Problem in XI transport

Hi,
We are having a common SLD for development and production environment. We have a set of business systems, belonging to third party technical system, from which we get files and we post them to R3. Each business system has a logical system name associated with it. The scenarios are working fine and now we are planning to transport them to production.
Here we have a problem. The logical names(Partner names in ERP) used by business systems in development and production are same. In SLD, we are not able to create new business system for production transport group with same logical system names, since they have already been taken up in development group. And without transport group assignment configuration objects are not getting transported to production.
Can we have a work around which would solve this problem?
Thanks,
Bhavish

Hi Barry,
I did not understand what you mean by DEV, PRD etc. Do you mean having separate instances of SAP XI? Well, they are in place. However, we have one common SLD for all.
Moreover, the partner names used in all systems are identical. And all these partners are business systems belonging to Third Party Technical Systems in SLD. So ther's no chance of having separate logical system names since there are no distiction based on client.
Hi VJ,
I have thought about solution you suggested. However, it is not possible to make changes to Partner Profiles now since testing has been done and approved. Moreover, client has been trained on using these. So any modification would not be appreciated.
Please let me know if we could create Two Business Systems having same logical system name. In general, it is not possible. However, is there a work around?
Thanks,
Bhavish

Similar Messages

Problem when i transported DTP from DEV to QA

I am facing a problem when i transported DTP from DEV to QA It is not in the folder were it have to be,but i can see it in RSBKDTP table of QA

Hi,
One info regarding DTP, Technical name will get differ from system to system through out the landscape ( Dev, QA, Prod) . So you have to search with Description of the DTP instead of technical name.
Regards,
Sridevi.

Problems related to transport

Hi,
I have transport A and transport B.
A contains - CL_ABC and currently is under progress.
B conatins - test cases which are under class CL_ABC.
Now the problem is I have released B and I am still working on CL_ABC which is under transport A.
Will it create a problem? What can be the resolution? Or when I release transport A, work done under B will also work fine???
Please help.
Regards,
Arpit

Hi Arpit Goyal,
Generally you should transport firstly A and then B because B contains some test cases regarding to A. But you trabsported firstly B right? .. No problem you can transport A, after transporting this request A your program will be workig fine.
Note : Program is not generated when you released the request B, you should release A also. After relese this your program will be working fine.
Regards,
Mahi.

PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

hi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula.

Problem with SPAU Transports after Upgrade and after applying SAPKW70016

Dear All,
we copied old dev to new QA, upgraded new QA, then copied new QA to new DEV.
did the SPAU adjustments in DEV. At that time DEV SAP_BW version was SAPKW70015. After that we applied SAPKW70016. Now we're having problems with the SPAU transport because of the application of SAPKW70016.
Requested to kindly suggest ASAP.
Thanks & Regards
janardhan Kumar K

Hi,
Could you please to be more specific with the error ? Please check the log e send us the message error that is happening during the transport.
Thanks,
Walter Oliveira.

Problem with file transport

Hi ,
I am transporting some of my XI 3.0 objects from XIQA to XIPROD.
When I am importing the objects in XIP I am getting numbers of problem.
1- Scenarios SOAP to RFC . when I am activating the objects it saying
Communication Channel | PRD_400 | RFC_QA3_Receiver:
Enter a value for attribute 'Application Server'
Enter a value for attribute 'System Number'
Enter a value for attribute 'Logon User'
Enter a value for attribute 'Logon Password'
Enter a value for attribute 'Logon Language'
Enter a value for attribute 'Logon Client'
Do I need to Give these values manually again as they are moved from Env to other?
2- Why my Receiver communiation channel coimg as
Communication Channel | PRD_400 | RFC_QA3_Receiver:
As this PROD env it should come PR3 in place of QA3.
I have also transport other interfaces in PROD but in that there was no such problem with Communication channel Name.
Regards

Do I need to Give these values manually again as they are moved from Env to other?
When we transport ID objects, the values stored in the channel get lost and have to be manually enetered......it happens even for DEV --> QA environment.
Now your channel should reflect PROD-related data.
2- Why my Receiver communiation channel coimg as
Communication Channel | PRD_400 | RFC_QA3_Receiver:
The channel name does not depend on the environment it is present....verify the name once again!
Regards,
Abhishek.

Problem in Releasing/Transporting Request from Cust & Development Client

Hi,
I had made up a report and i trying to transport it into the PRD Server but the problem when i use Tcode SE09 and there i clicked on the su-request ID it got released and when i clicked on main request ID it has givne run time error. But again i execute the transaction code SE09 and tried to realease the main request ID ,it is not allowing me to do it as a Message displays :-
Task DEVK904185 has the status "Release started"
I dont know why it is happening ? I had relaesed a lot of request before but never faced a problem like that.
Please guide me how to solve this tranport problem..
Edited by: nav009 on Dec 23, 2009 7:46 AM

Hi Juan,
The error which had came during the releasing of main request id was:-
Short text
    Operating system cannot close file "\\piic071\sapmnt\trans\tmp\DEVE904185.DEV"
What happened?
    Resource bottleneck
    The current program "SAPLSLOG" had to be terminated because
    a capacity limit has been reached.
I am currently at display mode of request in which there is a tab named object in which there are 2 lines present. These are:-
1. Comment Entry : Released ; Program ID : CORR(Comment Automatic) ; Object Id: RELE(Comment Entry: Released);
     Object Name: DEVK904186 20091223 115834 ABAPER
2. Program.Program ID : R3TR(OBJECT) ; Object Type : PROG ; Object Name: ZBDC_MM01_R1ZBDC_MM01_R1
The package which we use is ZABAP which is used to transport all the creations and modifications it to the PRD Server...
Is there any way of solving this issue......

Problem in moving transport request

Hi,
While performing transports at OS level, we are facing some error.
below is the log. Please look into this issue.
We have already trigged manually RDDNEWPP and
SAP_TRIGGER_RDDIMPDP from client 000
>tp import pf=TP_DOMAIN_FD3.PFL FD3K915202 FT3 CLIENT=010 U01268
This is tp version 372.04.08 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: The following call returned with exit code 236:
ERROR: sapevt SAP_TRIGGER_RDDIMPDP -t name=FT3
ERROR: Background jobs cannot be started.
ERROR: Please check trace file dev_evt.
We have also manually triggerred RDDIMPDP via sapevt from OS level. But issue still persist.
There is no error in Import log and import history. But we are getting the below error in slog.
WARNING: System FT3. Warning.        20090602114617 :
ERROR:       The following call returned with exit code 236:
ERROR:         sapevt SAP_TRIGGER_RDDIMPDP -t name=FT3
ERROR:       Background jobs cannot be started.
ERROR:       Please check trace file dev_evt.
WARNING:       (This warning is harmless if no further warnings follow.)
The error in dev_evt is as follows:
Tue Jun 2 09:51:58 2009
Trace File of External Event Raiser (Level=2, Append=0)
EventID: SAP_TRIGGER_RDDIMPDP
ERROR ***: Cannot determine mshost
Please suggest..................
Thanks,
Sourav Misra

I have resolved the problem........
As per SAP note 821875 point 2(Security settings in the message server), MSEACCESSDENIED (or rc= -20) errors message can occur if the parameter rdisp/msserv_internal is not defined with 0 value
We have removed rdisp/msserv_internal from instance profile, and add it again in the DEFAULT profile with 0 value. Remember that, after this, it's important to check that the value has been correctly   changed in the correct file DEFAULT.PFL
After this, we have restarted the instance.
I have attached also the following SAP note for information:
826779 - sapevt (Version 5): Security settings in the Msg.g.
                        Please maintain the RDDIMPDP in all clients with user
                        DDIC in accordanceof note 11677. Goto SE38, use RDDNEWPP
                        to schedule RDDIMPDP on client
                        000 and other client with DDIC user.
Thanks,
Sourav Misra
IBM

Problem in Importing Transport Request

Hi Everybody,
I have a Problem in Importing a Change Request . Yesterday ABAP person had Released two change request from DEV to PRD. I imported the 2. i got successfully imported but another one is still importing( status:Truck symbol)
after that i have imported many Request in PRD server, except this one. how to stop importing this? what may be the reason?
Regards,
Siva

Hi Siva Kumar,
You can reset the status of that transport.
Select the transport (which is showing the running status) -> Go to the import monitor -> right click the truck symbol and delete it.
Best Wishes.

Problem in Importing Transport Package in Quality

Dear All,
I had created an Transport Package on Development Server of EP.
That transport package has got three ivews and one work set and two role.
I downloaded that Transport package ".epa" file on my local machine.
I tried to Import that ".epa" file in Quality Server of Ep i am getting an error "Could not upload file. Check the log files for details."
I need to know how to resolve this problem.
Please help fast.
Regards,
Swapnil Indulkar

Hi swapnil,
Whats the error you are getting in Log file.
once check it provide the details here. and at the time of Exporting in EP Development is it given the sucess message with '0' errors?
Check the log file in <host:portno/nwa-> Monitoring --> logs and traces
Regards
Mahesh

Problem with the transport request

A request was released to Prod.
In D and Q the request is success but in P it shows one error..
so, we tried to create a new request and copy the objects from the old one.
but v r gettiing the objects not below the task(in req) but below the req..
so it is not possible for me to release it.
I also tried to edit the code , but when i saved it it is not asking for a new request. is it bcoz old req is released to P?

Hi,
In production system, it is showing an error in the logs while transporting : Generation of Programs and Screen and return an error code 8. there are no repositary objects to transport. this is just simple code modification. In Quality and Dev system, transportation was done successfully with out causing any problem.
So, we tried to create a new transport request by editing the code in development.however it is not asking for the new transport request number while saving or activating.
Also, we tried to create a new TR manually using SE09 and placing the modified objects under the task. but, transport request and task number are getting created at a time and while assigning the objects, the objects are under the request not under the task.the objects should be under the task only.
this is the problem what exactly we are getting. Please clarify..
Thansk!!!

Problem with "Create Transport Request"

Hi all,
Iu2019m working with Solution Manager and Charm. I have a problem when I create a transport request.
After that I put regular correction into status u201CIn developmentu201D I choose u201CCreate Transport Requestu201D from the menu but the system display the message u201CThe last action triggered is locked in the task listu201D . Is it a problem of authorization in satellite system? The user that I use to create a transport request have sap_all profile in the satellite system. What settings do I have to use in satellite system and in solution manager?
Thank in advance
giovanni

Make sure that the profile S_TMW_IMPORT and S_TMW_CREATE has the correction authorizations assigned and that it is assigned to the user TMSADM of client 000 of your satellite system.
Note 807228 can be useful.
Hope this helps,
Roel

Problem in extended Transport control while setting up transport request.

I created a BDC program which will create a database table upon executing..
The problem is the program worked well since yesterday, But today when i executed it , it is showing a information message when creating a new transport request .
Extended transport control is not active:
Cannot specify target client
Since it s a recording ,and all the windows are processed using an OK CODE, this info box comes all of a sudden .I dont kno what went wrong , coz it was working fine the previous day.
i could not create a new workbench request even after ignoring that info message.
Pl suggest me what could be wrong.

This message has a long text, please read it.
Check with your system administrators, if they have changed anything regarding the transport process.
In addition, instead of using "fragile" recordings, try using function modules like DDIF_TABL_PUT.
Thomas

Problems with RFC transport confirmation in a BPM

Hi everyone.
I have an interface that is stopped now. The problem is that XI tried to send a RFC and the R3 backend is down.
Now i have this interface waiting for a transport confirmation (since last sunday morning).
is there any way to 're-send' the RFC or 'unlock' this situation?
Regards.

Hi.
Status of the RFC is ok. At the right side of the status, i have a green '?' due to no-confirmation os the transport of the RFC. In the bpm i have set the property 'transport acknowledge' in every RFC i try to send to R3 backend. XI is waiting for the ACK but no ACK is arriving so i would like to 're-send' angain teh RFC.
Is that possible?
Regards

Problem with released transports

Hi All,
We have made changes to the existing query ( added two free charcteristics ) and collected it in a transport request.The query elements ( the free characteristics which have been added ) have both modified and active version in RSZELTDIR table.After releasing the request successfully into qualiy the changes are not getting reflected.The query elements are present only in the modified version but not active version.
We have one more similar issue.When we create a new query, include new query elements in the query and transport it to quality no entry is created for the query elements in the table RSZDELTDIR.
Could someone help me out in figuring out the problem?
Regards,
Shravani

hi,
Generally we face this error when the objects are not collected properly
check whether the query elements are collected into transport request or they are in temporary request/Package($TMP)
in your case i think they might have struck in temp request if it is so collect the query again in transport connection tab of RSA1 and check for the transport requests/package of the query elements
If they are in Temp right click on it and select change package and collect it again
Regards,
MADhu
Edited by: MadhuMarupudi on Aug 18, 2009 8:37 AM

Problem in XI transport

Similar Messages

Maybe you are looking for