Problem install driver sound blaster Omni surround 5.1

Hi, I have just bought this sound card. My computer is using win 7. But when I insert CD and install driver. Then I can't install it and the message below is showed:
"Setup is unable to detect a supported product on your system"
Please help me resolve it .
Thank you so much

Maybe you are connecting your Omni Surround 5.1 to a USB hub. How about trying to connect the device to another empty USB port?
Maybe you can try to disable your on board sound card in the bios to see if it works.

Similar Messages

Sound blaster omni surround 5.1 problem with mp3 player line in

For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg

Originally Posted by xnathanmeyerx
For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg
Hey xnathanmeyerx,
Please select Line-In of Sound Blaster Omni Surround 5.1 as the default Input for the Mac computer. It can be configured at Sound under the Mac System Preferences. I hope this helps.
All the Best!!
Yours sincerely,
JL

Sound Blaster OMNI Surround 5.1 - input issue

Hi there all,
Purchased one of the above units today after sales person confirmed I could input three channels. I have three radios and wanted to take there mono output and put 2 into 1 for Line-In (Stereo) and 1 into Mic-in (Mono).
Have tried everything and can't have both Mic-In and Line-In active at the same time in Win7, reviewing manual and sales images its show you can attached to line-in and to Mic-in but does not say anywhere you can only use one at a time.
Can someone please confirm if its possible to use both Line-in and Mic-in at the same time or not.
Many thanks
Dave

Originally Posted by xnathanmeyerx
For some reason, in the sound blaster omni surround 5.1 mac software, the line in volume is stuck on mute. I cannot select it, which does not allow me to move the volume up or down. How do I fix this?Screen Shot 2014-10-17 at 8.07.00 AM.jpg
Hey xnathanmeyerx,
Please select Line-In of Sound Blaster Omni Surround 5.1 as the default Input for the Mac computer. It can be configured at Sound under the Mac System Preferences. I hope this helps.
All the Best!!
Yours sincerely,
JL

Sound Blaster omni 5.1 doesn't work with Yosemite 10.10.1

Hi all! My SoundBlaster omni 5.1 doesn't work with Yosemite 10.10.1 (installed driver for Yosemite 10.10). Equipment in system is displayed properly, like "Sound Blaster Omni Surround 5.1". And SB is set as active. Volume controller is active (system shows volume adjustment). But there is no sound on output (either) and mic doesn't catch the signal.With MS Windows 8.1 it works good. Therefore I suppose problem not in hardwear, most likely in drivers.Does anybody have the same problem?

Hi Andrew,
The latest drivers release on 4 Nov, 2014 can be found here.
Please download/install it and let me know if you still have the same problem.
Cheers,
Colin-CL

Problem: Sound Blaster Arena Surround USB Gaming Headset

Hello
I have one of these Sound Blaster Arena Surround USB Gaming Headset, which are 7..
I have Windows 7 as OS on my computer and it gives me a few problems.
W7 recognises the headset as a "Stereo" headset. The headset has a Sound Card of it's own and uses the drivers that come with the Installation CD for Surround settings that are mad in Audio Control Panel or Creative Entertainment Console.
This is a problem.
For example. Playing Call of Duty 5: World at War.
The audio settings on this game, always (and is unchangeable) goes after the default Audio Device. And then it recognises my Headset. And puts in STEREO config. Since it was W7 recognises, and I cant change that on the game and neither on the Audio Settings on the computer. Which make the subwoffer and Surround effects useless which is a hard bummer, since it's such an awesome headset and is totally awesome when i play Battlefield: Bad Company 2.
I really want to know how I can fix this! Please help me. Any settings or special config in the cfg files you can do on Call of Duty 5 or and settings or stuff I can do to change so W7 recognises my headset with the 7.!

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

No left audio. No serial. Sound Blaster Arena Surround usb Gaming Headset.

I have a Sound Blaster Arena Surround usb Gaming Headset and the left speaker no longer works.
I have tried the headset on multiple computers ranging from xp to vista to 7. some have different versions of the driver. On all the left audio is silent.
I would like to redeem my warranty because I bought the product on 08/04/10
But I no longer have the box or booklet that came with it and therefore can’t get the serial number for the device.
Is there anything you guys can do to help me?
The closest article I could find to this problem was here http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-problem/m-p/558966#M2001. So it appears I must wait for an admin to help.

Thanks!
Very handy info.
I went to http://rma.creativelabs.com/OnlineRMA/EnterProduct and that section required I have a legit serial number.
Thanks!

How does one enable Stereo Mix on the Sound Blaster Arena Surround USB Gaming Headset

I'm usually streaming games and I picked up this headset to replace my old gear.
I've noticed in 32-bit XP Pro I do not have the option to enable stereo mix which was how i was able to stream game audio and commentary on.
Does a work around exist to enable stereo mix or to otherwise transmit audio from both the input and playback sources?
BTW I've also posted this on the Livestream forums to see if I can get a bite.

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

Sound Blaster Arena Surround USB Gaming Headset broken

6Sound Blaster Arena Surround USB Gaming Headset broken?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#t384326">Original post on tom's hardware[/url]
Hello,?
My cat jumped off my?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#">computer[/url]?desk while I was wearing my?[url="http://www.tomshardware.com/forum/5789-6-sound-blaster-arena-surround-gaming-headset-broken#">headphones[/url]. The result was the wires separating from the USB end. They are quite distinguishable and not impossible to solder. However knowing which wire corresponds to which solder point is beyond me. I contacted Creative. They will not help me. If anyone has a Sound Blaster Arena Surround USB Gaming Headset and would be willing to open up the plastic housing on the USB end to tell me what goes where I would greatly appreciate it. Also the plastic housing will go back together. If any additional info is necessary, please inquire.
[img"]http://img76.imageshack.us/img76/3769/arenaheadsetwiringdiagr.png" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img685.imageshack.us/img685/876/p000896y.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img846.imageshack.us/img846/869/p000899.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27 [img"]http://img860.imageshack.us/img860/4259/p000898.jpg" alt="Image Hosted by ImageShack.us">
By [url="http://profile.imageshack.us/user/pruwdent" target="_new">pruwdent[/url] at 20-05-27

[url="http://forums.creative.com/t5/Headphones-Headsets/Sound-Blaster-Arena-Surround-USB-Gaming-Headset-broken/td-p/576577">moved to headphone & headset section[/url]

Sound Blaster XFI Surround - Need a mixer like Creative Surround Mixer

Hi I have the SB XFI Surround card which connects through USB, I had an Audigy which had a great piece of software called Creative Surround Mixer, through which I could easily adjust the sound levels of each speaker by dragging a point on the display and thus mark my location in relation to the speakers. This was really great and I need that software or something similar for my XFI, is there anything with the same functionality? I tried downloading and installing the Creative Surround Mixer but apparently it doesnt work with the XFI. Thanks

Originally Posted by tillt
Thanks for confirming, omik.ron.
Meanwhile, I am working around that issue by plugging the Omni Surround into another machine (running 10.9) and using AirPlay display mirroring from my 10.10 machine towards the 10.9 machine. That way I still have full control over the sound output from the Yosemite machine. That isn't ideal but works good enough until they release an update.
Same issue here. Would be nice to have a working driver on OSX 10.10 !

Audio and video skip after installing USB Sound Blaster Audigy 2

Hi community,?Since installing my USB Sound Blaster Audigy 2 NX, audio and video skip when being played with either windows media player, winamp, iTunes, neroshow, winDVD 7, creatives own media players etc. in fact anything I can try, won't work. Games are fine, in fact the sound is brilliant. I'd be really grateful for any feedback on this, not being able to listen to music is driving me crazy. Thanks.

Hello thebro90,I had the same problem.After tryed everything, uninstall, reinstall audio drivers, etc, I finally manage to solved it by updating the CPU drivers... I have a AMD Atlhon X2 4800+Never had the problem again.Best regards.
S?rgio

Sound blaster Upmixed surround sound Vs Home Theatre syste

Is there anyone has used Sound Blaster (any kind) to Upmix the stereo sound to surround (5.,6. or 7.) by hooking up to the home theatre system? Please help tell me the surround sound of which one (by using Sound Blaster upmixing or Home theatre system's) is better?

leminhyen wrote:
Is there anyone has used Sound Blaster (any kind) to Upmix the stereo sound to surround (5.,6. or 7.) by hooking up to the home theatre system? Please help tell me the surround sound of which one (by using Sound Blaster upmixing or Home theatre system's) is better?
Not quite sure what your asking but here goes anyway, 7. is obviously the better due to having 7speakers and a sub which equals more channels, more speakers, greter effects.
If you have a creative home theatre that is 7. such as 'Creative GigaWorks S750' and your sound card doesnt support 7. then the theatre system does allow you to upmix 5. or 6. to 7., but this is not as good as having true 7. because for example if you watch a movie that has 7. surround sound support the sound will only be played in 5. or 6. but the theatre system will upmix it to play on all 7 speakers, to explain in more detail if the film you are watching is trying to play sound on just the middle speakers if the sound card only supports 5. then the sound will get sent to the rear speakers insted and the theater system will upmix it and send it to the middle speakers as well, which would reduce what ever sound effects it is that the movie is trying to put across. So for the best performance and entertainment value a 7. theatre system with 7. capable sound card is the best option.
Hope this helps
Michael

I need drive sound blaster model ct4780

' i need dri've sound blaster (li've) model ct4780
[url="http://vozforums.com/archi've/index.php/t-43367.html" rel="nofollow">Li've ch?p EMU0K-[/url]
please help me.
thanks you
im vietnam so i can't type english good

+ That card is also known as the SB Li've Value and the drivers can be found here,
http://support.creative.com/Products/ProductDetails.aspx?catID=&subCatID=206&prodID=485 6&prodName=Sound%20Blaster%20Li've!%20Value&subCatName=Li've!&CatName=Sound+Blaster

Computer will not boot when I install my Sound Blaster Live Ca

My computer wiil not boot when I put my sound blaster li've card in. Any body have any ideas that I could try?
Thanks
tbaker

Turn off your pc, remove the jumper near the battary for 5 seconds, then put the jumper back.
If it works go to BIOS and switch off (disable) Audio on Board or Sound on Board , (if you have it), then start your pc. Should work !!!
I hope it helps!!!

Sound Blaster Omni 5.1 Surround randomly loses audio in or out.

When I'm playing games or voice chatting in skype - sometimes sound just go off or mic stops working. And I see that in Windows Playback devices sound bar is green as if sound is there, but nothing heard on headphones.
I re-plug usb cable and it works again. What could be the problem?

Hi Andrew,
The latest drivers release on 4 Nov, 2014 can be found here.
Please download/install it and let me know if you still have the same problem.
Cheers,
Colin-CL

Installation Problem with my Sound Blaster Audigy Li

I own a Win XP 64 bit Edition and want to install my soundcard.
But there is no driver for my Soundblaster.
Please help, the Model Number is SB000.
Cause i installed linux next to windows i saw, that it is identified as an SB Li've! 5. so i downloaded that 64 bit driver.
The Installer runs throw the process, but there does not appear any WHQL message or anything.
After reboot there is still no SB installed.
Please help me.Message Edited by Good_Will_Hear on 07-27-2006 2:7 PM

Got one right >here, but it's a Beta driver. Meaning, it may or may not work, and it's unsupported. Your sound card is a Li've! 5., which wasn't really designed for x64.
Good luck!
DaleMessage Edited by Dale-CL on 07-27-2006 02:4 PM

Problem install driver sound blaster Omni surround 5.1

Similar Messages

Maybe you are looking for