Problem in transporting cubes

Hi All,
We have transported few cubes along with transformations,DTPs.
All went fine to quality except one property.
In the infoprovider properties(Environment->infoprovider properties->Rollup)Do not coolapse aggregates is selected in Development but when it is transported to quality it is unchecked.This happened before also.Please let us know why it is happening?(All others including formulae,routines are being transportd correctly).Should we change any settings to avoid this problem?
Thanks,
Manohar

Hi,
These are the new cubes.So overwriting issue will come into picture,I guess.
Any how import of requests into BQA is automated.So I don't have exact information.
Thanks,
Manohar

Similar Messages

Problem Reloading Info cube after Transport

I have made some changes to a cubes dimensions. Then I transported these to Test and loaded the cube there, all worked fine. Then i deleted all the data from the same cube in production before transporting it up.
In production my cube was clean and ready to be reloaded. When kicking off individual info packages I am recieving this message.
"No requests are deleted from your info cube ZEXTSERV (Provisionally, as routine, and formula evaluations for the runtime of other selection conditions can occur.
I then gives me the option to either continue or cancel. I pressed continue and the data loaded fine........because I knew I had already deleted old requests before transporting.
***all my loads are full loads....not deltas.
Will this cause a problem if the info packages are in a process chain???
I am using BI.7
Please help

there shud not be any problem in that..
Did u deleted the total content from the cube? I mean both Fact table as well as the Dimension table as well?
I dont think that there will be any more problems in ur cube...
Just look at one more load to ur Cube.. I hope that this message wont come once again....!!!
Will this cause a problem if the info packages are in a process chain???
NO... its not the issue..
Thanks

Problem in transporting authorization object

Hi,
I am facing a problem in transporting the authorization object. We have an existing cube in development and production. In production the object has 3 authorization objects checked. Now I want to change the authorization object assignment in my cube. So I changed the assignment in the development, but when I tried to transport the authorization object it collected all the cubes where the authorization object is used.
I want to transport only the authorization object associated with that cube, not all. I understand that logically if we are transporting the authorization object from RSSM, it takes all the assignments. But I don't want to do that because there may be some inconsistencies between the system.
Can you tell me weather we have any other way, so that the authorization object is transported only for one particular cube assignment not all.
Thanks in advance
Prashant

Hi,
I tried that but not getting anything.
Can you please tell me the steps.
Steps I have done are as follows.
1. Go to RSSM and select the authorization object.
2. We have a button which says transport authorization object. I clicked on that.
3. I got a list of all the authorization objects there. I selected my authorization objects and clicked on Transfer Object button.
4. Then I get the hierarchy authorization objects.
5. After that I selected a request and everything is included in that request. I didn't got your above mentioned option.
Do you want me to go to the table RSSTOBJDIR and delete all the other entries??
It would be great if you can tell me the steps to do that.
Thanks in advance
prashant

Problem while transporting transfer rules in BW 3.5

Hi All,
I have a problem while transporting transfer rules in BW 3.5.
I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
The selections T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
Diagnosis
You need to select an individual DataSource based on the selection conditions
InfoSource =
Source System =
Object Version = T
Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
although the select event is not unique.
Procedure
Check the objects to which the selection applies.
Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
Regards
Lakshmi

Hi Lakshmi,
Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
Also make sure that the Transfer rules are active before it is transported.
Hope it helps!
Regards,
Pavan

Problem during transport

Dear All,
Now i meet a problem during transport my ABAP in dev to prod server. Not sure is BASIS or my problem.
The error is "Request after end mark"
One more question is for the transaction code STMS, the status for production server should be LOCK or IMPORT QUEUE IS OPEN? If it should be IMPORT QUEUE IS OPEN, how i going to do it cos now our status is LOCK?
Thanks for ur help....
regards;
jee

Hi,
The "Request after end mark" will be displayed due to the following:
Requests after the end mark are not imported during the next import. The end mark is automatically deleted only when the next import has completely ended. Afterwards, the requests can be imported. You can see the legend information in the following website:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a3847acc11d1899e0000e829fbbd/content.htm
However, as per your questions I understand that the TMS configuration is not proper. Can you check the r3trans and the transport routes/layers again and see what is missing?

Problems when transporting from DEV to PROD

Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon Sulvaran

The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail

Problem in Transporting Function module

Hi,
I have created a bapi(RFC).
For testing I created several copies and Bapi Object and the last version got sucessful .
but now I am getting problem in transportation, I have included the FM and Function group in the new request no but the include program is not taking the new request no and and when I am going to version management there is no no.
can anybody help me for this??
Thanks and Best Regards.
Kusum.

hi,
Pl post questions [SAP Business One] forum questions only.
Pl close thread.
Jeyakanthan

Problem in transporting change document

Hi guys,
I have created one change document for customized field.
I m getting problem while transporting this change document.
The view is not generating in production system.
Function group is coming blank for change document object in production.
Is there other way of generating the change document ???
Kindly reply.
Regards,
Siya

Check this.
1. Deletion flag is set or not.?
2. Execute MCDOKDEL and check for the document
3. Archiving path Storage Path location.?
Thanks
S.N.

Problem in transporting WPC Content

Hi,
I am facing problem in transporting WPC Content from server1 to server2. After transport the webpages are not displaying the contents. Webpages are showing empty layouts. I have done the layout configurations. Webpages are cotaining iViews and Html contents from KM . The webpages are not allowing to edit. Its very urgent.Help me to get through this.
Regards,
Mallini.V

Hi MaliniV,
Before you transfer the WPC content from one server to another, you need to be very careful about the settings and configurations. Did deply the WPC on the other server ? Did u do any custom page layouts in development server ? if yes, you need to do the same in production server as well. if not , it won't work.
I too had the same problem before. but ! after checking all these , I corrected them.
I hope this will help u.
Thanks
Suresh

Problem in transporting the component Controller

Hi Friedns,
We had a problem when transporting a WD Componenrt controller. Til Quality it when ok. But when the transport reached to production we saw that from the attributes tab of the Componenrt controller the WD_ASSIST WAS MISSING . Due to which it was giving a dump. We recreated a new transport and sent it but that didnt worked to .
Can anybody advise any solution. In the dump it is saying Component ZBASE_RATE CONTAINS SYNTAX ERRORS.
THANKS
Rohit

Hi,
It might be difference of the environments in ur quality and production systems.
Check whether both systems are having the same level of webdynpro patches.
You can check with ur basis people for this clarification.
Regards,
Veerendra Nath

Problem in transporting the text elements for user exit EXIT_SAPLV09A_002

Hi All,
I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
Regards,
Sachin
Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PM

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

Problem in transports!! Please help

Hello BW Gurus,
I am havinga major problem with transports.The Client had separate HR box as the source system for HR Objects.
Since the HR box is obsolete, we assigned SAP R3 as the new source system to infosources and activated them.
I created a transport by collecting at the transfer rule level. The transport is failing saying it cant fing the SAP source system.
Post-import methods for change/transport request: BWDK960528
Follow-up action RS_AFTER_IMPORT for IOBJ L started at 20060203130629
Start of the after-import method for object type R3TR APCO (Activation Mode)
Start of the after-import method for object type R3TR IOBJ (Activation Mode)
Characteristic 0LANGU: Lower case makes selection of char. values difficult
Start of the after-import method for object type R3TR ISFS (Activation Mode)
Source system SAPTDV210 does not exist
No mapping defined for source system XXXHRP210
RFC connection to source system XXXHRP210 is damaged ==> no Metadata upload
Source system SAPTDV210 does not exist
Start of the after-import method for object type R3TR ISMP (Activation Mode)
Source system SAPTDV210 does not exist
No mapping defined for source system XXXHRP210
Source system SAPTDV210 does not exist
Start of the after-import method for object type R3TR ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 0ACTIONREAS_TEXT_BA not available. No activation possible.
There is no DataSource with these attributes
Reference to transfer structure 0ACTIONTYPE_TEXT_BA not available. No activation possible.

hi Simmi,
seems several errors
1. first you have to do source system mapping in your TARGET system (or you have to do correction since you change to new source system), from the log, i assume SAPTDV210 is the new SAP assigned (in bw dev/source), and e.g your target is SAPTQA999 then in SAPTQA999 do rsa1->tools->source system mapping, and fill up SAPTDV210 in 'orgsrc..'(first column) and SAPTQA999 in 'trgsrc..'(last column?) and save.
2. XXXHRP210 ? if this system still exist, right click this source system and 'restore'.
3. 0ACTIONREAS and 0ACTIONTYPE datasource doesn't exist in target system, in target system have you replicate from r/3 ?
if problem not solve in one go, would help if you specify bw dev name and target name, also r/3 new and old.
hope this helps.

Problem in Transport Request

Hi All,
I am trying to transport the contents of a Z table from one client to another client using sm31 transaction.
When i tried to do this, i am getting the problem like
"Transport is not possible for the specified data".
the table type is: Master data, Transparent Table
Moreover this table is having three fields and all are Primary key fields.
Any one have idea how to solve this problem?
Thanks in advance.
Ram Sri

Hi ram,
1. delivery class
2. make the delivery class of your z table
to 'C' (customizing)
3. then it will ALWAYS ask
for request,
whenever u create new entries into this table.
(via sm30)
4. make sure u save and activate the table.
also delete and re-create the table maintenance.
regards,
amit m.

The Query Could not be saved due to a problem in Transport

Hi All,
we move the data from DEV to QAS but in the QAS when you are going to save as query giving this error
error: The Query Could not be saved due to a problem in Transport
can any one please tell me the solution for this
thanks
sidhartha

Sidharth,
When you create a transport request for queries in Transport connection, what is the grouping condition you have taken and also please be ensure that all the query elements have to be selected to transport that query.. Please check whether all the elements have been selected or not.. You can check this out in SE09 under your request.
Hope this helps...
****Assign Points****
Thanks,
Gattu

STMS problem with transport import

Hello all
I had a problem with transports in STMS.
Log history of imported transport didn't show any error and simophore is green.
But in target system data element wasn't presented.
When i import this transport again - it's all ok.
It happened twice. And i didn't find any solutions yet.((
Did anyone have the same problem???

Start import LIMUMETH/NPQ/CL_RESERVATION           SPLIT_RESERV ...
0 entries from SMODILOG (CLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
0 entries from SMODISRC (CVCLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
0 entries from SMODISRC (CUCLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
0 entries from SMODISRC (PRCLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
0 entries from SMODISRC (SVCLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
0 entries from SMODISRC (CICLAS/NPQ/CL_RESERVATION                     METH/NPQ/CL_RESERVATION           SPLIT_RESERVATION
method SPLIT_RESERVATION                                             include /NPQ/CL_RESERVATION===========CM01Z      will be impor
REPOS /NPQ/CL_RESERVATION===========CM01M      A replaced.
End of import LIMUMETH/NPQ/CL_RESERVATION           SPLIT_RESERV
E071-LOCKFLAGs 000016 - 000016 updated ('2', 1 entries).
E071C entries 000016 - 000016 deleted (1 entries).
report /NPQ/CL_RESERVATION===========CM01M      (L) synchronized.
report /NPQ/CL_RESERVATION===========CP         (L) synchronized.
169836 5330910
LIMUTABD/NPQ/LOCATION_HIERARCHY_QRY was not imported in this step
LIMUTABD/NPQ/RESERV_ROOM_SERVICE_STR was not imported in this step
LIMUTABD/NPQ/RES_SERVICE was not imported in this step
LIMUTABD/NPQ/RES_SERVICE_DETAILS was not imported in this step
Start import LIMUWAPP/NPQ/FM                       SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM                       SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM                       SERVICE/GETS ...
Start import LIMUWAPP/NPQ/FM_NEW_DESIGN            SERVICE/CREA ...
Start import LIMUWAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETS ...
0 entries from SMODILOG (WAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIO
0 entries from SMODISRC (CVWAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (CUWAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (PRWAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (SVWAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCAT
0 entries from SMODISRC (CIWAPA/NPQ/FM_NEW_DESIGN                      WAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCAT
0 d /   0 i /   2 u /   1 = 33% ucf O2PAGCON
3 entries for O2PAGCON imported (TR/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d /   0 i /   1 u /   0 =   0% ucf O2PAGDIR
1 entry for O2PAGDIR imported (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d /   0 i /   0 u /   4 = 100% ucf O2PAGDIRT
4 entries for O2PAGDIRT imported (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 d /   0 i /   0 u /   1 = 100% ucf O2PAGEVH
1 entry for O2PAGEVH imported (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from O2PAGPAR (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY                                  %) d
0 entries from O2PAGPAR (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY                                  %) d
0 entries from O2PAGPART (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY                                  %)
0 entries from O2PAGPART (/NPQ/FM_NEW_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY                                  %)
0 entries from SOTR_USE (LIMUWAPP/NPQ/FM#_NEW#_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USE (LIMUWAPP/NPQ/FM#_NEW#_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USEU (LIMUWAPP/NPQ/FM#_NEW#_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
0 entries from SOTR_USEU (LIMUWAPP/NPQ/FM#_NEW#_DESIGN            SERVICE/GETSRVPOINTLOCATIONHIERARCHY
End of import LIMUWAPP/NPQ/FM_NEW_DESIGN            SERVICE/GETS
R3TRDTEL/NPQ/DELIVERY_POINT was not imported in this step
R3TRDTEL/NPQ/SRV_POINT was not imported in this step
E071-LOCKFLAGs 000021 - 000025 updated ('2', 5 entries).
E071C entries 000021 - 000025 deleted (5 entries).
DEVK902177           touched.
table O2PAGDIR (R) synchronized.
1 tables in P-buffer synchronized.
2 tables in R-buffer synchronized.
42832 5373742
158359 bytes read.
Transport overhead 15.3 %.
Data compressed to 5.3 %.
Duration: 14 sec (11311 bytes/sec).
1 0
Summary:
15 REPOS imported.
Totally 15 Objects imported.
Totally 1551 tabentries imported.
5373742 bytes modified in database.
[dev trc     ,00000] Thu Mar 03 18:26:16 2011                                             13410099 13.410099
[dev trc     ,00000] Disconnecting from ALL connections:                                       21 13.410120
[dev trc     ,00000] Disconnecting from connection 0 ...                                       33 13.410153
[dev trc     ,00000] Now I'm disconnected from SAP DB                                        4897 13.415050
[dev trc     ,00000] Disconnected from connection 0                                            63 13.415113
[dev trc     ,00000] statistics db_con_commit (com_total=17, com_tx=17)                        26 13.415139
[dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)                      25 13.415164
Disconnected from database.
End of Transport (0000).
date&time: 03.03.2011 - 18:26:16
Main import
End date and time : 20110303182616
     |   Ended with return code: ===> 0 <===

Problem in transporting cubes

Similar Messages

Maybe you are looking for