Problem in Transport of ID objects using CMS

Hi,
I am using CMS to transport my IR and ID objects from DEV->QA->PROD.
While I am able to transport my repository objects successfully,I do have a problem with trnasport of ID objects.Especially this problem seem to exist only if i try to export individual objects.There isnt any issue for a complete ID transfer which is not my req.
When doing "Release FOr tranpsort" from QA after making the communication channels changes,The object appears in the "assemble " tab.
Ideally Once I assemble the objects,it should diasappear out of assembly page and should be appearing in the "Approval" tab..
But the objects successfully get assembled and dispapper from assembly ,they dont seem to be present in the next approval step.I am unable to track where they are lost.CMS logs doesnt show any error as well.
Any pointers from this issue?
Regards,
Rashmi

Hi,
This will help you,
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/55/7a09d0d7d34b828a9740e322b9222c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/54/8b5b0555264a93a679c2117fedc748/frameset.htm
This PDF file will help you a lot,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Regards
Agasthuri Doss

Similar Messages

Problem while transporting Screen exit object from DEV to QAS client

Hello All,
I have developed screen exit for tcode 'ME51N' to add customer field in newly added TAB. To grayout that field in display mode, I have added code on the PBO event of that screen. Code for PBO even has been written inside the include. Exit is working fine on development client.
After transporting the exit on QAS client the field graying out functionality in diplay mode is not working eventhough the include which contains the code for PBO even is exist on QAS. Also in flow logic if i double clock on the PBO module event, it says object does not exist, eventhough the include which contains the PBO event code exist in QAS.
Please, help me to understand why the linkage between flow logic PBO event and the include where the PBO code has been written is not getting transported from DEV to QAS.

Hi,
First check the TR log if there is any errors. If no errors, then check if all the objects were properly transported or not.
You might have missed out in transporting the enhancement activation(CMOD).
Try to Rebuild the object list for updating the navigation index. You can do this from SE80=>Rightclick on function group=>More functions=>Rebuild object list.
Thanks,
Vinod.

Auto transport of XI objects through CMS

Hi Gurus,
We have XI landscape alongwith JDI configured on Development system. Currently we are moving XI objects manually through CMS. Is there any way to move objects automatically through CMS (As we have in ABAP through STMS), if so please let me know the link or document.
Thanks & Regards
Shiv

Hello Shiv
This is not possible as far as i am aware.
Kenny

Integration Directory - Transport using CMS does not appear

Hi guys,
I'm having problems with one thing I thought it would be trivial.... I'm not able to get the option 'Transport using CMS' in the Integration Directory available.
I've done the necessary steps on the exchangeProfile in order to transport objects using CMS.
1. Configuring ExchangeProfile
IntegrationDirectory
com.sap.aii.ibdir.core.cms.enableTransportWizard=true
com.sap.aii.ibdir.core.cms.enableClTransport=true
IntegrationRepository
com.sap.aii.ibrep.core.cms.enableClTransport=true
com.sap.aii.ibrep.core.cms.enableTransportWizard=true
Added the values to com.sap.aii.ib.client.properties
u2022 com.sap.aii.ibrep.core.cms., com.sap.aii.ibdir.core.cms.
2. And after, I've created the tracks needed for IntegrationRepository and IntegrationDirectory.
For the IntegrationDirectory I've followed SAP's description:
"You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
3. I've restarted the J2EE Server.
When I export the objects from IntegrationRepository everything runs OK, but on the IntegrationDirectory I'm not able to have the option 'Transport Using CMS' available.
I've read several threads on the SDN but none of them solved the problem...
Can anyone give me any hint ?

Hi Sameer,
No luck.... There's nothing similiar to what I'm describing and the points which are mentioned i've already covered them.
Thanks for the tip, I was hoping it could give me a push...
Any ideas...?

Reg:: Error while XI Transport Using CMS

Hi! SAP Gurus,
I am trying to transport XI Integration Design and Configuration Objects from X42 (DEV) to X44 (Quality).
I want to transport Transport ID Design:5909a730a2fe11dcc8dd001125e7370c
Configuration: 1c3d0c90a30111dcb2c0001125e7370c
I was succefully transported the Design object but while I am transporting the Configuratio Object at First I am moving from X42- CMS and then from CMS-X44.
ERROR 1 :: But once I am Exporting I am getting an acknowledgement message and finally it was moving to CMS. But there in Consolidation TAB it was coming IMPORT FAILED.
But when I tried 6-7 times I sended it successfully and there that objects first went (sits) directly in Change lists of quality server ID Part. From change lists I am transferring to Scenarios by Right clickTransport.
ERROR 2: According to CMS some parameters will be lost in communication channels and in some other objects. while transporting using CMS.
How to recollect that parameters again ?
Will you please confirm simply copying the parameters from Development server and again editing or Is there any other method?
ERROR 3:. While I am activating any object in Configuration object I am getting the error

Unable to move object. Change lists were not part of the same import
Kindly Solve this issue and If Possible send me a brief note and complete procedure of
HOW TO TRANSPORT XI REPOSITORY AND CONFIGURATION OBJECTS USING CMS FROM DEVQAPROD SERVERS?
Hi! Gurus,
My Main Problem is :::
After Exporting from DEV---->CMS---->Quality it will goes to Change Lists of Quality Server QA and after that I am transferring them to Scenarios TAB by Right Clicking --> and Press Transfer..
Problem::: After that When ever I am trying to activate they are not activating I am getting the error::

Unable to move object. Change lists were not part of the same import

Hi! Gurus,
If you have any material with screen shots and also the solution to the above problem kindly send to my Mail ID::[email protected]
Thanks::
Amar Srinivas Eli.

Problem in transporting authorization object

Hi,
I am facing a problem in transporting the authorization object. We have an existing cube in development and production. In production the object has 3 authorization objects checked. Now I want to change the authorization object assignment in my cube. So I changed the assignment in the development, but when I tried to transport the authorization object it collected all the cubes where the authorization object is used.
I want to transport only the authorization object associated with that cube, not all. I understand that logically if we are transporting the authorization object from RSSM, it takes all the assignments. But I don't want to do that because there may be some inconsistencies between the system.
Can you tell me weather we have any other way, so that the authorization object is transported only for one particular cube assignment not all.
Thanks in advance
Prashant

Hi,
I tried that but not getting anything.
Can you please tell me the steps.
Steps I have done are as follows.
1. Go to RSSM and select the authorization object.
2. We have a button which says transport authorization object. I clicked on that.
3. I got a list of all the authorization objects there. I selected my authorization objects and clicked on Transfer Object button.
4. Then I get the hierarchy authorization objects.
5. After that I selected a request and everything is included in that request. I didn't got your above mentioned option.
Do you want me to go to the table RSSTOBJDIR and delete all the other entries??
It would be great if you can tell me the steps to do that.
Thanks in advance
prashant

Transports in XI using CMS, assembly issue

Hi all,
We have a 3 system landscape of XI . We have JDI configured in D system.
Currently we are using CMS transports from D to Q and file system transports from Q to P. We have planned to use CMS transports from Q to P also instead of file system transports.
In that process, when we selected a particular software component in the assembly tab, and selected assemble component, we noticed that all the software compoents assembly is running, which are present in the assembly queue.
Is there any procedure to stop the assembly for all the software components?
Thanks.

Transporting Objects
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm --> Configuring Groups and Transport Targets

Revert back the transports done using CMS

Hi.
Please let me know how to revert back the transports that are done using CMS.
If once the transport of the namespace has been done from DEV to CONS, can we revert back the transport so that the CONS system will have only those objects that it had before the transport.
I've gone through help.sap.com and some of the forums here regarding transports, but couldn't find the solution.
Please help me out in this regard.
Thanks,
Manohar.

Hi,
It is not possbile revert back the changes that are done using CMS. There is a scope to redo these changes at Oracle database level by redo logs but it is not at all suggestible as it may lead to inconsistencies.
Thanks,
Vijay Kumar T.

Transport of config objects...business system prblem...

Hi Gurus,
We want to transport dev and config objects from XI qua to a XI test server... we hav successfully transported all design objects...but we are facing problem while transporting the config objects because of business and technical system issue....the business system in quality points the ECC quality....how can i tranposrt the config objects with same business system name....is there any way??
Thnx in advance...

Hi,
This will be Maintained in SLD .You know what will be Business system name in Quality or Production.
While Creating Business system you need specify in the Transport Tab which is your Target Business System and also the Group like Production or Quality ,
When you do transport from Development and for the Dev_Bs (Bussiness system ) if you assign the Qaulity System Bussiness system ,it automatically move the object under Quality Business System.
if this setup is done in SLD when you do transport the Configuration Object It Automatically assigns the Quality and production Business System if you are doing Transport from Dev Respectively.
hope this helps.
Thanks,
Madhu
Edited by: Madhusudhan Honnappa on Sep 3, 2009 8:11 PM

LSADMIN CMS authorization problem - How To Transport XI Content Using CMS

We are configuring CMS using the "How To Transport XI Content Using CMS". For the LSADMIN user we have added the SAP_XI_CMS_SERV_USER and SAP_SLD_ORGANIZER roles. We have followed all of the steps in the guide.
The problem we are encountering is that when we define the domain but put in the LSADMIN as the user, we get an error - "SLD (URL http://server:50000) server exception: HTTP response code: 403 Forbidden"
We then gave the LSADMIN all of the roles of XISUPER and restarted the J2EE engine. We still have the same problem. So we changed the CMS User to be XISUPER and we could save the domain. Now, we have another problem - when we try to export from dev using CMS, we get the following problem:
"Sent on 3/9/06 at 1:26 PM: Unable to establish connection to CMS server http://servername:50000. Unable to transfer the following transport lists: Export list for ...
Details: unknown exception: com.sap.cms.util.exception.conf.CMSCFinderException: Workspace name does not exist: com.sap.cms.util.exception.conf.CMSCFinderException: Workspace name does not exist: version=0,dtrWSName=
Check the availability of the CMS and the user authorizations and send the transport request again if necessary
We are on SP16. Anyone encountered this issue?
Regards,
Jay

Here are all of roles we have given LSADMIN in client 100:
SAP_CMS_ADMINISTRATOR
SAP_SLD_DEVELOPER
SAP_SLD_GUEST
SAP_SLD_ORGANIZER
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_CMS_SERV_USER
SAP_XI_CMS_SERV_USER
SAP_XI_DEMOAPP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
But on the J2EE side, we only see the following roles for LSADMIN:
- Authenticated Users Built-in Group Authenticated Users
- Everyone Built-in Group Everyone
- SAP_XI_CMS_SERV_USER Exchange Infrastructure: Change Management Service User
I checked client 000, and noticed that LSADMIN only had the SAP_XI_CMS_SERV_USER. So this the problem. I added all of the roles to LSADMIN in client 000 and restarted J2EE and now i can see all of the roles under the LSADMIN user in UME.
We noticed the problem that our UME configuration was pointing to client 000 and not client 100. If we go to Visual administrator and go to the Services->UME Provider, we see that - ume.r3.connection.master.client points to client 000. We will need to change this.
That was the issue. UME was pointing to the wrong ABAP client. I appreciate all of your help.
Regards,
Jay

Transport using CMS Export Error on Integration Repository

Hello
We are transporting an maximo-integrate,max60-ERP2004 via export mode
Transport using CMS. Got an error during export. The error says :
"Workspace was not defined for software component version Maximo-
Integrate,MAX60-SAPERP2004 of mro.com
Assign the software component version in the landscape configurator of
the change management service to a track."
As already software component version Maximo in the landscape
configurator of the change management service to a track has been
defined.
The Software component (SWCV) has already been defined on CMS. But still getting the error.
Please advise anybody comes across these type of error.
Thanks & regards
AK

Thanks sumit for reply. Here is the information:
Yes I choose Repository Type : XI
Track ID : IR.ERP
Track Name : IR.ERP
Track Description : ERP System : XI Integration Repository Objects
XI URL Development : http://sap03.ab.energy:50000/rep/
XI URL Consolidation System : http://sap03.ab.energy:50100/rep/
Because we have 2 system landscape.
ADD SWCV
MAXIMO-INTEGRATE mro.com MAX60-SAPERP2004 Source
But on Domain Data:
CMS Name : XID
CMS Description : XID
CMS URL : http://sap03.ab.energy:50000
CMS USER : LSADMIN
CMS Password : XXXXX
Domain ID:XID
Domain Name:XID
Domain Description:XID
SLD URL:http://sap03.ab.energy:50000
All the information is correct. Above thread is not suitable.Then Why I am getting the error message.
Please advise..
Thanks & regards
Sanjay

Transport using CMS between Dev, Qual and Prod

Hi,
I'm a little bit curios if there are others out there using CMS for transport in a XI production line -
Dev -> Qual -> Prod.
My company is using it, and it seems to me that at consolidation stage, you can only select transports related to a SWCV and NOT select transports individually or related to a namespace?
Anyone?
Our version is XI 3.0 SP14 latest patch.
best regards
Torstein Nesby

Hi Torstein,
I saw your other threads related to this as well as your thoughts on 'Quality Feedback' (which I agree with btw). It sounds like you may have been able to come to a resolution to a problem that continues to cause me issues. Can you review and provide some guidance on the following please?
Current Environment / Setup:
- XI 3.0 system, SP12
- Single SLD with appropriate Group / transport Targets setup
- Single IR Track, Single ID Track
- CMS usage for transports. Successful from Dev to QA, QA to Prod has not yet been attempted.
- SWCV are setup in IR and are specific to tech system / product. For example there is a SWCV for Peoplesoft where all related message / data types for Peoplesoft are located. There is another SWCV for SAP, another for Oracle, etc.
- Message Mappings and Interface Mappings are created in the target SWCV. This means that a single interface will normally consist of 2 SWCV to be migrated.
- Currently migrations are bundled in Transport (export) lists vs change lists when migrated out of the Dev environment
- As an aside, I understand the approach of effectively setting up a SWCV per interface with Usage dependencies across SWCV's for reuse of data / message types, however this is the architecture that was recommended at the start of development for this first release.
What I am attempting:
- In the Assemble tab in the transport Studio I want to be able to use a 'Subset Assembly' option to selectively choose which transport / change lists to allow to go to production.
- Based on reading the SAP Help in the XI system, numerous SDN Posts, the SAP docs "Using CMS for XI 3.0" and "How to Transport XI Content Using CMS" it appears this option should be readily available for both the IR AND ID.
Issue:
- For both the IR and ID when I go to the Assembly tab and get the subsequent popup (after "Assemble Components") the "Subset Assembly" option is not visible. Supposedly when going to this Assembly tab, selecting a specific SWCV (not the default 'All Components' option), and choosing "Assemble Components" generates a popup with a checkbox listed for "Subset Assembly". I get the popup in both the IR and ID but the "Subset Assembly" checkbox is not part of the window.
The docs are somewhat unclear in this area. It alludes to seeing this option after the initial migration to Prod is done (which again we have not done yet), but only mentions this in the context of the ID. Another doc alludes to seeing Emergency Transports created in CONS (QA) as if that may be a pre-req to having that option, but is a weak reference.
Can you advise on:
1) Do you see the "Subset Assembly" option in the popup?
2) If so:
a) Did you see it prior to the inital migration to Prod?
b) Do you see it for both the Directory and Repository in the Transport Studio Assembly?
3) Any other thoughts on why I'm encountering this issue?
Thanks for your help!
Darin

Error when transporting using CMS

Hi,
Please ssist.
We are on PI 7.0 SP17. We want to transport using CMS from Dev box to Prod system. We get to export steps. Select Mode, able to go pass, Then Select Objects We select them and Click on Finish(at bottom of pop-up screen). "correct mark"Then We get Transport Using CMS. Trnsport request generated and released for transport using CMS, Shoose Tools-> System Messages to display result. Then after a few minutes the screen pops a long message.
"Sent on 11/18/09 at 10:39 AM: CMS (server: http://server:port) cannot export the following transport lists:
Export list (send time = 11/18/09 10:39 AM, component = Default Software Component, ID = e10bf190d41d11dead8f00096bdd826a)
Details: com.sap.aii.util.misc.api.BaseRuntimeException: Reading GDI ... FAILED. Source is not well formed. SAXParseException at line -1, column -1. Details:
Message: Generic Exception:
Stacktrace: com.sap.engine.lib.xml.parser.NestedSAXParserException: Generic Exception: -> com.sap.aii.util.misc.api.BaseRuntimeException: Parsing generic data instance: begin of unexpected element "html"!"
Regards
Scharlotte

Check if it is a password-related issu as mentioned here: Error when defining Xi-track in CMS
Regards,
Abhishek.

Problem about deploying Enterprise DCs using CMS

hi everyone.
we currently are using NWDS04s sp10.
Using CMS, we transport development DCs to Product System.
However, Enterprise Portal DCs are not being tranmitted.
Other WDJ DC, Dic DC, ExtLib DC, etc. are well transferred.
Is it also possible to send Enterprise Portal DC over CMS?
If possible, pls let us know in which case the Enterprise Portal DC can't be transmitted.

Kindly check this link:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/c5/56599164d0c04cb566ba0e2d7ed55c/frameset.htm">Transport of Portal objects</a>

Could not see Transport using CMS in Integration Directory

Hi,
I have Changed the Parameter setting to true in Integration Builder for Integration Directory and Integration Repository. When i login into Integration Directory i cannot see the option Transport using CMS in Export. I can only see Transport using File system.
Please help me out in configuring the CMS correctly.
Thanks,
Fahad

Hi Fahad,
This thread answers ur question
CMS Transport mode unavailable in Integration Directory
cheers,
Prashanth
P.S Please mark helpful answers

Problem in Transport of ID objects using CMS

Similar Messages

Maybe you are looking for