Problem in using RUN_REPORT_OBJECT

I am trying to use following code to call a report from a menu of a .MMB file.
my_rep_id := find_report_object('my_report');
my_rep := RUN_REPORT_OBJECT(my_rep_id);
This 'my_report' has been developed in report builder independently of Forms 6i.
Now the problem is that find_report_object is unable to find 'my_report'
It gives error no. FRM-41219. Can't find report: Invalid ID.
Pl. guide.
Tariq

Thanks Malik,
RUN_PRODUCT does work but I still want to know about RUN_REPORT_OBJECT because I have the impression that Oracle now recommends RUN_REPORT_OBJECT instead of RUN_PRODUCT.
Thanks again.
Tariq Hi
You have to create a report object within the form.
If you look at the Object NAvigator in the Form Builder right below Record Group
tou would see an option for Report. Create a new report object.
Set the following properties for that object
Filename - This should be the name of your RDF file you created from Report Builder along with the full path.
Set the Execution Mode, Communication Mode and Report Destination Type as per your requirements.
In the parameter for find_report_object() pass the name of the report object you created.
eg.
if the name of the report object you created is Report2 then
your call should be rep_id := find_report_object('Report2') .
You are calling the report object which has been created in your form builder and through that call you are running the report file specified in the Filename property of that report object.
Regards
Poorvi

Similar Messages

Problem in using RUN_REPORT_OBJECT built-in ?

I am trying to use following code to call a report from a menu of a .MMB file.
my_report_id := find_report_object('my_report');
my_report := RUN_REPORT_OBJECT(my_report_id);
This 'my_report' has been developed in report builder independently of Forms 6i.
Now the problem is that find_report_object is unable to find 'my_report'
It gives error no. FRM-41219. Can't find report: Invalid ID.
Pl. guide.
Tariq

Hello,
Have you created a "reports object" in Forms ?
(watch under the Reports node in the "Object Navigator".
Regards

How to create the trace file using run_report_object at runtime

Dear All
using :
Oracel Application Server 10g
Oracle Database 11g
Windows XP/sp3
I'm using run_report_object to call a report inside the form. THis report is running OK from reports builder, however it's too slow when run from Application server.
How Can I create a trace file (at runtime) that contains the time spent in sql and formating the layout of the report ??
Here is My code :
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'INVOICE.REP');
v_url :='paramform=no';
v_url := v_url||' FROM_NO=' || :PRINT_BLOCK.FROM_NO ;
v_url := v_url ||' TO_NO=' || :PRINT_BLOCK.TO_NO ||' FROM_DATE=' || v_from_date ||' TO_DATE='|| v_to_date ||' NO_DATE=' ;
v_url := v_url ||:PRINT_BLOCK.NO_DATE||' IDENT=' ||:PRINT_BLOCK.IDENT_NO||' REPORT_HEADING='''||V_REPORT_HEADING||'''' ;
v_url := v_url||' COMPANY_NO='||:global.company_no;
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,v_url);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,:GLOBAL.INV_REPORT_SERVER_NAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
v_rep := RUN_REPORT_OBJECT(repid);
IF rep_status = 'FINISHED' THEN
V1:='/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1);
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?server='||REPORT_SERVER_NAME,'_blank');
END IF;
Thanks a lot

Slow running reports often are not the result of a flawed report, but rather a flawed configuration. For example:
1. If you call your reports (from Forms) via the default or inProcess Reports Server, often because startup time is slow, it will appear that it took too long for the report to be delievered. Using a stand-alone Rep Server is the preferred way to do this.
2. If your Forms application makes numerous calls to RRO (RUN_REPORT_OBJECT), this can tend to result in what might appear as a memory leak (although it is not). The result is delayed processing because of the excessive memory use. This problem has been overcome in Forms/Reports 11 by the use of JVM pooling. However in v10 enabling "6i compatibility" mode is the way to overcome the issue. See Note 266073.1
3. If the report runs fine from the Builder and it is connecting to the same db as when you run it from App Server, the issue is unlikely a db problem. However, if you want to look anyway, enable sqlnet tracing.
4. To enable Reports tracing and investigate other tuning options, refer to the Reports 10 documentation:
http://docs.oracle.com/cd/B14099_11/bi.1012/b14048/pbr_tune.htm
Almost forgot to mentioned this one....
If you are using a v11 db with App Server 10, you will probably want to consider reviewing Note 1099035.1 as it discusses an issue related to performance with such a configuration.
Edited by: Michael Ferrante on Apr 10, 2012 8:49 AM

Defining SERVER_NAME to use RUN_REPORT_OBJECT on a hardware load balancer

Hi everybody,
We are deploying a Forms application on OAS (actually Forms & Reports Services - FRS) 10.1.2.0.2 using a hardware load balancer, that distributes workload between two FRS instances on separate computers.
Forms work without a hitch, but it is executing reports that's not working.
The problem is that when using RUN_REPORT_OBJECT you have to supply the REPORT_SERVER parameter, and each computer has a different report server name, but you don't know in advance wich FRS instance you are going to connect to, because the URL is that of the load balancer.
We thought that omitting the report server name from the report_object would do the trick but then we get an "FRM-41211 integration error" message
What would be the right o recomended way to solve this problem?
Thanks in advance,
Miguel.

What would be the right o recomended way to solve this problem?I don't know what would be the right or recomended way, I can say how we solved the problem in our Forms/Reports applications.
We have a lookup table where each machine has some parameters configured, one of which is the reports server name. The first form in each application identifies the machine where it's running, and reads corresponding rows in that table.

Problem in Using Oracle with Thin Clients(Image) Technology

I am running Oracle on Server and mine clients are thin clients.I have image on Oracle Server from where I am booting thin clients.The Problem I am facing is when I use single Thin client then everything works but as I starts using more than one thin client mine I got the error rwrun60 and it gives the that close or ignore message.I am using run_product for running reports.Then I tried to use run_report_object but how can I pass paramater using run_report_objects

i m not getting much from what you are saying.... but i found something.i created a windows application and then was able to create a dataset from ODAC connection to oracle. then dragging the dataset on windows form... i was able to create a data grid containing the data. hittin F5 the app was running successfull. however when tryin to do same in asp.net...when configuring the data source using sql datasource it gave me following error ...
ORA-00942: table or view does not exist
help help

How do I launch report from menu using RUN_REPORT_OBJECT?

Hi all,
Re: How do I launch report from menu (and have it print to the screen) using RUN_REPORT_OBJECT?
I am using Oracle 9iAS on Windows 2000 and I have a similar problem with launching reports from the menu. The application should call the report via the RUN_REPORT_OBJECT builtin feature from Forms. The report is never displayed.
The report is in the same folder as the menu form calling it. Do the reports have to be in a specific format? How do I get the report_id?
The name of the report is seconds_calls. No user-specified parameters are passed. Also, the report object in the object navigator in Forms is Report4 (is this relevant?)
When I try to run report via the form using this code:
DECLARE
     report_id REPORT_OBJECT;
     rep_status VARCHAR2(200);
     v_rep VARCHAR2(100);
     report_job_id VARCHAR2(200);
--     job_number NUMBER;
--     server_name VARCHAR2(200) := 'repserver';
BEGIN
     report_id:= FIND_REPORT_OBJECT('seconds_calls');
     rep_status:=REPORT_OBJECT_STATUS(report_job_id);
     v_rep := RUN_REPORT_OBJECT(report_id);
END;
I get this error message:
FRM-41219 Cannot find report:Invalid ID
And this message
FRM-40738 Argument 1 to builtin RUN_REPORT_OBJECT cannot be null
When I tried to use the same code (above), substituting the object name for the form name,
I got these messages:
FRM-41219 Cannot find report:Invalid ID
FRM-40738 Argument 1 to builtin RUN_REPORT_OBJECT cannot be null
And FRM-10259 Invalid null argument to packaged procedure or function (???)
Any ideas?
Cheers,
Pippa

Philippy,
substr(v_rep,instr(v_rep,'_',-1)+1)
This code extracts the Reports job id from the Reports Server name. The run_report_object() built-in
retrieves e.g. RepServ_9 as a job id, but in Reports9i you only need the '9' as a value to retrieve the
output.
Use the following sample a template. It is a procedure that expects the reports object name, teh reports server name and the
output format as an argument. The call to Web.show_document expects the ReportsSrevices to be accessible from teh same server
(relative addressing is used)
PROCEDURE RUN_REPORT_OBJECT_PROC (vc_reportobj Varchar2, vc_reportserver varchar2, vc_runformat varchar2) IS
v_report_id           Report_Object;
vc_ReportServerJob      VARCHAR2(100); /* unique id for each Report request */
vc_rep_status      VARCHAR2(100); /* status of the Report job */
vjob_id               VARCHAR2(100); /* job_id as number only string*
BEGIN
/* Get a handle to the Report Object itself. */
v_report_id:= FIND_REPORT_OBJECT(vc_reportobj);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
/* Define the Report output format and the name of the Reports Server as well as a user-defined parameter, passing the department number from Forms to the Report. We don't need a parameter form to be displayed, and therefore paramform is set to "no". */
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT, vc_runformat);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER, vc_reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,      'p_deptno='||:dept.deptno||'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(report_id);
/* remove the Reports Server name from teh job id */
vjob_id := substr(vc_ReportServerJob,length(reportserver)+2,length(vc_ReportServerJob));
/* Check the report status if finished. */
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status='FINISHED' THEN
/* Call the Report output to be displayed in a separate browser window.
The URL for relative addressing is only valid when the Reports Server
is on the same host as the Forms Server. For accessing a Remote Reports
Server on a different machine, you must use the prefix http://hostname:port/ */
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid '||vjob_id ||'?server='vc_reportserver,'_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Frank

I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
     Dim r as New ReportDocument
     'v is the name of the Crystal ActiveX Report Viewer Control
     r.Load("C:\Report1.rtp")
     v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
Chi

VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ

Problem in using FM SELECT_TEXT

Hi friends,
I have a problem in using fm SELECT_TEXT.
Here I want to fetch Material PO text in Material master to my report.
I just dont know in which field of table "it_thead" the actual text is available.\
I tried debugging the program but was not successful.
I have also tried using READ_TEXT but it gives an error if no Text exists.
    CALL FUNCTION 'SELECT_TEXT'
      EXPORTING
        client     = sy-mandt
        object     = 'MATERIAL'
        name       = wrk_matnr
        id         = 'BEST'
        language   = sy-langu
      TABLES
        selections = it_thead.
How do i print the actual MAterial PO text in IT_THEAD ?
hope u understand the question...please do let me know if any details are required from myside..

Hi,
My mistake.
Check below sample code.
PARAMETERS: po_matnr TYPE mara-matnr.
DATA: i_lines TYPE STANDARD TABLE OF tline,
      wa_lines TYPE tline,
      l_matnr TYPE thead-tdname.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = po_matnr
IMPORTING
   OUTPUT        = po_matnr
MOVE po_matnr TO l_matnr.
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    ID                            = 'BEST'
    LANGUAGE                      = sy-langu
    NAME                          = l_matnr              "Pass material with leading zeros
    OBJECT                        = 'MATERIAL'
*   ARCHIVE_HANDLE                = 0
*   LOCAL_CAT                     = ' '
* IMPORTING
*   HEADER                        =
TABLES
    LINES                         = i_lines
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT i_lines INTO wa_lines.
WRITE: /1 wa_lines-tdline.
ENDLOOP.
Just execute this code by inputting ur material number.
If the text doesnot exist the error u r getting because of not commenting the MESSAGE statement after FM call. Try in the way i told above.
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Feb 28, 2009 4:36 PM

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

The_Tonmoy wrote:
I have no communication with my that friend :/ So it means i need to delete those apps? There's no other solution to update those apps?
No. purchases are forever tied to the apple ID used to buy them. Delete them and buy your own copies.

Problems in using database link

Hi all,
I have problems in using the following created database link:
Name: fzanalyze
User: fzanalyze
PWD: xxx
Host: fz.domain.com
I get the following error message, if I try to start this select:
select * from tab@fzanalyze;
FEHLER in Zeile 1:
ORA-12154: TNS:Couldn't resolve service name
The problem, the TNS is correct, because I copied the hoststring from the tnsnames.ora. Also I can connect to the database by using the given hostname as follows:
connect fzanalyze/[email protected]
connected
What could be the problem, the I get the tns-Error, although I can connect normal to the database??
Thanks for helping
Dana

Dana,
Unlike Kamal, I don't use SQLNET anymore (isn't it obsolete from 8i+?), so I don't have any sqlnet.ora on my client or server.
I'm not really a sysop, so no clever thoughts behind the following ideas, I just use these for development purposes at home:
IP range at home = 192.168.x.x segment (another router server connects to the internet)
Oracle server computer name = dbserver.seinpost.nl (local address = 192.168.1.110)
instance entry in $TNS_ADMIN/listener.ora @ server:
    (SID_DESC =
      (GLOBAL_DBNAME = inst04.seinpost.nl)
      (ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
      (SID_NAME = inst04)
    )instance entry in $TNS_ADMIN/tnsnames.ora @ server:
INST04.SEINPOST.NL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = dbserver.seinpost.nl)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = inst04.seinpost.nl)
)instance entry in tnsnames.ora @ client:
INST04 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS =
        (PROTOCOL = TCP)
          (HOST = 192.168.1.110)
            (PORT = 1521)
    (CONNECT_DATA =
      (SERVICE_NAME = inst04.seinpost.nl)
)So again, no sqlnet.ora and as you can see only on my client I use local IP addresses to prevent my client for searching the internet for the non-existing dbserver.seinpost.nl address
Hope this helps,
Michiel

Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
Sequence of events:
The main error message is always:
An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
Yesterday, I opened Disk Utility and verified the disk. Got this error:
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
Starting manual backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Found 145601 files (11.88 GB) needing backup
16.1 GB required (including padding), 620.77 GB available
Copied Zero KB of 11.88 GB, 0 of 145601 items
Copied 0 files (Zero KB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
Ejected Time Machine network volume.
Starting automatic backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
Does anyone know what the problem is here and what I should do?
Thanks,
Tery

You have repaired your boot drive (which is good) but have you repaired your time machine drive? I don't own a Time Capsule so I don't know if disk utility can operate on it. If it can, you should repair it as well. You may need to erase it and start a new backup. That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

Problem in using RUN_REPORT_OBJECT

Similar Messages

Maybe you are looking for