Problem in usb cable

i have a problem in my charger cable.
one of the lines has broken!
can it make a problem for my iphone?

If a wire is broken, you are just lucky it is one not needed for your present use, but all lines are needed for something. Best to get it replaced while it is not interfering with your use, and hopefully still under warranty.

Similar Messages

How do you fix the problem of USB cable is not compatable, when there is no cable attached?

how do you fix the problem of USB cable is not compatable, when there is no cable attached?

Just buy a new USB cable ... dont buy a cheaper one, i think it cost a $2...

Having problems with USB cable, please HELP!

While trying to download aim/aol I was having problems with my USB cable and my phone being connected, it was like they were showing they were conneted but when I tried to download aim it said no drivers were recognised. My phone was giving me the option when the USB cable was plugged in asking me if I wantd to do something to do with the media mass storage.
Anyway, once the drivers were downloaded to my comp and I plugged USB cable into my phone and comp i'm no longer being asked on my blackberry about the mass storage, my phone doesn't seem to be recogniaing tht it's linked up to my computer at all even though it's showing the little plug thing in my blackberry and coming up on the computer.
Is there anybody out there who can help me?!
Please!
Cheers!

Go to Options -> Media Card -> Mass Storage Mode Support: On
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Photoshop problema con usb cable

Mi p.c. no puede reconocer un sonyericcsson conectado a un USB cable;ya llevo 3 semanas tratando de pasar las fotos a la p.c.primero con un BLUETOOTH y ahora el USB.Ya se me acabó la paciencia pues ADOBE PHOTOSHOP que es el que viene con el software de sony nó sirve para nada.Por favor que alguien me ayude.
[email protected]

Armando Ruiz, primero tendrias que dar mas datos de la situación que vivís, porque en el otro post tambien no dijistes mucho, solo que no anda no anda y no anda, y asi no es facíl que ayudemos.
Primero, Adobe Photoshop no te tiene que reconocer al movil, eso lo tenés que ver desde el soft que te traiga el movil para hacerlo, en el caso de no traer ninguna utilidad mas es porque lo toma como almacenamiento masivo, pero no lo creo ya que solo tenés acceso a determinado sector de la info del movil, si lo tomara como masivo depende el sistema operativo que tengas para ver si necesita driver o no, asi que tendrias que pasar todos esos datos, ya que sin ellos sería todo inutil, si tenes soporte para bluetooth o no en el sistema, y te hago una aclaración:
"ADOBE PHOTOSHOP que es el que viene con el software de sony nó sirve para nada"
A esto te digo, Adobe Photoshop sirve para mucho mas de lo que vos o yo se puede imaginar, trabajo con el hace muchos años y nunca dejo de aprender de el como creo que a mas de uno le sucede, pero de ahi a decir que no sirve para nada, creo que tendrias que analizar tu problema por otro lado mas que por el "adobe no sirve para nada".
Explica bien tu situación y lo tratamos de ver, porque te aclaro algo mas, eso es un problema que no tiene nada que ver con Photoshop, ya que photoshop no maneja nada del sistema a la hora de compatibilizar un periferico, asi que la ayuda la vas a recibir en el caso de que yo o alguien de los que participan en este foro, los cuales son la mayoria personas con mucho conocimiento de lo que respecta a Photoshop, puedan por seguramente tambien convivir con ordenadores y haber resuelto situaciones de este tipo, pero creo que para la proxima vez que tengas un problema con tu movil tendrias que acercarte a foros relacionados a la telefonia movil o similar, asi como recurrir a la tienda en la que lo comprastes en el caso de que sea un desperfecto, o seguir paso a paso las instrucciones del mismo.
Aclara todo, y veremos que pasa, saludos.
dIEGo

I have a big problem! My ipod touch is stuck! it won't open, all I see when I open it is the itunes icon with a USB cable and an arrow! What can I do? I've tried connectingit with itunes, but itunes doesn't see it. plus i have windows 8

Can't connect my ipod toch to itunes!!! It doesn't see it! I use windows 8, don't know if that's the problem. Anyways, my ipod is stuck! Every time I open it, it stays stuck with the image of a USB cable with an arrow pointing towards an itunes icon. but whatever I do, my computer doesn't see it, and neither does itunes. What to do???!!!

The the remaining items of the following, you may have to let the battery fully drain.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

HT201263 my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?

Hi,
my phone is in recovery mode and wont restore. instead i receive the error message 1604. i have used alternative usb cables and am at a loss. has anyone else had this problem?

Hi there hstear93,
You may find the information in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
-Griff W.

My Ipod touch is frozen. Shows USB cable with arrow pointing to Itunes. What is the problem? This is the second one I have had that has done this!

My Ipod touch is frozen. The screen shows only USB cable with arrow point to the word Itunes. What is the problem? This is the second touch I have had that has this same problem. HELP!

This time try restoring the iPod to factory defaults/new iPod instead of from backup. You may have some corruption that is causing the problem and it may now be in the backup. If the problem persists after restoring to factory defaults/new iPod. then you likely have a hardware problem and ana ppointment at the Genius Bar of an Apple store is in order.

Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
thank you for your help.

Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

HT201210 In the attempt of updating the latest itune software, i am faced with the problem of not being able to be connected to itunes with my ipod touch that is blocked living the USB cable and the itune icons on my touch sceen. Can some one help me out

In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks

See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem.

Random Problems with Zen Micro? Try a diff. USB cable

I know people have mentioned this in other posts, but I thought I would reiterate it here. Many people seem to be complaining that their player is not recognized, or only sometimes recognized, or recognized by Windows (as a USB device) but not by their Creative software, or songs won't transfer, etc. Well, I had some similar problems which ALL went away when I started using a different USB cable - the one that shipped with the Micro just doesn't seem to work consistently.
So, if you are having problems with your player that you can't seem to solve any other way, you may want to try a different USB cable. It worked for me.
Hope this helps - I am (now) loving my new Micro!

I tried a different USB cable also, I thought that it would help, but I still got the same problems. I can almost guarantee that although you think you may have solved your issues, they WILL come back.
I've also been experiencing the "Player Not Connected" problem with my Zen Micro.
I've also had the problem where the Zen Micro just freezes in the "Docked" screen even after it has been disconnected from the PC
I've noticed that these are common problems with Zen Micros with the new firmware (.0.03)
My old Zen Micro with the old, original firmware did NOT have this connectivity problem
Creative should investigate these issues associated with this new firmware, or maybe even making the old firmware available for download to see if this really is the source of all these problems.

HP laserjet 6L connected thru USB cable printing problem

System Board ASUS M3A78-EM does not have LPT port on mother board.
Printer Model : HP Laserjet 6L Gold (Old printer) Connected thru USB cable (LPT to USB/USB to LPT)
O/S Windows XP
Driver installed automatically and port selected USB
Previously it was working fine but now a days, I am not able to print clear text on output.. It prints some words in italic, some of half italic, crucked letters. If I start my PC with printer switch off. When ever required printer, I switched ON printer and give command to print. It displays many time "printer failed to print this document". After reboot the system with switched on printer message does not displayed.
Can any one help to reolve this problem of uneven printing letters.
my email id is {Personal Information Removed}

I found this advice on another site:
"You will need to install drivers for your usb serial adapter, A good way to find which drivers to install (if u dont have them) is to click the apple Icon on the top left, 'about this mac'then click the 'More Info' on the window which appears, then look for USB devices.
Your serial adapter should appear as a usb device, THen google for the os x usb drivers for the chipset/adapter, or contact your vendor/look on sourceforge for it."
I don't know if that's the problem, but you should have gotten a driver disc with the converter cable. The one I just received for a pc client has a CD that says it's for Windows and Mac.
One problem though, the disc is a mini-cd. Not great for slot loading drives, and the driver says Mac 10.1 - 10.3.3. Maybe that's when they made the cable, but I wouldn't be very surprised if it didn't work with Leopard. It's going on a PC so I won't have to worry about it for now.
Side note about these cables - I have another client who wanted to control his ham radio gear from a Mac running WinXP on Parallels. It wouldn't work in WinXP until I removed the driver from the Mac side. Windows kept complaining that the device was already under control by another program - it meant Mac OS. I'm not sure how I would have been able to make the device work both ways, but luckily, didn't have to find out.
Leopard saw his Radio Shack cable fine from System Profiler.
Message was edited by: dechamp

USB Cable problem with HP Photosmart 7960 printer

This may sound like a stupid question but I just bought a new 7960 printer to replace my old 7960 which has two out of the three ink cartridge holders broken and the usb port on the new printer won't accept a usb cable. It appears to be blocked by a cap insert over the connector prongs which will not come out. Any suggestions?

Here is a link with some troubleshooting steps that may help to solve the issue you are having with your printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02065582&cc=us&dlc=en&lc=en&product=3940574&tmp...
Paper feed problems are a hardware issue, if none of these steps help I would recommend contacting HP for upgrade options. I have included a link with directions for contacting HP:
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
I am an HP employee.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Nokia 6700 USB cable connectivity problem -fixed-

Ok, got my 6700 today. Everything worked like a charm, until I tried to connect it to my PC using the supplied USB cable. I downloaded and installed the latest Nokia PC suite which supports this phone (7.1.30.9) and connected the phone. Vista was unable to install a driver, and the phone was listed in the device manager as 'unknown usb device'. The phone display reported 'no response from host' after plugging in the usb cable.
I searched online for a solution, and tried the following:
- repaired the install of the Nokia connectivity cable driver: no success.
- deinstalled the nokia pc suite, ran the pc suite cleaner, rebooted and reinstalled the pc suite: no success.
- threw away the unknown usb device in the device manager and plugged the cable back in so that Vista would try to install the driver again: no success.
- tried other USB slots (not behind HUB): no success.
At this point I was so frustrated that I decided to take out the supplied 1gb micro sd card and transfer some data to it using a card reader. When I looked in the root of the sd card, I noticed that there was an executable called pc-suite.exe there, among some other files. I decided to delete those files to see if they were causing the problems, I deleted the following files:
- autorun.inf
- launcher.exe
- pc-suite.exe
- qf
Replaced the micro sd card in the phone, plugged in the usb cable and voila: connection! Everything worked like a charm.
During my online search I noticed I wasn't the only one experiencing connectivity problems with the 6700. Maybe this fix will help other people as well, that's why I decided to post it here. ;-)
Peter

Thanks Peter, nice job - same problem, your solution is working. Shame on Nokia - i have so many problems with E52, and now with 6700 - why ? Is it so difficult to make a reliable software ? So disappointed ... maybe Apple is the solution - but after 10 years with Nokia why change with Apple ?

N81 USB Cable - Resolved problem!

I had problem with my N81. It wasn't connecting with my PCs using nokia's USB cable. No message was showing. Bluetooth was working fine. I was restarting PCs and mobile several times but without effect.
Then I remembered myself that I had same problem with my Logitech Steering-Wheel.
I plugged N81 to Playstation 2, unplugged, and plugged to PC. It resolved my problem. I got message on display of N81 to choose transmission mode!
It's strange, isn't it?

I had the same problem: I plugged the phone in my laptop's USB port -- and nothing no "ding dong" absolutely nothing! I tried plugging the phone to Linux box and no dmesg output here either.
I thought I broke the cable or the connector, and got a new one -- but nothing. It was driving me bonkers. Sometimes, I wish I would have gotten the iPhone instead -- seriously!
I discovered my "Playstation-less solution" for this problem by accident. OK, here we go:
1. Set a "quick alarm" in your clock application (i.e. two or three minutes past the current time).
2. Turn the phone off.
3. The phone will power up and your alarm will sound. Switch it off and the phone will ask you if you want to use the phone. Choose "Yes" here.
4. Boom, magically your phone will be recognized again when you plug it to your USB port and the N81 will ask you to choose the transmission mode.
5. You're done.
Don't ask me what happens in the phone when the alarm goes off, and how it got in that "non detect mode" in the first place but this is how I fix mine now. As an explaination how it might have gotten in that "non detect mode" the only thing I can think of, and this is pure speculation, is that I might have had the phone connected to the USB port while the Laptop was doing a reboot. In the boot sequence a USB device was recognized, and the PC tried to boot from it and this might be what screwed the phone up.
Let us know if this works for you as well
Anyway, good luck everyone.

Problem in usb cable

Similar Messages

Maybe you are looking for