Problem in Upload for HR Cube

Hello,
I am facing one problem when i am uploading data in HR Cube Qualification (0PAPD_C01).
When i am uploading from R3 to BW it is giving 0 records. Also it is giving green signal.
But in my R3 extractor, 7,350 records is available.
Same connection, i did data upload for FI and Sales.
Everything is working fine.
Even in HR, the other functionalities like
Headcount and Personnel Actions and
Applications and Applicant Actions
are working fine. Only Qualification is giving problem.
I have replicated and activated properly for Qualification info source.
Monitor Details:
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Can any one give your help? Any special settings i have to do for Qualificaiton?
Regards,
SGK

Hi,
Check the following :
1. that you have no filters in the InfoPackage, Transformations, update rules
2. Check you have authorisation to extract the data
3. Did you upload the master data first, HR is centric around Master data.

Similar Messages

Migration Problem in 2lis_11_vaitm for info cube 0SD_C03(Sales Overview)

Dear Experts
I am facing an issue for the data source 2lis_11_vaitm and 2lis_11_vcitm for info cube 0SD_C03. When i create transformation on update rule, it gets created with warnings but no issues. When i try making a transformation on update rule it gives errors about abap routines and start routines. Then i would go for migrating 2lis_11_vaitm but that cant be done because of above mentioned error. I have migrated other data sources same way. The reason i am doing so is because of making exact transformations as trsansfer and update rule.
My objectives is migrating 2lis_11_vaitm and 2lis_11_vcitm to 7.X etl flow. Am I right on the sequence of steps? cause my main issue is when my info package starts writing data in PSA in errors out for both 2lis_11_vaitm & 2lis_11_vcitm. The IDOC has the same problem. So migrating seems to be the only solution. Plz help and FYI my patch levels on bi system.
compo           Rel.              SP-lev.           Supp. pack                        Desc.
SAP_ABA     701     0010     SAPKA70110     Cross-Application Component
SAP_BASIS     701     0010     SAPKB70110     SAP Basis Component
PI_BASIS     701     0010     SAPK-70110INPIBASIS     Basis Plug-In
SAP_BW     701     0010     SAPKW70110     SAP Business Warehouse
BI_CONT     706     0000     -     Business Intelligence Content

The errors I face during the transformation activation while making them on the update rule are following.
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0HDCNT_LAST, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
Rule 39 (target field: 0CRM_PROD Group: 01 Standard Group): incomplete master data rule
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_CLASS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 44 (target field: 0VERSION): Initial update set
it has as many routine as many syntax errors in routine.

Problem in uploading data for the Tcode CA02

Hi,
I am trying to upload the data for the Tcode ca02 and i am facing a problem i.e. the uploading for the for the 18th inspection characterstic is not able to being uploaded. I had checked the code of it and the logic is there.
It was previously uploading the data for it,but iit is not doing now. I had cheked the program of the screen also the fields are also present..

would u plz send code.so i can check

Problems of using of Aggregates for Transactional Cube

Hi,
<b>Are there problems or disadvantages of using of Aggregates for Transactional Cube?</b>
Tx.
AndyML

Hi,
have a look at SAP's docu: http://help.sap.com/saphelp_nw04/helpdata/en/c0/99663b3e916a78e10000000a11402f/frameset.htm
/manfred

I have a problem with slow to timed out upload for emails with attachments.

Hi,
I hope I have landed in the right place?
The problem is relvatively new not linked to any specific upgrade event that I can recall.
I have an iMac in small office net, hard wired to a fritzbox.
1. The slow upload is independent of email software (Thunderbird and OS Mail) - slow for both (account data has been checked and re-checked and is OK).
2. Uploads from Ipad via WiFi appear normal and acceptable.
3. Uploads from my mac mini in the office are OK, for all accounts.
4. Sophos anti-virus reveals nothing sinister.
Does anyone have any ideas of what might be casuing this tardy and very frustrating functionality?
I must apologize if I have landed in the wrong place and would some kind soul might guide me to where I should be.
Many thanks
Mevado

What app are you using? From the message it sounds like a specific site problem.. For general wifi problem:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Delta Upload for Flat File

Hello Everyone
i am srikanth. i would like to know wheather do we have a facility for Delta Upload for flat file. If yes can u please give me the steps.
thanks in advance
srikanth

Hi Sabrina...thank you for ur help...i did load the data from cube to ods
steps.
1. i generated export data source on the cube
2. i found the name of the cube with prefix 8<infocube name> in the infosource under DM application component.
3. there are already communication structure and transfer rules activated but when i am creating update rules for the ods..i am getting the message 0recordmode missing in the infosource.
4. so i went to infosource and added 0recordmode in communication structure and activated but the transfer rules in yellow colour..there was no object assigned to 0recordmode but still i activated.
5.again i went to ods and created update rules and activated (tis time i didnt get any message about 0recordmode).
6.i created infopackage and loaded.
a)Now my question is without green signal in the transfer rule how data populated into the ods and in your answer you mentioned to create communication structure and transfer rules where in i didnt do anything.
b) will i b facing any problem if i keep loading the data into the ods from cube (in yellow signal) ..is it a correct procedure..plz correct me..thanks in advance

Problem while activting the pp cube 0pp_c01

Hi Guys,
While activating the Business content for PP Cube 0pp_c01.it was showing an error like Time conversion from 0CALDAY to OFISCPER(fiscal year) failed with value 19950817.Im loaded the data up to only PSA.Can anybody explain how to rectify this error.
Thanks,
Chinna
Points will be awarded

Hi,
Are u getting this problem while you do activation or while you do Uploading ?
I hope you are getting this problem while you are loading data to Cube.
Try this:
RSA1> Source system Tree> Right clcik on Your R/3 system from which you want to upload the data--> Transfer Global settings
With rgds,
Anil Kumar Sharma .P

Problem in Uploading a File by Applet

Hi Members,
* I have faced problem while uploading a file from client to server by ftp protocol using APPLET(No JSP) only
* I am getting exception while running....
* My source code is as follows,
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
import java.io.BufferedInputStream;
import java.io.BufferedOutputStream;
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.net.MalformedURLException;
import java.net.URL;
import java.net.URLConnection;
public class UploadAndDownload extends Applet implements ActionListener {
     Button upload;
     Button browse;
     TextField filename;
     File source = null;
     Label name;
     StringBuffer sb;
     BufferedInputStream bis = null;
     BufferedOutputStream bos = null;
     public void init() {
          setLayout(new FlowLayout());
          upload = new Button("Upload");
          browse = new Button("Browse");
          name = new Label("Filename");
          filename = new TextField("", 45);
          add(name);
          add(filename);
          add(upload);
          add(browse);
          upload.addActionListener(this);
          browse.addActionListener(this);
     public void actionPerformed(ActionEvent evt) {
          // Code for browsing a file
          String input_file_name = "";
          if (evt.getSource() == browse)
               Frame parent = new Frame();
               FileDialog fd = new FileDialog(parent, "Select a file", FileDialog.LOAD);
               fd.setVisible(true);
               input_file_name = fd.getFile();
               filename.setText(input_file_name);
               // Gets the file from the file dialog and assign it to the source
               source = new File(input_file_name);
               repaint();
          // Code for Uploading a file to the server
          if (evt.getSource() == upload) {
               // Appending the server pathname in string buffer
               sb = new StringBuffer("ftp://");
               sb.append("2847");
               sb.append(':');
               sb.append("Websphere25");
               sb.append("@");
               sb.append("172.16.1.111");
               sb.append('/');
               sb.append(input_file_name);
               sb.append(";type=i");
               try {
                    URL url = new URL(sb.toString());
                    URLConnection urlc = url.openConnection();
                    bos = new BufferedOutputStream(urlc.getOutputStream());
                    bis = new BufferedInputStream(new FileInputStream(source));
                    int i;
                    // Read from the inputstream and write it to the outputstream
                    while ((i = bis.read()) != -1) {
                         bos.write(i);
               } catch (MalformedURLException e) {
                    e.printStackTrace();
               } catch (IOException e) {
                    e.printStackTrace();
               } finally {
                    if (bis != null)
                         try {
                              bis.close();
                         } catch (IOException ioe) {
                              ioe.printStackTrace();
                    if (bos != null)
                         try {
                              bos.close();
                         } catch (IOException ioe) {
                              ioe.printStackTrace();
MY EXCEPTION IS,
Exception in thread "AWT-EventQueue-2" java.security.AccessControlException: access denied (java.net.SocketPermission 172.16.1.111:80 connect,resolve)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.ftp.FtpURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.ftp.FtpURLConnection.getOutputStream(Unknown Source)
     at UploadAndDownload.actionPerformed(UploadAndDownload.java:68)
     at java.awt.Button.processActionEvent(Unknown Source)
     at java.awt.Button.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)* Please let me know what problem in my code....
* Thanks in advance....

* Thanks for your reply....
* I have signed my policy file by giving AllPermission and mentioned in java.security file in bin folder....
* My question is , by giving AllPermission , can we access and do all permissions like ( SecurityPermission, AWTPermission, SocketPermission, NetPermission, FilePermission, SecurityPermission etc )...
* My policy file is looks like follow,
/* AUTOMATICALLY GENERATED ON Tue Apr 16 17:20:59 EDT 2002*/
/* DO NOT EDIT */
grant {
permission java.security.AllPermission;
};* If i signed the policy like above, and when i run the applet file in InternetExplorer now , it thorws the following exception on my console,
java.net.ProtocolException: cannot write to a URLConnection if doOutput=false - call setDoOutput(true)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
     at sun.net.www.protocol.ftp.FtpURLConnection.getOutputStream(Unknown Source)
     at UploadAndDownload.actionPerformed(UploadAndDownload.java:68)
     at java.awt.Button.processActionEvent(Unknown Source)
     at java.awt.Button.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)* Please let me know , how to solve this and give me your suggestion on the above process...
* Thanks in advance...
Regards,
JavaImran

Long text problem while uploading Inspection plan through BDC.

Hi,
I am facing some problem while uploading the inspection plan. There are few MICs for which we are having long text, while uploading the inspection plan through BDC - some other long text is getting copied into the MIC's long text. After checking I came to know that in function module, read_text - some text which is stored in ABAP memory is getting copied into the inspection plan.
I am working in SAP release 4.7. I have checked with SAP notes: 97419, but it is also not satisfying.
Waiting for quick solution.
Thanks in advance.
Fahié

Hi a®s,
Thanks a lot for your kind reply.
My requirement is I want to maintain long text for few MICs (which are not having long texts at MIC level) in inspection plan (QP01).
When I am trying to manually assign the MIC's to inspection plan (QP01), long text is copied whereas I am not clicking the long text icon in (QP01). Long text is not maintained in MIC level, still some long text is copied to this MIC. This was also happening while uploading the inspection plan thro' BDC.
I believe what you have mentioned about function module SAVE_TEXT cannot be used here since long text is already copied before we pass the long text. Also if we pass some long text, still apart from the long text what we have passed there is some other long text copied (extra long text).
Waiting for quick solution.
Thanks in advance.
Fahié

Problems installing iTunes for windows

Hi,
Just bought a lovely 30Gb black ipod video...however i cannot seem to install iTunes. The route of the issue seems to be that I have Sonic Record Now cd burning software installed already on my machine (straight from the shop).
When uploading for the first time using both the disc and from apple.com I got an error messages that said I had a conflict within the registry, something to do with my previously installed CD burning software - please re-install iTunes. When i removed iTunes my CD drive disappears and i have to do a system restore.
I have tried this a few times with no success - so decided to try and remove the Sonic Record Now programme...when i used the disc after this I just got a standard error message "iTunes has encountered a problem and has to close"....
I have not yet managed to download from apple.com again because i don't have internet at home...but I would imagine that i'll simply get the second error message again as above - i am really getting frustrated.
I gather its not an isolated problem - and have seen a few solutions but all of these seem to depend on a successful download of iTunes from apple.com - something that i can't yet do because of the registry conflict.
any ideas?
thanks
Mike.

Have you seen this?
http://docs.info.apple.com/article.html?artnum=93976
Also you might try just a quicktime standalone install.
http://docs.info.apple.com/article.html?artnum=93976

Problem in BDC for IA05 tcode.

Hi,
I am facing a problem while uploading data for IA05 t.code using BDC call transaction method.
when I an running thru BDC, in the operational overview, when i select an operational line item, and go for inspection characteristics overview and provide inspection characteristics, sampling procedure, version and press enter, an window is popping up which is asking for inspection method, plant for inspection method and inspection method version number.
but when I am running the tcode normally, this inspection window is not popping up and details are not being asked. these inspection method details are not neccessary for my business logic. how can I by-pass this popup window which i don't want even when I run thru BDC.
Thanks and Regards,
Krishna.

Hi Krishna
This is not the right forum to post this question. Post this to proper forum in order to get quick response.
Regards
Vaishali

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

Problems in uploading from excel sheet to internal table

hi experts,
i got one problem regarding uploading data from excel sheet to int.table. I used FM ALSM_EXCEL_TO_INTERNAL_TABLE but in that the value is char of 50. but i need a case where i have to send value more than 50 characters. please suggest me any other FM to overcome this problem.
advanced thanks
vijay

Hi,
>
Vijay Krishna Arvapalli wrote:
> hi tarun,
>
> thank you for your reply
>
> but when i tried to use FM TEXT_CONVERT_XLS_TO_SAP it is giving error actually that 'Error generating the test frame'.
>
> so can you suggest me with some other option where i can upload the field with more than 50 character length.
>
> thank you
> regards
> vijay
Yes, when you execute the FM from SE37, then it displays a message.
Just copy the below code and paste it in a report (SE38) and execute.
Create a file in C:/ with name test.xls and execute it will display the records even with more than 50 characters of length.
I have tested and its working.
I have taken three fields in the excel file empid, name and doj.
TYPE-POOLS : truxs.
PARAMETERS : p_file TYPE rlgrap-filename DEFAULT 'C:\TEST.XLS'.
DATA : BEGIN OF itab OCCURS 0,
         empid(150) TYPE c,
         name(150) TYPE c,
         doj(150) TYPE c,
       END OF itab.
DATA: it_raw TYPE truxs_t_text_data.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM f4_file_process USING p_file.
AT SELECTION-SCREEN.
PERFORM validate_file_path USING p_file.
START-OF-SELECTION.
PERFORM upload_data.
END-OF-SELECTION.
PERFORM display_data.
*&      Form F4_FILE_PROCESS
*       text
*      -->P_FILE_PATH text
FORM f4_file_process USING p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = 'P_FILE'
    IMPORTING
      file_name     = p_file.
IF sy-subrc NE 0.
    MESSAGE e000(zsd).
ENDIF.
ENDFORM.                    " F4_FILE_PROCESS
*&      Form VALIDATE_FILE_PATH
*       text
*      -->P_FILE text
FORM validate_file_path USING p_file.
DATA : lv_dir TYPE string,
         lv_file TYPE string,
         lv_result(1) TYPE c.
DATA : lv_filename TYPE string.
lv_filename = p_file.
CALL FUNCTION 'SO_SPLIT_FILE_AND_PATH'
    EXPORTING
      full_name     = p_file
    IMPORTING
      stripped_name = lv_file
      file_path     = lv_dir
    EXCEPTIONS
      x_error       = 1
      OTHERS        = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>directory_exist
    EXPORTING
      directory            = lv_dir
    RECEIVING
      result               = lv_result
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      wrong_parameter      = 3
      not_supported_by_gui = 4
      OTHERS               = 5.
IF lv_result IS INITIAL.
    MESSAGE 'Invalid Directory' TYPE 'E'.
ENDIF.
CLEAR lv_result.
CALL METHOD cl_gui_frontend_services=>file_exist
    EXPORTING
      file                 = lv_filename
    RECEIVING
      result               = lv_result
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      wrong_parameter      = 3
      not_supported_by_gui = 4
      OTHERS               = 5.
IF lv_result IS INITIAL.
    MESSAGE 'Invalid File' TYPE 'E'.
ENDIF.
ENDFORM.                    " VALIDATE_FILE_PATH
*&      Form UPLOAD_DATA
*       text
* --> p1        text
* <-- p2        text
FORM upload_data .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
      i_field_seperator    = 'X'
      i_line_header        = 'X'
      i_tab_raw_data       = it_raw
      i_filename           = p_file
    TABLES
      i_tab_converted_data = itab[]
    EXCEPTIONS
      conversion_failed    = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " UPLOAD_DATA
*&      Form DISPLAY_DATA
*       text
* --> p1        text
* <-- p2        text
FORM display_data .
LOOP AT itab.
    WRITE : / itab-empid, itab-name, itab-doj.
ENDLOOP.
ENDFORM.                    " DISPLAY_DATA
Hope this helps you.
Regards,
Tarun

How to avoid the split problem when uploading the data from csv file

Dear Friends,
              I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
      SPLIT wa_raw_csv AT ',' INTO
                wa_empdata_csv-status
                 wa_empdata_csv-userid
                 wa_empdata_csv-username
                 wa_empdata_csv-Title
                 wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR"   wil not be split into two words.
Thanks & Records
Madhuri

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

Problem of uploading data in Data Warehouse

I am using Oracle9i Warehouse Builder on Windows 2000 and i just started working in it. I am facing problem in uploading data from source schema to Target schema
     I) Created Source Moulde -- Link to One schema from where i have get data
     2) Created Warehouse Target Module -- I have created dimesnions , facts , Mapping and i deployed dimensions , fact and mapping. As a result of it i got dimension table , dimension , fact table , facts ,mapping package and TCL script for mapping. I deployed all of them and register TCL script with OEM .
     But my job created in OEM is not running. If run then does not upload any data and If I try to run job from the backend manually then it gives me message that No active job exist..
Thanks in advance
Surinder

I was getting the same error. I don't know if a step failed somewhere in the install or if I missed performing a manual step but I just fired up TOAD and manually inserted a record into the WB_RT_JOB table. I set the RTJ_JOBNAME = DEFAULT_JOB and RTJ_STATUS = BEGIN. The rest of the columns I just entered best guesses. I commited and then my job would run. I guess it just needs a seed record.
Lewis

Problem in Upload for HR Cube

Similar Messages

Maybe you are looking for