Problem install EHP2 NW (DB2) "update database registry"
Hi, I have problem install EHP2 NW Solaris and db2. in the phase "update database registry".
the log is:
Unable to access application /db2/db2epd/sqllib/adm/db2set. No such file or directory
Failed action: with parameters
Error number 0 error type SPECIFIC_CODE
S.O:
In the directory /db2/db2epd
server: ls
db2_software
only found this file. not such file sqllib.
what happend??
help please.
Hi,
What is your Operating system ?
Please make sure that file system should not be created with cio option but with rw option.
Thanks
Sunny
Similar Messages
-
Problem install EHP2 NW Java (DB2)
HI, i have problem install Portal EHP2. The Operation System is: Solaris and Database: DB2.
In the server there is a previous installation (BW / DB2)
The error show message:
Phase installation: "update database registry"
log sapinst.log
Unable to access application /db2/db2epd/sqllib/adm/db2set. No such file or directory
Failed action: with parameters
Error number 0 error type SPECIFIC_CODE
In the Operation System:
Directory:
/db2/db2epd
In this directory not found file sqllib. Only found db2_sotware.Hello
Please familiarize yourself with the forum [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]. Please do not cross post the same topic on several different forums.
Please close this thread.
Regards
XI/PI Moderator -
ERP EHP4 Installation Problem in Update Database registry Phase.
Hi,
We are installing ERP 6.0 EHP4 Ready SR1 on AIX6.1 (6100-03-01-0921) and DB2 v9.1.0.7.
During installation in phase Update Database Registry, we are getting below error:
SQL1042C An unexpected system error occurred
If any body has faced this error earlier, then please suggest.
Thanks
SunnyHi,
Please find below the latest entries in db2diag.log:
2009-12-14-20.15.17.555605-330 I25354A304 LEVEL: Event
PID : 630830 TID : 1 PROC : db2stop2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:260
DATA #1 : String, 43 bytes
System controller termination is completed.
2009-12-14-20.15.17.555785-330 I25659A383 LEVEL: Event
PID : 630830 TID : 1 PROC : db2stop2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:270
DATA #1 : String, 26 bytes
Active EDUs to be waited :
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCF70 : 0000 0001 ....
2009-12-14-20.15.17.565945-330 I26043A381 LEVEL: Event
PID : 630830 TID : 1 PROC : db2stop2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:280
DATA #1 : String, 24 bytes
There is no active EDUs.
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCF70 : 0000 0000 ....
2009-12-14-20.15.17.830570-330 E26425A301 LEVEL: Event
PID : 630830 TID : 1 PROC : db2stop2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:911
MESSAGE : ADM7514W Database manager has stopped.
STOP : DB2 DBM
2009-12-14-20.15.24.936396-330 I26727A1630 LEVEL: Event
PID : 545014 TID : 1 PROC : db2start
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleStartStopSingleNode, probe:1130
DATA #1 : String, 31 bytes
/db2/db2ged/sqllib/adm/db2star2
DATA #2 : Hexdump, 256 bytes
0x0FFFFFFFFFFF9C20 : 2F64 6232 2F64 6232 6765 642F 7371 6C6C /db2/db2ged/sqll
0x0FFFFFFFFFFF9C30 : 6962 2F61 646D 2F64 6232 7374 6172 3200 ib/adm/db2star2.
0x0FFFFFFFFFFF9C40 : 4E4F 4D53 4700 0000 0000 0000 0000 0000 NOMSG...........
0x0FFFFFFFFFFF9C50 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9C60 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9C70 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9C80 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9C90 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CA0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CB0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CC0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CD0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CE0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CF0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9D00 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9D10 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
2009-12-14-20.15.25.077684-330 E28358A856 LEVEL: Warning
PID : 602312 TID : 1 PROC : db2star2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, license manager, sqllcRequestAccess, probe:1
MESSAGE : ADM12007E There are "89" day(s) left in the evaluation period for
the product "DB2 Enterprise Server Edition". For evaluation license
terms and conditions, refer to the IBM License Acceptance and License
Information document located in the license directory in the
installation path of this product. If you have licensed this product,
ensure the license key is properly registered. You can register the
license via the License Center or db2licm command line utility. The
license file can be obtained from your licensed product CD.
2009-12-14-20.15.25.174108-330 E29215A384 LEVEL: Warning
PID : 667782 TID : 1 PROC : db2wdog 0
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, routine_infrastructure, sqlerInitFmpTable, probe:30
DATA #1 : String, 16 bytes
agentCachingFmp:
DATA #2 : String, 3 bytes
OFF
DATA #3 : String, 5 bytes
Flag:
DATA #4 : Boolean, 1 bytes
false
2009-12-14-20.15.26.288917-330 E29600A1208 LEVEL: Event
PID : 602312 TID : 1 PROC : db2star2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
MESSAGE : ADM7513W Database manager has started.
START : DB2 DBM
DATA #1 : Build Level, 152 bytes
Instance "db2ged" uses "64" bits and DB2 code release "SQL09017"
with level identifier "02080107".
Informational tokens are "DB2 v9.1.0.7", "s090308", "U823509", Fix Pack "7".
DATA #2 : System Info, 224 bytes
System: AIX gpldeve1 1 6 00C1EF854C00
CPU: total:8 online:4 Threading degree per core:2
Physical Memory(MB): total:14336 free:10662
Virtual Memory(MB): total:35328 free:31640
Swap Memory(MB): total:20992 free:20978
Kernel Params: msgMaxMessageSize:4194304 msgMaxQueueSize:4194304
shmMax:68719476736 shmMin:1 shmIDs:131072
shmSegments:68719476736 semIDs:131072 semNumPerID:65535
semOps:1024 semMaxVal:32767 semAdjustOnExit:16384
Cur data size (bytes) = 0x7FFFFFFFFFFFFFFF
Cur stack size (bytes) = 0x7FFFFFFFFFFFFFFF
Cur core size (bytes) = 0x0000000077359400
nofiles (descriptors) = 0x7FFFFFFFFFFFFFFF
2009-12-14-20.18.03.426764-330 E30809A597 LEVEL: Warning (OS)
PID : 544840 TID : 1 PROC : db2set
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloqcurdir, probe:100
MESSAGE : ZRC=0x840F0001=-2079391743=SQLO_ACCD "Access Denied"
DIA8701C Access denied for resource "", operating system return code
was "".
CALLED : OS, -, unspecified_system_function
OSERR : EACCES (13) "Permission denied"
DATA #1 : File name, 0 bytes
Object not dumped: Address: 0x0FFFFFFFFFFFE688 Size: 0 Reason: Zero-length data
2009-12-14-20.18.03.429260-330 I31407A290 LEVEL: Event
PID : 544840 TID : 1 PROC : db2set
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, oper system services, db2set_main, probe:40
CHANGE : CFG DB2SET: DB2_WORKLOAD: From: "SAP" To: "SAP"
Thanks
Sunny -
Anyone else having a problem installing the 13.1 update to Elements 13. I keep getting the Error Code:U44M1I210
I don't know what to tell you. I get the same crap. I have been into computers for about 25 years now and it really ticks me off that after all these years these companys can not put out something that works. It seems like they put it out then expect the buyer to fix there screw ups. Why should we have to do there jobs and have to pay for it too?
-
Problem installing Mac OS X Update 10.7.4
I have tried several times to install the Mac OSX Update Version 10.7.4.
Each time the comptuer will not restart and I have to use the Time Machine backup (prior to the update download) to fix it. Does anyone have any idea what the problem could be?Hello:
A question.....how long did you wait for the computer to restart?
In any event, I think I would download the update again and then apply it.
Barry -
Problem installing service pack 3 update
I have windows XP up and running on a seperate drive in my Mac Pro. I am now trying to update Windows by installing service pack 3 update via the Windows Update option in the control panel.
I get an error everytime saying there is not enough disk space. My hard drive have 109GB of free space so I don't know what the problem is.
Any ideas?jperkinski:
Here is a solution for you that should work:
Boot into Windows XP and get to the desktop.
Click on the START Button
Click on RUN
Type Regedit in the windows and click on OK
*Navigate to*
HKEYLOCALMACHINE\Software\Microsoft\Windows\CurrentVersion\Setup
HKEYLOCALMACHINE
\Software
\Microsoft
\Windows
\CurrentVersion
\Setup
In the right pane, Right-click and select New - String value
Name it as “BootDir” and set its value to “C:\”
Try installing SP3 now and it should work.
Axel F. -
Problem installing 7.6.1 update
I am receiving an error message near the end of the install of this update the says itunes.msi path cannot be located. I have downloaded many updates previously without this problem. I did notice recently that my desktop shortcut to ITunes no longer worked and I had to create a new one.
I cannot locate any ITunes.msi file on my computer. Any thoughts or solutions?
ThanksI also receive an error near the end of the installation. It is not specified however what has gone wrong. It suggests me to just download the new version and then install manually, but I don't find the option to just download ANYWHERE. Each time there is a new version lately I run in to some kind of problem. Worst of all when it does not keep "my" default settings (not C: where music is stored, and then I may end up having to recreate a libabry and sync all over (and with 80GB iPod this takes some time)!!!
-
Problems installing RAW 6.6 update
When attempting to download/install the RAW 6.6 update I get the message "Please close the following applications to continue: Adobe Bridge CS5 (Bridge.exe)". The problem is, Bridge is not open! What's causing this, and how can it be corrected?
Bridge may be loading when the system reboots and there could be a little orange (Br) in the system notification area.
If you can’t figure anything else out, then start up Task Manager (right-click on TaskBar and choose Task Manager) and do an EndTask for Bridge.exe in the Processes list. -
Problems installing 9.2.3 update
Have tried to install from safe mode to no avail, still getting alert that 'current' version of iPhoto installed on this mac must be updated through mac App store? Any simple fix out there? Thanks.
Where did this version of iPhoto come from?
If it was pre-installed on a recent machine (one that arrived with Lion installed) then you update via the App Store.
Regards
TD -
Problem installing Mac OS X Update on PowerBook G4
I'm trying to install the Mac OS X Update Combined 10.5.5 on my PowerBook G4 but it can't open the installer package. It keeps saying the Bill of Materials was not found. Are there any answers to this please?
Thanks,
ColinThe System Requirements on the update page I already mentioned
(http://www.apple.com/support/downloads/macosx1055comboupdate.html) clearly state that
*Mac OS X 10.5.1 - Mac OS X 10.5.4* is required for this update.
Is it not obvious that 10.3.9 does not meet this requirement?
You must buy Leopard (an OS upgrade ) before you can update it. -
Problem Installing ACR 5.7 Update
I have all programs closed when I try to install the Camera Raw 5.7 Update so I can edit photos in Photoshop CS4 from Lightroom 2.7. Every time I try to install, an "Installation Incomplete" window pops up saying "Please close the following application and retry to continue installing update: ADOBE BRIDGE." I have cleared the cache in Bridge, but I can't get this to install.
You probably have Bridge set to start up automatically at login. Check the Advanced section of Bridge Preferences.
Richard Southworth -
Problem installing 10.6.3 update
I am running 10.6.2 on my Mac Pro 2.93Ghz quad.
I made several attempts to install the update OS X 10.6.3.
The computer goes through the download process, but when it restarts to complete the installation, during the installation the following error message comes up:
"An error occurred during installation. None of the selected updates could be installed.
An unexpected error occurred."
"Restart"
"The update "Mac OSX Update" can't be installed. an unexpected error occurred."
Any help or suggestions will be very much appreciated.Kisuke3,
I tried your suggestions but with no success.
I went through the first three steps and when that did not work I tried the manual download.
Close to the end of installation of the manual download I received the following error message:
"There were errors with the installation. You may want to try installing again."
"The installation failed."
"The installer encountered an error that caused the installation to fail.
Contact the software manufacturer for assistance."
Thanks for your effort anyway. I do appreciate it. If you have any other ideas I'd certainly give it a go. -
Problems installing 8.0.2 update (unable to locate the product)
Hello, I'm trying to install the patch 8.0.2 for AAE CS3 on WinXP(32bit) SP3, but I'm getting a message "The updater is unable to locate the product to be updated.". Can I do something with that?
Yepp, as Jonas said, give them a call. On a guess I would assume that you installed to a non-standard path or another Adobe product has messed up the pertinent install info, but you never know, so it's best to contact phone support and explain the situation and steps taken so far.
Mylenium -
Problem installing latest 2014 CC updates
Trying to update the October updates to ai & ps--but stalls out--getting extremely tired of these issues! I am running Mac OS 10.9.5.
Zot1982 I would recommend reviewing the installation logs for the updates which are failing to install. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.
-
Problems installing Lightroom 3.2 update
Hi
I have tried, unsuccessfully to date, to download the above update. I am running L.3 on an iMac and every time I click on the file I get a message 'Illegal seek'.
Does anyone know what this means and if there's anything I can do to stop it happening?
Thanks in advance.Did you download from here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4788
or from within the popup in LR?
Maybe you are looking for
-
Importing Flash Animation AS3 into Captivate 3.0
I have some animations and interactions that were written in Flash AS3, that work fine when published in a SWF file and run with FlashPlayer 9, but they don't work at all when I import them into Captivate 3.0. In Captivate, they seem to run when they
-
Share saved optimize settings?
Optimization settings include options unavailable in distiller settings ("Discard external cross references" is of special interest). The "PDF Optimizer" screen in Acrobat Pro X includes an option for saving optimizer settings. (To reach the screen,
-
Receiver SFTP Channel giving error
Hi PI Experts, My scenario is ECC->PI->SFTP server. I am using Password based Authentication to send files to SFTP server using SFTP adapter. Now SFTP adapter giving the error like "Message could not be forwarded to the JCA adapter. Reason: com.jcraf
-
How do I get my music from my iphone back to itunes?
When I downloaded the upgraded itunes I lost all of my downloaded music from itunes but it is still on my iphone. How do I get my music from my iphone3 back to itunes without loosing it as I now have a new iphone5 and i would like the music put on
-
HT1657 I'm unable to download my movie. It says there is an error
Can't download says error