Problem instaling sp3 after rebooting

Hi,
I've decided to install in my macbook pro windows xp sp3 to program with visual studio c++.
What I have done is, first of all, install windows xp sp2 using an original cd, instaling the drivers and boot camp 2.0. After that I install the actualitzation to bootcamp 2.1.
When I complete all these stuff I run the windows update, check if my windows copy is originaly and immidiately it tells to me to install sp3. I install it and when at the end of the instalation it force to me to reboot the system, so I do it. But when the system is loading for the first time after installing sp3 it gets stack in the loading image.
Do you know how can I solve that problem??
Thanks a lot

http://discussions.apple.com/thread.jspa?messageID=7688314&
http://discussions.apple.com/thread.jspa?threadID=1686604&tstart=75
Use the Repair feature in Programs -> Install/Uninstall seems to help some.
I get the sense that reinstalling BC 2.1 after SP3 install is necessary. Or don't install until SP3 (maybe uninstall BC 2.1, then upgrade to XP SP3, then install 2.1 again).

Similar Messages

Installed ok after reboot apach problem

Dear all hello
I have installed 11.5.9 on win2k and it was ok but after reboot when it did not listen on 8000 port so i tried to inspect services and found oracle apacke server vis(instance name) is not started but when i try to start it, it says colud not start as it is some windows internal error.
Any help.
Thanks

hi
this is not the best approach , instead it is advisable to look in event viewer , which gives the best reason for not starting. It also provides the event id and error related info , which can be used to get the answer from microsoft support.
regards
srinivas

Problem installing SP3

Hello!
I'm trying to install SP3 on our Exchange 2010 with SP1. It starts installing, then gets an error at "Hub Transport Role". ExchangeSetup.log says:
[ERROR] The operation couldn't be performed because object 'mail.domain.com' couldn't be found on 'dc1.domain.lan'
- mail.domain.com is the external hostname of the Exchange server
- dc1.domain.lan is the internal hostname of the domain controller
The powershell command run by setup is:
upgrade-ExchangeServer -Identity:'mail.domain.com' -DomainController:'dc1.domain.lan'
Why does it use the external hostname? And how can I correct it? And the last question: how do I restart the setup after I've corrected the problem? If I just start it again, it want's to install all again...
Thank you very much for your help!

Hi,
Thanks for your sharing.
It's great to hear the good news.
Best regards,
Amy
Amy Wang
TechNet Community Support

Bought snow leopard 10.6.3.( mac intel i3) having problems installing product. after 15mins computer freezes any ideas?, bought snow leopard 10.6.3.( mac intel i3) having problems installing product. after 15mins computer freezes any ideas?

Hi recently bought snow leopard 10.6.3. Having problems installing. My i Mac has intel i3 and system 10.6.8 . After about 15mins the computer restarts but freezes with apple logo. Any ideas? thanks alan

Yes, 10.6.8 update was specifically to ease the Lion installation (apart from some security updates).
Juat log onto the App Store (Icon would be in the Dock by default) and find the download. If you're not already registered with App Store, you'll need credit card info to hand, and your Apple ID (the one you use to log in here or the iTunes Store if you use it).
You would only need the retail SL disc if you were running 10.5.8 (Leopard) or earlier.

Problems installing CS2 after uninstall

I am having a problem with CS2 after an uninstall. I recently got an error working with In-Design and it had me fix the problem of course I had to do a full uninstall and reinstall.
When I get to the auto install problem it will open than immediately close doing nothing. I have even tried to make a copy of the disc to the hard drive and install that way and it will get to the password part than stop to work.
I have also followed the manual removal instructions to remove all adobe programs.
Also tried the moving disc 1 and 2 to the hard drive mount them and run the install.
Nothing I have read so far works. Help please!
Some system stuff
Mac OS X
Version; 10.4.11
Processor: Dual 2.7 GHz PowerPC G5
Memory: 2.5 GB DDR SDRAM
Hard drive format: Mac OS Extended (Journaled)
Also running down to the installer I get this
Last login: Wed Dec 10 14:58:07 on console
Welcome to Darwin!
/Volumes/Adobe\ Creative\ Suite\ Disk\ 1/Adobe\ Installer.app/Contents/MacOS/Adobe\ Installer; exit
Samis-Power-Mac-G5:~ sami$ /Volumes/Adobe\ Creative\ Suite\ Disk\ 1/Adobe\ Installer.app/Contents/MacOS/Adobe\ Installer; exit
2008-12-10 15:07:00.277 Adobe Installer[845]: DebugAssert: AdobeInstaller: removedLockFile == YES [:0]
2008-12-10 15:07:00.278 Adobe Installer[845] bootstrap
mkdir: /tmp/845: Permission denied
2008-12-10 15:07:00.288 Adobe Installer[845] error 1, "/bin/mkdir -p /tmp/845"
2008-12-10 15:07:00.288 Adobe Installer[845] copyApp status 1
2008-12-10 15:07:00.289 Adobe Installer[845]: DebugAssert: AMIFramework: destinationAppExecutable cantConstructExecutablePath_FatalError [:0]
2008-12-10 15:07:00.292 Adobe Installer[845] launchApp:WithPrivileges: status 6
logout
[Process completed]

No to both I'm afraid. CS2 can't be used on a Mac running Yosemite. The only version of the Creative Suite that qualifies for an upgrade is CS5. Your options are to buy CS6 or subscribe to the Creative Cloud.

Ios 7.0.3 was updated and installed but after reboot it was still in 7.0.2

i'm unable to update from ios 7.0.2 to ios 7.0.3 which is the latest version for my iphone 4 but it isn't updating from 7.0.2 to 7.0.3 after rebooting
please help me what might be the problem

I believe in the initial iOS 7.0.0 release, the "Reduce Motion" only affected the Parallax effect. iOS 7.0.3 now affects both the Parallax effect as well as zoom effect. Disabling motion now changes the zoom effect to a fade effect while the Parallax feature remains the same.

Screen backlight off during 10.5 install and after reboot?

Hi there,
I'm having an interesting issue with my MBP after Leopard installation. Interestingly, it started with the actual installation itself -- when I rebooted into the install process, the backlight on the display was off and I couldn't turn it on/make it brighter with the keyboard commands. I went ahead with the install, and the same problem now happens when I reboot the machine -- the backlight is off until the OS boots fully and I'm logged into my account, and then the keyboard works to brighten the screen.
Any ideas? I've searched the forums and haven't found anything helpful...
Thanks!

Hi there,
I'm having an interesting issue with my MBP after Leopard installation. Interestingly, it started with the actual installation itself -- when I rebooted into the install process, the backlight on the display was off and I couldn't turn it on/make it brighter with the keyboard commands. I went ahead with the install, and the same problem now happens when I reboot the machine -- the backlight is off until the OS boots fully and I'm logged into my account, and then the keyboard works to brighten the screen.
Any ideas? I've searched the forums and haven't found anything helpful...
Thanks!

Problem Installing Adobe After Effects

I've heard about the Adobe After Effects CS6. And I installed the Adobe Download Assistant. But every time I clicked on the button "download" button, an Error thing came up. I also tried to download the other software and they were just fine. Only the After Effects CS6 has a problem. The Error thing I received is the " Error communicating with Adobe.com (Error 107), it asked me to restart the Download Assistant and I restarted it a lot of times... But I still just can't install it. Hope someone could help me.

Which Internet service provider are you using? Many users have posted about this but I have never been able to duplicate the behavior. No one ever seems to respond back though with their ISP information.
Beyond that you can follow the steps listed at http://forums.adobe.com/thread/981369 to initiate a direct download.

Problem installing OS9 after OSX bugger up

Hey folks.
Ive got a G4 Tower that my brother got from his work. He wanted me to stick OSX on it which i did not realising you need to install the firmware update first. So ive tried to go reinstall OS9 on the drive in order to do this...herein lies the problem:
I havent seen my genuine OS9 discs for yonks, i have no idea where they are (plus they are the discs that came with my 400MHz iMac so they might not work anyhoo) so i opted for getting a copy through...questionable means. It all works fine, ive burnt the contents to a disc and can run the installer with no problems.
I connected the tower to my iBook using target mode and wiped the hard drive remotely using Disk Utility. There was no way i could use the drive otherwise, it just came up with the OSX boot screen then eventually the no entry sign. After wiping and reformatting the drive it comes up fine in target mode. I run the installer and it puts OS9 on the target disk with no problems, the installer finishes and everything. I went back into the the installer straight afterwards to confirm it worked and it said the version i had intalled was Z2-9.0.4 or something to that effect. When i restart the tower it comes up with the flashing folder that normally comes up when there is a system folder problem. I can access all the files on the drive when in target mode, but i cant boot up from the drive even though the OS installed with no problems.
Can anyone help with this problem, i know it was unethical to use a pirated copy but where else am i going to get a copy of OS9 these days?!

right update time:
i downloaded both of those updates (9.1/9.2.1) Went through the whole installation prcoess again starting with 9.0.4. That installed ok, straight afterwards i installed the 9.1 update. That had a small complaint about not being able to access a 'About Apple Script' file. It seemed like a non-core file so i just told it to carry on, which it did and it said the installer finished properly with no problems, and after checking in the installer app it said it had Z2-9.1 installed. Then i did the 9.2 update. Again it went smoothly, it had one hicup where it said something about a drive file not being right '-- Mac Help Guide.img' or something along those lines, again it seems like an unimportant file so i tell it to carry on. It comes up with a box saying something cannot be installed, i tell it to skip and it carries on. Eventually it finishes the installation, saying some software has not been installed, but it finishes none the less. Afterwards i go back into the installer and check to make sure it has worked and it says it has Z1-9.2.1 installed and when i went to install it again to make sure it asks if i want to remove/overwrite it or add more to it.
From this surely one would assertain that 9.2.1 has been installed on the machine. I went into the machine's system folder afterwards, looked up all the important files such as System, and it says that it is version Z1-9.2.1. HOWEVER when i go to restart the machine it comes up with the flashing question mark again. I dont get it! From accessing the machine through TD mode it says that it has 9.2.1 installed, if thats the case why isnt it loading the system folder properly?!

Simple two node Cluster Install - Hung after reboot of first node

Hello,
Over the past couple of days I have tried to install a simple two node cluster using two identical SunFire X4200s, firstly following the recipe in: http://www.sun.com/software/solaris/howtoguides/twonodecluster.jsp
and when that failed referring to http://docs.sun.com/app/docs/doc/819-0912 and http://docs.sun.com/app/docs/doc/819-2970.
I am trying to keep the install process as simple as possible, no switch, just back to back connections for the internal networking (node1 e1000g0 <--> node2 e1000g0, node1 e1000g1 <--> node2 e1000g1)
I ran the installer on both X4200s with default answers. This went through smoothly without problems.
I ran scinstall on node1, first time through, choosing "typical" as suggested in the how to guide. Everything goes OK (no errors) node2 reboots, but node1 just sits there waiting for node2, no errors, nothing....
I also tried rerunning scinstall choosing "Custom", and then selecting the no switch option. Same thing happened.
I must be doing something stupid, it's such a simple setup! Any ideas??
Here's the final screen from node1 (dcmds0) in both cases:
Cluster Creation
Log file - /var/cluster/logs/install/scinstall.log.940
Checking installation status ... done
The Sun Cluster software is installed on "dcmds0".
The Sun Cluster software is installed on "dcmds1".
Started sccheck on "dcmds0".
Started sccheck on "dcmds1".
sccheck completed with no errors or warnings for "dcmds0".
sccheck completed with no errors or warnings for "dcmds1".
Configuring "dcmds1" ... done
Rebooting "dcmds1" ...
Output from scconf on node2 (dcmds1):
bash-3.00# scconf -p
Cluster name: dcmdscluster
Cluster ID: 0x47538959
Cluster install mode: enabled
Cluster private net: 172.16.0.0
Cluster private netmask: 255.255.248.0
Cluster maximum nodes: 64
Cluster maximum private networks: 10
Cluster new node authentication: unix
Cluster authorized-node list: dcmds0 dcmds1
Cluster transport heart beat timeout: 10000
Cluster transport heart beat quantum: 1000
Round Robin Load Balancing UDP session timeout: 480
Cluster nodes: dcmds1
Cluster node name: dcmds1
Node ID: 1
Node enabled: yes
Node private hostname: clusternode1-priv
Node quorum vote count: 1
Node reservation key: 0x4753895900000001
Node zones: <NULL>
CPU shares for global zone: 1
Minimum CPU requested for global zone: 1
Node transport adapters: e1000g0 e1000g1
Node transport adapter: e1000g0
Adapter enabled: no
Adapter transport type: dlpi
Adapter property: device_name=e1000g
Adapter property: device_instance=0
Adapter property: lazy_free=1
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=70
Adapter port names: <NULL>
Node transport adapter: e1000g1
Adapter enabled: no
Adapter transport type: dlpi
Adapter property: device_name=e1000g
Adapter property: device_instance=1
Adapter property: lazy_free=1
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=70
Adapter port names: <NULL>
Cluster transport switches: <NULL>
Cluster transport cables
Endpoint Endpoint State
Quorum devices: <NULL>
Rob.

I have found out why the install hung - this needs to be added into the install guide(s) at once!! - It's VERY frustrating when an install guide is incomplete!
The solution is posted in the HA-Cluster OpenSolaris forums at:
http://opensolaris.org/os/community/ha-clusters/ohac/Documentation/SCXdocs/relnotes/#bugs
In particular, my problem was that I selected to make my Solaris install secure (A good idea, I thought!). Unfortunately, this stops Sun Cluster from working. To fix the problem you need to perform the following steps on each secured node:
Problem Summary: During Solaris installation, the setting of a restricted network profile disables external access to network services that Sun Cluster functionality uses, ie: The RPC communication service, which is required for cluster communication
Workaround: Restore external access to RPC communication.
Perform the following commands to restore external access to RPC communication.
# svccfg
svc:> select network/rpc/bind
svc:/network/rpc/bind> setprop config/local_only=false
svc:/network/rpc/bind> quit
# svcadm refresh network/rpc/bind:default
# svcprop network/rpc/bind:default | grep local_only
Once I applied these commands, the install process continued ... AT LAST!!!
Rob.

Problem installing itunes after computer reformat

I resently reformatted my computer, and during this my brother transferred some programs from his computer to mine, one of these being itunes. The problem is, he has windows 7 and i have vista, so now itunes isnt installing properly. i have followed all the trouble shooting options in the guide, but still says it cant install it. I have heard it may be a problem with itunes on my registery, is there a way i can safely remove it from there so i can reinstall it?

FIXED!!! here is what i did: Downloaded and saved itunes, dled WinRAR. right clicked the itunes.exe icon and opened with winrar, double clicked all the icons in the winrar page for itunes, some didnt work, but the ones that did i clicked repair. Then i deleted the itunes.exe file and redownloaded itunes and it worked!! Not sure how doing what i did solved it, but it did so i is a happy sausage.

Problems installing code after flash upgrade

I just upgraded a 2600 router from 8 MB flash to 16 MB flash (that came from a working 3600). I know for a fact that the firmware for the router with the upgrade is good - I was able to upgrade a different router with no problem. However, with the new flash, the transfer of the code errors out with
File reception completed.
TFTP copy: operation terminated due to bad checksum comparison.
As best as I can tell, the flash is the same between the 2600 and 3600. Please let me know if anyone was able to successfuly do this. Thank you.

I tftp'd the image for the 2600 into the flash when it was installed in the 3600, stuck the flash into the 2600, and it boots.

Problems Installing CS3 after CS4 install.

About 3 weeks ago or so i downloaded the beta for Dreamweaver CS4. And just a couple of days ago i tried to reinstall Flash CS3 from my CS3 Master Suite and i got this message.
Component install failed. The original installation media has been moved or deleted. Please replace the media at its original location: C:\Documents and Settings\Lucas\Desktop\AdobeCS4\Dreamweaver CS4 Beta\payloads\AdobeALMAnchorService2-mul\AdobeALMAnchorServices2-mul.msi
Right now i am trying to uninstall the DW CS4 but has anyone ran into a problem like this or have any advise on how i can fix this?

>SURELY that is implied?
Absolutely not! My guess is that the average user knows what "beta" means and the implication not to use it for real work, just in case. If they can take the time to warn you about that then they could at least let us know of potential problems in simply removing the damn thing. In fact, not so much removing it, I can live with it on my machine, it's the realization that it can seriously interfere with further installations - of their own software! If I remember correctly the beta release was displayed prominently on the Adobe homepage - "BE THE FIRST TO TRY IT!" or something similar, the implication, to my mind, is that it's safe to download.
With my fingers crossed, I hope that my upgrade to CS4 will be trouble free so it may not be a problem, but it obviously is to Lucas at the moment. I've downloaded numerous betas and removed them without any problem and assumed Dreamweaver CS4 would be the same. As I said, the average user thinks of the bugs being in the operation of the program. I now know that there's much more risk involved (with Adobe at least) and I'll be more cautious in the future.

[ACS]Problem web interface after reboot

Hello,
After power outage, when my ACS reboots the web interface doesn't start.
When I connect to CLI with SSH, I enter the command :
sh acs-config-web-interface
This is the result :
ACS management must be running
Please issue 'acs start' CLI if stopped,
or wait for the ACS processes to come up
So I enter the command :
acs start
And it's OK.
What is the reason why the ACS doesn't start properly?
Thank you in advance for your response.
Regards.
Thomas.

Hi Thomas,
Which version of ACS you are running?
Regards
Najaf

Problems with Lion after reboot

My configuration:
MacPro 2009, 30" Cinema Display, keybord connected to display, mouse in left USB-Port odf the keyboard.
The system starts up normal to the login-screen. Mousepointer moves, but the login-screen is "dead" for 8 minutes. After that all works fine.
All works fine when I connect the mouse to the right USB port. Very strange - Can anybody explain what is wrong?
All works fine with Snow Leopard.

Try resetting the SMC and the PRAM.
1. SMC
Read this and follow the instructions for your kind of mac:
http://support.apple.com/kb/HT3964
2. PRAM
Follow the procedure below:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
command–option–P–R
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as it should normally.

Problem instaling sp3 after rebooting

Similar Messages

Maybe you are looking for