Problem in Updating iOS 5.1 onto iPad 2.

Error message failure to download iOS 5.1 appear when I try to download iOS 5.1 onto my Ipad2. I have tried through the air and iTunes but none of them works. I have not jail broken my iPad 2. Is this problem related to my device or with the server? Pls assist.

Try waiting, a lot of people are also interested in updating to iOS 5.1 so it's probably server related.
Hope I helped,
Simmm

Similar Messages

  • There was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

    there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Hello, i have problem to update my apps on my ipad

    Hello, i have problem to update my apps on my ipad when i bought it was registered with email of seller which is lost later and ehrn i created my own apple id i cannot update my apps with it because it keeps asking me infos seller email please help me to  update my apps ...regards
    <Email Edited By Host>

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
    What id shows at the bottom of the Featured tab in the App Store app ? You could try tapping on it and then log back in and then see what id shows for the updates.
    But any apps that were downloaded by the previous owner will be tied to their account, and only their account will be able to download updates to those apps - you will need to delete and buy and download them with your own account to be able to download future updates to them.

  • HT201412 I try to update IOS 6 to my ipad 2 and after half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can every

    I try to update IOS 6 to my ipad 2/ wf/3g  and after about half of the procedure stopped ... then I try to reconnected to the itunes and say "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". Can everyone help please. In the screen of iPad appears the itunes Logo and the cable of connectios. Can't do nothing!!!

    Click restore in itunes.

  • My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...

    Hey there Abdulrahim0259,
    I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    And:
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • After downloading the latest update IOS.8, for my IPad the Backup

    After downloading the latest update, IOS.8 , for my IPad the Backup  and Storage option under settings is no longer there

    The iCloud backup option has moved - it's now Settings > iCloud > Backup (it's towards the bottom of the list of items to back e.g. photos, mail, contacts, calendars ...  Backup, Keychain, Find My iPad).
    The storage option is Settings > iCloud > Storage (above the list of items to back up)

  • After downloading the new update ios 6 for the iPad , I can not find the YouTube app

    After downloading the new update ios 6 for the iPad , I can not find the YouTube app. Is there a way to get the YouTube app back?

    It's now not part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
     Cheers, Tom

  • Recently installed updated IOS on iphone and ipad, but since then I no neither appears in iTunes; keep reading other support responses about the "devices" button, but I do not see it; running 11.1.5.5

    Recently installed updated IOS on iphone and ipad, but since then I no neither appears in iTunes; keep reading other support responses about the "devices" button, but I do not see it; running 11.1.5.5

    Hi Gray Don,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Follow the steps in order, but step 5 resolves the issue in most situations.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    - Judy

  • Solved ( Ipad charging problem after update IOS 7.0.4 )

    Its already verified by me ( Technician ) problem solved.
    We were working on my customers ipad for 2-3 weeks finally figured out whats the problem.
    We replaced new battery, cable and charger did not work. Reseting your ipad also does not work.
    Since we fixed customers Ipad. We tried the small charger, 10w charger and connecting to computer it works. Fully charge.
    Its easy fixed. Here what you can do. You need to do fresh factory restore. Do not use restore / update
    1. If your ipad is dead, slow charging. Find a way to have it charge get it at least 5-10 % charge so that your computer will detect it on Itune.
    2. Open Itune, check if your detect it, you see it on top right coner.
    3. If you have FIND MY IPAD app you have to turn it off otherwise it wont allow you. To turn it off go to PRIVACY then you will see LOCATION services turn it on
        You also see FIND MY IPAD if its on turn it off it will ask your Apple ID and password. If its off already your ready to go. NOTE: Ipad has to be connected
        on  WIFI or 3G
    4. Go back to Itune. On the top right corner you will see your IPAD NAME click that, you see another box ( restore / update and restores ipad ) select restore
       Ipad ( Factory restore with new IOS 7.0.4 ) let it finish the restore and your done. It will now Fixed your problem. It should charge using your original charge
      or connecting to your computer.
    NOTE: If you want to upgarde your IOS to 7.0.4 dont do the update you might have problem. You do fresh Factory restore it install new IOS 7.0.4 no problem.
              If you have data that you need to have to back it up this restore will earese all information on your ipad.
    Good Luck, let me know if this help you and dont forget to share it.

    The weird iTunes icon.... Does it also show the USB cord on the screen? If it does, that means that you have to restore your iPad using iTunes on your computer. Something went wrong and you have to fix it by restoring the iOS software.
    iTunes: Restoring iOS software - Support - Apple

  • Problem after update IOS 7

    After update IOS 7, problems with:
    Swipe to answear, take photo, message delay.
    Also cannot connect Wifi
    anyone can help!!!!

    In that case there are an awful lot of hardware problems happening at the same time.!!!,!
    Neither my ipad not iphone will detect any other bluetooth device since the upgrade to iOs 7 - not even each other.
    When are Apple going to make bluetooth work? How come they have never managed to implement fully and properly something others have had working for years?
    See all the other postings about various Bluetooth failures sine the upgrade.
    I've tried deleting all known devices and starting again, but even that does not work

  • HT5934 How do I update IOS 7 to my ipad 2

    My ipad2 doesnt have the updated network feature, how do I update to IOS 7

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • I updated ios 7 for my ipad .its asking for passcode.how toget it

    i updated my ipad software ios 7.its now disabled and asking for passcode.how to get passcode

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to update ios on first generation iPad

    how can I create a icloud to hold my backup info before attempting to update ios?

    iCloud backups are only available on a deivce when you have iOS 5+ installed on it, as it's on iOS 4 then you can only backup to a computer's iTunes, which you can do by connecting it and doing File > Devices > Back Up on your compter's iTunes.
    As well as forcing a backup, before starting the update you should copy any purchases off the iPad to your computer's iTunes library via File > Devices > Transfer Purchases (iTunes downloads aren't included in the actual backup, just the apps content/settings). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case.
    Then start the update by selecting the iPad on the left-hand sidebar of your computer's iTunes (you can enable the sidebar via option-command-S on a Mac, control-S on a PC), and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • Problema al descargar IOS 6 en mi iPad tercera generacion

    Hola, soy nuevo en el soporte de Apple.
    Estuve intentando 3 veces descargar IOS 6 en mi iPad 3th generacion; cuando lo intento descargar (a los pocos minutos) me da error y me dice que no se ha podido descargar.
    Soy de Argentina. Si tienen alguna recomendacion la aceptaré con gusto.

    iOS 6 hasn't been released yet - I'm not aware of Apple having specified a time, but people have suggested that it'll be available in just over 1.5 hours.

  • How do I take screen shots with the new update iOS 5 on my iPad and iPhone?

    When I try to take screen shots on both my iPad and iPhone they both come up with the screen to shut down the devices. I've updated both with iOS 5. Any clues on how to take a screen shot with iOS 5?

    As with the previous iOS versions.
    Press and hold the Home button and use the on/off or sleep/wake button as a camera shutter button for the screen shot.
    Or while pressing and holding the on/off or sleep/wake button before the slide to power of appears, use the Home button as a camera shutter button - this must be done before the slide to power off appears.

Maybe you are looking for

  • Hp pavillion dv9700 won't start with Ac adapter plugged in

    Dear all, I have a 3 year old hp pavillion dv9700. The problem is that the computer won't turn on when i remove the batteries and leave the Ac adapter plugged in. The led that indicates that the adapter is plugged in is on, so that means that the ada

  • Runtime Error In copy Of SAP Standard Program

    How do people, I have copied a SAP standard program H99CWTR0 because I need to add an extra column output in the report. I have made a few chnages regarding the INCLUDES When I run the program I am getting the following runtime error: " The structure

  • Define default for excel integration to report painter

    Hello, I am running report painter. I am using office integration to display the report with Microsoft Excel. The Excel opens with left to right display. I want to display him right to left - but I cannot define right to left as a default. Where can

  • Tomcat Server Problem

    Hi everyone, just wondering if anyone can help me with this error I get when starting my tomcat server. Is it that something is already using the 8080 port and if so how can I stop it. Thanking you in advance 25-Nov-2005 21:13:21 org.apache.coyote.ht

  • Can I have Group1 totals broken down by group3 database field?

    I get requests to create reports with the following type format, and with more group levels each needing totals broken down.  I have been able to create these reports using arrays and doing it all myself without features of Crystal reports.  Is there