Problem in Viewer with drill down, Working fine in Plus

Hi,
I am using the cross tab reports with drill down functionality. In the viewer version I am getting the following error:
An error occurred while handling the event. See the application log for more details.
- The numerical value entered was too low.
This one working fine in Plus. .
As for your information this one is working fine in both plus and viewer in development instance and not working in PROD instance.
Please help me out.
thanks.

Update
Hi Guys the report is working fine with cross tab . Its giving the above error when ever I click the Drill to link which takes to the another detail report.
thanks in advance

Similar Messages

Master detail view with drill down

I am trying to develop a simple app for my Ipad. This app is supposed to have a Master/details look and should behave similar to the native Mail app (2x levels of navigation and the last level updates the details view).
My problem is that I am not familiar to Apple IOS development so tend to get stuck all the time so I prefer to follow a tutorial or start with a sample project. I have searched for hours but I always either get a pure navigation drill down project without the details view or a pure master/details project with only a single level of navigation. I tried to take these projects and modify them but my knowledge sadly is very limited and I did not succeed.
So can anybody direct me to a tutorial or a sample project where a Mail like app is being built with more than 1 level of navigation ?

I have a GridBagLayout panel with a jtable and some jtextfield Well, we don't know exactly what constraints you have set up to its hard to say exactly why its happening.
In general, you should create your JTextField using new JTextField(int) and I think the problem will go away.
An easier solution would also be to use different LayoutManagers to achieve the desired layout.

Problem with drill down in time dimension - OBIEE 11G

Hello There,
I have a problem with drill down in time dimension. The hierarchy for time dimension is " Fiscal Year---> Fiscal Quarter---> Month(Name)--->Date". When I select a Time dimension and click results its getting opened in a Pivot table view. The problem here is, when I click the "Total" its getting drilled down to Year ---> Quarter but when I click on "+ sign next to quarter" it should drill down to month for that particular quarter for that particular year but its drilling down to month for that particular quarter for all years.
Any suggestions are much appreciated.
Thanks,
Harry.

1.) Congrats for resurrecting a year-old thread.
2.) Your answer is here: "Check the level key of the quarter level...it should include both quarter and year columns. Since a specific quarter occurs every year, quarter column alone can't be used as the level key."

Transaction Variant related problem in Drill Down working

Dear Sir,
We had a business requirement that in CO02 transaction users should now be allowed to change the Material Component quantity . To address this requirement we had created a Transaction Variant YCO02 and it is working in normal course .
However we face problem in certain Drill-Down working . E.g in Tcode COOIS , when users double click a Production Order it goes to CO02 and user has no authorization for CO02 . Insteat of CO02 , user has authorization for YCO02 .
Pl guide us as how can we resolve this problem.
With Thanks and Rgds
Sonia Agarwal

Dear Mr KrishnamurthyDSS
Thanks for reply .
Pl clarify that can we make Transaction Variant with the same name i.e CO02 .
If Transaction Variant and Original Transaction have the same name (i.e CO02) then how to control the authorization , because we want to give authorization only for Transaction Variant one and not for base transaction .
Kindly help me pl .
Rgds
Sonia Agarwal

Since I downloaded Firefox 4, I can't see attachments in my Yahoo mail. This is not a problem of Yahoo, because with Internet Explorer works fine. What is the problem?

Question
Since I downloaded Firefox 4, I can't see attachments in my Yahoo mail. This is not a problem of Yahoo, because with Internet Explorer works fine. What is the problem?

Ok, now they are showing. I restarted my computer again and they are showing now.

Problem in views with heirarchies

Hi Gurus
I have a problem with the views. I have created a variable on a hierarchy. I ran the query with drill down at level 3 on hierarchy and saved the view. Now second time when I run the same query with drill down at level 2 the view is not getting updated at that level. I am doing any mistake.
How this can be achieved. Could any one help me out.

Hi Gurus
I have a problem with the views. I have created a variable on a hierarchy. I ran the query with drill down at level 3 on hierarchy and saved the view. Now second time when I run the same query with drill down at level 2 the view is not getting updated at that level. I am doing any mistake.
How this can be achieved. Could any one help me out.

BPC 7.5 MS Drill Down works on one dimension in rows but not the other

Good day,
Working in BPC 7.5 MS. I have a piped report with 3 dimensions in rows. Members in the first dimension are hard-coded in the expand range. The second dimension is a combination of SELF and DEP members. The third is set to SELF. In our original AppSet, I can double-click drill down on both the second and third dimensions without issue.
I've re-created this report in a new AppSet (same BPC version). All settings are essentially identical (I've double and triple checked). The drill down works on the second dimension, but not the third. I've run out of places to look to find the problem. Any thoughts?
Thanks in advance.
Kim

It took a while but I finally found some quiet time to re-visit this issue. Thank you for the suggestions above. Ultimately I verified that the hierarchy, member selection and tables were all ok.
My next step was to create a new EVDRE with the same members and slowly factor in the piping, membersets, etc. Drill down worked appropriately. So that told me something else was at work.
Turns out the problem was with one of the 'display' columns to the right of the row key range. These columns use formulas to display a triangle if the member isn't calc, thus giving the end user a visual clue that you can drill down on the member. Long story short, BPC just didn't like that formula. A minor change (along with some conditional formatting to replace the piece of formula that was removed) eliminated the problem. Drill down is now working.

Required funnel with drill down

Experts,
Any sample example of Funnel Chart with drill down option available in Jdev 11.x ?
thnks.

Hi user 552235...
I am not sure if my next post will help you, since I am not working with portal, but I had a problem with drill to link in the same disco version (10.1.2.48.18) and the problem solved after applying patch 5507746 for bug 5475467.
You can read more in metalink with the number I supplied you and try in a test environment of course...
Hope this will help you solving your problem, if it does please update the thread for the rest of our community...
Gidi Halamish

ITunes stops working and closes on opening with Match on, works fine with match off

iTunes stops working and closes upon opening with Match on, works fine with match off

I am having the very same problem with iTunes, I'm running Windows 7 64 bit and started having the problem after the latest update. I just upgraded to the new 5s and was syncing everything to it, so I figured that I would update my itunes software as well. Which I never do after updating one time and had trouble with it on my old laptop and had to rollback to a older version of itunes. I have tried every suggestion that has been posted in the Apple Discussion area and on other websites no luck what so ever. I figured I will wait till Apple comes out with another update and try again. In the post above I am having the exact problem with iTunes. I'd love to know what thef-ing problem is because this is extremely annoying!

Problem in Safari with pull-down menus

My current version of Safari, Version 7.0.3 (9537.75.14), is the buggiest software I have ever had from any Apple--bar none. The problem is dealing with pull-down menus.
The first such problem is in dealing with pull-down menus on websites.   Some of these menus are quite long.   On one particular menu the choice that I routinely need is way down near the bottom.   Routinely Safari stops scrolling before I can get that far down the pull-down menu.
And, always, when Safari stops scrolling on a pull-down menu on a webpage, it refuses to allow me to scroll down again.   To get the webpage's pull-down menu to operate then, I have to re-load the webpage.   That is a big problem for one website that I MUST use. This website has three pull-down menus on one webpage. Because Safari always locks up on the first menu, this crucial website is unusable in Safari. I have to use Firefox for this absolutely essential website.
And Safari has trouble with one of its own pull-down menus. This is the PDF menu in the printer window. Not always, but too often, when I pull down that menu to print to PDF, Safari crashes.   I have to wait for a dialog box to come up and click "send report to Apple" in order to get Safari to reopen.   I don't know how many such reports I have sent to Apple. I get the feeling that Apple is not listening.
Does anyone have any suggestions for these problems? TIA

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Exporting a Report to a pdf file with drill down!

Hi,
I would like to export a Report to a pdf file.
My Report includes drill down options. I require the exported pdf with drill down options.
(Similar to Navigation options in a PDF file).
I hope this makes sense.
Please provide a better solution for me.
If am not wrong, this facility is not available with Crystal Reports!!!
Thanks,
Ramesh.

Hi Ramesh
You can download the trial versions of the Crystal Report from the following link:
https://websmp202.sap-ag.de/support (Please copy the link and paste it to your web browser).
You can get the license by putting a request in the follwoing link:
https://websmp202.sap-ag.de/support(Click on Request License key under Service Corner).
Hope it helps.
Regards
Sourashree Ghosh

Calendar with Drill Down Report

Hello,
Everybody.
I am new to Application Express.
Please any one tell me step by step how to make calendar with drill down report.
Waiting for valuable reply.
Thanks
Rahul

Not sure if this is what you wanted, but I have links on a calendar, and when you click them, it branches to another page with details about the event.
To do this, create a calendar region. The SQL statement should have at least 2 columns: The date of the "event", and the text to display as a link. You should also choose a primary key that you want to pass to the drill down report when the user clicks. Something like this:
select hiredate date_scheduled,
          ename display_column,
          empno
   from empIn the calendar attributes of that region, there is a place to designate which column is the date, and which should be displayed. Go down a little further and set the column link. Put the page you want to show the drilldown report on, and set any variables you need to.
Hopefully that helped. Its pretty simple once you play around with it - start simple and then once you get the hang of it, make it more complex.

Suppressing sub-section with drill down OK

This may be an easy one that I just cannot figure out (I hope...).
I have created two details sections - details A and details B. I would like to suppress details section B while still allowing for drill down capabilities. However, that option is not available. I can either suppress the entire details section (A and B) with drill down capabilities or suppress either A OR B with no drill down capabilities.
Any and all help would be truly appreciated!!

I can only think of using an on demand subreport which sits in Details b. but the row and the SR lable will be visible for all records.
Ian

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do?

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do? It does not allow me to add a colored canvas, only a blank canvas.

Perhaps some of the tiffs are already layers.
In other words, since jpegs don't support layers, they all ways open with one locked background layer, but the tiff format does
support layers so the tiffs don't have to have a locked background layer and can already be a regular layer that supports transparency.
For the tiffs you could add a new color fill layer below and use the color you want the enlarged canvas to be.
On pse 10 look at the bottom of the layers panel for the new adjustment of fill layer icon

OBIEE-- Google Maps With Drill Down Facility

Hi All,
I want to create a map chart ie., google maps in OBIEE with drill down facility.
This is my Hierarchy -> From country to state to city .
I have this data in my table in the database as columns.
I know to create google map but dont know how to include hierarchy, please let me know if this can be done.
Thanks in Advance

Firstly:
http://catb.org/~esr/faqs/smart-questions.html#before
Then look at:
http://obiee101.blogspot.com/2009/03/obiee-google-maps-multiple-addresses.html
http://www.artofbi.com/index.php/2009/07/obiee-and-google-maps-integration/

Problem in Viewer with drill down, Working fine in Plus

Similar Messages

Maybe you are looking for