Problem in Virtual Box
I have a problem in Virtual Box
Which I can not use any Virtual System
Set everything you asked the wrong window
But stayed the same problem
This is a picture of the problem
http://im32.gulfup.com/HdUpE.png
Last edited by Haithem (2013-06-12 17:24:42)
karol wrote:
jasonwryan wrote:Don't bump your posts: https://wiki.archlinux.org/index.php/Fo … te#Bumping
If you're refering to 'Please', he may have meant 'Here you go' and if so, it was meant as a response to ewaller's post about the thumbnail.
karol, perhaps you should read the link I posted.
Not an installation issue: moving to NC...
Similar Messages
-
Parameter is incorrect compile problem in virtual box
Hi, since Linux support for flash builder (flex builder at the time) was dropped longer ago, we Linux users are forced to use virtualbox to run flash builder. Latest virtualbox 4.1 has an issue to build flex projects.
I spent hours yestarday to try to solve this and finally only working solution I found was to downgrade back virtualbox to version 4.0
Stuff I tried after upgrading to VB4.1
1. building existing flex project in existing installation of flash builder 4.5
2. using 4.5.0 sdk and 4.5.1 SDK to compile.
3. trying to set lower flash target, and changing other deployment params
4. getting rid or any aditional compiler parameters
5. setting up same project again using same fodler with files
6. setting up project from scratch with project source files got fresh from repo
7. trying with new flash builder installation 4.6 trial with 4.6 flex sdk
none of these helped and all resulted in compilation error
Parameter is incorrect, flex problem, location "Unknown".
As this thread explaines http://forums.adobe.com/thread/982266
there may be other solution which is to setup new windows virtual machine and install flex there.
but for me this is just another bad solution as mine so far (not upgrading VB)
After downgrading back to VB 4.0 all even existing projects in both 4.5 and 4.6 built with no problems.
Just to complete I'm using Windows 7 as OS in VM.
If anyone finds acceptable solution please share..
thanks.So for those interested, I solved this problem by creating another blank Windows VM, re-installing Flash Builder and importing my project again.
It seems that Adobe Flash Builder has built in something obscure that does not like you migrating a VM to another host. I did un-register and re-register my product between the VM's by the way - that also did not work. -
[SOLVED] Guest Arch in Virtual Box Internet Problems
I have installed Arch a few times already in virtual machines on Virtual Box and each time it is unable to configure the internet connection properly. Having gone through the beginner wiki-pages on starting with Arch, I have tried "ping -c 3 www.google.com" and get "ping: unknown host www.google.com". However, IP addresses usually work with 0% packet loss.
I then followed the "hwdetect" instruction and that yielded "-bash: hwdetect: command not found". The command "modprobe pcnet32" does not yield an error and returns nothing.
I have also tried other methods
http://eligere.wordpress.com/2008/03/05 … i-problem/
http://bbs.archlinux.org/viewtopic.php?id=55811.
Thanks.
Last edited by zeug (2009-05-08 23:03:56)Wikimig wrote:
Hi,
Pretty much the same here
That is strange but adding "nameserver 192.168.0.1" to /etc/resolv.conf enables me to access the internet. 192.168.0.1 is of course the IP of the host computer's vitual card but what is strange is: I need to use dhcpcd from guest to be given an IP that isn't even in the same range as 192.168.0.1 (for instance 10.0.2.15)!!
So to basically, host PC has that virtual ethernet card with static IP 192.168.0.1 and internet connection shared (don't know if this is compulsory though) and guest uses dhcp, is given 10.0.2.15 (don't ask me where it gets it from because I disabled it on VirtualBox). Then I just have to add "nameserver 192.168.0.1" to resolv.conf and I'm good... till dhcpcd rewrites the resolv.conf. How could we set dhcp to use a particular DNS?
As you can see, I am not a DNS expert. Using static IPs for both would be great but it doesn't work
Does it help?
The 10.x.x.x.x address range is assigned because you are most probably using NAT networking on the Virtual Box configuration.
Try with 'Bridged'.
If all goes well you shouldn't need to fiddle with /etc/resolv.conf.
Still, if you still need to change /etc/resolv.conf, put your changes in a file called /etc/resolv.conf.head which will survive
the changes that sometimes DHCP does on /etc/resolv.conf.
Mektub -
Problem installing ubuntu in virtual box
Hello lately i tried installing ubuntu LTS in virtual box 3.2 using an ISO image downloaded in hard disk but every time i try to run it, it says upgrade it to new ubuntu 10.04 LTS though this is the same one i installed. The softwares which i downloaded earlier are all gone. What might be the reason for this please do let me know.........I was willing to try ubuntu but this is giving me a headache now.
Thanks for any help afforded
Regards
SanjayaThanks for your reply,
Yeah i too guessed that the problem might be that it is booting from the iso image in the hard disk so i just moved it to another lokation as i did not know how to unmount the image and now after i have done so the problem of self rebooting is gone atleast for now. Sorry i could not make it much clear was to what the problem was, thanks anyways.
Regards
Sanjaya -
This is what I did:
1) downloaded and installed virtual box 4.3.20
2) copied
curl -s https://raw.githubusercontent.com/xdissent/ievms/master/ievms.sh | IEVMS_VERSIONS="11" bash
in the Terminal (for IE 11 only). I got this from the link: Internet Explorer for Mac the Easy Way: Run IE 7, IE8, & IE9 Free in a Virtual Machine
3) that is where things went wrong, see attached image for the error I get (after a long time) in the Terminal
Tried it twice but every time the same problem.. I hope someone can help me!The error means that your download session was interrupted. There could be a problem with your Internet connection or a problem with the remote server providing the download. If you otherwise have no trouble with Internet, I suspect the later.
But why would you want to bother downloading someone's virtual machine to run MS Internet Explorer? Not only is there a real security risk since you don't know what the VM or installation script is doing, but if the VM is running MS Windows, then the person providing the software is breaching software distribution and copyrights laws, and so will you, using the software.
Btw, have you read any of the comments? Do you really want to download 20GB? (nonsense)
If you need IE and VirtualBox, simply create a new VM and install MS Windows using a regular copy and enter your license code. There is also no need to install different versions of IE, since IE can be configured to run as a prior version.
However, there is no need to install and run MS Windows to run IE. There are products that provide free Windows API to let you run PC applications as they were Mac applications without installing Windows, e.g. Wineskin, Wine Bottler, or commercial solutions, such as Crossover.
See http://www.wikihow.com/Install-Internet-Explorer-on-Mac-Using-WineBottler -
Virtual Box Guest problems with libgl
Hi.
I had a Virtual Box (under Windows 7 64 bits) running for a few days with no problems.
It run updated Arch, with KDE.
Yesterday the problems started, after doing "pacman -Syu", something has changed...
From now on, when I start X, I only get a black screen.
I've traced the problem to the libgl library - if it's not installed, X starts correctly. If it's there - X fails.
In order to verify my assumption, I've installed a new Virtual Machine according to the "unofficial beginner's guide", installed X, tested it, installed XFCE4, tested it - so far all OK.
Then, I've installed audacity (it also uses libgl, and I wanted to avoid KDE to be sure it's not with them).
And now - there is this failure in the Xorg.0.log:
[ 6552.010] (EE) AIGLX error: vboxvideo does not export required DRI extension
(I wanted to attach the 2 log files, isn't it possible??)
Thanks,
ZvikaThis is a bug in virtualbox. Somebody said it happened upon upgrading nvidia drivers on the host machine: https://www.virtualbox.org/ticket/4789
-
Virtual Box 4.0.8 Windows Host - Guest Additions problem
Hi,
I have installed Virtual Box 4.0.8 with host O/S Windows 7 Home Premium 64 bit Processor AMD Phenom II x6 and enabled the VT.
I installed OEL 5.6 and 6.1 guests (both x86_64 version).
But when I installed Guest Additions, nothing happened and only showing maximum resolution *1024x768.*
I never had this problem before with my older machine and older version of Virtual Box.
is this known issues? is this cause by the VT or conflict with the graphic card?
Any advice appreciated
thanks
LieThis would be better addressed on the VirtualBox forum. see https://www.virtualbox.org/
-
Sun Virtual Box & Toshiba Satellite L10 - product recovery settings problem
Hi-
I had a problem a while back with my Satellite L10 and was unable to get full recovery settings after installing Sun Virtual Box and ignoring Microsoft warnings.
I suspect this has now cloned my disk. Something is very very wrong. I am using Win 7 beta in the interim but would like my XP back.
My notes to Sun Microsystems are here:
[http://forums.virtualbox.org/viewtopic.php?f=6&t=15106 ]
Has anyone had the same experience or what does Toshiba recommend?
Thanks,
TimHi -
Thanks very much for the advice.
It's really strange as the system runs through Win 98 options on booting the product recovery dvd but then gets you to a full & perfect toshiba L10 XP.
I reinstalled XP and went through the process you mentioned above (F8 etc) after installing - at least my safe boot mode options etc. are there.
My guess is that either the disk itself picked up on the cloning or something outside the HDD has been cloned or produced an 'image' of the previous HDD.
If I want to get a new product recovery dvd (as a next step in my investigation) can I download from the net or do I have to order from Toshiba (is this a good course of action?...).
My system can only burn cd's, but I could get someone else to burn a dvd for me if this is possible.
Thanks....
Message was edited by: tigertim71 -
[SOLVED] Arch Linux Guest Virtual Box OSE problem
So I am installing my Arch Linux as a Guest in my Ubuntu partition, through Virtual Box OSE (3.2.8). I followed the wiki ( https://wiki.archlinux.org/index.php/Ar … lBox_Guest ) but still have an issue:
sudo pacman -S kernel26-headers xorg gcc make
sudo mount /dev/cdrom /mnt/cdrom
sudo /mnt/cdrom/VBoxLinuxAdditions-x86.run
But It fails on Shared folders, and cannot recognize X:
:: Building the VirtualBox Guest Additions Kernel Modules [BUSY]
:: Building the main Guest Additions module [DONE]
:: Building the shared folder support module [FAIL]
(Look at /var/log/vboxadd-install.log to find otu what went wrong)
:: Warning: Unknown version of the X Window System installed. Not installing X Window System drivers.
:: Installing graphics libraries and desktop services components [Done]
/var/log/vboxadd-install.log states:
/tmp/vbox.0/vfsmod.c:406:9: error: unknown field 'clear_inode' specified in initalizer
/tmp/vbox.0/vfsmod.c:406:9 warning: initalization from incompatible pointer type.
Which is strange, because as far as I know, clear_inode is part of the linux headers.
Any idea why this is happening? Do I just need to update VirtualBox to a newer version?
Last edited by gralamin (2011-03-11 18:22:14)Updating Virtualbox fixed the issue.
-
Windows 7 can not joinng to domain but windows Xp does in Virtual Box Manager
Dear all,
I need your support and thanks in advance.
I have installed Windows 7 and Windows 2008 server in a Virtual Box. Windows 2008 server is my Domain Controller and DNS is configured. Please find my configuration below.
Domain Controller FQDN name - bbi.in
IP addrees - 192.168.10.14
subnet mask- 255.255.255.0
gateway- 192.168.10.254
Preferred Dns - 192.168.10.14
Windows 7 having IP address 192.168.10.2
Ping connectivity is working from both end
My Problem is my windows 7 machine is not joining to domain.
while doing Nslookup command from windows 7 command prompt I am getting default server and Ip address of the domain controller.
I have been trying a lot and did lots of trouble shooting but can not get any solution plz.... helpOn Fri, 14 Nov 2014 17:55:41 +0000, biswajeetpattnaik wrote:
When I join the domain I use bbi and and I get authentication asking for user name and password.
Please find the attached error screen shot<https://social.technet.microsoft.com/Forums/getfile/567235><https://social.technet.microsoft.com/Forums/getfile/567236>
This forum is for issues relating to Windows Server 10 Technical Preview
only, and not for Windows Server 2008, Windows 7 nor Windows XP. Please
post your question a forum that is for the correct topic.
Paul Adare - FIM CM MVP
All that blue light from Orthanc at night? That was
Saruman, trying to moderate
-- news.admin.palantir-abuse.sightings. -
Cant get my iphone 5 to sync with my computer (new operating system). Am running XP through a virtual box. When I try to sync the phone it keeps asking for auto lock code, there is no box to type it into and I can find nothing on the phone itself to solve the problem.
This makes it impossibble to sync with my itunes account. Anyone out there able to help ?Have you tried contactint the app's developer?
-
Error While Joining a domain.| Adding a virtual box machine to host machine's domain
Dear All,
I have a Virtual Box(guest) Where Windows Server 2008 r2 is installed.Virtual box is hosted by a machine which Uses Windows Server 2008 r2. Host machine is a domain controller.I have added guest to another domain
other than host.But whenever I tried to add guest machine to host domain It shows me following error(See below).
An error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "crmrc.com".
The error was: "No records found for given DNS query."
(error code 0x0000251D DNS_INFO_NO_RECORDS)
The query was for the SRV record for _ldap._tcp.dc._msdcs.crmrc.com
Could you please suggest me the solution for it?
Thanks and Regards,
YusufHello,
C:\Users\Administrator>ipconfig/all
Windows
IP Configuration
Host Name . . . . . . . . . . . . : MSCRM
Primary Dns Suffix . . . . . . . : crmrc.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : crmrc.com
Ethernet
adapter Network Bridge:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : MAC Bridge Miniport
Physical Address. . . . . . . . . : BA-AC-6F-3F-A3-51
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8573:2122:495b:93bc%16(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.78(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 280669295
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-B1-48-BF-B8-AC-6F-3F-A3-51
DNS Servers . . . . . . . . . . . : 192.168.1.78
59.144.127.17
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel
adapter isatap.{39C0341C-67DC-405D-B8F4-25DA555D53C0}:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.78%12(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.1.78
59.144.127.17
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel
adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
I suppose here that this is a DC/DNS server. I see that 59.144.127.17 is
configured as a DNS server. If 59.144.127.17 is
a public DNS server then please add it as a forwarder.
Once done, run ipconfig /registerdns and restart netlogon service on the DC.
Windows
IP Configuration
Host Name . . . . . . . . . . . . : MYLYC
Primary Dns Suffix . . . . . . . : ow.pearl
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ow.pearl
Ethernet
adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT De
Physical Address. . . . . . . . . : 08-00-27-43-C7-47
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::781f:3c7d:edc:684
IPv4 Address. . . . . . . . . . . : 192.168.1.105(Preferred
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 235405351
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-7A-16-5B
DNS Servers . . . . . . . . . . . : 192.168.1.78
59.144.127.17
NetBIOS over Tcpip. . . . . . . . : Enabled
Please delete the second DNS server.
Also, disable all security softwares and try again.
Are you able to ping the DC? If not, that may be a problem with your routes.
Also, use nslookup to check that all is okay with DNS records.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft Certified
Professional
Microsoft Certified
Systems Administrator: Security
Microsoft Certified
Systems Engineer: Security
Microsoft Certified
Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified
Technology Specialist: Windows 7, Configuring
Microsoft Certified
IT Professional: Enterprise Administrator -
Install stuck: SBS 2011 Essentials on a Virtual Box
I’m trying to do a test install of SBS 2011 Essentials on a Virtual Box virtual machine running on a Win7 64-bit machine. I put the install partition on an external
drive.
The install stops on a window that is titled Installing Windows. The screens says: “There was a problem during the installation. To restart the installation
click Restart. You can also view the installation error logs.”
When I open those installation error logs, I see no error. (It does have Info and Warning lines.)
I’m stuck there. If I could paste in the the contents of the error logs I would, but I can’t copy from the VM until there is an installed OS.
Any help appreciated.Hello Rob,
There may still be a problem with two things.'
1) Installing it on your external hard drive. If it is a 'usb' drive, then it seems at times the software\drivers still causes some type of conflict depending on what type of system you have.
2) Your network interface card is configured set.
Going off the assumption that you have the latest virtual box software, your problem may be point number '1'
Solution that works for some: Installed the virtual machine locally. (Remember, you can still set the disk dynamically to 160 whether you have the space locally or not) Then transfered it to an external drive after everything was installed and
working.
Caveat: Shame to say, you may not have local storage large enough to hold the vm. This is why you probably bought the external drive in the first place. Hope this helps. Just find a machine that will allow you to create the vm locally first
if you can.
James -
Network Limited Conectivity & Virtual-Box
Just bought a new Dell Inspiron 3137 laptop, with 64-bit Windows 8.0 installed (not 8.1). I have four legacy 16-bit programs (Bible study, Sermon editor/reference, 2 games) that I need to use as cannot find more recent versions on the market. So initially
tried to use MS Virtual-PC but it would not install, so then installed Virtual-Box followed by Win-Xp. The W8 OS now (after serious setup efforts) connects ok under Wi-Fi and Ethernet to the internet and to computers on my home network. But Virtual-Box
and Xp fails! looking at my "Networks" W8 pop-up window I see an entry of "Unidentified Network" and that it has limited connectivity. Xp indicates "connected" but received packet count is 0.
Think this is a result of my attempts & connections under Virtual-Box. I go to Network and Sharing Center and find first 2 category are enabled but "All Networks" entry is disabled/off and I cannot find any way to enable! I go to
"Network Connections page and I see 6 entries (Bluetooth, Netgear router, broadband, Virtual-Box, etc). I run the troubleshooter on the Virtual-Box link and am informed that it cannot fix & no useful help provided to me by system! No progress
w/ comparability mode on legacy programs.
I have initially informed Dell Technical support then most recently Oracle of this problem >>> both say it is not their product malfunctioning and that errors are in configuration of Windows-8 >> but no help.
This is serious irritation as have already wasted about 40 hours chasing/messing with this problem >>>> NEED HELP AND SUGGESTIONS - PLEASE!
Thanks .....Thanks Kevin for the reply, but no progress here. I am completely new to Windows 8.0 and slightly new to any networking, so keep that in mind should you decide to reply again, A.K.A., I might need a bit of step-by-step assistance .....
The symptoms here : My new Dell computer finally now connects by wi-fi to home network, has always connected to internet. I am using Virtual-Box v4.12.18 w/ Xp Pro, SP-3. Under Xp in Network I note that it shows "Connected" but received packet
count is 0, sent packet count is hundreds. Looking within W8 at advanced settings, I see 3 network types, 1) Private = enabled, 2) Guest = enabled, 3) All = NOT enabled (and I can find no click, link or setting that
will enable). Have tried with Network Discovery on & off, and with File Sharing on & off, and with 56-bit & 128-bit encryption selected alternatively. So run the Troubleshooter = first pass informed
it could not fix problem : later, troubleshooter stated it fix some problem(s) with incoming connections = at that point I looked and found that under W8 both sent & received packet count was into low thousand but Xp still showed 0 receive.
When I look at Networks under W8 I see "Netgear52" W/ no errors, then see either "Unidentified Network (limited connectivity) OR randomly see "VirtualBox (Limited Connectivity) and so think Netgear52 is what I should be using.
Again under W8 networking pages, I try "Setup Network - Chose Wireless Router" am asked for SSID (whatever?) but showing nothing after 10-minutes. Have made all efforts both with & without Firewall on Xp & I think on W8 also, no changes
to Security Essentials Xp is in NAT mode and have not yet tried "Bridged."
"ipconfig?"
Base system here are : Dell 3137 Inspiron laptop, Win 8.0 + Win-Xp Pro. Motorola Surfboard cable modem. Netgear52 router. Various home networked Eithernet connected computers. Various Tablet & eBook readers connected Wi-Fi. No other component is
reporting any errors and all work Ok. Xp is Ok except zero connectivity to Internet and home network. Need to get Xp connected so can access data for legacy programs off home & church networks.
So your help seriously appreciated! Bill -
Installing oracle db 10.2.0.1 on REHL 5.6 using virtual box
I can't solve this erratic behavior:
Scenario: Phisical machine Windows 7 32b, virtual box v 3.2.12
Virtual machine Oracle Linux 5.6 64b installed without problems (I have installed several machines with p.e. SuSE 10 64b,
SuSE 11 64b and installed Oracle 10g without problems, Linux Oracle 5.6 with Oracle DB 11 ok)
Trying to install Oracle 10.2.0.1 (need to be this version) every time I exec runInstaller, it begins, but simply freezes the
machine. Each time it freezes at different points: sometimes at the first screen, other times I can reach the last screen with
the install button.
¿can someone give any ideas ?
ThanksFirst attempt
The oui freezed the virtual machine, in the screen where i was setting the users passwords
Checking the oraInventory/logs folder, ther are 3 files:
1) orainstallxxxx.err is empty
2) orainstallxxxx.out is empty
3) InstallActions.log: as follows (I'll cut several "middle" lines because of the 30000 characters limits in the forums messages)
INFO: Using paramFile: /opt/install/database/install/oraparam.ini
INFO: Checking installer requirements...
INFO: Checking operating system version: must be redhat-3, SuSE-9, redhat-4, redhat-5, UnitedLinux-1.0, asianux-1 or asianux-2
INFO: Passed
INFO: All installer requirements met.
INFO: The number of files bootstrapped for the jre is 619.
INFO:
INFO: The number of files bootstrapped for the oui is 94.
INFO: Execvp of the child jre : the cmdline is /tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2/bin/java, and the argv is
INFO: /tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2/bin/java
INFO: -Doracle.installer.library_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui/lib/linux
INFO: -Doracle.installer.oui_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui
INFO: -Doracle.installer.bootstrap=TRUE
INFO: -Doracle.installer.startup_location=/opt/install/database/install
INFO: -Doracle.installer.jre_loc=/tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2
INFO: -Doracle.installer.nlsEnabled="TRUE"
INFO: -Doracle.installer.prereqConfigLoc=/tmp/OraInstall2011-05-24_11-54-43PM/prereq
INFO: -Doracle.installer.unixVersion=2.6.32-100.26.2.el5
INFO: -mx150m
INFO: -cp
INFO: /tmp/OraInstall2011-05-24_11-54-43PM:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oneclick.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/srvm.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/share.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xml.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/emCfg.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstImages.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/classes12.jar::/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4-nls.jar
INFO: oracle.sysman.oio.oioc.OiocOneClickInstaller
INFO: /tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2/bin/java
INFO: -Doracle.installer.library_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui/lib/linux
INFO: -Doracle.installer.oui_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui
INFO: -Doracle.installer.bootstrap=TRUE
INFO: -Doracle.installer.startup_location=/opt/install/database/install
INFO: -Doracle.installer.jre_loc=/tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2
INFO: -Doracle.installer.nlsEnabled="TRUE"
INFO: -Doracle.installer.prereqConfigLoc=/tmp/OraInstall2011-05-24_11-54-43PM/prereq
INFO: -Doracle.installer.unixVersion=2.6.32-100.26.2.el5
INFO: -mx150m
INFO: -cp
INFO: /tmp/OraInstall2011-05-24_11-54-43PM:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oneclick.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/srvm.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/share.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xml.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/emCfg.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstImages.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/classes12.jar::/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4-nls.jar
INFO: oracle.sysman.oii.oiic.OiicInstaller
INFO: UnixGroups="{oinstall,dba,}"
INFO: -scratchPath
INFO: /tmp/OraInstall2011-05-24_11-54-43PM
INFO: -sourceLoc
INFO: /opt/install/database/install/../stage/products.xml
INFO: -sourceType
INFO: network
INFO: -timestamp
INFO: 2011-05-24_11-54-43PM
INFO: -oneclick
INFO: Environment Variables:
INFO: ORACLE_HOME =
INFO: PATH = /opt/install/database/install:/usr/bin:/usr/ccs/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
INFO: CLASSPATH =
INFO: Username:oracle
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to '/tmp/OraInstall2011-05-24_11-54-43PM/prereq'. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO: Retrieving the global context: OiicGlobalContext.getGlobalContext()
INFO:
*** Welcome Page***
INFO:
*** Specify Inventory directory and credentials Page***
INFO: Setting the 'InventoryLocation ( INVENTORY_LOCATION )' property to '/opt/oracle/oraInventory'. Received the value from the UI page.
INFO: Setting the 'UnixInstallGroup ( UNIX_GROUP_NAME )' property to 'oinstall'. Received the value from the UI page.
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO: Unable to read the list of homes from the inventory.
INFO: Oracle Universal Installer version is 10.2.0.1.0
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: /opt/install/database/stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.server, 10.2.0.1.0, >0.0.0.0.0, [ 46 ][OH:2]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'EE'. Received the value from the UI page.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'EE,'. Received the value from the UI page.
INFO: The selected install type is "Enterprise Edition".
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to '/opt/oracle/oracle/product/10.2.0/db_1'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraDb10g_home1'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to '/opt/oracle/oracle/product/10.2.0/db_1'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom /tmp/OraInstall2011-05-24_11-54-43PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.server_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.server Product Location: Empty path specified.
INFO: This is not a cluster system.
variable = oracle.sysman.server.EMConfigureOption
value = LOCAL
INFO: Query Returned: true
INFO: Setting variable 's_recoveryAreaDestination' to ' -recoveryAreaDestination NO_VALUE '. Received the value from a code block.
INFO:
*** Specify Database Schema Passwords Page***
Maybe you are looking for
-
Connection in one direction only for MacBook
My airport network has worked fine for years with several computers and printers. Recently however a problem has developed. After awakening from sleep or from a restart my MacBook cannot connect to the other computers on the network. If I connect in
-
Hello everyone. I connected to a WebDav server using nemo and saved it to my bookmarks. Now I want to rename it, but when i right-click to the symbol and choose rename, nothing happens. Nemo writes following to the Terminal: Terminal wrote:(nemo:1357
-
Using Kuler + swatch exchange files in Dreamweaver CS3
What is the "best practice" for taking a swatch exchange file from Kuler and getting either the swatches into Dreamweaver CS3 or the html color values. I like using Kuler to develop test color schemes for my web sites and switching css sheets to dete
-
How do I cast an heir in an argument mapping?
I'd like to be able to use a generalization of an instance variable in my main process flow but inside of a subprocess or screenflow to use a specialization(heir) of the variable. I've tried every combination of cast or conversion syntax in the argum
-
I'm an iMac and MobileMe user, and I publish my calendar easily with MobileMe, and my girlfriend subscribes to it on her MacBook. She wants to publish her calendar, but she doesn't use MobileMe. How do we go about it? I have my own domain registered