Problem in updating applications and downloading podcasts after upgrading to iOS 6

Recently I have downloaded iOS 6.  Since then I cannot download podcasts and cannot update applications

Haha, thanks for the tip! I was just curious if anyone had this problem at all. I just found it odd that before iOS 6, I had version 5.1 (which came standard with my iPad at the time) and there was no delay. You click on/off button for Airplane Mode or WiFi and the function would turn on or off instantly... Just annoying have to wait several seconds for a response. Thanks for the input though.

Similar Messages

  • Problem with home button and "messages" app after upgrade to iOS 4.1

    Hello,
    I have noticed two interesting problems with my iPhone 4. I am not sure if it is in conjunction with the upgrade to the iOS 4.1 software, but I did not notice the problem prior to this. Both of these problems are very odd and are hit or miss. I have tried restoring and the problem is still present. Also, since both problems have presented at the same time, that is why I am starting to believe it is not hardware...
    Problem 1: The home button has become considerably unresponsive. This is not all the time, but it does happen a lot. Sometimes it won't work for about 5-8 clicks and I have to use the power button to access the phone.
    Problem 2: When composing a new text message the cursor would always default into the "To:" section of the app which allows you to easily type what contact you are trying to message. However, I am having the issue now occasionally when I am in the messages app and select to compose a new text message that the cursor now defaults into the chat box (where you type your actual message). This is very annoying and I know that this is not the intended behavior of this.
    Please let me know if anyone has experienced similar issues and can provide me with some feedback.

    I have not experienced the same.
    I have tried restoring and the problem is still present.
    You restored from your iPhone's backup, or as a new iPhone or not from your iPhone's backup?
    If whatever software problem is causing this is included with your iPhone's backup, restoring from the backup will also restore the problem.
    Try restoring as a new iPhone or not from your iPhone's backup to see if this makes any difference. If not, more than likely your iPhone has a hardware problem.

  • Problems with Hotspot, EDGE, and 3G internet after upgraded to iOS 4.3

    I just upgraded my iPhone 3GS to iOS version 4.3 , but after I installed it, the Personal Hotspot badge on Settings>General>Network appears, but it keeps at the "loading circle" sign (the same one when the iPhone is turning off). Besides that I realized that my 3G internet is not working, neither EDGE. none of the 3G or EDGE icons appears next to my carrier bundle, how it usually do. Wifi is working though. I tried to solve the problem restoring the iPhone, but the problem persisted even after the restore. What's happening to my iPhone 3GS?

    Hi man!
    have the same equipment and the same problem, who is your mobile operator?
    I'm from Chile and my operator is Movistar, I think they blocked the service hotspots.
    Best regards

  • App updates not running on ipad2 after upgrade to iOS 5 - anybody know or a solution or have same problem?

    App updates not running on ipad2 after upgrade to iOS 5 - anybody know or a solution or have same problem?

    Operator error! The mute button was on.

  • Can't find my downloaded movies after upgrade ipad2 iOS 5

    After aan easy upgrade to ios5.1.1 I can not find my downloaded movies after upgrade ipad2 iOS 5.

    You are looking in the videos app - correct?
    If they are not in there - try this ....
    Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. If a movie appears in the search - tap on it and it should hopefully start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK and if the rest of your movies have appeared.
    If they still do not show up - sync them back from iTunes on your computer.

  • Unable to send text and play music after upgrading to IOS 6.1

    After upgrading to IOS 6.1, I am having problems sending text messages (sms) to several of the contacts to whom I was able to send text earlier. Also all the songs I have downloaded previously from iStore have all stopped playing. Being a new IPhone convert I am seriously regretting why I got rid of my Blackberry

        I can understand how you are upset, MJ406. I want to make sure that we do everything we can to get the text messages up and running with out any kind of problems.
    When you are trying to send these text messages out are you connected to Wi-Fi or the cell network? If you are connected to wi-fi please do me a favor and turn of the wi-fi, try to send a text to see if it goes out without any kind of issues. Then go into Settings, Application Manager, Slide the screen to the ALL section, Scroll to Messaging and perform a force stop, clear cache, and clear data. Once that is done, power the device off and then turn back on. Once it is back up and running you can turn the wi-fi back on (if you had to turn it off) and retry sending a text message again.
    Please keep us posted.
    Kevin_VZW
    Follow us on Twitter @VZWSupport

  • Silent email and sms notifications after upgrade to iOs 5.1

    After upgrade to iOs 5.1 my iPhone 4S makes no sound when arrives an email or a sms. Is it a bug??

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • My itune crash whenever it download podcast after upgrade to 11.3.1.2, I was it Win 7

    After upgrade to 11.3.1.2, my itune crash whenever I try to download podcast. I am now in Win 7, the itune and those podcasts has been here for a long time. (not newly add)

    I think I have found a "fix" to the problem on Win7.
    My problem was : When I refresh my podcast in Itunes 11.3.1.2 on Windows 7, Itunes crashed.
    I try many different things in order to "fix" the crash, but I think the key thing is renaming or deleting this folder
    C:\Users\<User>\AppData\Roaming\Apple Computer\iTunes
    to something else like
    C:\Users\<User>\AppData\Roaming\Apple Computer\iTunesBak
    From what I observe this affected how Itunes's UI was displayed and not much else, but I would strongly suggest to backup your stuff before doing this.
    Others steps I did thay may have helped address the issue is uninstalling Itunes and reinstalling it. Renaming the Itunes folder in the music folder
    ex: C:\Users\<User>\Music\iTunes to C:\Users\<User>\Music\iTunesBak
    and then copying
    iTunes Library.itl
    iTunes Music Library.xml
    from the "ItunesBak" folder to the "Itunes" folder. NOTE!! All my mp3 files are in a specific folder on my drivem if you are using the default settings don't forget to copy your media library.
    Good luck!

  • [K8N NEO3-F] Problem with USB keyboard and PS2 mouse after upgrading BIOS

    Hello everyone!
    I have upgraded BIOS from 1.1 to 1.4... I have Sempron 2600 (64bit) so BIOS v.1.1 did not recognise it.
    The motherboard works, but after upgrading I have a small problem with my keyboard and mouse.
    When I use USB keyboard my PS2 mouse doesn't work. When I connect PS2 keyboard mouse works!!!
    Can you tell me what's wrong?                   
    Thanks, bartull@           
    PS. Does BIOS v.1.3 recognise Sempron 64bit? Can you give me a link to it?

    I think that the problem may have been caused by flashing either with liveupdate or with winflash.  I had the problem when i used winflash correctly (shutting down all programs, checking all the boxes to clear bootblock and cmos) but had usb keyboard connected during flash.  My suggestion is to reflash with floppy to last bios version that worked using only ps2 mouse and keyboard with the following instructions:
    DOS floppy flash shall be performed with :
    awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
    (Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
    After flash is complete :
    TURN OFF PSU (don't restart) wait 15 seconds
    Turn on again , press the power button .
    Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
    Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
    If that works, then reflash to the bios you tried before with the same procedure.  Once you have stable system with ps2 keyboard and mouse working, re-enter bios and enable usb and keyboard support as a lot of bios' have it disabled by default for some strange reason.
    Good luck.

  • IPhone and iHome Compatibility after upgrading to IOS 5

    I have an iPhone 4 which I recently upgraded to ios 5.  Prior to upgrading I was able to charge the phone on the iHome.  After the upgrade, it doesn't work.  I tried re-setting the phone, the iHome - at first this worked and let it charge.  Now it doesn't charge - still plays music fine.  The phone does charge with the adapter in the wall as well as an adapter for the car which charges and plays music over the airwaves.
    I upgraded my phone first and had the above.  My wife has the same iPhone 4 - same thing - charged and played music fine prior to upgrading.  Now it doesn't charge but plays music fine.
    So, what's the deal?  Any suggestions or is this a result of a problem with the upgrade softwar which needs to be fixed?
    Thanks

    My WiFi connection works fine, but 4G from ATT gives in 0.15 mpbs download. I called up ATT several times, but they have no resolution to this problem. Everytime they ask me to reset my network connection. This is a big deal for me as I am most of the time on Cellular Data and I need to use iPhone for my work. I am thinking to roll back to iOS 5.0.1. What in this world could turn a 3G phone into a 4G phone just by a software upgrade? I just feel like I am down to a 1G phone. Apple please fix this asap and release a patch, else I may not be able to use this phone.

  • How to download apps after upgrading to ios 6

    I can't get my iPad 2 to download apps after I upgraded to ios 6. Every time I try it says that I have to make my account more secure send therefore make 3 questions and answers. I do that, but when I am ready to press done it says my session has run out and I have to start all over:0(
    Can anybody pls help??

    The screen is black? No apps whatsoever?

  • Unable to update application and download new purchase?

    After downloading ios8, I am unable to update or download any application. Please help!

    Is the time and date correct?  Make sure that includes the time zone.

  • Problems with iTunes and Podcasts after upgrade to iOS 8.1.3.

    I upgraded my iPhone 5 to iOS 8.1.3, then I purchased some music on iTunes.
    While hearing the music, incomming call shut the Music player down. From that time on, cannot open neither Music, nor iTunes Store, Podcasts, Settings/General/About, (Nike) Running, ...
    Does not solve the issue: Restart iphone, restore from the back-up 
    Advice appreciated

    Hello, ik31.  
    Thank you for visiting Apple Support Communities.  
    Here is an article that I would recommend going through when experiencing this issue.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • Problems with downloading movies after upgrade to iOS 7

    I can't download the movie via WiFi to my iPad3. WiFi broad band 20 Mbps
    iOS 7.1.1, free memory 9.6 GB. Downloading keeps failing after reaching 3-4 GB loaded. Sometimes displaying an error "the item can't be downloaded this time". It has never be a case with iOS 6. Very frustrating.

    Same problem for me after the update. No matter what movie I try to download, it stalls halfway.  Interestingly, could be a wider iTunes issue as I ended up with the same problem trying to download movies to my MacBook Air.

  • Problems with conference calls(adding and merging calls) after upgrade to ios 8.1.2 on iphone 5s

    I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
    Some of the scenarios that I have experienced is:
    1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
    2. Sometimes the second number gets dialed, cannot merge the calls.
    3. After talking to the second person, cannot go back to the first call.
    I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
    Anyone experienced this before? Any suggestions?

    Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
    iPhone 6; iOS 8.1.3; Carrier: Verizon

Maybe you are looking for

  • Should I use one apple id with multiple devices?

    I have 2 iPods an iPad and a new iPhone. Should I use the same Apple ID on all decvices?  The iPods are for the kids to use. Also, will be adding apple tv soon...

  • How do i make this page adapt to all screen sizes???

    if i copy and paste my index code can someone please tell me if theres anything i can add so it will adapt to all screen sizes?? <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

  • [solved] (how) can I use my laptop as a router for other computers?

    First of all, I have to admit that I do not know too much about networking. Just enough to make the simple things work properly. I have a laptop, which accesses the internet by wireless lan. The router is in my downstairs office. So far so, good, I h

  • Cannot ssh using jsp

    Hi I have a jsp page which contains the shell script for running an instance and then doing ssh to the remote host server .When the jsp page is loaded the instance is run but ssh cannot be done .The ssh to instance takes time (20 to 25 sec ) ,so i tr

  • Weblogic Timer Event Generator - How it works?

    Hello everyone! I have wrote simple wli-application, that subscribes to the message broker channel. I have deployed it to the cluster (managed servers 1 (ms1) and 2(ms2)). (I use Weblogic Server 10.3, cluster contains 1 admin server and 2 managed ser