Problem in XML Form Builder development
I am developing some KM Navigation iView template with XML Form Builder . I create a label , when it be clicked , relative files will be download to local PC. But the caption of the label is the complete path of the file, not "file down" which I expected.
I need help, Regards.
Sonal,
You can check
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/fe743c74fa6449e10000000a11402f/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee639033-0801-0010-0883-b2c76b18583a
James
Similar Messages
-
Problem starting XML Forms Builder
Hi
I have a SAP EP 6.0 SP2 Patch 28 portal where I newly implemented the how to guide "How To Secure Permissions fro Initial Content In SAP EP 6.0 SP2".
In this guide I need to create a new Content Manager role, due to a SAP Note 775117.
All this seems ok, but now I am not able to start the XML Forms Builder.
I am getting an error message that says something about the <b>"Access is denied:com.sap.portal.system/applications/com.sap.km.cm/components/xfbuilder - security zone:medium_safety/Com.sap.km.cm"</b>
I have tried out several ways, then the recommendation, of implementing to get this application to be loaded, but unfortunately - this does not work.
Have anyone else reach some problem regarding this issue??
Regards
Kay-Arnehi
navigate to systemconfiguration security Zone and to the folder as specified and change the security zone to low safety .also check with acl editor
With regards
subrato kundu -
Hi all,
Can any one provide me any document related to FAQ in XML Form Builder?
i have created one project in xml form builder but not getting how to create iviews at admin side and user side.
Thanks in advance!
sonal.Sonal,
You can check
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/fe743c74fa6449e10000000a11402f/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee639033-0801-0010-0883-b2c76b18583a
James -
Problem saving XML Forms builder project
Hello,
I have extended my xml forms project with some functionalities and now I'm not able to save and generate it. When I'm trying to save the project saving process stops while saving 'GUIModel-Internal.xml' which is quite big file (~4MB). I can't find the reason which cause that.
I would be grateful for any ideas.
Best Regards,
Michal MaciejewskiHi Fallon,
It was typicall extension with normal changes within the XML Forms Builder. I've added some nodes in Data Schema and then create some controls on Edit and Show form which I connected with the newly created nodes. I know that custom changes in .xsl file will be erased after opening and saving the project within the XML Forms Builder so I'm trying no to do that. Have you got any idea why the project is not saving properly? Is it possilbe that XML Forms Builder could damage some files of my project while saving? After several tries of saving Show form could not be load while opening project. It's quite urgent for me to find solution or cause of this issue.
Regards,
Michal -
I want to design a News like the *LInklist* by XML Form Builder
Hello:
Everyone!
Now I have another problem about XML Form Builder
I want to design a News like the LInklist by XML Form Builder
I want the result,For Example
SAP News
1news1
2news2
3news3
who can give me some adviseon about how to disign the Edit, Show and Renderlistitem in XML
Thanks a lot
Hope your help!Hi,
In XML Form
1) Edit form is used for designing the user interface.
2) Show form is used for displaying the xml form to the end user
3) RenderListItem is used for rendering the xml form into a small description like 1News1, 2news2 etc..
Here you need to display only the heading of the xml form
After you create the xml form
Create Layout set where you need to give the proerties like xml renderer form , no of items to display etc...
Thanks&Regards,
Raghu -
XML Forms Builder - problem with checkbox
Hi,
I have created many checkboxes in XML Forms Builder and if I want to create a new document based on this "Form" I have still checked one of checkboxes. I would like to have all empty checkboxes becasue user should check the appropriate checkboxes.
Do you know how to resolve this problem?
Thaks for help!
Regards,
Andrzej TabaraHi,
is it always the same checkbox that is already filled in? Is this ckeckbox based on a metadata-definition?
If yes: You could maybe have a look at the metadata-definition. Is there maybe a default-value defined?
Kind reagrds
Karin -
XML Form Builder-Problem with the save button
Hi All,
I created a project in XML Form Builder.
I included a button "Save" in my project.
All is working fine when i preview my project in XML Form Builder.
The problem is when i run my project with iview.
I suppose the form to save my input and then to be closed but
unfortunately it did not.
I don't know where the problem is as in the XML Form Builder everything seems ok.
Thank you for your help!
Regards,
AriHi Carsten,
Thank you for your help.
There is no javascript error in the form.
In the status bar when i have my mouse over the button i can see "javaxcript:HrefSubmit('save',"");"
And when push the button "Transering Data..."
I created the form in the Xml Form Builder and in preview there the project works.
What do you mean "Did you access your Form using the KM Admin Explorer via a comman?"
How can i have acess there?
I appreciate you help!
Regards,
Ari -
XML Forms Builder Errors after SP Stack 14 upgrade
Hello,
I upgraded development portal to NW04s SPS14 (from SPS11).
In XML Forms Builder, try to open my existing project but not succedd. I get the message "Operation Timeout".
"The current operation timed out and was aborted. This was caused by network communication problems . Some data may have been lost.try again later"
After click cancel, I get a second message:
"There are no projects stored on the server"
In KM content, etc folder, xmlforms , I can see all my projects !!!
Of course, no network problems exists.. portal is working ok, ...
I applied OSS note 1150307 - "Internal Server Error when accessing XML Forms Builder" but I have the same problem.
Any idea¿?
Thanks and Regards
Noemí LlanoHello, I did a test...
from the same client machine ...(with JRE 1.6.0_03) I start XML Forms ....
with SPS11 portal, I can see the Projects.
With SPS14 portal, I can not see the projects
Thanks and Regards
Noemí -
Error writing output with iview for xml form builder
Hi,
I created a Xml Form Builder's project in which I developed an "Edit" and "ListEdit" sheet.
I also created an iview for theese in which the code link is:"com.sap.km.cm.xmlform",and the field for Style Sheet for List and for single item are set up correctly,but when I tried the preview the following error message happened:
com.inqmy.lib.xsl.xslt.XSLOutputException: Error writing output. -> org.w3c.dom.DOMException: Root Element is already present, cannot be appended as a child.
could someone help me?
thank's a lot!
Nick.Hi,
Now I'm confused,what do you mean with create new data? Are users editing existing documents
(as if they go to a document example.xml > edit) or they are creating new documents (as if they go
on folder > new > forms)?
The problem is, in both cases a user would need read/write permissions.
The normal flow content (data) is created in KM is as follows:
1. user is assigned to a role
2. role contains KM Navigation iView
3. KM Navigation iView executes com.sap.km.cm.navigation component
4. user chooses New > Form UI command (edit_xml_forms)
5. edit_xml_forms UI command executes its code (com.sapportals.wcm.rendering.uicommand.cm.UIXMLFormsCreateCommand) and open xml edit for the user
6. user fill the form and click Save, form is created into folder
For what I understood so far, your requirement basically asks you to go directly to step 5, it is
possible to pass a URL that goes directly to step 5, the UI command button, but if you do that
you won't have a context, so chances that it will work are slim, since a context is required to
fill the parameters asked by the app (like folder, user, permissions, etc). Even though, in some cases you can
still pass the parameters via post in the URL but you must know which service/parameters the
app asks for it, also a URL is static...
That was the create scenario, I think it's more cons than pros, users would still be
able to bypass the URL iView created for that, I'd suggest evaluating again if it's really
a problem having users access cm to manage data
kind regards,
Rafael -
In XML form builder data schema not clickable
Hi ,
I have installed JRE version 1.6.0_07. When i click on xml foms builder ,it gets opened but when i click on data schema it's not clickable but icon is displayed next to data schema.I am not able to create any node in data schema.
Regards.
Adity.Hi,
my problem is simular to Aditys: My Java Version is JRE 1.6.0_15. When I go to Content Managment --> Formbuilder, the XML Forms Builder starts automatically but it is not possible to open Data Schema. After downgrade to Java 1.4 I can not start the Form Builder, that means, after clicking on "Form Builder" in the Portal, a pop-up opens, but the XML Form Builder does not load.
Can you help me?
Jannis -
Hi,
i have created one xml form using form builder...there are three views..edit, renderer list and show....then in portal, i created one iview using newsexplorer layout set for edit form and newsbrowser layout set for show form . My problem is...wich layout set i have to choose for getting rendererlist form? one more thing, before creating iviews, should i have to create any folder in km repository ? i am using ep 6 sp2.
regards
ramHi ram singh,
There are some steps that you could follow :
1. Create the XML FORMS using the XML FORMS Builder
a) On Edit panel create your form that will be visible on NewsExplorer Layouset.
b) On RenderList create how your form wil be visible on NewsBrowser Layouset.
2. Create first Iview for Admin:
a) Set the layouset to "NewsExplorer"
b) Set the "Path to Initially Displayed Folder" to "/MyFolderForXMLFORM"
c) Set the "Path to Initially Displayed Folder" to "/MyFolderForXMLFORM"
3. Create second Iview for users:
a) Set the layouset to "NewsBrowser"
b) Set the "Path to Initially Displayed Folder" to "/MyFolderForXMLFORM"
c) Set the "Path to Initially Displayed Folder" to "/MyFolderForXMLFORM"
That's all! Now you can create new items using the Admin iView, which will be storage on KM path that you had set on steps 2 and 3. When you open your User Iview will be show all xml files that exists on your "/MyFolderForXMLFORM".
<b>There are some helpful links above:</b>
How to create XML FORMS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee639033-0801-0010-0883-b2c76b18583a
Creanting XML FORMS
http://help.sap.com/saphelp_nw04s/helpdata/en/fd/bd016254946048a4d7a17c2aad7600/frameset.htm
Cheers,
Alcides Flach -
Anonymous access to XML Form Builder file
Hi to all
I create a XML Form Builder project to create a method for news publishing.
I use an KM navigation iview tath containing XML file.
If i authenticate me on the portal i view all correctly.
the problem is with anonymous user, the portal required me autentication.
I setting the folder permission where the XML file is stored.
I setting the permission for the KM Document Iview.
I view correctly image, html file, ecc with anonymous user.
PLEASE help me.
Thanksthanks for your answer but i have the error:
com.sapportals.wcm.repository.InvalidUriException: Invalid RID: .xml
at com.sapportals.wcm.repository.ResourceException.fillInStackTrace(ResourceException.java:399)
at java.lang.Throwable.(Throwable.java:195)
at java.lang.Exception.(Exception.java:41)
at com.sapportals.wcm.WcmException.(WcmException.java:59)
at com.sapportals.wcm.util.content.ContentException.(ContentException.java:38)
at com.sapportals.wcm.repository.ResourceException.(ResourceException.java:162)
at com.sapportals.wcm.repository.InvalidUriException.(InvalidUriException.java:48)
at com.sapportals.wcm.repository.runtime.CmAdapter.findRepositoryManager(CmAdapter.java:1599)
at com.sapportals.wcm.repository.runtime.CmAdapter.findManagerAndResource(CmAdapter.java:1322)
at com.sapportals.wcm.repository.runtime.CmAdapter.getResourceImpl(CmAdapter.java:979)
at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:192)
at com.sapportals.wcm.service.xmlforms.utils.ResManager.getResourceImpl(ResManager.java:272)
at com.sapportals.wcm.service.xmlforms.utils.ResManager.getResource(ResManager.java:112)
at com.sapportals.wcm.service.xmlforms.transformation.Transformation.render(Transformation.java:199)
at com.sapportals.wcm.app.xmlforms.PreviewServlet.sendForm(PreviewServlet.java:165)
at com.sapportals.wcm.app.xmlforms.PreviewServlet.doGetAction(PreviewServlet.java:130)
at com.sapportals.wcm.app.xmlforms.XFBaseServlet.doGet(XFBaseServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.app.xmlforms.XFBaseServlet.service(XFBaseServlet.java:134)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:331)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534) -
XML Form Build Error Unexpected http response code 500: Internal Server Err
Hi
I have the following error message when i am trying to load XML Form Builder
"Unexpected http response code 500: Internal Server Error "
When i am trying to Run the test its shows me the follwoing error log.
Test Environment: XML Forms Builder Environment Check *
Start Time: 2008-09-17 15:09:53 *
End Time: 2008-09-17 15:09:59 *
- Test: Java Environment
- OK
- Start Time: 2008-09-17 15:09:53
- End Time: 2008-09-17 15:09:53
- Java Runtime Version is 1.6.0_02
- Test: Connection Tests
- ! Test Failed !
- Start Time: 2008-09-17 15:09:53
- End Time: 2008-09-17 15:09:59
- A test in the suite failed
- Test: Download XML Forms Builder Jar
- OK
- Start Time: 2008-09-17 15:09:53
- End Time: 2008-09-17 15:09:55
- Successfully loaded XML Forms Builder Jar from http://zhmscad8.whirlpool.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/km.appl.xmlforms.xfbuilder_core.jar, Version 6.4.1
- Test: Download SAP XML Toolkit Jar
- OK
- Start Time: 2008-09-17 15:09:55
- End Time: 2008-09-17 15:09:59
- Successfully loaded SAP XML Toolkit Jar from http://zhmscad8.whirlpool.com:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/etc/xmlforms/sapxmltoolkit.jar
- Test: XML Forms Builder Version
- ! Test Failed !
- Start Time: 2008-09-17 15:09:59
- End Time: 2008-09-17 15:09:59
- Unexpected http response code 500: Internal Server Error
- Test: Load Global Settings
- Not Started
- This test depends on the test "XML Forms Builder Version", which did not complete successfully
- Test: Load Project List
- Not Started
- This test depends on the test "XML Forms Builder Version", which did not complete successfully
Please let me know the how to slove this Problem.
Thanks
Mmukesh
Edited by: mmukesh reddy on Sep 17, 2008 9:29 PMHi Koti Reddy
That is not related to my issue.
Here this error only comming for two users in my group.
The environment every thing working for remaining user. But only that two users are facing the problem.
So please let me know is there any security issues.
Thanks
mmukesh -
Behavior of XML Form Builder after SP 13 upgrade
Dear Experts,
We are working on E.P 7.0 SP 10 and we've recently applied SP 13 and started testing the system.
What we found on XML Form Builder is, we are unable to add schema (under Data Model) to the project.
Can some one help us where exactly went wrong.
Best Regards,
SatyadevHi,
i think, i have faced the same problem recently.
I had the problem that i saw the 3 categorys: namespace,data schema and properties.
But i couldn't open them by clicking on them. This is also your problem?
What i did with lots of hours of testing.
1.Once you have managed to add something to the data schema you are fine. Then it will always be opened. ( Try opening an existing project and you will see that.)
So you could open an old project and modify this.
2. It is still possible to open the Data Schema. I don't know where to click exactly but i click like 100s of times on the symbol of Data Schema and with a little bit of luck it opens. If it doesn't work, i restart the Forms Builder and i try again.
Regards,
Marcus -
Hi,
I have an news application to be developed in XML Form Builder. I am creating News Author part of it. It has an Date field where i have to do an validation like the user cannot enter date less than the current date. I can perform simple data type validation through the form builder. Can I perform the above said validation in XML form builder or is there an work around in getting this done.
Thanks in advance
Regards,
Ganeshhi,
I opened the schema of this particular application in the KM. I edited the tag for the particular application and included my restriction, so that the validation could occur. I did the same for string field in restricting the no of characters and found to be sucessful. But the same doesnt work for date field...
The tag goes like this
<element name="ExpiryDate" default="" minOccurs="1" maxOccurs="1" type="date" ns="default"><simpleType><restriction base="date"><minInclusive value="01/01/2009"/></restriction></simpleType></element>
Usually you dont have this restriction.....I have added the tag in bold.....But still validation doesnt occur.....What is the format in which date is stored????
The same worked for string field as shown below. I can restrict the entry to just 5 characters depending upon the restriction, I make in the schema.....
element name="Courtesy" default="" minOccurs="1" maxOccurs="1" type="string" ns="default"><simpleType><restriction base="string"><maxLength value="5"/></restriction></simpleType></element>
How can i apply the same to date field???
Any inputs from Consultants worked in Form Builder??
Thanks & Regards,
Ganesh N
Maybe you are looking for
-
I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?
-
Problem in downloading to excel sheet
hi, i have a file in the application server which needs to be downloaded into excel sheet and send it via attachment to outlook id's.. file is getting downloaded into excel sheet ( Via custom function module) and the attachment is being sent to the m
-
Error -- ISO8859_1 Not Supported in Weblogic 6.1 SP2
I've installed Weblogic 6.1 Service Pack 2 on Solaris 8, and when I go to install and deploy and applications (including the Petstore Demo) I get an error message which says 'ISO8859_1 is not supported'. If I stop and then restart the Weblogic Server
-
Verification field for Batch number - Transaction LM05
Hi Experts, Can some one help on the issue of adding a verification field for BATCH NUMBER on the screen 2502 and make it work. Requirement : Add Verification field for batch number and build the logic to verify the batch number - as the SAP standar
-
Getting WWC-50003 after upgrading from 10.1.2 to 10.1.4
after upgrading from 10.1.2 to 10.1.4, I no longer can create any portlets from "Additional Portlet Builders" such as Calendar, Chart, Hierarchy, etc. When I try to define the portlete, I get WWC-50003 error msg. I have opened SR with Oracle and they