Problem in using SAXParser

Thanks for your precious time in looking at this thread.
// I compile this class that I have done
c:\test>javac Echo01.java
// I tried to echo the information in xml file onto command prompt
c:\test>java Echo01 webservice.xml
// This is the result
<?xml version="1.0" encoding="UTF-8"?>
<framework>
<application>
<name>mhb</name>
<type>servlet</type>
<location>http://localhost:7001/mhbweb/mhb/SOAPListenerServlet</location>
</application>
<application>
<name>thb</name>
<type>class</type>
<location></location>
</application>
</framework>
However, I wanted only below to be printed instead of the whole chunk
<framework>
<application>
<name>mhb</name>
<type>servlet</type>
<location>http://localhost:7001/mhbweb/mhb/SOAPListenerServlet</location>
</application>
</framework>
Can anyone advise me what to do? Thanks

I would advise you to change your program. Based on what I can see of your program, that's all the advice I can give.

Similar Messages

Problems with using SAXParser.parse with an InputStream

Hello:
I have successfully run the echo01 program from the XML tutorial. I made the following changes to parse the output from a servlet which generates an XML document.
URL recordedSensor = new URL("http://redbd01:8010/servlet/RecordedSensor?vin=1M000000000000001");
URLConnection rsConn = recordedSensor.openConnection();
// Parse the input
SAXParser saxParser = factory.newSAXParser();
saxParser.parse( rsConn.getInputStream(), handler);
I get the following errors when I try to run the code.
org.xml.sax.SAXParseException: java.lang.NullPointerException
at org.apache.crimson.parser.Parser2.parseInternal(Parser2.java:524)
at org.apache.crimson.parser.Parser2.parse(Parser2.java:305)
at org.apache.crimson.parser.XMLReaderImpl.parse(XMLReaderImpl.java:442)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:393)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:191)
at ServletInterface.main(ServletInterface.java:29)
I think I have the problem narrowed down to the handlers accessing the class variable out which is a Writer the emit() method uses to output the document. When I replace out.write in emit() with System.out.println() the code works.
I've tried accessing other class variables in the handler methods with similar results.
Anybody encountered similar problems? And what is the solution.
Thanks in advance,
Gary

I have the same problem, if you find a solution let me know. I've double checked my objects to make sure their not null, I've checked my constructors in the extended default handler, not really sure where else to look, its such a simple program....

How to remove/ignore the element using SAXParser

hello all,
I want to parse the text content in string from the existed xml file. but had problem with the parser. Does anyone have good idea, how to remove or ignore the <link> tag in tag <text>?
IS: the output is only the rest of part text behind <link style="blue" src="www.test.com" />.
Wanted: the whole text in <text> tags. like "Reach more customers by creating targeted micro-sites using test's multi-store retailing functionality."
Given below is my code :
<?xml version="1.0"?>
<test xmlns="http://www.test.com/test">
<title>test title</title>
<text>Reach more customers by creating targeted micro-sites using test's<link style="blue" src="www.test.com" /> multi-store retailing functionality.</text>
</test>java code using SAXParser
public void startElement(String uri, String localName, String qName, Attributes attributes) throws SAXException {
public void endElement(String uri, String localName, String qName) throws SAXException {
    if (qName.equals("text")) {
      System.out.println("content: " + text);
public void characters(char[] ch, int start, int length) throws SAXException {
    String str = new String(ch, start, length);
    if (str.length() > 0)
      text = text == null ? str : text + str;
...Edited by: lauehuang on Sep 9, 2008 4:37 AM

i think u can't modify the xml file using SAX
SAX is only for reading XML
for any modifications in xml file u have to use DOM parser....
correct me if i m wrong....
Thanks & Regs
Ravi

Using saxparser in the suite method from junit

Hi, i have a problem using SAXParser in the suite method of junit.
My little test class 'myParser' works fine but when I call the method 'doIt' from the 'suite' method from a class that implements TestCase (junit) I get a java.lang.ClassCastException: org.apache.xerces.parsers.StandardParserConfiguration
in line 7.
Does anyone have an idea what I made wrong??
1) public class myParser {
2)
3)   public myParser() {}
4)
5)   public void doIt() {
6)     try {
7)       org.xml.sax.XMLReader parser = new org.apache.xerces.parsers.SAXParser();
8)       parser.parse("anyFile.xml");
9)     } catch (java.io.IOException IOe) {
10)       System.out.println(IOe.getMessage());
11)     } catch (org.xml.sax.SAXException SAXe) {
12)       System.out.println(SAXe.getMessage());
13)     }
14)   }
15) }

Hi JPilot,
I�ve this problem, too.
greez ZB

Help: How to Validate XML using SAXParser and return the entire error list

Hi,
I have a problem, I'm trying to validate a xml document against the DTD. Here Im using SAXParser and having the ErrorHandler object passed when setting the error Handler, like parser.setErrorHandler(errorHandlerObj).
I need an output like where the entire XML document is read and all the errors have to be reported with the line number.
like example:
<b>Line 6: <promp>
[Error]:Element type "promp" must be declared.
Line 8: </prompt>
[Fatal Error]:The end-tag for element type "promp" must end with a '>' delimiter.
who can i achieve this.</b>
what happens with the present code is that it throws the first error it encountered and comes out.
how can i solve this problem

You can try to set the following feature to 'true' for your SAXParser:
http://apache.org/xml/features/continue-after-fatal-error
At least Xerces supports this feature.

How to skip dtd validation when using SaxParser?

Hi all,
I'm using xerces.jar from apache to parse xml documents. I have a problem when the
dtd file is not accesible. I get a HttpUrlConnection exception. I want to skip this action or to ignore this problem and go further. I thought that the following line of code will solve the problem but it doesn't
saxParserFactory.setValidating(false);
Does anyone know how to do it?
Thanks,
Sergiu

hi,
Thanks for the hint, my problem is that I don't want to load the file in memory.
Therefore I use SaxParser.
Both solutions provided in that forum require loading on the whole file in memory
Any other ideas?
Thnaks,
Sergiu

I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
     Dim r as New ReportDocument
     'v is the name of the Crystal ActiveX Report Viewer Control
     r.Load("C:\Report1.rtp")
     v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
Chi

VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ

Problem in using FM SELECT_TEXT

Hi friends,
I have a problem in using fm SELECT_TEXT.
Here I want to fetch Material PO text in Material master to my report.
I just dont know in which field of table "it_thead" the actual text is available.\
I tried debugging the program but was not successful.
I have also tried using READ_TEXT but it gives an error if no Text exists.
    CALL FUNCTION 'SELECT_TEXT'
      EXPORTING
        client     = sy-mandt
        object     = 'MATERIAL'
        name       = wrk_matnr
        id         = 'BEST'
        language   = sy-langu
      TABLES
        selections = it_thead.
How do i print the actual MAterial PO text in IT_THEAD ?
hope u understand the question...please do let me know if any details are required from myside..

Hi,
My mistake.
Check below sample code.
PARAMETERS: po_matnr TYPE mara-matnr.
DATA: i_lines TYPE STANDARD TABLE OF tline,
      wa_lines TYPE tline,
      l_matnr TYPE thead-tdname.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT         = po_matnr
IMPORTING
   OUTPUT        = po_matnr
MOVE po_matnr TO l_matnr.
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    ID                            = 'BEST'
    LANGUAGE                      = sy-langu
    NAME                          = l_matnr              "Pass material with leading zeros
    OBJECT                        = 'MATERIAL'
*   ARCHIVE_HANDLE                = 0
*   LOCAL_CAT                     = ' '
* IMPORTING
*   HEADER                        =
TABLES
    LINES                         = i_lines
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT i_lines INTO wa_lines.
WRITE: /1 wa_lines-tdline.
ENDLOOP.
Just execute this code by inputting ur material number.
If the text doesnot exist the error u r getting because of not commenting the MESSAGE statement after FM call. Try in the way i told above.
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Feb 28, 2009 4:36 PM

I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage - I´d like to add an EMail account on top to my mobile number. My password will not be accepted!!!???

I can use my appleID without any problems for using to download new apps in the app-store or Itunes - Problem: I can´t use my ID at facetime and Imessage -
I´d like to add an EMail account on top to my mobile number to use more this services. My password will not be accepted!!!??? I try it and i try it and i try ist, throughout the same problem. Whats on? The user help desk said, i´ve to reset and use the WLAN key new as well as possible - no way!

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

Guys i have a problem, I used to download apps from one of my friends apple id, now i created my new account, but when i was about to update my apps its asks for my friends id and password. now how could i update my old apps from my new apple id?

The_Tonmoy wrote:
I have no communication with my that friend :/ So it means i need to delete those apps? There's no other solution to update those apps?
No. purchases are forever tied to the apple ID used to buy them. Delete them and buy your own copies.

Problems in using database link

Hi all,
I have problems in using the following created database link:
Name: fzanalyze
User: fzanalyze
PWD: xxx
Host: fz.domain.com
I get the following error message, if I try to start this select:
select * from tab@fzanalyze;
FEHLER in Zeile 1:
ORA-12154: TNS:Couldn't resolve service name
The problem, the TNS is correct, because I copied the hoststring from the tnsnames.ora. Also I can connect to the database by using the given hostname as follows:
connect fzanalyze/[email protected]
connected
What could be the problem, the I get the tns-Error, although I can connect normal to the database??
Thanks for helping
Dana

Dana,
Unlike Kamal, I don't use SQLNET anymore (isn't it obsolete from 8i+?), so I don't have any sqlnet.ora on my client or server.
I'm not really a sysop, so no clever thoughts behind the following ideas, I just use these for development purposes at home:
IP range at home = 192.168.x.x segment (another router server connects to the internet)
Oracle server computer name = dbserver.seinpost.nl (local address = 192.168.1.110)
instance entry in $TNS_ADMIN/listener.ora @ server:
    (SID_DESC =
      (GLOBAL_DBNAME = inst04.seinpost.nl)
      (ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
      (SID_NAME = inst04)
    )instance entry in $TNS_ADMIN/tnsnames.ora @ server:
INST04.SEINPOST.NL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = dbserver.seinpost.nl)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = inst04.seinpost.nl)
)instance entry in tnsnames.ora @ client:
INST04 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS =
        (PROTOCOL = TCP)
          (HOST = 192.168.1.110)
            (PORT = 1521)
    (CONNECT_DATA =
      (SERVICE_NAME = inst04.seinpost.nl)
)So again, no sqlnet.ora and as you can see only on my client I use local IP addresses to prevent my client for searching the internet for the non-existing dbserver.seinpost.nl address
Hope this helps,
Michiel

Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
Sequence of events:
The main error message is always:
An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
Yesterday, I opened Disk Utility and verified the disk. Got this error:
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
Starting manual backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Found 145601 files (11.88 GB) needing backup
16.1 GB required (including padding), 620.77 GB available
Copied Zero KB of 11.88 GB, 0 of 145601 items
Copied 0 files (Zero KB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
Ejected Time Machine network volume.
Starting automatic backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
Does anyone know what the problem is here and what I should do?
Thanks,
Tery

You have repaired your boot drive (which is good) but have you repaired your time machine drive? I don't own a Time Capsule so I don't know if disk utility can operate on it. If it can, you should repair it as well. You may need to erase it and start a new backup. That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

Problem in using SAXParser

Similar Messages

Maybe you are looking for