Problem in WAD (The requested query / does not exist on the current server)

Dear Guru's
When i execute a Web Application in WAD in the selection screen suppose if i give Key product  as 86000 then check and execute i get correct data. Then if i come to  backpage (Selection screen again using backspace) and change Key product  as 86022  then check and execute then i get following error
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Can any one please provide me some good solution...
We are using BI 7.0 sp 16, But i am executing this Wed Application in 3.1WAD.
Thanks and Regards,
kalyan

Dear Jai,
Issue is in WAD selection screen for first product valuse every thing if fine, when i go back and change product value and then CHECK and EXECUTE the following error comes.
The requested query / does not exist on the current server
System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
Any one have any idea plssssssssssssssssssssssssssssssssssss..........
dude's some soln.....
Thanks and Regards,
Dev
Edited by: Srinivas dev on Jul 4, 2008 2:45 PM

Similar Messages

  • E2E RCA - The requested query / does not exist on the current server

    Hi All,
    The RCA for managed system is configured successfully and we are getting EWA for JAVA also.
    But when i try to look at the statistics through Workload Analysis it gives error "The requested query / does not exist on the current server" and "unknown or deleted query".
    I again tried to run CCMSBI_SETUP_E2E report but the problem STILL persists.
    Please let me know what are the other methods i shall try.
    Thanks,
    Rohan

    Hi,
    Our solution manager is in EHP1 SP23 and BI content is on 704 SP05.
    Firstly the BI was configured in 001 client, we changed it to production client and activated the source system as mentioned in SOLMAN_SETP -> Basic configuration.
    Later i found out the there are no queries.  I already told to update the BI content and SAP BW patch to SP06.
    Do you think it will work?
    Thanks and regards,
    Rohan

  • Error - The requested query does not exist on the current server

    Hi all,
    We've started to get an error when exeucting queries on our BW system.  The erorr is "The requested query does not exist on the current server".  Even though I can go in an change the query on the server, I get this message when I try to execute it.  I also get the same message when I try to run the query in RSRT.
    Has anyone else run into this problem?
    Thanks!
    ~Matt

    The problem that we had was due to a pre-query not transported up.  We transported up the missing pre-query and everything worked fine.  If you go into change mode on the query and press the check button.  It should tell you which query is missing.

  • The requested query does not exist on the current server

    Hy, i created an workbook an QAs with a query that i have trasported from DEV.
    The query exist on QAs system but when open the workbook i receive this error message:<i>'The requested query does not exist on the current server'</i>.
    When i select ok, the workbokk is opened correctly because the query exist in system QAs.
    How can i remove the initial error message .
    Thank's
    Andrea
    System: BI 7.0
    tool BEx version  7.0

    Hi
    When you create a workbook in DEV, you will be assigning a query for that workbook
    When you transport workbook from DEV to QA,the assigned workbook comes along with it
    When you transport only query from DEV to QA, there are certain technical elements called query elements which may not have transported properly
    To avoid this inconsistency between DEV and QA,it is advisable you transport the workbook again....Create new workbook in DEV, assign a query, transport the workbook to QA
    Regards
    N Ganesh

  • Requested query does not exist on the current server.

    Hi All,
    I am facing a problem in BI 7.0 related to query view.I am able to create a view on a query and can successfully save it .But when I am trying to open it using Bex Analyzer, it throws an error that query does not exist on the current server.
    Please find the steps below which I did to create a query view in BI 7.0.
    1.Executed query and then clicked on save from the tool bar.It asks me to save as workbook or save as view.I clicked on save as view and gave some name to view.It saved successfully.
    2.Now when in Bex I am trying to open the view , it gives the message 'The requested query does not exist on the current server'.
    Please help me in solving the issue.
    Regards,
    Phani.

    Hi,
    I am facing the same problem, though some others of my views can be opened.
    We had an upgrade of the system to Support Package stack 13. Maybe this caused problems.
    My BEx Analyzer Version is:
    Support Package 14, Patch 3, Revision 811
    Philipp

  • Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

    Hi,
    I am getting this error in most of our WSUS servers.
    Content file download failed.
    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
     After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
    Log Name:      Application
    Source:        Windows Server Update Services
    Date:          12/19/2014 4:45:55 PM
    Event ID:      10032
    Task Category: 7
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ******
    Description:
    The server is failing to download some updates.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Windows Server Update Services" />
        <EventID Qualifiers="0">10032</EventID>
        <Level>2</Level>
        <Task>7</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
        <EventRecordID>496887</EventRecordID>
        <Channel>Application</Channel>
        <Computer>*****</Computer>
         <Data>The server is failing to download some updates.</Data>
    This error is happening everyday. Please advise for a fix.

    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
    Source:        Windows Server Update Services
    Description:
    The server is failing to download some updates.
    This error is happening everyday. Please advise for a fix.
    If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
    If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
    For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
    For a downstream server, figure out what the affected updates are and fix the upstream server.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • The requested resource does not exist - EAR - Jsp

    Hy!
    Following a tutorial I'm trying to create a small application in the Developer Studio.
    I created a Table, an EJB-Project with an Entity Bean and a Stateless Session Bean, a Web-Project with a JSP-File and an EAR which I deployed. Now the JSP form should be available at http://[server-name]:50000/employee/view.
    But I get:
    404   Not Found - SAP J2EE Engine/6.40
    The requested resource does not exist.
    Details:     Go to main page of this application!
    "main page" is a link which refers to http://localhost:50000/index.html which is the SAP Engine Start Page.
    This is my first experience with sap netweaver. So I don't know where I should start to search for the problem or how to solve it.
    In the web.xml of the WebProject there is the following code for the servlet mapping:
    <servlet>
         <servlet-name>NewEmployee.jsp</servlet-name>
         <jsp-file>/NewEmployee.jsp</jsp-file>
    </servlet>
    <servlet-mapping>
         <servlet-name>NewEmployee.jsp</servlet-name>
         <url-pattern>/view</url-pattern>
    </servlet-mapping>
    This is the code in the application.xml of the ear which should make it possible to access the webproject under .../employee.
    <module>
         <web>
              <web-uri>EmployeeWeb.war</web-uri>
              <context-root>employee</context-root>
         </web>
    </module>
    Best Regards,
    Carina

    Hy!
    I tried several changes and found out, I just had to remove the ' / ' bevor NewEmployee.jsp in the jsp-file - tag.
    <servlet>
         <servlet-name>NewEmployee.jsp</servlet-name>
         <jsp-file>NewEmployee.jsp</jsp-file>
    </servlet>
    Now it works and I'm able to test the jsp. There's a form and after a submit a jndi-lookup is performed.
    Object ref=jndiContext.lookup("java:comp/ev/ejb/EmployeeService");
    It seems the EJB reference in the web.xml:
             <ejb-ref>
              <ejb-ref-name>ejb/EmployeeService</ejb-ref-name>
              <ejb-ref-type>Session</ejb-ref-type>
              <home>com.sap.bsp.EmployeeServicesHome</home>
              <remote>com.sap.bsp.EmployeeServices</remote>
              <ejb-link>EmployeeEjb.jar#EmployeeServicesBean</ejb-link>
         </ejb-ref>
    doesn't work, because I get:
    com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at java:comp, the whole lookup name is java:comp/ev/ejb/EmployeeService.
    Looking forward to a hint
    Best regards,
    Carina

  • [Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

    I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
    Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
    After some checking I found out that the latest added node was giving problems.
    VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
    I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
    In the other there were no VM's on the node so suspending went fine.
    What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
    After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
    A reboot resolves the problem, but only for about a week.
    I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
    Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
    No waiting at all.
    The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
    I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

    Hi,
    Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
     disabled the HP NIC team service from services and restarted the WMI service.
    The related third party information:
    Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • 404 Not Found, the requested resource does not exist

    Hi gurus,
    We're faciing an issue where when we submit data back to the SRM shopping cart from the MDM catalog UI, we intermittently get a "404 Not Found, the request resource does not exist" error page.
    Below is the HTTP trace upon item checkout:
    POST     200     text/html; charset=UTF-8     https://server/webdynpro/dispatcher/sap.com/tcmdmsrmcat~uisearch/MDM_SRM_UI_App?sap-wd-cltwndid=0cf753a3797111dfa7c662676002500a&sap-wd-appwndid=0cf753a4797111df966b62676002500a&sap-wd-norefresh=X
    GET     (Cache)     application/x-javascript     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/js/autorelax.js?7.0103.20091012142306
    GET     404     text/html     https://server/webdynpro/resources/sap.com/tcmdmsrmcat~uisearch/Components/com.sap.mdm.srmcat.uisearch.master.Master/ProductForm30703.html
    GET     (Cache)     text/html     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/html/blank.html?7.0103.20091012142306
    GET     (Cache)     application/x-javascript     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/js/autorelax.js
    GET     (Cache)     text/html     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/html/backprevention.html
    GET     (Cache)     text/html     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/html/backdummy.html
    GET     (Cache)     application/x-javascript     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/js/autorelax.js
    The page https://server/webdynpro/resources/sap.com/tcmdmsrmcat~uisearch/Components/com.sap.mdm.srmcat.uisearch.master.Master/ProductForm30703.html is where the 404 error is being generated. And this error is also intermittent, so some time, the page will load with GET 200, but other times, it will show GET 404.
    Does anyone know what this ProductForm#####.html does? The ##### is a numerical value that seems to be incrementing on every catalog submission back to SRM shopping cart.
    MDM build 03.69
    Thanks.

    Sudhanshu appreciate your quick responses and the intermittent error is what's troubling me as well.
    Let me run through the SRM SC scenario for example:
    1. In shopping cart professional > Add Item > SRMMDM Catalog
    2. In the SRM-MDM catalog > Add an item to cart > Checkout
    3. After checkout, is where the intermittent error comes. Sometimes, the ProductForm.html is generated without a problem, and the product data is returned to the SRM SC in line 1.
    4. When we're back in the SRM SC professional > Add Item > SRMMDM Catalog  to punchout to the catalog again.
    5. Again, in the SRM-MDM catalog > Add an item to cart > Checkout
    6. Boom...the ProductForm.html page generates a 404 error.
    The scenario is similar from SUS to MDM, where for example, the first (or second or third) MDM punch out works, then all of a sudden, the 404 error is generated and it's always at the ProductForm.html where the 404 code is given.  I have yet to find a pattern to see what triggers this 404 error. Sometimes the first MDM punchout will generate this 404 error. Sometimes it will work up to 4 or 5 punchouts before the 404 error is generated.
    I'm have our BASIS team do a thorough analysis at the portal level to look for errors and still waiting for SAP's response.
    Another interesting thing is that this ONLY  happens in our dev box. In our QA box, we don't see such a behavior.
    Thanks for your time!

  • GCWebservice not found (The requested resource does not exist)

    Dear expert,
    According to the following link, there is a standard web service allowing the update of xml file into portal :
    http://help.sap.com/saphelp_banking60/helpdata/de/45/485c1a5b875b3ee10000000a1553f6/frameset.htm
    The problem is that I get the message "  The requested resource does not exist." when I launch the URL http://<server>:<port>/GCWebservice/Config1?wsdl (where <server> and <port> are the server and port number for my portal).
    Please do you know how to assist on this topic ? do you know how we can access to the GCWebservice and eventually download it to the portal ?
    Thanks and regards

    Hi all ,
    Thanks for the replies .
    Shravan ,
    I pinged my XI and is working . we have already added 
    the IP Address and the host name , but the same error
    is coming .
    Anirban,
    Checked all the necessary services again as suggested
    by  you .
    Andreas ,
    > is to set the abap profile parameter
           LOCALHOSTFULL to the fqhn.
    Can you please let me know where to set the abap
    profile parameter "LOCALHOSTFULL" as suggested by you .
    Thanks
    Shikha

  • Web Dynpro image not found: The requested resource does not exist

    Hi everybody,
    I'm experiencing a strange Poltergeist, so I would like to cry out the issue and hope any kind sould could help me
    In my WebDynpro application, I show a JPG picture which is located in the own project, that means in "src/mimes/Components/metromadrid.net.formacion.Cursos". The image appears correctly in my Development environment, but when the activity is moved to the Consolidation System (I'm using JDI), the image doesn't appear. If I try to access it directly, via URL, the messagen shown is "404 Not found: The requested resource does not exist.." (the URL accessed is http://hostname:port/webdynpro/resources/metromadrid.es/formacionapp/Components/metromadrid.net.formacion.Cursos/foto_vacia.jpg)
    The point is that in the same Consolidation environment I have already some applications with images, which are found and loaded without any problem.
    I have checked if the image appears in the corresponding active repository and everything seems alright (I mean I can see the file there).
    Any idea? It would be really appreciated, since my time to solve the problem expires in few days...
    Thank you very much in advance!!
    Isidro Lopez

    Hi Isidro,
    your mime files were most probably not added to your NWDI activities when developing your Web Dynpro DC. This means when adding these mime files to the src/mimes/<comp package>.<Comp name> folder the Web Dynpro Tools have most probably not detected the new mime files. When testing your application on in your local development environment all images appear as they exist on your local file system. As missing mimes do not cause a CBS build failure you won't encounter a designtime error.
    Please check whether the corresponding mimes are listed as   'local only' (house symbol) in your DTR perspective. In case they are listed as 'local only' you must explicitly add them to an activity.
    I have also encountered this missing mime problem before but I have not started any investigation to really determine the reason for it.
    Best regards, Bertram

  • Need urgent help :'The requested resource does not exist error'

    Hi All,
    I am getting 'The requested resource does not exist error' when trying to acess http://machinename:50000/irj
    Even when i access http://machinename:50000, i get the same 'The root directory does not exist' error. I checked in visual admin, there is no other application deployed except my application.
    Any clues? Pls help
    thanks
    bhawna

    HI ,
    Did succeed to solve your problem. I am running into same problem.
    Any help is welcome.
    Thank u very much.

  • Requested query does not exist on current server

    I have transported a query from DEV to PRD and it went in fine. Now when i try to open the query in designer or analyzer i end up getting error " Requested query does not exist on current server". Though i can run this in RSRT and also can see its entry in RSZCOMPDIR table. Also i am able to execute this query in analyzer when i run it from the history.
    Please advice what went wrong and what needs to be done.

    Try re-generating the Query in production.
    goto RSRT and selet the query. Now click on the third button Generate Report
    Now try opening the Query from Query Designer...

  • Alert Configuration : 404 Not Found The requested resource does not exist

    Hi all ,
      We are facing problem in Alert configuration and
      Alert Inbox . We are on SP14 service patch
      We are getting error as " 404 Not Found The requested 
      resource does not exist "
      We have activated all the necessary services in
      Tcode : SICF as mentioned in the config. guide
      We have executed the program :
      SXMB_ACTIVATE_ICF_SERVICES
      We have referred the SAP note : 750287 and tried to
      set the httpport as per the note but again we are
      getting error as "The page cannot be displayed" .
        We have checked the parameters in Exchange profile
      for httpport as well as for host also .
      Can someone please guide us on this . 
      Thanks 
      Shikha

    Hi all ,
    Thanks for the replies .
    Shravan ,
    I pinged my XI and is working . we have already added 
    the IP Address and the host name , but the same error
    is coming .
    Anirban,
    Checked all the necessary services again as suggested
    by  you .
    Andreas ,
    > is to set the abap profile parameter
           LOCALHOSTFULL to the fqhn.
    Can you please let me know where to set the abap
    profile parameter "LOCALHOSTFULL" as suggested by you .
    Thanks
    Shikha

  • The requested resource does not exist

    Hello!
    I have a programm, made in Visual Stuio2005(.NET). I installed the PDK for .NET and now i get this failure massage:
    The requested resource does not exist.
    Any ideas?

    Hi Guntram,
    Change link's url to some static url, like www.google.com and see if it works. If yes,
    then the problem caused by wrong url. Anyway, if you want to navigate between iViews
    developed in PDK for .NET I would suggest you to read this documentation:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/go/km/docs/library/dotnet/pdk%20for%20.net/developer's%20Guide%20PDK%202.0%20for%20.NET/index.html">PDK 2.0 for .NET Development Guide</a>:
    1. Tutorials -> Tutorial 8: Implementing Object-Based Navigation
    2. Tutorials -> Tutorial 7:Client-Side Events and How to -> Portal Client-Side Events
    3. How to -> Portal Server-Side Events
    and in <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/dotnet?rid=/lw/uuid/95628888-0d01-0010-7d97-f0d771999d0f">pdk 2.5 for .NET Development Guide</a>:
    1. How to -> Using the TabStrip Control ( TabStrip is available in PDK 2.0 too, but without the documentation ).
    Regards,
    Rima.

Maybe you are looking for

  • How u guys build query in program

    Hey guys, i was wondering how u guys build queries in the program. i mean if you use String or StringBuffer. e.g. SELECT * FROM MY_TABLE WHERE X=someValue and Y=someValue and Z= someValue. if i use String i have to use + operator to get the values at

  • Agent proxy not enabled

    The agent was not able to submit data on behalf of another computer because agent proxy is not enabled. Details:Health service ( OM.test.local ) should not generate data about this managed object ( Microsoft.SQLServer.2012.ReportingServices.Deploymen

  • Customizing OBIEE 11.2

    Hello, i have to customize OBIEE 11.2 to our company corporate design. I study the two Papers: - Customizing Oracle Business Intelligence Enterprise Edition 11g (August 2010) - System Administrator's Guide for Oracle Business Intelligence Enterprise

  • Design to avoid reflection

    Hello: I'm creating an application which loads other classes at runtime (plugins) and it must expose some of these plugins methods to the exterior. All the plugins implement a common interface (ICapsule), however, the methods that need to be exposed

  • Tricky SQL query to DUMP to flat file

    Hi All, I have used UTL file utility before to dump table data into a comma seperated file but this time I have a tricky problem. I have a table called customers with the following fields work_order_no, customer_no, contract_start_date, title, Name,