Problem in Using Logical Database PNP

Hi Guru's,
I am using PNP logical database and rp_provide_from_last
macros statements to fetch data from PA Tables.
When i am doing extended syntax check it is showing more
than 60 error's in ECC 6.0 for below statements:
      1) Tables: Pernr
      2) Infotypes: 0001,0002. and
      3) RP_PROVIDE_FROM_LAST statements.
Could any please provide soloution how to clear all these.
Its very urgent.
Thanks in advance.
Regards,
Sunil

Hi Ramesh,
These are the type of error messages in exetnded syntax check:
The current ABAP command is obsolete
In the OO context either an INTO or an ASSIGNING specification or the addition
"TRANSPORTING NO FIELDS" must be used . be used. be used. be used. be used. be
used.
Internal Message Code: READ 018
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
      Program: Z_INT_I_PY_BONUSPAYMENT Include: Z_PY_F01_BONUSPAYMENT Row:    279
The current ABAP command is obsolete
At "LOOP AT itab" one of the additions "INTO", "ASSIGNING" or "TRANSPORTING NO
FIELDS" is required in the OO context . .
Internal Message Code: LOOP 012
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
      Program: Z_INT_I_PY_BONUSPAYMENT Include: Z_PY_F01_BONUSPAYMENT Row:    282
The current ABAP command is obsolete
In the OO context either an INTO or an ASSIGNING specification or the addition
"TRANSPORTING NO FIELDS" must be used . be used. be used. be used. be used. be
used.
Internal Message Code: READ 018
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
      Program: Z_INT_I_PY_BONUSPAYMENT Include: Z_PY_F01_BONUSPAYMENT Row:    282
The current ABAP command is obsolete
At "LOOP AT itab" one of the additions "INTO", "ASSIGNING" or "TRANSPORTING NO
FIELDS" is required in the OO context . .
Internal Message Code: LOOP 012
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)
Please suggest me some way to clear these if it is possible.

Similar Messages

Problem with using Logical Database PNP

Hello everybody!
When I use the logical database PNP in my program,a warning message appeared during the syntax check with Unicode checks actived.The message looks like below:
Include DBPNPCOM.
In Unicode programs,the "-" character cannot appear in names,as it does here in the name "PNP-SW-FOUND".
Include DBPNPCOM.
In Unicode programs,the "-" character cannot appear in names,as it does here in the name "PNP-SY-TABIX".
Anybody know how to deal with this problem?
Regards
Brian Liu

Hi,
You can either ignore the warnings or uncheck the 'Unicode checks Active' checkbox in the program attributes. In fact you get the same warnings off most standard SAP HR Reports.
Good luck,
Suresh Datti

How to hide selection fields when using logical database PNP

hi.
i m using a logical database PNP and report catagory 1PY_DEF in my program.
but when i execute it , it shows to selection box. one name is period and second is selections.
but i just want to show only period box selection fields , not the selection box fields.
how it iz possible.

HI,
In my case i haved used the PNP logical database..in the selection box i don't wnat to display Contorling area,Cost Center & Organizational Unit. i have written this code to hide those fields..
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name CS 'PNPKOKRS' OR
       screen-name CS 'PNPKOSTL' OR
       screen-name CS 'PNPORGEH'.
      screen-active = '0'.
      screen-invisible = '1'.
      MODIFY SCREEN.
      CLEAR screen.
    ENDIF.
ENDLOOP.
Try modify hide the total block instead of individual fields in that block.

To use logical database PNP in class builder

Hi
Inside the class builder (SE24), i have a created a method.
Now while implementing that method, that is between method and endmethod
statement can i implement logical database PNP or PNPCE.
If 'yes' how to use it.
if 'no' what is the other way to implement authorization.
Pls help me

Hello,
assume that the routines GET_ITnnnn are written by yourself. For reading infotypes ABAP Objects provides us with same very helpful classes as shown below:
* define data
DATA:
 gif_employee type ref to if_pt_employee,
 go_employee type ref to cl_pt_employee,
 gt_infotypes TYPE tim_tmw_itlist_tab,
 go_control TYPE REF TO if_pt_td_control,
 go_data TYPE REF TO if_pt_td_base,
 go_pnnnn TYPE REF TO if_pt_td_itnnnn,
 gt_p0001 TYPE TIM_P0001_TAB,
 gt_p0002 TYPE TIM_P0002_TAB,
 gt_p0003 TYPE TIM_P0003_TAB.
start-of-selection.
GET pernr.
* Create employee instance
gif_employee = cl_pt_employee=>get_employee( pernr ).
go_employee ?= gif_employee.
* Get master infotypes (0001, 0002)
CALL METHOD go_employee->get_master_data
 EXPORTING
 im_begda = id_fromdate
 im_endda = id_todate
 IMPORTING
* EX_I0000 =
 EX_I0001 = gt_p0001
 EX_I0002 = gt_p0002
* EX_I0007 =
* EX_I0008 =
* Append all other required infotypes to itab
APPEND '0003' TO gt_infotypes.
CALL METHOD go_employee->get_infotypes
 EXPORTING
 i_itlist = gt_infotypes
 i_fromdate = id_fromdate " start date
 i_todate = id_todate " end date
* I_FILTER =
 i_noauthcheck = 'X'
 IMPORTING
 e_result = gt_infty_request
 e_retcd = gd_retcd.
* Please see documentation of parameter e_retcd...
LOOP AT gt_infty_request INTO go_control.
 go_data = go_control->data. " get data object
* Casting
 TRY.
 go_pnnnn ?= go_data.
 CATCH cx_sy_move_cast_error.
 CONTINUE.
 ENDTRY.
* Convert infotype (semi-transparent -> transparent)
 CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
 EXPORTING
 prelp = lo_pnnnn->prelp
 IMPORTING
 pnnnn = gs_p0003.
 APPEND gs_p0027 TO gt_p0003.
ENDLOOP.
The class CL_PT_EMPLOYEE provides us already with very easy access to so-called master infotypes (000, 0001, 0002, 0007 and 0008). All other infotypes can be read using method GET_INFOTYPES.
Using these classes we have a very convenient and standardized way of accessing all kinds of infotypes.
Vasanth

Radio Button problem when using Logical Databases.

Hi,
I have a report that uses logical database PCH. I'd like to default the reporting period radio button so that when the report is run it is defaulted to today.
The name of the screenfield is PCHZTR_D so I set
PCHZTR_D = 'X'.
in the initialisation event but this doesn't work.
Any suggestions how I can get the reporting period to default to 'today' programmatically.
I don't want to use a variant.
Thanks,
Paul

Try doing it in the AT SELECTION-SCREEN output Event.
report zrich_0001.
nodes: objec.
at selection-screen output.
PCHZTR_A = space.
PCHZTR_D = 'X'.
REgards,
Rich HEilman

Logical database PNP not retrieving data for custom infotypes.

Hi all,
I am using logical database PNP in a program. I have declared infotypes as follows:
INFOTYPES: 0001, 0002, 0041, 9801, 9840.
The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
regards,
Hamza

solved

How does works default parameters in a program with logical database PNP?

Hi Friends,
I have a basic program, i need to filter info with period parameters in a program that uses logical database PNP, but it doesn't work.
If i use "person selection period" that it's suposed to filter info according to infotype 0001 (as the sap help says), it doesn't work, i use: PNPBEGPS = today and PNPENDPS = today, and the result it's a lot of registers that doesn't meet that criteria.
Also i tried with: data selection period, today, up to day, current month. And the result it's with the same problem.
How does works period parameters in a program with logical database PNP?
This it's the program example, i use the default category.
REPORT ZRPHRTEST.
tables: pernr.
infotypes: 0001.
start-of-selection.
get pernr.
write: pernr-pernr, p0001-begda, p0001-endda.
end-of-selection.
write 'fin'.

Hi,
Define pernr table under tables statement then and use GET PERNR event.This get event is followed by End-Of-Selection.
Syntax: Tables pernr.
Get pernr.
Try, activate and test. This should solve your problem.
Regards,
Abhijeet

Logical Database PNP cannot fetch correct data?

I use logical database PNP fetch HR master data.
PA0001 has records with company code = 0960 .
But can not fetch data using GET PERNR.
however
PA0001 has not records with company code = 0770 .
But it got so many data using GET PERNR.
WHY..............
person originally transferd from 0770 to 0960, It is OK.

I belive this is not concurent employment why we need to use
PNPCE
Please be specific about your question
Regards

Selection screen for logical database PNP..

hi all,
I am having a requirement to produce a HR Report where i need to use logical database PNP. Now the issue is i need to supress some of the elements of standard selection screen of PNP and add a couple of fields of mine.
i have been looking all around and i got few of the below methods.
its good to use a report category.
somewhere it says include it in ur program using selection screen block..
can you please guide me which is the best way and what would be a perfect solution?
thanks in advance,
Reena

Hi reeena,
1. simple
2. u want to
a) add ur own fields
b) suppress some fields
3. a) is simple, just add your parameters,
   in your program, and they will appear
   b) use SCREEN logic
4. just copy paste to get a taste of it
(it will HIDE the PAYROLL AREA field)
and add MATNR field
5.
report abc.
TABLES : PERNR.
PARAMETERS : MATNR LIKE MARA-MATNR.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-NAME CS 'ABKRS'.
      SCREEN-INVISIBLE = '1'.
      SCREEN-INPUT = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
regards,
amit m.

Selection screen and logical database PNP

hi all,
I am having a requirement to produce a HR Report where i need to use logical database PNP. Now the issue is i need to supress some of the elements of standard selection screen of PNP and add a couple of fields of mine.
i have been looking all around and i got few of the below methods.
its good to use a report category.
somewhere it says include it in ur program using selection screen block..
can you please guide me which is the best way and what would be a perfect solution?
thanks in advance,
Reena

In the Program Attributes, click on the pushbutton 'HR Report Category'.Click on the 'Create' icon in the pop-up window that comes up. You will get a list of all the available Report Categories. Go through the list & if you don't find one that suits you, select one that is closest & click on the 'Copy As' icon in the menu bar..
Now, you can remove the unwanted fields & add yours for selection. save it & and attach it to report in the attributes.
~Suresh

Logical database PNP (Suppress message)

Hi,
      we are having 1 report which is using logical database PNP
      this is being shown in ALV
      when the user runs the report the output is shown and after pressing BACK button the below lines are being shown
Personnel numbers skipped by the database driver
Reason 1: insufficient authorization, no. skipped personnel nos.:
this is being done by logical databse program SAPDBPNP
is there any way to supress this mesasge
thanking you in advance
regards
Sai easwar

I belive this is not concurent employment why we need to use
PNPCE
Please be specific about your question
Regards

Regarding logical database PNP

Hi all:
     I am learning to use logical database PNP,
    Originally, there are some buttons like 'Further selection' 'selection helps ' 'Sort order' at the top of selection screen. How could I control them? If I just use some of them , like 'Further selection' , How could I remove the other two from the selection screen ?
     what's more, How could I add button like 'Org. struture' at the top which doesn't exsit originally?
Thank you very much!

Hi,
You need to select the appropriate Hr Report Catageory in the Program Atrributes. If you did not find the suitable one you can create the new as per your requirement and assign it in the Hr Report Catageory of the Program attribute.
Edited by: Avinash Kodarapu on Mar 11, 2009 3:56 PM

Logical Database PNP. HR and Unicode

Hi,
currently we are checking all programs to make them unicode compliant. Using the logical database PNP a lot of macros is loaded automatically. One of them is
rp_provide_from_last (or rp_provide_from_frst) to get the last record in a specifed time-interval. The existance is stated in varaible named pnp-sw-found, it is 0 if no record was found and 1 if there is one in existance.
Checking the program (normal syntach check and extended syntax check) leads to the warning that varaibale names with a hyphen are no longer allowed in unicode programs if its not a structure (and pnp-sw-found is not). The program is doing well, and transaction UCCHECK does not mention this error/warning at all. Has someone experience with that issue and perhaps a solution?
cu
Rainer

Thanks for the answers so far. Using PNPCE does not resolve my problem, cause we have a lot of own written reports and i just want to avoid to change them all.
And using PNPCE idoes not solve the problem, that i have to use pnp-sw-found, this one is still in existance and gives still the warning that thois is not unicode compliant.
Switching off the unicode flag is no good idea if we wanna go for unicode.
Anyone else with experience in unicode in the HR Area?

HR Logical database PNP. OO to fill table dynamic table from PNP ?

Hi all
I want to get some stuff from the HR logical database into a dynamic table
Here's a real simple example that writes info out to a normal list.
(report is based on using Logical DB PNP)
tables: pernr.
INFOTYPES: 0001, "Organizational Assignment
 0002. "Personal Data
SELECT-OPTIONS: language FOR p0002-sprsl.
INITIALIZATION.
pnptimed = 'D'.
GET pernr.
PROVIDE * FROM p0002 BETWEEN pn-begda AND pn-endda.
 CHECK language.
 WRITE: / p0002-pernr,
 sy-vline,
 p0001-ename,
 sy-vline,
 p0002-sprsl,
 sy-vline,
 p0002-gbdat.
ENDPROVIDE.
endform.
Now what I want to do is replace the write stuff by appending the entries into a dynamic table which I will display as an ALV Grid.
so I add my structure in the data declarations
types: begin of s_elements,
 pernr type p0002-pernr,
 ename type p0001-ename,
 sprsl type p0002-sprsl,
 gbdat type p0002-gbdat.
drop_down_handle type int4.
types: end of s_elements.
include zz_jimbo_incl.
build the dynamic table
create data dref type s_elements.
assign dref->* to <fs>.
i_routine = 'POPULATE_DYNAMIC_ITAB'.*
i_names = 'NAME_COLUMNS'.
i_gridtitle = 'HR TEST'.
invoker = sy-repid.
i_zebra = 'X '.
i_edit = ' '.
call function 'ZZ_CALL_SCREEN'
 exporting
 invoker = invoker
 my_line = <fs>
 i_gridtitle = i_gridtitle
 i_edit = i_edit
 i_zebra = i_zebra
 i_names = i_names
 i_routine = i_routine
 importing
 z_object = z_object
 dy_table = dy_table.
Now to populate the dynamic Itab the routine below is entered.
form populate_dynamic_itab changing dy_table.
assign dy_table->* to <dyn_table>.
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
However I can't use GET / PROVIDE / ENDPROVIDE in a Form.
Anyway round this ---seems HR has an aversion to OO.
Cheers
jimbo

Hi,
well, GET_PERNR is a so called event_statement. It has nothing to do with ABAP 00.
Normally it will be like this:
START-OF-SELECTION.
GET_PERNR.
PROVIDE ....
END-OF-SELECTION.
-> and here the CALL SCREEN NNNN for ALV-Display.
Provide-statements you can use in forms of course, and as many times you want during GET and END-OF-SELECTION.
But as I understood : you just want to save the write-statements?
I always develop a DDIC-Structure, declarate the data objects in the programm, read the data via Provide into the infotypes, and then make a move-corresponding to my structure. and display it.
Normally no problem.
kind regards
maik

How to use Logical database in function module?

I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.

You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards

Problem in Using Logical Database PNP

Similar Messages

Maybe you are looking for