team feels that when performing either loading or selective deletion, SQL server views it as a single transaction and doesn't commit until every record is written. And so as a result, transaction logs fills up ultimately bringing the system down.
The system log shows a DBIF error during the transaction log fill up as follows:
Database error 9002 at COM
> [9002] the log file for database 'BWP' is full. Back up the
> Transaction log for the database to free up some log space.
Function COMMIT on connection R/3 failed
Perform rollback
Can we make changes to Database to make commit action frequently? Is there any parameters we could change to reduce the packet size? Is there some setting to be changed in SQL server?
Any Help will be appreciated.

if you have disk space avialable you can allocate more space to the transaction log.

Problem creating transactional iview for BW system

Hi gurus
We are facing one problem creating a transactional iview for a BW 3.5 system . We wanto to call transaction SU01 in our BW system using an iview. When we use SAP for html, we have all the menu on the iview , I mean the same result as if we use smen, not SU01.
And if we use SAP GUI , we are always having the same GUI Error
Sapgui 640 [Build 8986] Wed Apr 01 12:25:05 2009
: 'service '' unknown
Time          Wed Apr 01 12:25:03 2009
Component     NI (network interface)
Release          640
Version          37
Module          ninti.c
Line          505
Method          NiPGetServByName2: service '' not found
Return Code     -3
System Call     getservbyname_r
Counter          1
Please, can you help us?
Thanks in advance and best regards.

Thanks Bala for your quick reply. I´ve tried with function module RSBB_URL_PREFIX_GET and all the settings were OK. Still the same result.
Adding more information. We have another WAS 6.40 server with different Module(we have RM and XRPM , not BW) and we are having the same problems. I am wondering if its related with some special config or activation
Maybe I´ve forgot some service activation in SICF? I´m able to reach the SMEN, but not the SU01
or I´m missing some config elsewhere?
Thanks in advance.
Best regards.
Edited by: Jose Ignacio Arlandis on Apr 2, 2009 8:41 AM

Problem with Transaction SQVI

Hi All,
I am using transaction SQVI,
there I am clicking on the button create and there I am selecting Table join in the Data Set dropdown,
When I am pressing the enter button its giving error Message Type X,
Plesase suggest what may be the problem.
Thanks

Hi ,
This is SAPGUI problem ,Report this to Basis person .
We had done this when we faced this problem .
They will take care .
Please reward if useful.

Problem with transaction MD4C?

Hello everybody,
I have developed an interactive report which has a field on clicking which the control should transfer to a transaction (MD4C) which consists of SIX tabs.
I have written a small BDC for the same and when i try to run it behaves in different ways in different systems.
For eg,when i run on my system one tab is getting highted and when i run on another system another tab is getting highlighted.
And so the BDC that i wrote for a particular flow is not working.
Can anybody suggest a solution for this problem?
Helpful answers will surely be rewarded.
Regards,
Sanghamitra.

hi,
it has to do with the resolution of your monitor
when u start bdc recording .
in recording parameters there is :
default size : uncheck it.
plz reward points if it helps.
rgds

Problem w. transaction notSupported / releasing JDBC connections

          We are making a call from our EJB client to a stateless session EJB (1) with transaction attribute 'Required' for all methods. From this EJB (1) we get a JDBC connection from the pool and do some JDBC calls (no updates). We then make a call to a method in another stateles session EJB (2) with transaction attribute 'NotSupported' for all methods. In EJB2 we get a JDBC connection from the pool and do some JDBC calls (no updates). Something goes wrong and we catch a SqlException. We then throw a EJBException. So far everything is OK. But now we get a SqlException from the transaction: 'java.sql.SQLException: Connection is currently associated with xid: 970661671558_182.Rollback attempted in the scope of a different transaction'. It seems like the container tries to perform a rollback on the EJB tat doesn't support transactions. Shouldn't the transaction have been suspended when we entered the method in EJB2? Our problem is that the JDBC connection we got from the pool doesn't get released even though we closed it in a finally-statement in both EJB:s. So after some time we are out of free JDBC connections in our connection pool. Does anyone know why this happens?
          /Per


          We are making a call from our EJB client to a stateless session EJB (1) with transaction attribute 'Required' for all methods. From this EJB (1) we get a JDBC connection from the pool and do some JDBC calls (no updates). We then make a call to a method in another stateles session EJB (2) with transaction attribute 'NotSupported' for all methods. In EJB2 we get a JDBC connection from the pool and do some JDBC calls (no updates). Something goes wrong and we catch a SqlException. We then throw a EJBException. So far everything is OK. But now we get a SqlException from the transaction: 'java.sql.SQLException: Connection is currently associated with xid: 970661671558_182.Rollback attempted in the scope of a different transaction'. It seems like the container tries to perform a rollback on the EJB tat doesn't support transactions. Shouldn't the transaction have been suspended when we entered the method in EJB2? Our problem is that the JDBC connection we got from the pool doesn't get released even though we closed it in a finally-statement in both EJB:s. So after some time we are out of free JDBC connections in our connection pool. Does anyone know why this happens?
          /Per

Problem in transaction FS10N

Hi all,
in G/L Account Balance Display( FS10N) once i get list display when i click
CUMULATIVE DISPLAY button it will go to G/L Account LIne Item Display list
Here i have to add CUSTOMER field (sold to party or partner) And NAME field in
the list beside G/L account and company code fileds
Please let me know how to proceed.
shall i have to do any back ground setting or
i have to copy the program in to Z program
then modify?
urgent requirement
please let me know
thanks

Hi Ramesh,
Generally we try to use some userexits to add new fields. if there are no userexits to add a the field then we can try to lookout for some OSS notes attached with the transaction to see if SAP has provided some solution for this problem.
Even if it cant be done then one solution is to create a Z program and use it and other solution is to get the access key and modify the SAP code (Not recomended).
Hope that this gives you some idea regarding how to proceed.
Award points for usefule answers.

TS1702 Got problem about transaction Purchase Gold in games

I can't buys more gold from infinityblade2 it always said please contact iTunes about transaction but I always check my account no any problem I still have a lot money In my credit card

These are user-to-user forums, you can contact iTunes support here and ask them what the issue is : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Problem in Transaction CL24N

Similar Messages

Maybe you are looking for