Problem in Transporting the Request
Hi Frds
i wants to transport the Module program(ZSAPMKKAA) to quality ,i have created a request number .But the screen,gui status,gui titles are not coming under that request.
Kindly any tell me how to bring all the objects in one request.
Thnaks
By
Pari
Pari,
i hope you already realease you request when you already tried for transporting request to QAT.
than when you save again all object from SE80 than you need to save all things into one Request.
either you can in se10 put cursor on request than press cntr+f11 to merge objects.
Amit.
Similar Messages
-
OM problem in transporting the request
Message no. 5W612
Diagnosis
The system has transported a relationship to the specified object of an object currently being activated. However, the relationship cannot be activated.
The problem is usually caused by the related object not being available in the target system.
System Response
The object is transported correctly but without the specified relationship.
Procedure
Make sure that the related object is available in the target system, or that it is included in the same transport request as the current object, before you repeat the transport.
If the related object is not required or must not be available in the target system, no further action is required on your part.
can any one tell me on thisHi Sikinder,
You can try with OM reports like,
RHINTE00 - transfer organizational Assignment.
RHINTE10 - prepare Integration.
RHINTE20 - Create missing Objects
RHINTE30 - ransfer Org.assignment in batch input folder for infotype 0001
These reports may help you to find the relationship where you can have so many selection options.
I think defiitly these will help you.
Reward me if helps,
Vasu. -
Problem in transporting the text elements for user exit EXIT_SAPLV09A_002
Hi All,
I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
Regards,
Sachin
Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PMHello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful -
I have a problem with Transport the personalization of standard ess compone
I have a problem with Transport the personalization of standard ess component.
My problem is in several components, such as:
portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.area_personal_information/persinfo_es/com.sap.pct.erp.ess.13.pdata
I have personalized this page (into rol, not directly in the page), with Ctrl+Right button.
Now i transport the rol, from Development to Quality environment, but i don't see the changes in Quality.
My system is NW 7.01 SP7, Can be that the problem?
Any idea to solve this problem?First please see note 1234273 which details how best to personalize
for all users.
http://help.sap.com/saphelp_nw04s/helpdata/en/42/ed3ce7f8593eebe10000000
a1553f7/frameset.htm
Here you can read:
"If an iView is transported to another portal all these properties are
also transported. This is needed to make sure that role-specific changes
could be transported together with the role. End user personalization
data is NOT transported in this way as end user personalization is only
local to the current portal."
Could you please ensure that personalization was done by an admin user?
I'm afraid that if it was done by an end user, personalization isn´t
transported as it's explained in the documentation provided.
Could you please confirm whether you are using exactly the same language
to access to both systems, development and quality? Maybe you are using
language en(us) in one system and en(gb) in the other one. Please take
into account that personalization is language specific.
From the web dynpro end, the WebDynpro personalization is stored
NOT in the PCD prior to 710 release. And as such it cannot be included
in a portal role transport. This feature is available with NW 7.10 SP2
or later (from webdynpro point stand). The best option is to
go with NW 7.30 as this is the first NetWeaver release with EP since
NW 7.02. -
Problem in Releasing the Request
Hello,
I am trying to release the request which is targetting to one of the available system (say QAS)
When clicking the release button, I am getting the error message as below :
=========
Test call of transport control program (tp) ended with return code 0232
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK EBDK900238 pf=
ECCECB\sapmnt\trans\bin\TP_DOMAIN_EBD.PFL -Dtransdir=
EC"
which checks the export requirements, returned the following information:
Return code from tp: 0232
Error text from tp: ERROR: Connect to EBD failed (20081202235756, prob
System Response
Further processing is terminated.
==============
Any idea how do we overcome this?
Thankshi,
I have the same issue long back.
It is purely Basis issue just tell them the problem and they will solve it. -
Error while transporting the request from quality to production of BI
Dear all,
When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
Execution of programs after import (XPRA)
Transport request : RBDK904992
System : RBP
tp path : tp
Version and release: 372.04.04 700
Post-import methods for change/transport request: RBDK904992
Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request RBDK904992 completed
Start of subsequent processing ... 20080406140407
End of subsequent processing... 20080406140408
Execute reports for change/transport request: RBDK904992
Reports for change/transport request RBDK904992 have been executed
Start of................ 20080406140408
End of.................. 20080406140408
Execution of programs after import (XPRA)
End date and time : 20080406140408
Ended with return code: ===> 8 <===
Thanks in advance.
Regards,
M.MHi,
First try to figure out the object type from the text obtained by following steps above.
Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
Hope it helps.
Regards
Mr Kapadia -
Problem by transporting the message mapping from PI 7.0 to PI 7.1
Hi Everyone,
by transporting the message mapping from PI 7.0 to PI 7.1 i have got the following problem.
"Source code has syntax error:
K:\usr\sap\E71\DVEBMGS00\j2ee\cluster\serve......
package udfpool does not exist
import udfpool.*;
i have used a UDF in my message mapping.
This UDF calls for a method of a java class, which is imported as a .jar file with this message mapping.
this message mapping works very well on PI 7.0,
but doesn't work any more on PI 7.1 because of the problem described above.
anyone can help me out of this problem?
thanks!
zchi,
but did you import the jar archive to 7.1 first?
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ -
Problem in assinging the request to the InfoObject
hai
I transport the InfoObject to QA system .
Now i changed some navigational attributes of that InfoObjectin development system and try to give the request to that InfoObject and try to activate it. But it says like this
Changes to Objects are only allowed in correction/repair
And looked into the cooresponding help , it is like below
Diagnosis
Repository and customizing objects can only be maintained within the framework of a task: (correction in the original system and repair in all other systems). Request DVBK946652 is not a task.
System response
The function terminates
Procedure
Select a task in the Transport Organizer (SE09) and repeat the function.
Please tell me
what i have to do
rizwanrizwan,
you would have to create another request..
Arun -
Problem in deleting the request from ODS......
Hi,
I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
Can some body let me know how to STOP/DELETE the old request?? I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
Thanks JeetuHi Jeetu,
Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
Hope there will be large volume of data !
Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
I too faced the same issue but i am helpless i could not stop the data load inthe middle!
If you found any solution for this let me also know
Thanks
Ram -
Problem in transporting the objects(very urgent)
hello Experts,
I have saved my tables , domains,data elements and programs in local object.Now i want to tranport into production server,For that i have to save this objects in some request.How to do that.Please give me the solution .
Thanks in advance
regards,
Ashok.hi,
Please follow below steps to handle the same:
1. Go to Transaction: SE10.
2. Create a new workbench request by using key F6.
3. Double on the newly created request
4. Add a new entry: R3TR,TABU,<table> for Program Id, Object Type and Object Name Respectively.
<table> being the table name for which the contents are to be transported.
5. Click on Function icon next to table name.
6. Click the contents from the icons in next screen.
7. Select entire table.
8. In next screen we can select required entries to be transported.
9. Come back and save.
10. Now release the request and transport to the required server.
Rgds
Anver -
Problem in transporting the component Controller
Hi Friedns,
We had a problem when transporting a WD Componenrt controller. Til Quality it when ok. But when the transport reached to production we saw that from the attributes tab of the Componenrt controller the WD_ASSIST WAS MISSING . Due to which it was giving a dump. We recreated a new transport and sent it but that didnt worked to .
Can anybody advise any solution. In the dump it is saying Component ZBASE_RATE CONTAINS SYNTAX ERRORS.
THANKS
RohitHi,
It might be difference of the environments in ur quality and production systems.
Check whether both systems are having the same level of webdynpro patches.
You can check with ur basis people for this clarification.
Regards,
Veerendra Nath -
Problem while releasing the request
I created a customized Z report from the existing standard SAP report and also created a new tcode into the development server, and released the request via se09 into quality server. Now when I try to execute this tcode in the quality server, its giving me a error message 'status STANDARD of the user interface ZRM06ENDR_ALV missing'. Due to which its not displaying various push buttons like 'print preview' 'messages' etc. However its working fine in the dev server
You should creat GUI status. You can copy it from another report by clicking right on the gui status from which you copy. Then specify the target report. Then in your Z report activate the gui status. Also write the code below:
form alv_menu using rt_extab type slis_t_extab.
set pf-status 'STANDARD_FULLSCREEN'. " Write here your gui status' name .
endform.
In call function reuse_alv_grid_display set i_callback_pf_status_set parameter as 'ALV_MENU'. -
Problem in deleteing the request
H All,
We ran a load to Master Data (info provider)object.The Load got failed due to invalid data entries.Wheb i tried to dele that particular request from infoprovider .Request is not getting deleted and got folloed msg.
You want to delete request(s) from InfoProvider 0AUVEHICLE
The data target is a master data table
The records in the request are no longer transparent in the table
Only the control entry that shows that the request has been updated
already, is deleted.
This means that the request can be updated again.
Can you please help me in deleting this request.
KranthiKranthi,
This means that even though you delete the request - the master data entries still remain. This happens for Master Data.
You will have to delete the same and reload the data back in.
For example if you data load has :
1|BCD|Sales
and this is part of your master data load , even if you delete the request the entry is not deleted - the entry still remains - you can delete the request in the manage atb and reload the data once again.... SAP is just givig you information that Master Data Objects are not like a DSo where if you delete the request the entries go away. This is because the Infobject tables do not have any request based data - al the data gets updated into the same tables and once you load the data - the data remains there till a manual delete is triggered and request based deletion is not possible... -
Problem in WAD (The requested query / does not exist on the current server)
Dear Guru's
When i execute a Web Application in WAD in the selection screen suppose if i give Key product as 86000 then check and execute i get correct data. Then if i come to backpage (Selection screen again using backspace) and change Key product as 86022 then check and execute then i get following error
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Can any one please provide me some good solution...
We are using BI 7.0 sp 16, But i am executing this Wed Application in 3.1WAD.
Thanks and Regards,
kalyanDear Jai,
Issue is in WAD selection screen for first product valuse every thing if fine, when i go back and change product value and then CHECK and EXECUTE the following error comes.
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Any one have any idea plssssssssssssssssssssssssssssssssssss..........
dude's some soln.....
Thanks and Regards,
Dev
Edited by: Srinivas dev on Jul 4, 2008 2:45 PM -
After Transporting the request RFC Destination is empty in SWCV and BEA
Hi All,
we are using SAP NW Mobile 7.1 SP08
After transporting the SWCV & Backend adapter, in the transported system the RFC Destination is empty
Please help me to fix this issue.
Thanks and Regards,
Joseph Beevin.Hi,
When an SWCV is trnasported to a another system,the backend destination will be empty in the target system.,We need to configure the bakcned destination in the target sytem through the DOE Adimin.
DOE_ADmin Portal -->Configuration --->Backend Configuration.
In the backend configuration,select the SWCV for which the destination needs to be configured.Select the parameter "RFC DESTINATION FOR BACKEND"
When the SWCV is selected all the active Data Objects will be listed in the table below
Insert the above parameter to the parameter list(the table below)
Give the name of the availlable backemnd destination name in the "text value" column of the table for each data object and save it.
Now the backend destination is configured correctly in the target system.Please try this..
Regards,
Muralikrishna T.
Maybe you are looking for
-
Circular linked list while loop
i have a circular linked list and i'd like a while loop to iterate though all of them. my problem is that it always excludes the last node. i know why, it's due to the fact that "current.next != alive" skips it from ever accessing the last node. i ca
-
How to transfer movies to imac
How to transfer movies from iphone to imac
-
IDOC File target - file not getting created
I am using Realtime job for sending idoc from data services to sap. I am using idoc message as source, query and idoc file as target transform in the data flow. I have following settings in IDOC file as target Idoc file : /tmp/costcentertest.txt Idoc
-
my ipad is not showing the apn settings when i selected cellular data option on settings? y?
-
Camera Raw support for Nikon D810, using Photoshop CS 5.1
I know the last update supported the D800 - can we please get support for the D810 on Photoshop CS 5.1 (version 12.1 x64)?