Problem inporting raw files from my Nikon D3200

i have problems importing raw files from my Nikon D3200, i have tried some of the suggestions such as
removing the RawCamera.bundle and RawCameraSupport.bundle from the System Library and downloading a newer version (OS X Yosemite: Supported digital camera RAW formats - Apple Support)
The problem is  --  the latest RAW Compatibility Update version for Yosemite 6.02 appears to be the one I currently am using (in my System Folder).
In that same article referenced above, my Nikon D800 is listed in an earlier version simply titled "Supported by Yosemite 10.10".
This had some success but is not working after trying it several times, i am currently on version  OSX Yosemite 10.10.1 and the version of iphoto is 9.6
any help would be greatly received as i only shoot in Raw

Remove the RawCamera.bundle and RawCameraSupport.bundle again and update the system to 10.10.2 via the App Store.  That contains the bundles that will support that camera: OS X Yosemite: Supported digital camera RAW formats - Apple Support.  The 6.01 and 6.02 updates are not needed for that camera. Be sure to repair disk permissions after the update.
As usual be sure you have a backup of your hard drive before applying any such update.

Similar Messages

  • Cannot open raw files from my Nikon D3200 in Elements 11

    After I found I could not open raw files from my new Nikon D3200 in Elements 10, and did a couple hours of searching the web site, I upgraded to Elements 11. Elements 11 also will not open the raw files from the D3200

    I found the solution in a Light Room forum.  The problem was I was using an older version of View NX2 to transfer the files. I uninstalled that version and installed the version supplied with the D3200. The files now load into Elements 11 with no problem. Apparently the old version affects the content of  the NEF files, as Elements was not able to recognize them, and gave an error message that the files were from an unsupported camera.
    Thanks for looking into this, Don Rieser  

  • I can not load RAW files from my nikon d810

    I Have a problem Reading RAW files from my nikon d810

    Thanks,
    Joop
    Op 26 jul. 2014 om 17:40 heeft Rikk Flohr <[email protected]> het volgende geschreven:
    I can not load RAW files from my nikon d810
    created by Rikk Flohr in Photoshop Lightroom - View the full discussion
    https://forums.adobe.com/search.jspa?q=D810
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6585986#6585986
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Problems loading raw files from Nikon D750 to lightroom4

    problems loading raw files from Nikon D750 to lightroom4. Any thoughts?

    This is a recently produced model so raw support was only added in LR 5.7 / ACR 8.7, updates to LR 4 ceased about two years ago when LR 5 was issued.
    Options a.) Upgrade to LR 5.
    b.) Utilize the latest Adobe DNG Converter 8.8 to convert the nef files to dng format then you will be able to import the dng files into LR 4.

  • Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?

    Why I cannot open raw files (NEF) from camera Nikon D3200 through Adobe Bridge and/or Photoshop ?

    Thanks for the tip. It worked out perfectly.
    De: ssprengel [email protected]
    Enviada em: terça-feira, 14 de janeiro de 2014 19:14
    Para: Aecio Paes Leme
    Assunto: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
    Re: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
    created by ssprengel <http://forums.adobe.com/people/ssprengel>  in Adobe Camera Raw - View the full discussion <http://forums.adobe.com/message/6012775#6012775

  • I recently purchased a Mac 0S X 10.6.6 which was an upgrade from the Mac OS 1.4.1.1  I downloaded the adobe ph otoshop CS2 which I had on my old computer and now it cannot read my NEF files.  Which is a RAW file from my Nikon.  Can anyone help...please?

    I recently purchased a Mac OS X 10.6.6 which was an upgrade from my Mac OS version 10.4.1.1  I downloaded the Adobe Photoshop CS2 which I had on my old computer and now it cannot read my NEF files which is a RAW file from my Nikon D200.  I did not have this problem on my old Mac.  I always shoot RAW and can't open any photos.  Can anyone help me PLEASE?!? 

    Do you have access to another Mac to see if the disk can be read by it?  If it can't then you're pretty sure it's the disk. If it can then there may be issues with your optical drive which might be cleared up by using a cleaning disk on it, one that uses dry brushes (no liquid).
    If you have access to another Mac and it can read the iWork disk make a disk image of it so you can move the disk image to your iMac and install from the disk image.
    OT

  • RAW files from my Nikon Df (NEF) will not display in Lightroom. Same format from Nikon D300s works. Camera firmware is current. Df RAW (NEF) files display in Nikon software products, not in Apple software (Aperture or iPhoto).

    RAW files from my Nikon Df (NEF) will not display in Lightroom. Same format from Nikon D300s works. Camera firmware is current. Df RAW (NEF) files display in Nikon software products, not in Apple software (Aperture or iPhoto).

    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    The above list show the current camera models supported by Adobe Camera Raw (plugin for PS CC) and Lightroom 5.3.
    You will see that the Df Raw support was provided in the latest version of LR 5.3.   Support for the D300s was introduced in LR 2.5. (the NEF files are different.)
    Lightroom and Adobe Camera Raw can only be updated after the camera manufacturer has produced the camera and made it publicly available. If you are using an earlier version of Lightroom then that is your problem.
    Please post details of the version you are using at present.

  • Will Photoshop Elements 11 and Lightroom 4 support conversation of RAW files from a Nikon D800?

    I'm currently using Photoshop Elements 9 and must convert RAW files from my Nikon D800 to .dng files before processing using a added converted.  I'm considering upgrading to either Elements 11 or Lightroom 4 but want to know if either of these programs will support the nikon D800 RAW files without having to go through this extra cumbersome step.   Additionally, if I do go with Lightroom 4, will the transition be easy or difficult and what problems might I encounter?

      Yes the D800 is fully supported in both applications.
    You would certainly benefit in processing your 36mp raw files using Lightroom if you have a 64bit PC or Mac with additional memory (RAM). The Lightroom develop module is where you do all the editing and you get the benefit of the full CS6 raw engine in an intuitive interface.
    If you regularly use the Elements Organizer you should understand Lightroom quite easily.
    Why not download the free trial of LR4 and test for 30 days.
    http://success.adobe.com/en/uk/sem/products/lightroom.html?kw=p&skwcid=TC|23077|lightroom| |S|b|21212135254
    P.S.
    There is a good video tutorial from Adobe’s Julieanne Kost - Create Stunning Images.
    http://tv.adobe.com/watch/getting-started-with-adobe-photoshop-lightroom-4/lightroom-4-cre ate-stunning-images/

  • Neither LR nor PS CC will recognize raw files from a Nikon D5500 camera, although it is indicated as being supported.

    Neither LR nor PS CC will recognize raw files from a Nikon D5500 camera.

    Drostow wrote:
    I have been using Photoshop CS5 with no problems.  I just bought a Nikon D600 which is not supported by CS5.  I heard that Lightroom 4.2 will support it so I shelled out $199 for that product.  Now I see that if I import a raw file into LR, work on it and then try to send it to PS for more editing I can't do that.  I am told I have to spend another $199 to upgrade to CS6 because Adobe has no plans to have CS5 support my camera.  This is a rip-off.
    Uh...no...you are wrong.
    CS5 can open D600 files if you convert the D600 files using the free DNG Converter 7.3 RC which is available at labs.adobe.com (note DNG Converter 7.2, ACR 7.2 and LR 4.2 offer preliminary support). LR 4.3 and ACR 7.3 RC (both are release candidates hence the RC category) can deal with D600 raw files directly. If you process the D600 file in LR 4.3 RC, you can open that image in CS5 if you render the image in Lightroom 4.3 RC.
    Yes, Adobe will no longer update CS5.x because Adobe started shipping CS6. It's Adobe's policy to cease support for versions of Photoshop that is no longer shipping–Adobe is now shipping CS6. It ain't a rip-off, it's the standard Adobe policy to support CURRENT customers, not former customers.
    You really need to catch up bud...software and new cameras change all the time. Buying a new cameras generally means you'll need to update your software. Foolish you for not knowing that. All of this could be mitigated if Nikon and Canon (and the other main camera brands) adopted some sort of raw file format standards...sadly, they don't which allows people who fail to grasp the reality of the situation to blame Adobe.

  • How can I open raw files from my Nikon D7100 in CS4 or CS5?

    How can I open raw files from my Nikon D7100 in CS4 or CS5?

    Andy,
    In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
    Upgrade the host program version
    Use another host program, such as PsElements or Lightroom
    Use the free DNG converter, per Curt's suggestion. That is not host program dependent
    Glad that the DNG Converter works for you.
    Good luck,
    Hunt

  • Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

    Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

    Yes, I see:
    Letzte Aktualisierung
    16.04.2012
    The link I gave is listed in the faqs of this forum.
    Photoshop Elements FAQ List
    mfG
    Michel

  • My computer can't read raw files from my nikon d4s in Photoshop cs6

    Hello,
    i have a MacBook Pro and have Os X 10.8.5 installed
    Photoshop CS6 can't open the raw files from my Nikon D4S.
    I tried to install Adobe CameraRaw 7.1 but keep getting error messages. ALso tried to install the patch to no avail.
    Any suggestions?
    Thank you

    ACR 8.4 provides support for the Nikon D4s, and there is now ACR 8.6 for Photoshop CS6.
    Get it here: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
    Gene

  • Problems loading RAW files from Canon 6D in Elements 10

    Elements 10 - Windows: I have been using the software for a couple of years and never had a problem loading RAW files from my Canon T2i ir 60D, however I just purchased a Canon 6D and when I try to load a RAW from the 6D I get Cannot open 'C:\User...CR2' because it is the wrong type of file.  I thought cameraraw 6.5 patch would be the fix but when trying to install I get "Error loading Updater workflow"

    Will the DNG files perform the same, meaning will I retain all the information that makes RAW important for processing?
    Yes. That's why DNGs were invented. Adobe has put a lot of work into the DNG format for this very reason.
    Raw files are proprietary and manufacturer specific. Raw formats change with every make and model of camera. Software must be updated for the new Raw format of every single camera. Adobe does an admirable job of upgrading Camera Raw for every new camera.
    DNG is also a Raw format but it's open source and works in any software which can read the DNG format. If camera manufacturers used the DNG format instead of their own Raw format, you would not have to upgrade Elements 10. But they don't, and probably never will, so you must upgrade the Camera Raw plugin (and therefore Elements 10 since it's not compatible with the new Camera Raw) to read the new Raw format from the 6D or add another step to your workflow with conversion to DNG first.
    See
    http://photographylife.com/dng-vs-raw
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • I am trying to convert raw files from a Nikon D7100 on CS5 extended. Will the RAW converter 7.4 work on CS5 extended?

    Will Raw converter 7.4 work with CS5 extended? I am trying to open a raw file from a Nikon D7100.

    You can get the free Dng Converter here:
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
    This video explains how to use it.
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • When I try to import raw files from my nikon d600 I get the message Unsupported image format, When I try to import raw files from my nikon d600 I get the message Unsupported image format

    When I import raw files from my Nikon D600 into Aperture I get a tryangle sign with "unsupported image format"

    Latest Adobe DNG converter (7.2) DOES indeed convert NEF pictures coming from a D600.
    Head up to Adobe's website and download the app.
    You'll only miss the focus information (focus distance and focus sensors used), but you'll be able to work with raw and not rely on jpg only!

Maybe you are looking for