Problem in viewing long text in QP03

Hi
Facing a strange problem while trying to upload long text in QP01 using SAVE_TEXT.
the long text is getting uploaded properly
an entry is inserted in STXH with object, id, name, etc.
but when i try to view the long text in QP03 txn. (Display), there is no icon for view long text
when i go back to QP02 in change mode, the icon for long text (Create long text without horizontal lines embedded on it) exists, after clicking it am able to see the long text and if i am saving the plan while leaving the txn, then again if i see the same plan in display mode (QP03), i am able to see the long text icon and the long text by clicking it..if and only if i view manually every long text in QP02 and save while coming out the txn., I am able to see the long text icon and the long text in QP03.
Is it any setting problem or where am i wrong?
Sathish. R

hi
r u sure? bcoz the program was running fine with long text viewable in QP03 all this time
Sathish. R
Message was edited by:
Sathish

Similar Messages

Problem in Saving long texts from IC Webclient

Hi,
I have a little problem with BP long text transfert.
In IC Webclient, I identify a account and I create a long text (for exemple a Accounting Note).
I can find this text in CRM (t-code BP->long text) but, it is not transfert to ECC (XD03->Extra->text).
If I create a accounting note directly in CRM, it is transfert to ECC !!
The transaction PITX is customized in ECC.
I work with CRM5.0 and ECC6.
What I missed ?
Gaétan

Hi Gaétan,
Maybe the BDOC BUPA_MAIN responsible to export the change to ECC is not being created when you make the change in IC Webclient.
Can you confirm it in SMW01? Try to make a change in a partner long text in IC webclient, and check if the bdoc was sent to R3.
Then try it in BP t-code, and check it again.
If this is the problem, maybe you should contact OSS suport.
Kind regards,
Garcia

Problem in downloading long text

Hi Experts,
I am facing problem while downloading long text.
previously it was working 5ne. now it is giving the error meaasge
ID ST Language En not found
is there any settings to do.
Thanks & Regards
Sangareddy

In a SAPscript you do not need to use ABAP code to retrieve long text - Just use the INCLUDE command in SAPSCRIPT - see help for details
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p]
this puts the complete long text in and formats it for the window
Long text problem in sap script
Reward points..

Problem in uploading long text in service master through AC02

hi experts,
while iam recording the LSMW through T Code AC02 the system is not linking to the longtext in service master. Kindly guide me in this regard to upload service master with service long text together

I have the same problem where the long text is not being updated through a AC02 BDC session. Did you find a solution to the problem yet?
Thanks
Johan

MM02: Problem in updating Long Text

Hi All,
My requirement is to do MM02 Conversion. I have to Update 14 fields in the transaction.I got a Problem with my LONG TEXT Field.
Requirement for updating is whenever a double quotes comes in the place of LONG TEXT in the input file, i have to empty the LONG TEXT in the transaction.
For modifying the already existing Long Text, its working perfectly. But problem is arising only when i want to empty the LONG TEXT field.
What i did was,    IF zbasic-matnr_long_text = ' "" '.
                           bmmh7-tdline = ' '.
Also i have passed Text ID, Text Langauge.
So please Help me with this Problem
Message was edited by:
        karthikeyan Thangavel

Hi Sathish,
If i use Fm Delete_Text, as soon as it encounters the FM it will delete the LONG Text.
Since Im using LSMW, everything should happen after i run the step 'Start Direct Input Program'.
Please just consider, suppose there is a Transaction Error in my LSMW. So according to this situation no transaction should happen i mean LONG TEXT should not get deleted.
But Since it has enountered the FM, Long text must get deleted.
Please correct me if anything is wrong in my Logic.
Also tell me what i should do if my Logic is correct.

Problem in Getting Long Text After uploading LT using CREATE_TEXT in CORS

Hi Gurus,
i am uploading long text for Reason for cancellation in CORS Transaction through CREATE_TEXT.
after uploading this text by using this FM CREATE_TEXT i am seeing the long text what ever i uploaded through CREATE_TEXT , i am unable to see first 40 characters of that long text.
if anybody faced this problem earlier please guide me to resolve this problem.
Thanks & Regards
Venkata Ramesh J

Hi,
can you please check this link
Replacing the text created in create_text
Thanks
durga.K

AC02 - Problem in uploading Long text data

Hi All,
I record a BDC for AC02 tcode and i am able to upload all the data in AC02 tcode except long text. How can I upload this, kindly suggest.
Thanks and Regards,
Rajesh Vasudeva

Hi,
Check the below threads.It could be helpful to you.
LONGTEXT: MATERIAL - PRUE
problem with long text
Cheers,
Hakim

Problem in getting long text in Cash receipt.

Hi all,
I want long text in my form print but as a programming i am not getting long text in description Field I am getting short text. So can you please kindly tell me when we entered long text in transaction FBCJ this long text save in which table. And how can i fetch this data in my smartforms.
Thanks in Advance.

Hi Keyur,
when you see the detail text in the transaction, use menu goto -> header. Here you see the details to use for an include staement in sapscript. Note that the text name may be a concateneation of client and document number. Prepare the details in print program, fill in variables to be used in sapscript.
Hope these details are enough.
Regards,
Clemens

Problem loading hierarchy long text. Item text only displays 45 characters

Hi,
When loading the Financial Statement hierarchy from ECC to BI I am only getting a 45 character long text for the nodes. This text seems to correspond to the "Item" text seen in transaction fse3 in ECC. However, the text that I need to have is the (concatenated) long text enterer in the multiple fields under either "End of Group" or "Start of Group" (under Item: Display Texts in fse3).
Does anyone know if it is possible to extract this information and how to go about when doing this?
Points will be rewarded for help.
Regards
Nils

Hello Vânia,
>> fac586, Thank you very much for your help ….
Just so you know, fac586 is called Paul :).
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Problem in formatting long text

Hi Experts,
I am printing quality notification using adobe forms.
The problem is that if there is any <TAB> in the longtext , then it is being printed as ',,'.
Ex. Test 1 is being printed as test,,1.
I am using READ_TEXT to read the text and in that itself I am getting the above format of ',,'.
Please suggest a way it could be printed as Test 1.
Many Thanks!
Parul.

Hi Parul,
In the internal sapscript format the tab is represented as a ',,'. You should use function module CONVERT_ITF_TO_ASCII to convert the data returned by function READ_TEXT.
Reards,
Aidan

Problem in saving long text data from custom

Hi Expert,
I am working on a screen exit in QM01. I have created a editor box(like the description box under Description tab in QM01) using class cl_gui_custom_container and cl_gui_textedit. I am able to create and display the text I type in the box alongwith other standard changes but if I try to change and save the text only in the custom text box, it is not getting saved. I debugged and found out that the standard does not recognize any change in the custom controller box.
Please suggest.
Thanks in advance,
Sangeeta.
Edited by: Sangeeta on Oct 1, 2009 7:01 AM

Solved on my own. Consider all the scenarios by Using read_text in PBO and edit_text FM in PAI. At last save_text in the PAI.

Problem in Reading Material Long text in Sapscript

Dear firends,
I have written following code in sapscrit to fetch the longtext of the material
INCLUDE &MARA-MATNR(K)& OBJECT MATERIAL ID GURN LANGUAGE &NAST-SPRAS&
Test name - material no(MARA-MATNR)
object - MATERIAL
text id - GURN
LANGUAGE - EN
but i am not table read the longtext by using above code, when i see in debug mode ,i am getting warning message
"data is not available for materil 0000013,GURN,MATERIAL" like that.
i don't find any problem in code , long text also availble for material 0000013.
i don't where is the problem , please give me solve this issue.
Regards,
D.prabhu

Hi
You have to fetch this Long text of this Material using READ_TEXT fun module by passing the 4 parameters as mentioned by you by writing some code in the program or by writing the external subroutine using PERFORM statement
Only Application HEADER and ITEM texts can be included in script using the INCLUDE command
So write the code for the Read _Text fun module and fetch it into Internal table lines and pass/print those to script
pass the same 4 parameters
Test name - material no(MARA-MATNR)
object - MATERIAL
text id - GURN
LANGUAGE - EN
see the sample code
data:begin of it_stxh occurs 0,
        tdobject type tdobject,
        tdname type tdobname,
        tdid type tdid,
        tdspras type spras,
      end of it_stxh.
types:begin of ty_lines.
        include structure tline.
types:end of ty_lines.
data:it_lines type standard table of ty_lines with header line.
it_stxh-tdid = 'GRUN'.
it_stxh-tdspras = 'E'.
it_stxh-tdobject = itab-matnr.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT                        = SY-MANDT
    ID                            = it_stxh-tdid
    LANGUAGE                      = it_stxh-tdspras
    NAME                          = it_stxh-tdname
    OBJECT                        = it_stxh-tdobject
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
TABLES
    LINES                         = it_lines
EXCEPTIONS
ID                            = 1
LANGUAGE                      = 2
NAME                          = 3
NOT_FOUND                     = 4
OBJECT                        = 5
REFERENCE_CHECK               = 6
WRONG_ACCESS_TO_ARCHIVE       = 7
OTHERS                        = 8
IF SY-SUBRC eq 0.
loop at it_lines.
< Print these lines in script by passing to script>
endloop.
ENDIF.
Regards
Anji

Problem in loading the long text in bdc.

Hai Friends,
              I am uploading the material master using bdc, Here i need to upload the long text field. so am using the separate report for upload the long text field using the create_text function module. but the problem is the long text field only accepting 132 charactors. but i need to upload the 500 charactors. what i want to do now ?
Regards ,
Sathis Kumar R

Hi Sathis,
What u do is that while recording the text part in bdc , click on the first delete button, and then create button and after that double click on the editor or click on the text-editor change button, a window will get opened , then click go-to menu -> change editor.
there u can use loop the text table and wirte it according .
eg
PERFORM bdc_dynpro      USING 'SAPMV45A' '4002'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=TP_DELETE'.            "first delete
PERFORM bdc_dynpro      USING 'SAPMV45A' '4002'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=TP_CREATE'.             " then create
PERFORM bdc_field       USING 'LV70T-SPRAS'
                                sy-langu.
PERFORM bdc_dynpro      USING 'SAPMV45A' '4002'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=TP_DETAIL'.             "if not double click then click on change button after the delete button and then click on the change-editor menu .
PERFORM bdc_field       USING 'LV70T-SPRAS'
                                sy-langu.
PERFORM bdc_dynpro      USING 'SAPLSTXX' '1100'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RSTXT-TXLINE(02)'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=TXVB'.
PERFORM bdc_field       USING 'RSTXT-TXPARGRAPH(02)'
PERFORM bdc_field       USING 'RSTXT-TXPARGRAPH(03)'
PERFORM bdc_field       USING 'RSTXT-TXLINE(02)'
                                wa_itab-htext1.
PERFORM bdc_field       USING 'RSTXT-TXLINE(03)'
                                wa_itab-htext2.
PERFORM bdc_dynpro      USING 'SAPLSTXX' '1100'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RSTXT-TXLINE(02)'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=TXBA'.
PERFORM bdc_dynpro      USING 'SAPMV45A' '4002'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/EBACK'.
regards,
Santosh Thorat

Long text doesn't fit the window exactly

Hi friends,
in PO smartforms i have included the header text of PO.
the problem is the long text doesn't fit to the window exactly i.e.,
when we enter the text in PO in the header a line can contain only 60 characters approximately where as in my smartforms it can contain more than that.
so in the display of smart form i get lot of space in the right side and i get the remaining part of text in the next line.
regards,
Saravan raj

hi,
what u have told is correct but we can't expect the end user to do it each time when they paste the long text.
is there any option to bring it by default.
regards,
saravan raj

Re:Uploading Long text of 500 characters through LSMW

Can any1 help me out in uploading long text of 500 characters thru LSMW...Please reply ASAP..We have used Direct Input method 0004...We have a structure for long text ,but still unable to upload.

I have the same problem where the long text is not being updated through a AC02 BDC session. Did you find a solution to the problem yet?
Thanks
Johan

Problem in viewing long text in QP03

Similar Messages

Maybe you are looking for