Problem inserting video into a page

Hi, I have a page created using a custom page layout that I created.
I tried using the Video page field but when I configure the video, with youtube url it doesn't work. here is the url I used,
https://www.youtube.com/watch?v=v6yvW66-ThI&feature=player_embedded and https://www.youtube.com/watch?v=v6yvW66-ThI both won't work It gives message at the bottom saying loading of video failed.


I then tried inserting into a Page Content section. I clicked on the Insert tab, click "Video and Audio" then "Embed". I then paste the following code into the dialog. The video loads and I click the Insert button. In
Edit mode I can see and play the video. I click to save the page and the video disappear. I click to edit the page again and the video snippet code I pasted earlier is gone. <iframe width="510" height="340" src="//www.youtube.com/embed/v6yvW66-ThI?feature=player_detailpage"
frameborder="0" allowfullscreen></iframe>



<div id="ctl02_label" style="display:none">Course-Finder</div><div
id="ctl02__ControlWrapper_RichHtmlField" class="ms-rtestate-field" style="display:inline" aria-labelledby="ctl02_label"><div align="left" class="ms-formfieldcontainer"><div class="ms-formfieldlabelcontainer"
nowrap="nowrap"><span class="ms-formfieldlabel" nowrap="nowrap">Course-Finder</span></div><div class="ms-formfieldvaluecontainer"><div class="ms-rtestate-field">Course-Finder
field value. Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute
irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.</div></div></div></div>


Thank you.

Thank you for the link. I read it over a couple of times but it says youtube doesn't work. I checked the Site Setting ->HTML Field Security and youtube.com is in the allowed iframes list. Below is from the link
Using the "Embed Code" dialog
When editing a HTML field, there is now a new button available on the ribbon called "Embed Code" in the "Insert" tab. As the <iframe> code is inserted, the dialog tells you that the content will be inserted in a web part. YouTube didn’t work because they
prevent display in an iframe due to security reasons but Bing did.
One thing is that we're Intranet site so it has to be https but in the snippet editor of embedded code the video is loaded and plays. It just disappear after I save the page.
Anyway to get youbute iframe to work using either embedded code or in Edit Html source in a SP publishing site page?
Thank you.

Similar Messages

Problems inserting video via ms word

Hi
I am trying to insert video into ms word for Acrobat Pro Extended as per the instructions below.
When I get to point three I get a message:
AdobePDFmakerX Library not registered.
Screen shot shown in the attached file.
Any ideas?
Thanks
Ken
Insert video into Word, Excel, and PowerPoint files
Acrobat Pro Extended adds a feature to Office that enables you to add video in FLV or SWF format to an Office document. Video that is created in other formats is converted to FLV format when it is added.
After adding a video to an Office document, you can convert the document to PDF and edit the video properties if needed.
In the Office document, select the position where you want the video to appear.
Do one of the following:
In Office 2003, click the Insert Video button in the PDFMaker toolbar.
In Office 2007, click the Embed Video button in the Acrobat ribbon.
Click the Browse button, and then locate the video you want to include.
Change the video settings as needed:
For video that is not in FLV or SWF format, set a poster image by moving the slider to the desired frame. Then click Set Poster Image From Current Frame.
To determine how the playback controls are displayed, select an option from the Skin menu.
To change the display size of the video, click Resize Video, and then change the width and height. Maintain the aspect ratio for best display.
Click OK to convert the video (if needed), and add it to the document.

In the future you might want to seach Google with the error message; Often shows one interesting results.
Any way hopefully this article will point you in the right direction. It seems removing the Office Acrobat Plugin and then re-installing solved the problem for at least one person. See this thread It it doesn't work specifically with your situation you may want to search the entire results page I got on Google (2 pages) as I don't have time to research them for you and I haven't experienced this specific problem myself.
Cheers.

How do I insert video into my webpage?

I am using Dreamweaver 8. I have taken my camcorder video and uploaded it to youtube and copied the mp4 file to my hard drive.
I have created a page with several videos on the page. I created a screenshot of the video and sized it to the appropriate size. I then created a link to the video mp4 file. However it opens in a separate page.
I want to have the video open on the same page in the same location as the screenshot. Click on the image and it just starts playing.
I notice that I can get it to do this if it is a flash (.flv) file but since all of my videos are mp4 that won't work.
How do I insert video into my webpage? Do I convert the mp4 files to flash? How? What do I do?
Thanks
Matt

The help docs tell you how:
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7c9 fa.html
or:
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7ca da.html
Or other media objects:
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7c9 2a.html

Can't insert videos into iTunes...

hello guyz...
i wanna ask something...
when i bought my iMac, there was already iTunes 6 and i could insert videos into iTunes and sync it into my iPod video...
but now, i've already downloaded iTunes 7.02...
the weird thing is...i can't insert any videos into the library!
i already tried videos with ending .mp4 and .3gp...
but it doesn't appear in the library...
what should i do?
can somebody help me....
plieezz...

This is the menu I'm talking about...

The little grey camera icon ( IMovie) is not working or allowing me to open my photos. I have no problem inserting video. Just won't let me open my photos. Any ideas?

The little grey camera icon ( IMovie) is not working or allowing me to open my photos. I have no problem inserting video. Just won't let me open my photos. Any ideas?

deanfromdouglasville,
It may help to rebuild your iPhoto Library's database, as detailed in the article linked below.
iPhoto 6 and later: Rebuilding the iPhoto library
http://support.apple.com/en-us/HT201769
Regards,
Allen

Problem inserting data into database (increment problem)

I have a servlet page that gets various data from a bean and executes multiple SQL statements to store this data. Beacuase i want to insert data into a number of tables that are related with a one to many relationship I am not using the auto increment function in mySQL. Instead i have created a counter bean that increments each time the servlet is involked. I am using this counter to set the primary key ID in the quesiton table that i insert data into and I am alos inserting it into another table as a foreign key which relates a number or records in the outcomes table to one record in the question table. I am havin a few problems getting it to work.
Firstly the bean counter works but when the tomcat server is shutdown the counter is reset which will cause conflicts in the database no doubt and secondly even though i have not shut my server down i seem to be getting the following error saying there is a duplicate key even though there is no data in the database.
Here is the exception.
javax.servlet.ServletException: Duplicate entry '4' for key 1     org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:825)     org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:758)
org.apache.jsp.authoring.question_005fmanager.process_005fquestion_jsp._jspService(process_005fquestion_jsp.java:469)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
java.sql.SQLException: Duplicate entry '4' for key 1
com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2851)
com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1531)     com.mysql.jdbc.ServerPreparedStatement.serverExecute(ServerPreparedStatement.java:1366)     com.mysql.jdbc.ServerPreparedStatement.executeInternal(ServerPreparedStatement.java:952)     com.mysql.jdbc.PreparedStatement.executeUpdate(PreparedStatement.java:1974)     com.mysql.jdbc.PreparedStatement.executeUpdate(PreparedStatement.java:1897)     com.mysql.jdbc.PreparedStatement.executeUpdate(PreparedStatement.java:1758)     org.apache.jsp.authoring.question_005fmanager.process_005fquestion_jsp._jspService(process_005fquestion_jsp.java:140)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
My code is here
// gets the feedback string parameters
     if(request.getParameterValues("feedbackBox") != null)
               String[] feedbackList = request.getParameterValues("feedbackBox");
               questionData.feedback = feedbackList;
     //gets the session username variable
     String insertQuestion1__username = null;
     if(session.getValue("MM_Username") != null){ insertQuestion1__username = (String)session.getValue("MM_Username");}
     //Creates a new mySQL date
     java.sql.Date currentDate = new java.sql.Date((new java.util.Date()).getTime());
     //goes thorugh each element of the scores array and calculates maxScore
     questionData.maxScore = 0;
     for (int i = 0; i < questionData.scores.length; i++) {
               questionData.maxScore = questionData.maxScore + questionData.scores;
     //increments count;
     synchronized(page) {
appCounter.increaseCount();
     int counter = appCounter.count;
     Driver DriverinsertQuestion = (Driver)Class.forName(MM_connQuestion_DRIVER).newInstance();
     Connection ConninsertQuestion1 = DriverManager.getConnection(MM_connQuestion_STRING,MM_connQuestion_USERNAME,MM_connQuestion_PASSWORD);
     questionData.numOutcomes = questionData.choices.length;
     while (counter != 0)
          int questionID = counter;
          PreparedStatement insertQuestion1 = ConninsertQuestion1.prepareStatement("INSERT INTO Question.question (Question_ID, Topic_ID, Description, Image, Author, Created_Date, Max_Score, Question_Type) VALUES (" + questionID + ", '" + questionData.topicID + "', '" + questionData.questionText + "', '" + questionData.questionImage + "', '" insertQuestion1__username "', '" + currentDate + "', " + questionData.maxScore + ", '" + questionData.questionType + "') ");
          insertQuestion1.executeUpdate();
     Driver DriverinsertQuestion2 = (Driver)Class.forName(MM_connAnswer_DRIVER).newInstance();
     Connection ConninsertQuestion2 = DriverManager.getConnection(MM_connAnswer_STRING,MM_connAnswer_USERNAME,MM_connAnswer_PASSWORD);
     PreparedStatement insertQuestion2 = ConninsertQuestion2.prepareStatement("INSERT INTO Answer.question (Question_ID, Question_Description, Question_Type, Topic, Number_Outcomes, Question_Wording) VALUES ('" counter "', '" questionData.questionLabel "', '" questionData.questionType "', '" questionData.questionType "', '" questionData.topicID "', '" questionData.numOutcomes "', '" questionData.questionText "' ) ");
     insertQuestion2.executeUpdate();
     Driver DriverinsertOutcomes = (Driver)Class.forName(MM_connAnswer_DRIVER).newInstance();
     Connection ConninsertOutcomes = DriverManager.getConnection(MM_connAnswer_STRING,MM_connAnswer_USERNAME,MM_connAnswer_PASSWORD);
     for (int i=0; i < questionData.numOutcomes; i ++)
     PreparedStatement insertOutcomes = ConninsertOutcomes.prepareStatement("INSERT INTO Answer.outcome (Question_ID, Outcome_Number, Outcome_Text, Score, Feedback) VALUES ( '" counter "', '" i "', '" +questionData.choices[i]+ "', '" +questionData.scores[i]+ "', '" +questionData.feedback[i]+ "' ) ");
     insertOutcomes.executeUpdate();
Does anyone know where i am going wrong or how to fix this problem. I would like to know wheter i am doing this the right way. Is thjis the most practical way to use a counter bean or is there a better safer way to do it.
Suggestions would be mcuh appreciated
Thanks

hi Narendran,
    i declared itab as follows
DATA:      tb_final TYPE STANDARD TABLE OF ztable,
                   wa_final TYPE ztable.    "work area
i am populating tb_final as follows:
             wa_final-vkorg = wa_ycostctr_kunwe-vkorg.
              wa_final-vtweg = wa_ycostctr_kunwe-vtweg.
              wa_final-spart = wa_ycostctr_kunwe-spart.
              wa_final-kunwe = wa_ycostctr_kunwe-kunwe.
              wa_final-kondm = wa_ycostctr_kunwe-kondm.
              wa_final-kschl = wa_ycostctr_2-kschl.
              wa_final-hkont = wa_ycostctr_2-saknr.
              wa_final-kostl = wa_ycostctr_kunwe-kostl.
        APPEND wa_final TO tb_final.
              CLEAR wa_final.
here i am not populating Mandt field.
finally in tb_final am not getting the proper data .
kindly help me.
Thanks,
Praveena

Inserting video into templates

I am extremely new to AE. I have CS6 and am trying to learn it on my own... but it's very complicated.
I have a template I am working with that I want to insert video clips into. The template has jpegs that say "insert photo or video here". How do I swap the jpeg with the video clip without losing the keyframes and effects? I'm not well-versed enough to just re-do them all. I am using the templates to learn the program but to also build a few videos for the non-profit I work for.
Another thought I had was if it was possible to copy all the attributes/effects/keyframes from one media piece to another. So if I were to add the video clip to the composition and copy the attributes from the template photo to the video clip I just added and then make the template photo invisible. But I haven't been able to figure that out. :/
Thanks!

Welcome to the world of After Effects! As you've noticed, it can be pretty complicated. I highly recommend that you start here. That is a set of resources specifically curated to help people new to AE get started off on the right foot.
To your question, this page in the AE help has what you need. It says to select the layer you want to replace in the Timeline panel then Alt-drag (Windows) or Option-drag (Mac OS) your new footage item from the Project panel onto the selected layer in the Timeline panel.

Flash beginner... insert SWF into web page and create play button

I am trying to insert and SWF into my webpage. I have 3 problems, 1. I am new to flash and aren't any good at it yet. 2. How do I tell the movie to stop at the end, and insert a "play again" button? 3. What do I need to do to insert that into my webpage.
I realize these aren't yes or no answers, so I even appreciate input on the best way to learn Flash for myself.

2. It can depend, but snce you are probably using the timeline, most likely you just need to put a stop(); command in the last frame to have it stop at the end.
To get it to play again, your button's function code will need to include something like: gotoAndPlay(1);
How the button code gets done depends on which version of Actionscript your file is using.
3. When you publish your swf file, also have Flash publish an html file (you set this up in the Publish Settings). You can then take that html file and copy the embedding code it contains into your web page html file. You may have to include a javascript file as well to make it work, and you can tell that by looking in the head code of the html file Flash created... that head code also needs to go into your web page html file and the javascript file needs to be placed according to how your html code targets it.
You might do best just to get the html page Flash creates working for you first. It might make figuring out how to move it into your web page easier.
My opinion: the best way to learn Flash for yourself is to just dig in and keep at it. You will lose hair and sleep and your mind as you go, but eventually you either get used to that and/or you overcome it.

How do I insert checkboxes into a Pages document?

I have been trying to insert checkboxes into a document I created using Pages version 2.4.2 on my iPad Air. I would like an actual checkbox (not just the image of an empty box) so that a checkmark will appear once it has been selected. I am able to do this with the "Numbers" app, but I cannot copy and paste those check boxes to a Pages document.
I want to use this document as a form I can easily access and print with checkboxes. I have only found a way to insert bullets, but not checkboxes that you can click on with your finger and a check mark appears in the checkbox.
Thank you!

I think you are misunderstanding "Insert text at cursor". The ANNOTATIONS are not text editing tools, rather they are tools for people making comments to "mark up" documents. You use "Insert text at cursor" to tell the document author you want HIM OR HER to insert text at that point; the author reviews all the comments and changes the original.
You need to use one of the OTHER methods mentioned to actually add text. Probably simplest is the typewriter tool, which in Acrobat X is under TOOLS > CONTENT and is called ADD OR EDIT TEXT BOX.

Help with html code - inserting video into Muse

I am seeking help writing the code to insert a video into Muse. I uploaded video into my Business Catalyst hosting. I need it to autoplay, loop and not show any controls or frames.
When I host video on Vimeo or YouTube, I see markings on the video that is why I am trying to just host in the same place that the files are stored for my website. If there is a way to host on youtube with out any markings showing up on the video I would be open to that too.
I don't want to see any play button or time bar.
Thanks in advance!!

Hello,
Just as an FYI - we also have an HTML5 video tool over at MuseThemes.com that achieves this, but works on mobile devices as well. The link above looks like it uses Flash, which isn't common anymore since the release of HTML5 based video.
Simply drag the widget out onto your canvas, and link up your videos / set options like loop, controls visible, etc. It's quite a flexible widget, and there's a complete training video included so you don't get stuck
Check out the widget here
Just wanted to provide another alternative that could be helpful. Cheers!
Steve Harris
MuseThemes.com

Embed video into iweb page

Is there any way to embed video into my iWeb page without making an external HTML file?
Thanks.

QuickTime Media Link format. One of mine as an example:
http://homepage.mac.com/kkirkster/.Public/wwdc_keynote.qtl
They are text based files that download when clicked so there is no need for any addition html code to open a new page.

Inserting Video Into My Training

I have some video that was captured as an AVI file and they
also put it into MPg4 format.
Do I need to convert this into a SWF flash file before I can
insert it into my training program? Do I need outside software to
make this conversion or will "Presenter" do this for me? Is there
somewhere that explains the process for doing this other than the
Adobe Guide for "Presenter". I have not found this very clear.

Presenter has the ability to take, ASF, WMV, MPG, MP4, DV,
DVI, MOV, or 3G videos to FLV.
Use the Insert Video tool in Presenter and see if the MPg4
video will work, or if the team that created the AVI has the
ability to turn it into an FLV, that my be the best option as FLVs
work naively in Presenter.
Jorma@RealEyes

N8: Inserting video into MMS (wrong size is calcul...

Hello,
as far as I know, most providers are supporting a maximum size of 300kb when sending a mms. If i try to insert a video into a new mms, the N8 will record about 1 Minute of video (mms-qualilty), which has a size of about 420kb! That is to big to use it which a mms.
From my old N95 i know a setting, where you could define the 300kb size and the phone only recorded 300kb then in mms-quality. This setting is missing in the new N8 preferences!
Also there is an issue with inserting pictures into mms. Ok, N8 is resizing it, but the old N95 told you when the maximum of 300kb is reached. The N8 don't show any notification at all and the size will grow into the wild.
I'm already using the setting where you should be warned and the picture size is set to small by default! But this changes nothing!
Any thoughts?
Thank you

Hey Helen! I'll do the best I can to provide information in
the order you requested it.
First, yes, that can be done. Just get any one of a variety
of conversion utilities (Google something like "AVI to FLV") to
convert your video to Flash video format.
Second, I do not publish to EXE when I can avoid it, so will
leave it to someone else to tell you whether the FLV can be
accessed within the EXE output. I think not, but like I said, I
don't like the lack of versatility of Captivate's "executable"
output, and avoid using it personally.
Third, inserting a FLV into a Captivate project should not
substantially increase the file size of your EXE (if it can even be
done in an EXE) or your SWF output. Basically the FLV acts as a
"pointer" and is a pretty small file. On the other hand, if you
choose to add your video as a SWF instead of a FLV, you can expect
file-size to increase proportional to the SWF size.
About your "separate note": You can find training at
this Adobe
link to certified training providers
. Use this link to obtain the names and contact information for
the Adobe certfied training providers nearest your geographical
location.
Training companies across the U.S. and around the world offer
instructor-led training by Adobe-certified instructors. You can
register for a "open to the public" class, or you can arrange
on-site training that is specifically geared your needs and/or
wallet.
Best of luck to you!

Problems importing video into Lightroom 5.3

I am using LR 5.3 on a Macbook running Mavericks. Since upgrading from Lightroom 4 I have had trouble importing videos into Lightroom.
The generic video thumbnail appears, but the import hangs and never completes. When cancelling the import the error message is shown "No photos or video were found to import."
After reading on various forums I have tried:
restarting computer (many times)
uninstalling previous version of LR
purging video cache
changing source location
changing destination and/or import type
reinstalling LR5.3
I have also noted that old videos already in the catalogue that played fine in LR4 won't play back in LR5.3. They play fine in Quicktime.
Has anyone else solved this problem?

Hi InVisionMedia
I found a Simular Poste regarding this topic: http://forums.adobe.com/message/5397854
So going over it might enlighting you on the issue. Also i would suggest to start with the Basic Troubleshoot for Playback issues on Lightroom: http://helpx.adobe.com/lightroom/kb/troubleshoot-video-issues-lightroom-4.html
If you have Lightroom 4 still installed, Also make sure that you can still use the footage in the original L4 catalog.
See if the files still work fine in the "old" version.
Hopefully it will help you to fix the issue.

Inserting Video into Powerpoint Slide

I need to place digital video into a powerpoint slide, what would be the quicktime settings, should it be interlaced or progressive?

In addition to those things already suggested I would add the following:
If the presentation is being run from a windows platform (likely if you are preparing for powerpoint), they usually handle mpeg or wmv files better than quicktime.
When making the mpeg or wmv, don't set the resolution or bit rates too high. There are usually fairly high overheads of memory and processor usage in running a video within the presentation and if the resolution or bit rate is too high the system won't keep up. This results in poor quality video, dropped frames etc. For the same reason it is a good idea not to resize the video in the presentation. Audiences usually accept slightly soft or blocky video better than stuttering ones.
Make sure the files are copied to the system's hard drive and not run from a CD. Laptop drives often have trouble keeping up with higher data rates and they are usually set to spin down when not in use for a while.
Test the result on the target system!!! If you can't access the target system find a slow one to test it on unless you know the performance of the one it will be run on.
Our company does live event work as well as post-production and we often see bad results, usually accompanied by comments like "it ran all right at home (on son/daughter's gaming machine), but it isn't working very well on my (5 year old) laptop".
In summing up, I would suggest being conservative rather than trying to impress with dazzling effects and huge high resolution pictures.

Problem inserting video into a page

Similar Messages

Maybe you are looking for