Problem in Z2 screen

Hi everybody ,
I don't know if this is the right place to post this problem but I didn't know where to go
I bought Sony Xperia Z2 recently (about 3 weeks ago) , yesterday I noticed a very small white dot on the right side of the screen , it is very very very small and not noticeable , I only noticed it on black background while using the phone in the dark ,
A friend said that it is called a dead pixel , but I used to think that a dead pixel color must be black
Another friend said that this happened because I was using phone on max brightness (without using 'adapt to lighting conditions) , I only did this two or three times for testing , does this really cause this problem ??
anyone have any idea what is this and is there any solution , and may this happen again in the future ??
thanks in advance

Contact your local Xperia Care to get your phone inspected http://support.sonymobile.com/global-en/contactUs/

Similar Messages

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

Problem with Variable screen in WAD

Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
Abraham

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

Apple service centre employee told me that they do not have this 14 day offer in India.
And My mac book pro is taken in by Service centre people to run test etc and I will be informed the next day if they accept it as a fault or not ?
I feeling ridiculously bad.

I bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly . Can anybody help.

i bought an new ipad 3rd gen 16 gb wifi cellular in may 2012. I hv a unique problem wherein the screen of ipad is not as smooth as what is general experience. Its not buggy but lacks smoothness and finger doesnot glide as smoothly .Can anybody help.

Do you clean your iPad screen? Do not use standard window cleaners, with ammonia or alcohol, like Windex, but a damp towel, followed by a micro-fibre cloth is recommended. There are also cleaners you can buy which are specifically designed for iPad/iPhone devices, such as iClean from Monster.

Problem in Selection Screen.

Dear Experts,
I am facing a problem in Selection Screen.
I have 2 radio buttons ,
Radio Button 1 - Choosing the file from desktop and
Radio Button 2 - Executing from Database
Under Option1 - i have a FILE parameter which is Mandatory.
Problem Case -
when I choose option 2, Option 1 should be disabled. in the sense the file name which is mandatory here should not be mandatory . Currently, when i choose option 2 - i have to provide some dummy characters in the file parameter because the file parameter is mandatory, and I want to avoid this.
Please see the entire code .
REPORT ZTEST.
DATA: LV_FILE_PATH(20) TYPE C.
DATA: LV_MASK(20) TYPE C VALUE ',*.XLS ,*.XLS. '.
*-- Macro to put radiobutton on selection screen
*-- &1 - radiobutton parameter name
*-- &2 - text element (description)
*-- &3 - radiobutton group
DEFINE MAKE_RADIOBUTTON.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: &1 RADIOBUTTON GROUP &3.
SELECTION-SCREEN COMMENT 3(60) &2.
SELECTION-SCREEN END OF LINE.
END-OF-DEFINITION.
SELECTION-SCREEN BEGIN OF BLOCK A0 WITH FRAME TITLE T000.
* From Config File
MAKE_RADIOBUTTON RB_1 ALL_DATA SRC.
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE T001.
* Config file from Presentation server
PARAMETERS: P_FILE1 LIKE T390D-DBNAME OBLIGATORY. "
SELECTION-SCREEN END OF BLOCK A1.
* From database table
MAKE_RADIOBUTTON RB_2 INC_DOWN SRC.
SELECTION-SCREEN END OF BLOCK A0.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE1.
CALL FUNCTION 'WS_QUERY'
 EXPORTING
 QUERY = 'CD' "// Current Directory
 IMPORTING
 RETURN = LV_FILE_PATH.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 DEF_FILENAME = 'TA_DOWNLOAD.MDB'
 DEF_PATH = LV_FILE_PATH
 MASK = LV_MASK
 MODE = 'O'
 IMPORTING
 FILENAME = P_FILE1
 EXCEPTIONS
 INV_WINSYS = 1
 NO_BATCH = 2
 SELECTION_CANCEL = 3
 SELECTION_ERROR = 4
 OTHERS = 5.
INITIALIZATION.
ALL_DATA = 'From Desktop : ? '.
INC_DOWN = 'From Database : ?'.
T000 = 'Configuration Upload'.
Please help
Thanks

Hi
You should do some modifications like these:
DEFINE MAKE_RADIOBUTTON_1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: &1 RADIOBUTTON GROUP &3 USER-COMMAND &4.
SELECTION-SCREEN COMMENT 3(60) &2.
SELECTION-SCREEN END OF LINE.
END-OF-DEFINITION.
DEFINE MAKE_RADIOBUTTON_2.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: &1 RADIOBUTTON GROUP &3.
SELECTION-SCREEN COMMENT 3(60) &2.
SELECTION-SCREEN END OF LINE.
END-OF-DEFINITION.
SELECTION-SCREEN BEGIN OF BLOCK A0 WITH FRAME TITLE T000.
From Config File
MAKE_RADIOBUTTON_1 RB_1 ALL_DATA SRC AAA.
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE T001.
Config file from Presentation server
PARAMETERS: P_FILE1 LIKE T390D-DBNAME MODIF ID FIL. "
SELECTION-SCREEN END OF BLOCK A1.
From database table
MAKE_RADIOBUTTON_2 RB_2 INC_DOWN SRC.
SELECTION-SCREEN END OF BLOCK A0.
AT SELECTION-SCREEN OUTPUT.
IF RB_2 = 'X'.
 LOOP AT SCREEN.
 IF SCREEN-GROUP1 = 'FIL'.
 SCREEN-ACTIVE = 0.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
Max

Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

Problem: Cracked glass screen (iPhone 4)

Problem: Cracked glass screen
Condition: my iPhone is less than 2 mos old.
Question: Totally aware that the warranty excludes damages due to accidents etc. but its freakin a month and a half old! Could it be repaired free of charge or for a cheaper cost? or replaced?!

What does its age have to do with being broken?
What is the difference between breaking a new iphone vs and old one? You broke it.
You can look for a third party repair facility (voids the warranty) to see if they are cheaper.
Apple will charge $199 in the U.S.

Problem with sub-screen actions on Cancel button

Hi all,
I have a problem with sub-screen.
I created a subscreen (screen sequence in MM01/MM02/MM03). When users leave this screen, I call POPUP_TO_CONFIRM to ask if they want to save the data.
1) My goal is: when they choose Cancel, no actions are performed and users will see the current screen. However, I cannot use command: SET SCREEN 0 or LEAVE TO SCREEN 0 because the system gives an error message:
*SET SCREEN not allowed in subscreens*.
2) How can we determine when the user leaves the screen? which value of SY-UCOMM will be used to check this?
Thanks in advance.

for dis SET SCREEN is not required.
Consider d code given below as n eg:
CALL FUNCTION 'POPUP_TO_CONFIRM'
 EXPORTING
 titlebar = 'SAVE'
 text_question = 'SOME _QUS'
 text_button_1 = 'YES'
 text_button_2 = 'NO'
 default_button = '2'
 display_cancel_button = ' '
 IMPORTING
 answer = l_ans
 EXCEPTIONS
 text_not_found = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE e066.
ENDIF.
IF l_ans EQ '1'. " when yes is pressed
 MODIFY db.
 commit work.
 leave program.
ELSEIF l_ans EQ '2'. "when no is pressed
 leave program.
ELSE. " when cancel is pressed
ENDIF.
In above module when Yes is pressed it saves data den leave prog.
As no action is specified for cancel button it will remain on that screen only from which popup is called, in this way ur problem can be solved.
Reward properly.

Has anyone else got an oil slick problem on their screen?

I seem to have a problem with my screen, it seems to have an oil slick similar to what galaxy tabs have. Does anyone else have a similar problem and is it covered under the standard warranty for iPads?

I hadn't heard of this oil slick problem on the Galaxy Tab, but I just googled it and found some videos. If your iPad does that, it should be covered under the standard warranty, as long as it's not the result of you somehow misusing the device, dropping it, submerging it in water, etc. Take it to the nearest Apple store or authorized center.

Problem with SAP Screen

Not sure if this is the correct forum.
Okies, a user of mine has a problem with her SAP screens. It seems that she can't view the full screen of CJ20N She has to drag the window bigger to be able to see the content. She uses this window in a split monitor view, i.e. some of the applications are displaying on the laptop window while other applications display on the monitor.
Details of her SAPGUI:
Release 640 Final
File version: 6404.4.16.1015
Build: 774474
Patch Level : 16
Do note that her primary monitor (notebook) is always set to 1280x800 and the secondary monitor is set to 1024x768. Anyone encounter this problem before?

Hi,
This is problem with windows screen resolution. Better to use, maximum supported window size and make sure to use same size for both the screens.
Regards,
Ganesh

Problem with matrix/screen in Qosmio F55-Q502

Hello
For a few weeks I have strange problem with matrix/screen in my laptop.
The matrix flickers very often - no matter if power cable is plugged or not.
The screen is full bright and suddenly it starts to blink - it is getting darker, than lighter, usually for few/dozen seconds. It does it when nobody touches it or when I work on it.
It very annoying and making eyes tired - it does it very quickly and there are few levels of screen brightness.
Moreover sometimes the screen turns off - You can see what is on desktop but the screen is very very dark (but not blank or completely switched off). It happens without any reason - sometimes just in the middle of working, sometime for example when I touch (not pull) the power cable between laptop and power supply.
Then, the only way to get back to normal brightness of screen id to close the lid just for half a second and open it
- matrix lights then normally, but can "turns off" moment later and I must do it once again - sometimes even few times..
After "action" with lid screens seems like nothing ever happen..
Does anyone have idea what is the cause of such behaviour or how to diagnose it in details?
Or maybe solve this problem?
Best regards
300m

Sounds like the Backlight or Inverter is failing or there is a loose connection.
Is the unit under warranty? Send it to an ASP for repair.
You should avoid repairing it yourself, the backlight is very high voltage!

X220:Graphics problem with full screen videos

I have got my X220 laptop last month. I am facing problem while playing youtube videos full sceen.
videos can be seen best with smaller window but there is major graphics problem with full screen.
Can someone help on this?
I am using Windows 7 Enterprise edition.
Thanks

what do you mean by major graphics problem, please elaborate.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Problem with Full Screen

Ok I am getting problems with full screen graphics on some computers.
I am writing an internet based RPG and this is really eating into my time...
Can any one explain why my graphics will not show some times (works others) with the exact same code running....
I am using a BufferStratagy with a frame.
Any help would be gladly apreashiated thank you in advance,
Phibred

Not a thread issue, no thread on this side of the program and yes there is a media tracker. However I have learned that my problem was that my screen does not like to flip to 800x600 for java applications for some reason thx any way.

With the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

We are users here. We cannot possibly know when a new update will be available.

Problems with share screen in lion

Hello
I have had problems with share screen since i have installed Lion. I can't share screen even inside the Lan, between Macs and between Mac and Iphone. It's like Lion would had some port block in any hidden place. Anyone knows something about it?

FINALLY! Got Screen Sharing to work! REPLACE ARDAgent (v3.5.1) with the older v3.4
Instructions by tchaga:
1. Download ARD 3.4 (http://support.apple.com/kb/DL1350 RemoteDesktopClient.dmg), mount it, look inside the package/Contents, copy the Archive.pax.gz to the desktop
2. Expand the Archive.pax.gz and navigate inside the resulting folder Archive to /System/Library/CoreServices/RemoteManagement
3. Navigate to the same folder at the root of your HD (i.e. HD/System/Library/CoreServices/RemoteManagement)
4. Copy ARDAgent from your HD/System/Library/CoreServices/RemoteManagement to the Desktop and then delete it from the HD/System/Library/CoreServices/RemoteManagement folder (you need admin password).
5. Copy ARDAgent from Archive/System/Library/CoreServices/RemoteManagement to HD/System/Library/CoreServices/RemoteManagement (you need admin password again).
6. Restart

Problem in Z2 screen

Similar Messages

Maybe you are looking for