Problem in window bar

hi
at present iam working in oracle forms,i have one doubt,
while i am running the form in the top of the window oracle forms runtime will appear in the top of the window bar as well as close,maximize,minimize button will appear and then below that menu bar wiill appear,below the menubar icons will appear and then below the icons there is a form window...
so in that i dont want anything apprar in the top of the window bar.
ie.oracleforms runtime should not appear,max,min,close button shouldnot appear,
so what i have to do

pls do not post the same question multiple times....ok
follow the link
problem in button
Kris

Similar Messages

Firefox window bar display problem

The size of window bar of my computer is customized, when maximize firefox, there is a display problem about the window bar of firefox, the windows bar of firefox shows different color strips.

this is the picture of problem window bar of firefox.

Why can't I click on the window bar in quicktime X windows?

For some reason, I can't click on the window bar at the top of movie windows in Quicktime X. When I do so, it acts as if I'd clicked on whatever was behind the movie window. This means that I have to close windows with the keyboard rather than clicking, for example.
This started happening before I upgraded to Mavericks, and continued after. Reinstalling the OS did nothing.

Did you use the Migration Assistant updater before you installed Mavericks?
I ask as a resident problem that follows one across a system upgrade usually comes on the heels of a data migration. (I was vexed right up through 10.6 by a migration of data from Panther!)
If so, backup all your files and do a clean install. It would be easier to walk you through if I knew the configuration of your Mac and whether or not you have a bootable optical disk or an image on a USB thumb drive.
Deb.

Mail reports huge message count in window bar

So I run my own mail server for my stuff via S/IMAP (IMAP over SSL) using Dovecot IMAP server on Linux.
At random intervals, Mail.app starts erroneously reporting HUGE numbers of messages in the window bar; right now it says "Inbox - Coldstripe (4294967239 messages)" ... and also a separate S/IMAP account running on Exchange Server does the same thing periodically. I assure you I don't have but 50 messages in the Inbox, and it's not a unpurged message problem, I have it setup to delete instantly. This is confirmed by looking in my Inbox maildir directly on the server.
If I do Mailbox->Rebuild, it fixes the problem, only to have it come back later. This does not happen with other mail clients such as Thunderbird.
Any suggestions? Thanks!
Rob K

Have you deleted the Mail accounts and started from scratch bringing it back in? If you're all IMAP, it should preserve everything.
Check out your permissions to be sure nothing got messed up with that on Disk Utility and see what happens.

Ratpoison: Problems with windows autoscaling and conky statusbar

Hi all!
I am newbie with ratpoison and yesterday made fresh installation. Everyting else did well expect window autoscaling and conky + dzen2 statusbar.
What I did:
I followed those steps from archwiki for setting up dzen: https://wiki.archlinux.org/index.php/Dzen
my .conkyrc looks like a same as in the wiki:
background no
out_to_console yes
out_to_x no
update_interval 1.0
total_run_times 0
use_spacer none
TEXT
^fg(\#ff0000)${loadavg 1 2 3} ^fg()${time %a %b %d %I:%M%P}
my .xinitrc looks like:
#!/bin/bash
FG='#aaaaaa'
BG='#1a1a1a'
FONT='-*-terminus-*-r-normal-*-*-120-*-*-*-*-iso8859-*'
conky | dzen2 -e - -h '16' -w '600' -ta r -fg $FG -bg $BG -fn $FONT
feh --bg-scale /home/tetrao/walls/hn.jpg &
# setup urxvtd daemon
urxvtc "$@"
if [ $? -eq 2 ]; then
urxvtd -q -o -f
urxvtc "$@"
fi
unclutter -root -grab -idle 1 &
exec ratpoison
and .ratpoisonrc
startup_message off
escape C-z
set padding 0 16 0 0
bind x exec $(dmenu_path | dmenu)
bind C-x exec $(dmenu_path | dmenu)
bind c exec urxvtc
bind C-c exec urxvtc
bind b exec uzbl-tabbed
bind C-b exec uzbl-tabbed
# Undo
bind u undo
bind C-u undo
definekey top Print exec import -window root ~/ss-`date +%Y%m%d%H%M%S`.png
definekey top S-XF86AudioRaiseVolume exec ratvolume Master 3%+
definekey top S-XF86AudioMute exec ratvolume Master 0
definekey top S-XF86AudioLowerVolume exec ratvolume Master 3%-
definekey top XF86AudioRaiseVolume exec ratvolume PCM 3%+
definekey top XF86AudioMute exec ratvolume PCM 0
definekey top XF86AudioLowerVolume exec ratvolume PCM 3%-
definekey top C-S-Up focusup
definekey top C-S-Left focusleft
definekey top C-S-Down focusdown
definekey top C-S-Right focusright
definekey top C-M-Up prevscreen
definekey top C-M-Down nextscreen
definekey top M-l exec ratpoison -c "select -" -c "gprev" -c "next"
definekey top M-h exec ratpoison -c "select -" -c "gnext" -c "next"
definekey top M-j next
definekey top M-k prev
So I did 16 pixels hole for the conky statusbar. Still I cannot see anything on the top of screen. (Just empty hole)
Problem with windows autoscaling is that it doesn't fullfill whole screen. I can also see two additional small holes at the bottom and right side of screen (eventhought I didn't made those by the config). Strange isn't it?
I put my print screen, hope it tells more about the problem:
What I should to do text? Edit some files, but I dunno which one and how?
I appreciate your help.
Cheers!

fr33ke wrote:
About the small holes, see "Why is there a small gap between my terminal and the edge of the screen?" in the ratpoison FAQ.
I'm not sure about your dzen/conky problem, maybe you need to "unmanage" its window? See the ratpoison documentation.
That fixed autoscaling issue. Thx a lot!
Any ideas, what is wrong with dzen+conky bar? I quickly read ratpoison manual and didn't find any help for this problem.

Installation problem on windows server 2008 r2 datacenter edition 64bit

hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan

> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

Problem on Windows 7 Home Premium cant open program for using codes like visual studio 2012

I have problem my windows 7 Home Premium because of visual studio 2012..I can't open even in several times, I don't know what happen, and sometime it is so low to process whenksn it to open my laptop..Why is that pleas do reply..ASAP! tha

Hi,
According to your description, it seems like VS itself problem, you can try to repair this program through Control Panel for test. If no use, it would be better to post your question at VS forum for further assistance.
Contact VS forum:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio%2Cvsarch%2Cvsdbg%2Cvstest%2Cvstfs%2Cvsdata%2Cvsappdev%2Cvisualbasic%2Cvisualcsharp%2Cvisualc
Roger Lu
TechNet Community Support

TS3918 I am experiencing this problem on Windows 7 64 bit. Any suggestions would be appreciated.

I am experiencing aniTunes reinstall problem on Windows 7 64 bit. I have uninstalled the iTunes product and reinstalled 11.02 for windows 7 64 bit but can't get iTunes going again. The first error message I get is: "The file "iTunes Libirary.itl" cannot be read because it was created by a newer version of iTunes". The next error message I get is: "There is a problem sending the command to the program." Any suggestions on what to do next would be appreciated. ( I would have posted this in Windows area had I been given a choice.)

I believe that message can sometimes be a sign of a corrupt library file, unless of course you've tried to downgrade to an older build of iTunes. Restore it as described in this post.
tt2

CPU Overheating problem on Windows 8.1 Pro (installed with BootCamp)

There is a really important overheating problem on windows 8.1 (installed with bootcamp) even i do nothing Cpu is 50-60-70 Celcius degrees. This is really annoying problem. Most of users necessarily need windows OS for using third part programs that doesnt exist on OS X platform. I think this problem is important and has to be fixed as soon as possible.
My brand new Mac:
MacBook Pro (Retina, 15-inch, Mid 2014)
2,5 GHz Intel Core i7
16 GB 1600 MHz DDR3

I have the same problem on macbook pro retina 15 late 2013 - top configuration

Problem with windows and my monitor in after effects

HI . before any thing excuse me for speeking english.
i have a problem with windows in after effect in my monitor
my monitor is 15.6 and resolution is 1366*768
for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
Thanks.

Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
Mylenium

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

Problem in window bar

Similar Messages

Maybe you are looking for