Problem in update firmware

hello my dear
i have mobile nokia 6680
i try to update mobile from Internet
but suddenly switch off and my mobile now become not working
only logo for nokia and not working
CAN YOU HELP ME ?

you can follow the advice available here :
/discussions/board/message?board.id=swupdate&thread.id=36350
Fear not those who argue but those who dodge

Similar Messages

Problem for update firmware via FOTA (N79)

hi friends
i have N79, firmware v31.002 , i have come to know that new firmware v31.101 is out for nokia n79,
i tried to update firmware via FOTA, it shows "server not responding", i thought server might be busy at that time,
but i tried for two days it shows the same reply, i dont know whether my phone has any problem with that,
pls help me
thanks/regards

v31.002 is the latest version available till now in India for N79, I just checked, so no hurry at all.
regarding server not responding you may check options -> settings after *#0000# & it should have nokia as selected profile.

Problem with update Firmware and Fax with m276nw

Hi
First of all sorry for my english...
I have two problems
1) I can't update the printer in wirelless mode, I mean the update program (version 2014-08-05 , Version 20140718, 12.05M) and the printer work but finally the printer is not updated.
How can i do it?
2) I'd prefer to forward fax in email or in alternative I'd want to read in a web interface. In this case I have a suggestion: An update could be the way.
Thx
P.S. Sorry again

Hello @Compyweb,
Welcome to the HP Support Forums!
I would like to assist you today in resolving the firmware update issue and the fax forward to email issues that you're experiencing on your HP Laserjet Pro 200 Colour MFP M276nw. I understand that you have been trying to update your printers firmware via the wireless connection but your printer does not want to do that. I'm going to provide you further instruction on how to properly update the firmware.
How to Properly Update Firmware:
It is best to update firmware through a USB Cable connection. This is because the firmware update will reprogram your printer. Sometimes with wireless connections there can be intermittent communication. If the firmware update is interrupted in any way while the printer is being updated it can cause a programming failure on your printer. If this occurs you most likely would need a printer replacement. Also, a firmware update gets sent to your printer much like a print job. Therefore, you need to ensure that you do no have any print jobs in queue waiting to print before you update the firmware.
What I would suggest doing is running the HP Print and Scan Doctor Tool. If you run this tool and select 'fix printing' than the tool will run a scan on your computer and ensure that the connection, software and driver are all properly setup. If the HP Print and Scan Doctor identifies any issues it will attempt to resolve them for you. I suggest installing the printer for USB connection before running this tool as you want to run the firmware update through USB.
HP Print and Scan Doctor
Once you run the HP Print and Scan Doctor Tool and get the all clear that everything is set up properly than you can run the firmware update. Please click on the following link for the proper firmware download:
HP LaserJet Pro Series Firmware Update Utility
Once the utility is downloaded, you want to run the tool and send the firmware to the printer. The printer may turn itself off at the end of the update, just turn the printer back on if it doesn't turn on automatically.
In terms of wanting to forward faxes to email or an alternative option like receiving faxes in a folder on your computer, these are not options that you have with your HP Laserjet Pro 200 Colour MFP M276nw. As the specs for your model printer: LaserJet Pro 200 color MFP M276nw Specs indicate you only have the option to send faxes from a computer.
Should you still want to receive faxes to your email you could check out the third party service: Efax
However, I believe you may have to pay for this service. Also, should you have any issues with the Efax service HP does not support this on your product. That means that if you need technical support for efax you need to speak with efax regarding this. For further information regarding Efax, please visit: Efax: Easy faxing anywhere
Please let me know if this information resolves your issues. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Problem with updating Firmware

Nokia 3250.
At attempt to update firmware _Nokia Software Updater_ writes " Your phone software is up to date. If you want, you can reinstall it.
Nokia 3250 (RM-38)
Firmware version
Current: 3.24
Update: 3.24
As far as I know, last firmware version is 4.60
How I can update firmware up to version 4.60?
Help pls

I don't know, I'm not affiliated with Nokia at all.
You can ask/email Nokia on the "Contact us" page.
Feel free to hit the KUDOS button if you think I deserved it.........

Problem when updating firmware

This morning itunes asked if iwanted to update the firmware on my 16gb ipod touch so i did. half way thourgh it said was unable to update now it just gives me the Connect iPod touch to iTunes screen when i do it says to restore and update and when i try that it just gets half way and says unable due to error.
has any one else had this problem? If so could some please help.

What security do you have on your computer. McAffe has a special firewall that can be accessed for block Potentially Unwanted Programs, but I don't know how to turn it off. You may want to contact McAffe personally.

Problems since updated firmware

I updated the firmware on my Blackberry to 5.0.0.592.
I've got the Blackberry 8520 & my carrier is Virgin.
Ever since I updated I've had the following problems:
- When I change my theme it changes the wallpaper to the default wallpaper of that theme but when I press the blackberry button and go to the menu the background is that of the previous theme I had.
The only way to get rid of this I discovered is to revert the theme to it's initial settings.
- Second problem is that the media folder has completely disappeared.
It's not hidden, I've checked that. When I go into the Downloads folder I have Music, Video & Pictures.
Thanks in advance for you help.

I've now come across another problem:
I can only browse the internet whilst within Wi-Fi range

Problem when updating firmware on Time Capsule

Hello,
For some reason I cannot update my Time Capsule's firmware. The update starts but is then stop and the dialog that appears refers to an unexpected problem. On one occasion the number "54" was in the dialog as well. Any idea anyone on how to solve this?
BR/Anders

Cannot say I have ever seen one fail..
Reset the TC to factory.. full factory reset.. hold in the reset button and power on the TC.. keep holding for 10-15 sec until the front LED flashes rapidly.
Ensure the TC has a good direct internet connection. You do not get the firmware first, like most routers.. the TC pulls the firmware down itself.
On Lion use 5.6 utility.. the version in Lion is for toyland. Ignore it completely.
http://support.apple.com/kb/DL1482
5.6 is a tool. A utility.. !!

E71 energy problem after updating firmware

Last Sunday I updated my e71.Since then my battery dies for a day I've tried with other battery and I think the problem isn't in the battery. Please help

Reset the E71. Dial *#7370# 12345 reformat, you'll lose all data. Make a backup first and restore without the settings.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Problem when updating firmware on n93i

i bought a n93i on ebay last month. the phone is from Finland and i am in the US. then i found out they have newer firmware on my phone so i try to update it. in the middle of updating it was disconnected by the pc or the program. then the dialog box said i have to remove the battery and plug in again and then start the phone again. but it still couldnt connect it and now the phone only has the nokia logo in the front display when it is on and nothing on the main display. how can i fix it? do i have to send it back to Finland? the nokia here says they can't do anything about it because the phone is made in Finlad and the model is not supported in the US. please someone help me.

Thats one of main pitfalls of importing phones (and most other electronic goods) from another country, you do not get a warranty. If anything goes wrong then most of the time there is nothing that you can do.
Nokia's that were made in Finland can be found all over the world and the warranty is only valid in the country that it was designed to be sold in, except for Europe where the warranty is valid in all European countries.
Your last hope of fixing it yourself is to read this thread:
/discussions/board/message?board.id=hardware&message.id=4118#M4118

Problem after update firmware 1.2.1

After updated the firmware to 1.2.1, when playing MP3 format songs, the music goes strange and quality turn out very bad. However, when it playing M4A format songs, it runs perfect. Any idea or suggest? Please do not tell me to convert the MP3 file format to M4A.
Thank you very much.

Thanks for clarifying, hopefully someone from BlackBerry will pick this up and it will be fixed in a future release.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Problem with update firmware car kit ck-100

Nokia Car Kit Software Updater write "wizard stop with error" after try of downloads update.

I notice the original post is marked as "Assumed Answered". I read that the original poster can confirm or deny this. If this is not answered (as I assume it's not) can you please mark it as such so that it gets the appropriate priority with Sony Support?
ANNOUNCEMENT: 'Assumed Answered' explained - how us SE Answers members work
Hide Details
Some of you have noticed your threads get marked as 'assumed answered' even though there might not be a solution/answer provided. Keep reading if you want to know why.
Me and my colleagues in the Sony Xperia support team get a list several times a day. This list is called "Email Alert for Unanswered Discussion Questions".
As the name might hint, it contains a list with threads that are unanswered.
All threads that are marked as a question when created ends up in this list if not already answered within 10 hours.
In order for us to get a good overview of the Support Forum we click on 'Assumed Answered' as soon as we have posted a comment, even if it's not really answered. The creator of the thread can then either keep it that way, confirm or deny it.
Either way, we automatically subscribe to all threads we post in, meaning we will get a notification for each new post in every single thread we attend so no post should be missed.
We can also choose to subscribe manually to a thread after marking it as assumed answered (we do this if good answers have been provided by other users already).
by Markus (07-Jun-2012)

Problem with update firmware 1.0.1

Hi,
I just downloaded and installed the firmware 1.0.1 for mac os x tiger and when I boot my MBP, it always gives me a window with " your mbp is now up to date" inscription...
It's not that important but it's annoying... so if someone has an idea to suppress this appearing window...
Thxs a lot ,
Sanka.

You might want to post this in the MacBook Pro forum area in as much as it relates specifically to that unit.
http://discussions.apple.com/category.jspa?categoryID=190

Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)

According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Problem in update firmware

Similar Messages

Maybe you are looking for