Problem in using the enhancement SAPLV01Z for batch no assignment

Hi,
i am using the enhancement SAPLV01Z for using the user defined batch number.
In which i am allowing the system to generate the internal batch number if it is newly created batch for that particular material,site and MRP combination.For this i am using the function module EXIT_SAPLV01Z_001 and if the batch is already available in ztable suppress the internal batch number generation.
And by using the function module exit EXIT_SAPLV01Z_002 i am copying the already available batch and passing to the variable new_charge in that function module.
every thing is OK. But the prob is system checking the availability of the batch for combination of materila and site in batch master table MCHA and throwing an error saying that no batch is found,enter batch.
Now i want to skip the checking of MCHA table if it is already there in my ztable.For that i am implemented the OSS Note 1035372 but it is not working.
And one variable call_vb_create i need to pass X for that i need access key.
Can any body have solution with out using the access key..
Thanks and regards
anil

Sorry I hadn't seen this question.
I got the same issue today and used EXIT_SAPMM07M_010. It works fine.
This user exit fix the issue

Similar Messages

Problem in using the enhancement SAPLV01Z for batch no assignement in MIGO

Hi,
i am using the enhancement SAPLV01Z for using the user defined batch number.
In which i am allowing the system to generate the internal batch number if it is newly created batch for that particular material,site and MRP combination.For this i am using the function module EXIT_SAPLV01Z_001 and if the batch is already available in ztable suppress the internal batch number generation.
And by using the function module exit EXIT_SAPLV01Z_002 i am copying the already available batch and passing to the variable new_charge in that function module.
every thing is OK. But the prob is system checking the availability of the batch for combination of materila and site in batch master table MCHA and throwing an error saying that no batch is found,enter batch.
Now i want to skip the checking of MCHA table if it is already there in my ztable.For that i am implemented the OSS Note 1035372 but it is not working.
And one variable call_vb_create i need to pass X for that i need access key.
Can any body have solution with out using the access key..
Thanks and regards
anil

Sorry I hadn't seen this question.
I got the same issue today and used EXIT_SAPMM07M_010. It works fine.
This user exit fix the issue

What are the best practices for using the enhancement framework?

Hello enhancement framework experts,
Recently, my company upgraded to SAP NW 7.1 EhP6. This presents us with the capability to use the enhancement framework.
A couple of senior programmers were asked to deliver a guideline for use of the framework. They published the following statement:
"SAP does not guarantee the validity of the enhancement points in future releases/versions. As a result, any implemented enhancement points may require significant work during upgrades. So, enhancement points should essentially be used as an alternative to core modifications, which is a rare scenario.".
I am looking for confirmation or contradiction to the statement "SAP does not guarantee the validity of enhancement points in future releases/versions..." . Is this a true statement for both implicit and explicit enhancement points?
Is the impact of activated explicit and implicit enhancements much greater to an SAP upgrade than BAdi's and user exits?
Is there any SAP published guidelines/best practices for use of the enhancement framework?
Thank you,
Kimberly
Edited by: Kimberly Carmack on Aug 11, 2011 5:31 PM

Found an article that answers this question quite well:
[How to Get the Most From the Enhancement and Switch Framework as a Customer or Partner - Tips from the Experts|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0f0373e-a915-2e10-6e88-d4de0c725ab3]
Thank you Thomas Weiss!

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible?

I want to perform bidirectional i/o using a pci-6534.The problem is that i need to use the same lines for i/p and o/p. is that possible? And if it is how an i doing this?

Hi I Pant,
The idea that crossed my mind was to tie each of the lines coming from/going to "your device" to two of the DIO lines. Configure one these two ports as input, the other as output.
When you want to read the state of the line, read from the line configured as input. Similarly, use the other port when it is time to write.
Provided "your device" uses tri-state drivers/receivers, or can be used in a "wired-OR" configuration, this may work.
What is "your device"?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Ipad 3 charger problem im using the original charger and it say is not apropiet for device.this problem star today. :/

ipad 3 charger problem im using the original charger and it say is not apropiet for device.this problem star today. :/

Take it to an Apple Store for evaluation and possible replacement.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

HT5858 When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

When I swipe up from the bottom of the screen to use control center I am not able to use the music controls for music or podcasts and music controls do not work on the lock screen either is anybody else having this problem???????

Not really sur easy you would be having that problem. Mine works. You might try RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). Then try again and see if it makes a difference

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

How to update an existing item in a sharepoint list using the WSS adapter for Biztalk

Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
BizTalk 2013 and SP 2013 ..
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

A ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
Regards.

Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
We have also reproduced the issue on the following stacks:
Oracle SE One 11.2.0.3 (with Spatial enabled)
Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
Microsoft Windows Server 2003R2 Standard x64 Edition
However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
Any help or advice would be much appreciated.
Kindest Regards,
Kevin

In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

Do I use the same password for apple ID and for iCloud?

I am not getting mail on my iphone or my ipad air!
When I put the password for my apple ID into icloud- it keeps reverting to another password. i.e. doesn't hold the apple ID password.
Is this a problem keeping the mail from getting to my phone and ipad?
DO I USE THE SAME PASSWORD FOR APPLE ID AND ICLOUD?
Help. and MERRY CHRISTMAS

What are you trying to do when you say "When I put the password for my apple ID into icloud- it keeps reverting to another password"?
Where are you doing when you try to enter your password?

MDT Console with more then 15 machines, How to use the same drivers for more machines.

Hello,
I'm am looking for a solution to make our MDT design as effective as possible(as small as posible).
The Situation:
The company has more then 15 different computers added to the MDT console for the automated installation of Windows 7. The installations are done in 2 different ways, 1 with a local USB key installation (with the deployment folder on the USB key) and the other
installation is a network USB key installation (with the deployment folder on the server).
The local USB key exists for offices in parts of the world where the internet connection is poor.
The problem:
We have machines which can use the same driver for different kinds of hardware functions (LAN, WLAN, etc..)
If we add a new machine to the MDT and we don't check the box for "Import drivers even if they are duplicates of an existing driver" we will automatic use the driver which already exists in the deployment folder. If say half a year
later we stop using an older machine which "may" have drivers that are being used for other machines and we delete the machine from MDT we should
NOT check the box "Completely delete these items, even if there are copies in other folders". The problem is that this can also lead to a lot of unused drivers in the deployment folder also because we do not know exactly how many
computers are using a certain driver.
At the moment we have another deployment share with for each machine its own drivers installed (so some drivers will be multiple times in the deployment folder) as you can guess this becomes really big.(deployment folder of more then 24 GB). The advantage
of this is that we can delete a machine from the MDT list without having to worry if the drivers for that machine might be used by other machines. It is now just becoming to big in size(GB).
The Question:
Is there not an option within MDT that checks automatically if the drivers connected to a certain machine in MDT are being used by other machines? In this case we would check the box "Completely delete these items, even if there are copies in other folders"
and MDT would not delete the drivers which are still used for the installations of other computers.
Thanks in advance.
Greets,
Arie

Arie,
I think you are over-complicating this. Basically using drivers that already exist is the way to go. Otherwise drivers will be imported a second, third or fourth time. Which also takes up allot of disk space. If you're concerned about driver management,
then I would suggest to drop your concerns, since there is nothing to less you can do about this particular issue. As long as you don't delete the driver that's been imported earlier by another machine there is nothing to worry.
Ask yourself:
- how long am I going to support model x
- how many times do I want to update drivers
With selection profiles you can easily target which content needs to go where (on your USB drive of-course)
I can imagine that managing 25 shares for 25 different models, just because you 'refuse' to have old drivers in your share, or have removed support for some hardware models, isn't really time and energy efficient too.
If you take a look in your deploymentshare\control folders you will see some XML files. These XML files hold all the entries in your deploymentshare. So your drivers.xml and drivergroups.xml (depending on the number of groups you have) are going to be very
big XML files. These XML files are read by MDT to identify the objects in MDT and under which folder the objects are located.
It's not possible to create or have an dependency between driver files and hardware models, other then creating groups under "Out-of-box Drivers" and using selection profiles.
Another suggestion would be to decrease your number of hardware models drastically. On the other hand, having 25 Gb of offline media isn't really a big deal either. Portable and removable media of those sizes (32 and 64 Gb) isn't that expensive as it used
to be 5 years ago.
Don't get me wrong, I perfectly understand your desire to manage this, but MDT doesn't provide any other way, then the things I have pointed out to you here.
Good luck! :)
If this post is helpful please click "Mark for answer", thanks! Kind regards

To use the same code for many movieclips

Dear all.
I am using the flash to build my personal book online. I need zoom many movieclip, my images.
i make the code and function perfectly. But I want to find a way to use the same function for all movieclips and so, mantaining my code clean.
mc_01.addEventListener(MouseEvent.MIDDLE_MOUSE_DOWN, Drag);
mc_01.addEventListener(MouseEvent.MIDDLE_MOUSE_UP, unDrag);
mc_02.addEventListener(MouseEvent.MIDDLE_MOUSE_DOWN, Drag);
mc_02.addEventListener(MouseEvent.MIDDLE_MOUSE_UP, unDrag);
and many others....
function Zoom(e:MouseEvent):void
        mc_01.x = 0; //I try here for this.x but the previews movie, called "Books" is who have changed your x value.
        mc_01.y = 0;
I
EDIT: For untangle, the previews movie is called MyAllPhotos and then, contain all movieclips that are each movie clip is one my images

Hi Mr Kglad.
And when I call a property like a X position I use this["mc_"+padF(i)].x = 0; for substitute the mc_01.x = 0 ?
My problem realy is inside the function. Your loop add an event to my clips and direction to function Drag and UnDrag.
But inside in this functions, I need get some informations for the clip.
Here the code:
function Zoom(e:MouseEvent):void //Sorry, but the correct name my functions is Zoom and not Drag and unDrag
           var mod:Number = 50;
           mc_01.scaleX += e.delta / mod; //in this name mc what I need to use? this, parent? I try and not function.
           mc_01.scaleY += e.delta / mod;

I want to use the same name for my icloud email address as my .mac name

My name for all of my yahoo, gmail, .mac email accounts are al the same. I'd like to use the same name for my icloud account. It tells me that the name is not available but I'm pretty sure no one else would have chosen it. Is the fact that I've used it for my .mac email address somehow blocking it's availability? Please help. Thanks.

There is some confusion in my mind about your post. Let me describe what I think you mean, let us know if I misunderstood...
I'm assuming you already have an Apple ID that you used to define an iCloud account (or an older dot mac account), and the iCloud account has "[email protected]" as its email address. But the Apple ID for this account is not the same as the email address I just listed, perhaps your apple ID is something like "xyz@???.com" and what you want is to use the ID, "mySpecialName@???.com". [the "???" could be mac, icloud, or something else]
If I've got it right so far, then when creating a **new** Apple ID, you must now use @icloud.com. If you are trying to define "[email protected]", then that is the problem - "mySpecialName" is already associated with @icloud.com, because your current @mac.com also has [email protected] as an alias, so that name is no longer available.
Also, you cannot change the current ID from "xyz" to "mySpecialName" on an existing account. So either way, you can't get the ID that you desire.
Let us know if this is not what you mean.

I am trying to retrieve music that I had from an iPad to my iTunes account. I'm using the same computer for synching my iPhone. I'm logged into my iPad account, but can't retrieve music. It only recognizes my iPhone.

I am trying to retrieve music that I had from an iPad to my iTunes account. I'm using the same computer for synching my iPhone. I'm logged into my iPad account, but can't retrieve music. It only recognizes my iPhone. Does anyone know how I can get my music? I know longer own the iPad so I don't have access to it, but I don't think that should be a problem.

So you had music on the iPad that is not in iTunes and you no longer have the iPad. Is that what you are saying? If that is what you are saying, iTunes won't "recognize" anything that was on the iPad, that was not purchased from iTunes. If the music was purchased from iTunes, you should probably be able to download it again for free as long as you are using the same Apple ID that you bought it with. Did you try downloading the music again?
Am I understanding what it is that you want to do? If I am understanding you correctly, you will find this to be useful.
Downloading past purchases from the App Store ... - Support - Apple
I admit that I'm a little confused by your remark about being logged into your iPad account. You should be logged into your iTunes account.

Problem in using the enhancement SAPLV01Z for batch no assignment

Similar Messages

Maybe you are looking for