PROBLEM IN UPDATING REGISTER RG1 & RG23(PART-1) IN T-CODE- J1I5

DEAR CONS
while we are using T-CODE- J1I5 , movement type-601 for the finished product the system is not allowing to update the register.

Check you movement type settings in SPRO for movement type 601 mantain the registers you want to update in trax J1I5
Log Gen>>Tax On goods Mov>>India>>Buss Trasac>>Incoming Excise Invoice>>
Specify Which Movement Types Involve Excise Invoices
Use
In this IMG activity, you specify which movement types relating to goo
receipts involve excise invoices.
The system uses this information during the goods receipt procedure.
When you post a goods receipt using one of the moevement types that yo
have specified here, the system prompts you to enter the excise invoic
number.
Note
This option cannot be used for processing goods receipts without
purchase orders.
Regards
Sujoy

Similar Messages

RG23 Part II not updating for Vendor Return

All SAP Gurus,
In case of Vendor Return..
RG 23 Part I is getting updated.
But RG23 Part II is not getting updated.
Where may be the problem?
Regards,

dear sir.
when u do vendor return ,
1) part1 will get updated in RG23 part1.
2) RG23 part II will not update until you utilized in J2IUN, after utilization then only it will update to RG23 part II
in j2iun we can utilized with respective u r vendor return excise invoice number.
or
if u r series group ( Immediate Utilization of CENVAT indicator active), while creating excise invoice in j1is , it will update the part II
regards
jrp

Problem in Print Out of Excise register RG1

Dear all,
We have a business scenario as follows:
1.Production Order Confirmation-101, 261 for receipt
2. Scrap Receipt-262.
For Scrap Sales:
The entry in RG1 should be Scrap receipt (262) and then despatch of scrap i.e issue(601).
During updation we do the following:
We receive scrap in RG1 register through RMA classification. Then we issue the scrap in RG1 register through IDH Classification. The register also get updated and extracted successfully.
Problem: While printing of RG1 register there is no entry for Receipt (262) and issue(601) of scrap.
Regards,

Can anyone pls suggest how to capture Scrap sale in RG1.

Updation of RG1 register for make-to-stock material

Dear Experts,
Will you please guide me how to update the RG1 register in case of sales for make-to-stock materials?
With regards,
Jhelum Roy

Read SAP help documentation [Update of Registers RG 1 and RG 23 (Part I)|http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm]

To Update the RG1 and RG23 Registers.

Hi Frnds,
Currently in our RG1 , RG23 registers are getting updated on transaction basis , now after doing to the physcial checking of the stock i had found some discripencines in the stock , now i am going to update the stock using physical inventory option ( 701 Mvt type ) , then i want my RG1 and RG 23 register also to get updated , how to do this ?? What are the Tcodes to update the same ??
Regards
rakesh

HI,
Check in customizing, if you have defined relevant movement types for update of the registers.
Logistics - General > Tax on Goods Movements > India >Business Transactions> Incoming Excise Invoices > Specify Which Movement Types Involve Excise Invoices >
Regards,
Deepak Gupta

Updating the RG1 register.

Hi..Gurus,
Iam updating the RG1 register like this. In my company we create sales order. After that the PP people do the Sales order to process order and put the stock into the unrestricted stock.
Then we do delivery and billing and excise invoice.
After creation of the excise invoice iam using the J1ID here in the Chapter Id and Material combination iam putting the material as RG1.after that iam using the T.code SE16 and in the table j_2irg1bal iam maintaing the some quantity in total receipts+issues field.
After that iam doing RG1 updation ,Extraction.
My question is is my process is correct or not? if we follow the process any problems come in the future.
Gurus please correct me.
regards,
jyothi.

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

Maintain/update in RG1 register

Dear Guru,
If the finished good return from customer to business then,how to maintain/update in RG1 register.
Regards,
Kumar

Hi Kumar,
The RG1 Register is the daily stock account register of finished goods and if the finished goods return from customer to business then that finished good is considered as input material and RG23A or RG23 C register will get update.
As i case of return from customer we have to do PGR(post goods receipt) with movement type 655 and J1IH manual excise adjustment.
Regards
Gaurav M

CIN: Items are not displayed while updating the RG1 Register using T Code:

Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
Chandra

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

Updation of RG1 register

Hi,
Once again I am putting this question.
When I am trying to update the RG1 register with t.code J1I5,At the time of simulation,I am not able to simulate the some material document (getting the red tab against them).So that I am not able to update the RG1 register.
What can be the possible resons that some document not simulating.
I have maintained the J1iD after Creation of excise invoice.
Urgent

hi,
this is because there is not enuf bal against the material, try by posintg some inward goods movement thru a PO or a manual JV in j1ih. then ur issue will be resolved.
saurabh

TS1702 problem with updated find my iPhone app: when I attempt to open the FMi app, it tells me that I need to be a registered developer and run iOS7 to do so; is anyone else having this problem? I got the app as a regular update to my existing FMi app w

problem with updated find my iPhone (FMi) app: when I attempt to open the FMi app, it tells me that I need to be a registered developer and run iOS7 to do so; is anyone else having this problem? I got the app as a regular update to my existing FMi app which worked great.

The problem is being reported in the news media, yes. Apparently someone at Apple jumped the gun and uploaded the update before it was ready. They'll probably issue another update shortly, I would expect, but you can go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. If you have a backup copy of the older version of the app, remove the newer version, restore the old version to iTunes on your computer, and resync.
Update: Well, that was certainly quick. As of a short time ago, various sites are reporting that the Find My iPhone app is no longer displaying the previous error message. If it still is for you, delete it from your iPhone and re-download from the iTunes Store.
Regards.

Hi, i was recently on an IOS 7 update before it's release and downloaded it from the web and i just got this message saying that my device is not registered as a part of the iphone developer. i have been using this for about 2 months now. what is a fix?

hi, i was recently on an IOS 7 update before it's release and downloaded it from the web and i just got this message saying that my device is not registered as a part of the iphone developer. i have been using this for about 2 months now. what is a fix?

Were you running iOS 7 beta? If so, as a developer you need to log into the Developer forum for assistance.
Not a developer and running iOS 7 beta? <edited by host>

Connection problems after updating to iOS 5

Hello everyone,
I updated my iPhone 4 (bought it in June '10) to iOS5 a week ago like everyone else. Ever since then, I've been experiencing problems with pretty much anything that requires a data connection. It won't send messages, log in to Facebook or other communities or find any websites. I have to switch the phone off and back on and then it'll work for a while. Usually, the problem starts after I haven't the phone for 15 minutes or more. It just happened and when I checked the connections, I had full connection (five bars + 3G) to my phone provider and full connection to my wifi as well. Still, iMessage said my messages couldn't be sent, it didn't download new emails and Whatsapp Messenger wouldn't even connect. So far, I haven't experienced any problems with the phone connection, can make calls and haven't been told I couldn't be reached, so I think it's safe to assume the phone connection isn't part of the problem.
There weren't any problems while updating the phone and I haven't dropped it or anything since then. The only thing I noticed was that when setting it to auto-sync via iCloud, it slowed down my internet, so I switched that feature back off. Do you think this has caused the problem? Any suggestions to what I should do?

How long does the "waiting" message stay there? Does it eventually go away and the app loads or does it stay that way permanently?
The app store is temporarily being overwhelmed by purchasers of the new iPad trying to get apps onto their devices. This might be a reason for a long wait. But eventually you should be able to get the app if the extra use is causing the problem.
Did you try a reboot of your iPad? Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
You might also have something else waiting to download that is causing the problem. Something like a podcast. Check all apps that download regularly to see if this is the case and delete those or terminate their download.
Have you deleted those apps that are waiting? Do that and then retry them on at a time.
Hope this helps.

Hello, i have problem to update my apps on my ipad

Hello, i have problem to update my apps on my ipad when i bought it was registered with email of seller which is lost later and ehrn i created my own apple id i cannot update my apps with it because it keeps asking me infos seller email please help me to update my apps ...regards
<Email Edited By Host>

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
What id shows at the bottom of the Featured tab in the App Store app ? You could try tapping on it and then log back in and then see what id shows for the updates.
But any apps that were downloaded by the previous owner will be tied to their account, and only their account will be able to download updates to those apps - you will need to delete and buy and download them with your own account to be able to download future updates to them.

Problem whit Update Operation, Error UPDATE_ROW_CONFLICT with Oracle DB

Hello friends!, I have a problem whit UPDATE Operation with a Oracle DataBase, but it is rare because it works in "Java Sun Application Server" and not in Tomcat (5.5.12) , displaying the following error:
"Error :Number of conflicts while synchronizing: 1 SyncResolver.UPDATE_ROW_CONFLICT row 5 values changed in database"
part of the file log:
"SEVERE: Error Description
java.lang.RuntimeException: Number of conflicts while synchronizing: 1 SyncResolver.UPDATE_ROW_CONFLICT row 5 values changed in database
at com.sun.data.provider.impl.CachedRowSetDataProvider.commitChanges(CachedRowSetDataProvider.java:878)
at ido02004.EditPerson.saveButton_action(EditPerson.java:519)
For any change of columns for table in Data Base.
The code used in the page (EditPerson.jsp) is:
public void init() {
Object pid = getSessionBean1().getCurrentPersonId();
RowKey personRowKey = ido_personsDataProvider.findFirst("PERSON_ID", pid);
ido_personsDataProvider.setCursorRow(personRowKey);
public String saveButton_action() {
try {
ido_personsDataProvider.setValue("USER_ID", userDD.getSelected());
ido_personsDataProvider.setValue("STATUS", statusDD.getSelected());
ido_personsDataProvider.setValue("NAME", name.getValue());
ido_personsDataProvider.setValue("FUNCTION", function.getValue());
ido_personsDataProvider.setValue("ADDRESS", address.getValue());
ido_personsDataProvider.setValue("EMAIL", email.getValue());
ido_personsDataProvider.setValue("PHONE", phone.getValue());
ido_personsDataProvider.setValue("VALUATION", valuation.getValue());
ido_personsDataProvider.commitChanges();
catch (Exception ex) {
log("Error Description", ex);
error("Error :"+ex.getMessage());
return null;
Please, Some idea of why gives the error? Help!
Thanks in advance!
Ren�
P.D. Excuse my English.

Hi All!
New Info:
System.out.println(" date created : "+ido_personsDataProvider.getValue("DATE_CREATED"));
System.out.println(ido_personsDataProvider.getCachedRowSet().getMetaData().getColumnClassName(13));When these lines are printed in Java Sun Application Server for JSC show this:
[#|2006-05-05T17:12:50.264-0500|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.stream.out|_ThreadID=15;|
date created : 2006-04-24 00:00:00.0|#]
[#|2006-05-05T17:12:50.264-0500|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.stream.out|_ThreadID=15;|
java.sql.Timestamp|#]
When these lines are printed in Tomcat show this:
date created : 2006-04-24
java.sql.Timestamp
Why? the values of this date is different in one or another server. Problem of driver JDBC? I use driver: to ojdbc14.jar, in Tomcat for the connection to the BD Oracle. Maybe this originates error UPDATE_ROW_CONFLICT...
Please, any idea?
Thanks!

Facing problem while updating IInfotype 0009-bank details through workflow

Dear SAP Gurus,
I am facing a problem while updating Infotype 0009 through workflow which is integrdated with portal.
Scenario:
Employee logins to portal and changes his/her bank details like payee name, bank key, account number, postal code and city of bank, bank name etc.
Once he submits the request, my workflow is triggered through SAP_WAPI_START_WORKFLOW which is called from portal and goes through various approval steps and finally reaches the step where the container elements are finally to be updated in IT0009.
Field bank account number (BANKN), which is part of table PA0009 are easily updates using the FM HR_INFOTYPE_OPERATION by first enqueuing the employee number and after the update dequeuing it.
However fields like payee name (EMFTX) bank key (BANKL) , bank name(BANKA -structure BNKA_BF-this is automatically fetched based on bank key) and postal code(BKPLZ) and city of bank (BKORT) are from structure Q0009 (on the infotype 9 screen level) and from table BNKA (at table level). The problem is that these are not getting updated by HR_INFOTYPE_OPERATION as they are not the part of infotype 9.
Can anyone help me to understand how can these fields be updated ?
Quick help will be highly appreciated.

Hi Spantaleoni,
Thanks for your quick response.
Well actually the table BNKA is a master table for the bank information and we must not create entries in it or update the table programatically, rather we should use the available data in it.
Now say employee currently has bank as A and he wants to change it as B which is available in BNKA then he will just select the bank B from search help provided in portal which again comes from table BNKA only. Employee then submits the info and it must get updated in the infotype PA0009.
As far as think, this should be done on screen level of infotype PA0009 as I have already mentioned that certain fields are coming from structure Q0009 and they cannot be updated on PA0009 table level.
I am just looking for way through which I can update the screen of infotype PA0009 of employee through workflow.
Regards

PROBLEM IN UPDATING REGISTER RG1 & RG23(PART-1) IN T-CODE- J1I5

Similar Messages

Maybe you are looking for