Problem in upgrading TYPE X... Please suggest
Hi,
I want to upgrade the below code.
line(256) TYPE x.
Please suggest in this, how to handle this hexadecimal type of length 256.
Thanks,
Ravi
Ravi,
Use the Class CL_ABAP_CONV_OUT_CE, Method UCCP.
This returns a hex value.
Hope this would be of help.
Similar Messages
-
Had this router running for acouple weeks. Its had that **bleep** connection problem but just today it got even worse. About every 30 seconds it will lose connection to the modem and internet for about 2 seconds. So even if i try to upgrade my firmware down to 008 i dont get the chance. The upgrade gets about 50% done and then i lose internet and it fails. **bleep**?! please please please help
Solved!
Go to Solution.If you have downloaded the firmware already then disconnect your modem from the router, and just connect a computer straight to the router on any one of the LAN Port's...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router... -
Anyone with eye strain problem after upgrading to Yosemite please report feedback to Apple
As this eye strain problem is getting worse and basically I love some new Yosemite features, so please let Apple knows if this new upgrade have some display problems. I am using iMac 27" late 2013. this eye strain problem doesn't occur when using Mavericks (my mac is dual boot Maverick <-> Yosemite)
https://www.apple.com/feedback/
Thanks in advance.Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept it and the other iLife/iWork applications into your Apple ID, do so.
2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
3. Click here, contact Apple, and wait for a response.
4. Buy them.
(116660) -
Email problems since upgrading to ios6 - please help!
My iPad email won't connect since upgrading to iOS 6, saying I should check the settings.
This is just the iPad based email - it works fine via safari.
Any ideas gratefully received...
ThanksHave just read some other threads, and it suggested deleting then reinstalling my gmail account, which worked.
Thanks! -
Problem with file types. Please help
I recently downloaded the entire Sun Java Tutorial and have started to go through it. At the end of the first main trail about inro to OO Programming, there is a question/answer portion. There are a couple of excercies where you are to go through the ClickMe app and change some things around. When you click the 'click me' hyperlink, it would open the source in a new Internet Explorer window. That didn't work well for me as I can't very well edit anything in an Explorer window. So, I decided to change and do an 'open with' and used NotePad. Well, it didn't open it in a very readable format... so I thought 'forget it' I want to get it back to the IE format where I can at least read it easily. So, I've started to dig around and now I can no longer do an 'open with' and if you go into the View, Options, File Types 'JAVA' isn't listed anywhere in there.... BUT if I try to add a new type it says'java_auto_file' is associated with another program. So, then I got into REGEDIT and tried to modify the 'java_auto_file' key to use InterNet Explorer... but now I can't get the thing to even open in IE. HELP? If anyone can do this and see what I'm talking about can you figure out how to get me back to how it was when I pulled off the Tutorial....I'm lost. Thanks
Try Netscape -- it lets you see the source files .java when you click on the link.
Messing with Window's Registry is risky business. Try to find the old working copy and restore/rename it. -
Shutting down/Restart problem (as I type this) - please help
Info: I have an external firewire HD attached. I inserted a Compact Flash card (photos on it). The Lexar card reader is new and worked fine yesterday. I double clicked it to get to the photos and I think this is where the candy colored swirling circle started it's swirling (like an hour glass in Windows I suppose).
Well when it started the swirling, I just thought, it's taking time to access the large (only about 5) digital photos on the card. So I went about my business and did a lot of things on my computer (as I'm still typing now).
The problem: I instructed OS X to restart and the swirling indicator continues and the cpu won't go into restart. At this point, I can not even select shut down. If I minimize this window and scroll my mouse over the desktop I get the swirling indicator still.
I don't know how to force the computer to quit what it is doing. I pulled the CF card out after many minutes of the swirling (didn't help).
Should I resort to manually pushing the button on my monitor or Cube to force it to shutdown (if it will) or is there a safer way to proceed.I disconnected the card reader from the 4 port USB hub.
The computer immediately went into restart (which I had selected 10 minutes ago).
So there's a problem with the hub I suspect. In even OS 9 this particular USB hub gave me fits. So I may just need to replace it.
By the way, on restart, I got a message on my screen that the USB device had low power and it was recommended that I connect it to a power supply on the wall. I checked, and it is connected to the power supply on the wall. Perhaps the power supply has gone bad and isn't giving any power to the hub. However, there is a red light that comes on, ontop the hub, when I connect the power to it (red light goes away when I pull the power from it). And get this, when I disconnect the power, the red light goes away and a green light comes on (probably getting power from the computer). Should I suspect that when the power supply is connected that the red light is actually an indicator that the hub is not getting power considering all this? And when the power plug is disconnected the hub defaults to getting its power from the the computer?
Anyways, what's a good reliable USB hub to purchase? -
Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card
Unfortunately, you cannot upgrade the processor or graphics card on this laptop.
Here is a page from CPU-World that gives the specs for your processor:
http://www.cpu-world.com/CPUs/Bobcat/AMD-E%20Series%20E2-1800.html
You will see down near the bottom of the page that it is not upgradeable. Some laptops come with the processor soldered to the motherboard. Almost all laptop graphics are this way. The only way that you would be able to get a faster processor/better graphics for this laptop would be to purchase a brand new motherboard. You can do an Ebay search for 'HP G6 motherboard' to see what average prices are if you want to go this route. -
Please suggest problem in increasing height repeating frames
Hi,
in my report normally up to 100 are printed. i setted the vertical elasticity as expand and horizontal as fixed.
but while priting, in vertical, it is contracting if date is too short enough and expanding when dat is large enough. But what my requirement i want to specify the height of each field in repeating frame fixed. i.e. 3 centimeters and it should be same for all records printed on page and on each logical page and i want to print maximum 8 records per page becoz my print page size can hold maximum 8 records and each record at 4 lines. And even if the data is short enough it must not be contracted, if data is one line,and the remaining space that is in 3 cemtimers should be left blank and it must to go to second record. That is in fixed heigt of record repeart frame i want to print the data. If data goes more than 3 centimetres then date must be truncated. I did not find any height to set this property in Repeating frame property.
please suggest solution'
thanks in advance
prasanth a.sHi Prasanth,
Enlarge the Repeating Frame height to say, 3 centimeters in the layout.
Set the Vertical (& Horizontal as well) Elasticity of the repeating Frame as Fixed.
In the Property Palette of Repeating Frame, set Maximum Records Per Page to 8 and Set Page Break after property to Yes.
This will solve ur problems.
Have a nice day...
Raja Angamuthu B -
i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?
I have the same problem. After updating to 6.1.2 my iPad 3,2 will not find Verizon network. It just says "Searching..." for ever. Any thoughts?
-
My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?
It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.
-
Dear Ms Apple....My wi fi shows Not configured..please suggest me a solve out this problem soon..
Ms Apple is away from the desk but maybe I can help. If you open system preferences you'll see icons. Click on the one that says "Network". You should see somthing like this
Make sure that Wifi is turned on (gree light). This is a box in the upper right that says "Turn Wifi On". Click that box. Now your radio is on. To connect to a wifi network, select the icon in the upper menu bar that I've circled.
You can chose a network to join from the listed networks. You can also turn on wifi from that top line menu button but I think everyone be familar with system preferences. You'll go there a lot in your mac life. -
I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.
haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.
-
Has anyone had problems with upgrading iPhoto? I am, it stops at 5 of 9 and just stays there and won't finsih. Can someone please help me out?
iphoto upgrading: Apple Support Communities
iphoto upgrade hangs: Apple Support Communities -
Type X problem in upgradation from 4.6c to ECC6.0.
DATA: BEGIN OF tfile OCCURS 0,
rec(2500) TYPE c,
END OF tfile.
DATA: BEGIN OF trans OCCURS 0,
x TYPE x VALUE '00',
c_00 TYPE c VALUE ' ',
soh TYPE x VALUE '01',
c_01 TYPE c VALUE ' ',
stx TYPE x VALUE '02',
c_02 TYPE c VALUE ' ',
etx TYPE x VALUE '03',
c_03 TYPE c VALUE ' ',
eot TYPE x VALUE '04',
c_04 TYPE c VALUE ' ',
enq TYPE x VALUE '05',
c_05 TYPE c VALUE ' ',
ack TYPE x VALUE '06',
c_06 TYPE c VALUE ' ',
bel TYPE x VALUE '07',
c_07 TYPE c VALUE ' ',
bs TYPE x VALUE '08',
c_08 TYPE c VALUE ' ',
ht TYPE x VALUE '09',
c_09 TYPE c VALUE ' ',
lf TYPE x VALUE '0A',
c_0a TYPE c VALUE ' ',
vt TYPE x VALUE '0B',
c_0b TYPE c VALUE ' ',
ff TYPE x VALUE '0C',
c_0c TYPE c VALUE ' ',
cr TYPE x VALUE '0D',
c_0d TYPE c VALUE ' ',
so TYPE x VALUE '0E',
c_0e TYPE c VALUE ' ',
si TYPE x VALUE '0F',
c_0f TYPE c VALUE ' ',
dle TYPE x VALUE '10',
c_10 TYPE c VALUE ' ',
dc1 TYPE x VALUE '11',
c_11 TYPE c VALUE ' ',
dc2 TYPE x VALUE '12',
c_12 TYPE c VALUE ' ',
dc3 TYPE x VALUE '13',
c_13 TYPE c VALUE ' ',
dc4 TYPE x VALUE '14',
c_14 TYPE c VALUE ' ',
nak TYPE x VALUE '15',
c_15 TYPE c VALUE ' ',
syn TYPE x VALUE '16',
c_16 TYPE c VALUE ' ',
etb TYPE x VALUE '17',
c_17 TYPE c VALUE ' ',
can TYPE x VALUE '18',
c_18 TYPE c VALUE ' ',
em TYPE x VALUE '19',
c_19 TYPE c VALUE ' ',
sub TYPE x VALUE '1A',
c_1a TYPE c VALUE ' ',
esc TYPE x VALUE '1B',
c_1b TYPE c VALUE ' ',
fs TYPE x VALUE '1C',
c_1c TYPE c VALUE ' ',
gs TYPE x VALUE '1D',
c_1d TYPE c VALUE ' ',
rs TYPE x VALUE '1E',
c_1e TYPE c VALUE ' ',
us TYPE x VALUE '1F',
c_1f TYPE c VALUE ' ',
END OF trans.
the syntax error coming in below statement.
TRANSLATE tfile USING trans.
when iam checking structure trans variables declared with type x in ECC6.0 its giving error.
message'trans must be character type'
Please suggest me replacement of hexadecimal values in ECC6.0.Hi,
DATA:
conv TYPE REF TO CL_ABAP_CONV_IN_CE.
conv = CL_ABAP_CONV_IN_CE=>CREATE( input = Xcontent ).
conv->READ( importing data = content len = len ).
Check this link:
Re: creating a XML document for a posting via HTTP
https://www.sdn.sap.com/irj/sdn/profile?editmode=true&userid=3767537
Regards
Adil -
Please suggest where I have to maintain activity type in employee master
Hi,
Goodevening to you.
Can I maintain Activity Type to an Employee.
My client is having Time Sheet entries through CATS and would like to have actual hours booked against projects as well as activity type. Each activity type will have a different rate. Please suggest where I have to maintain activity type in employee master.
Regards,
RahulHi,
I have got the answer. We can maintain activity type in 315 info type.
Regards,
Rahul
Maybe you are looking for
-
I just got a new iPod Touch 4th generation for my daughter. I have a iPhone 5 that is already set up on iTunes. The only thing I want on her iPod from my iTunes is music and apps. How do I set her iPod up so that it only gets that information? Do I s
-
Connect fios cable to pc.
How do i connect fios cable to my pc and use the signal with Windows Media center. I have connected the fios cable directly to the back of my pc. (RF in) When I try to set up tv in Windows Media center it cannot find the tv signal. Is there another p
-
How do I add a site to the exception list using Mac book Air OS Lion 10.7.4
Any advice please?
-
Error 1073807302 while connecting a third party USB device,and showing invalid setup
While connecting a third party USB device,In NI MAX it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,in the USB settings Tab it is showing no pipe present in Bulk
-
On my macbook air, Facebook/Safari there is an invalid login in the auto fill. When i delete via safari/preferences/passwords it disappears but after a while it re appears. Valid accounts can be deleted successfully but the invalid one just keeps com