Problem installing 8.1.6 Oracle for Netware

I'm new to Oracle. I tried to install several times Oracle for Netware 8.1.6 and the Java installer says that the installation is OK.
But the file to load Oracle, ORALOAD.NCF is empty !!!
What can I do ??
Thanks in advance..

I head that the NT 8.1.6 release was delayed a bit more, possibly until March 2000 time frame.

Similar Messages

I'm having problems installing disk 2 of oracle 9iAS linux edition

I'm having problems installing disk 2 of oracle 9ias linux edition is thier anyone else having this same problem

Is it original media? The first installation disk set i received from oracle had a bad disk 2. Once I received the new set, everything was fine. You may have bad media as well.

Problems installing eLink TCP 3.1 for Tuxedo

HiI'm trieing to install eLink TCP 3.1 for Tuxedo on an NT-server.I have Tuxedo 6.5 installed already and it's working. When I try to install eLink it just says that I have to have Tuxedo 6.5 (or 6.4 or WLS) installed before I install eLink. But I do ??? How do I get around thisproblem ?Regards,Kirsi

Hi Kirsi,
Please check the installation directory where Tuxedo was installed. If you
took the default on NT, it would be installed in something like "c:\Program
Files\tuxedo". Unfortunately the space between Program and Files causes a
problem with other products correctly locating the Tuxedo installation. If
you reinstall Tuxedo into a directory such as c:\tux65 everything should be
fine.
Good luck.
Greg Bowers
"Kirsi" <[email protected]> wrote in message
news:3b7bcfa7$[email protected]..
HiI'm trieing to install eLink TCP 3.1 for Tuxedo on an NT-server.I haveTuxedo 6.5 installed already and it's working. When I try to install eLink
it just says that I have to have Tuxedo 6.5 (or 6.4 or WLS) installed before
I install eLink. But I do ??? How do I get around thisproblem ?Regards,Kirsi

Problem installing downloaded Photoshop Elements 10 for Mac

Just bought this online and downloaded but for past two days having problems on my Macbook Pro 13 running 10.7.3. After FIRST backing up my HD and formatting to non-case sensitive (what?? why did I need to do that?) then reinstalling.... I get this error:
Exit Code: 24
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 0 warning(s)
ERROR: DW001: Set payload cancelled status
ERROR: DW049: Payload {007A2A28-D6A8-4D91-9A2B-568FF8052215} has an action "install" but no resultState
ERROR: DW049: Payload {0AA9D11A-227D-45AB-A5D5-6F5F6E81D5E3} has an action "install" but no resultState
ERROR: DW049: Payload {0AF29C46-6E82-4402-9019-8A6BB0F981D4} has an action "install" but no resultState
ERROR: DW049: Payload {28B74F2E-2E70-4B44-A581-0C19F62A5D6E} has an action "install" but no resultState
ERROR: DW049: Payload {52411D2C-81DD-442F-81C7-D867F6D73491} has an action "install" but no resultState
ERROR: DW049: Payload {60CB5C6D-5B99-45D3-BAB5-E7728182101E} has an action "install" but no resultState
ERROR: DW049: Payload {6A2E619B-E4AC-433B-A648-D458CE543A96} has an action "install" but no resultState
ERROR: DW049: Payload {6F3A624B-1B72-4081-96E8-23261F389C5C} has an action "install" but no resultState
ERROR: DW049: Payload {A44863BF-8DB8-4D22-88DB-5A02BE319840} has an action "install" but no resultState
ERROR: DW049: Payload {BC5880C9-E055-4E57-826A-749E79C498C2} has an action "install" but no resultState
ERROR: DW049: Payload {BD0D6363-E961-410F-8BF4-ECD8795F3923} has an action "install" but no resultState
ERROR: DW049: Payload {E6FE3234-EA6D-4F21-AF83-E7279A985CD1} has an action "install" but no resultState
ERROR: DW049: Payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} has an action "install" but no resultState
ERROR: DW049: Payload {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} has an action "install" but no resultState
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Camera Profiles Installer: User cancelled installation
ERROR: DW001: User cancelled the operation
I must say the Adobe site does not appear very user-friendly when it comes to support and after downloading the "advisor" application it wants to send me to Windows support suggestions.
I just want to install and run - any suggestions?
Thanks.

Try to give read/write permissions to the below locations:
/Applications/Adobe*
/Applications/Utilities/Adobe*
/Library/Application Support/Adobe*
/Library/Application Support/FLEXnet Publisher/
/Library/Preferences/
/Library/Preferences/FLEXnet Publisher/
/Users/[user]/Library/Application Support/Adobe*
/Users/[user]/Library/Caches/Adobe*
/Users/[user]/Library/Caches/com.adobe*
/Users/[user]/Library/Preferences/Adobe*
Also, repair the disc permissions.
Hope that Helps!

"There was a problem installing Photoshop CC (2014)" error for a year

I've been trying to install Photoshop for over a year (haven't really needed it yet, and now I do), and get the same error every time.
It gets through about 45% of the download (always the same percentage, roughly), and then gives up and says "Installation failed--learn more."
When I click on the learn more link, I get a web page saying exactly:
<<
Exit Code: 34
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s)
FATAL: Payload 'Camera Profiles Installer_8.3_AdobeCameraRawProfile8.0All 8.0.0.15 {3E2A282C-3E78-44F4-AB5F-021300B2CEE0}' information not found in Media_db.
>>
It's always this same error.
I've had this error since the pre-release, and I suspect it has to do with being part of the pre-release program. (We're an Adobe plug-in developer, a Silver Partner--been developing plugins since before InDesign 1.0 shipped.)
Yes, I've uninstalled the Creative Cloud and re-installed a couple of times, from scratch. I've also tried the Cleaner, which hasn't helped.
I'm now officially stumped.
Can someone from Adobe help fix this?

I do not work for Adobe... you need to contact Adobe... try the chat link I posted
>do this to 300 Macs
Are you using the enterprise installer?
Team Installer http://forums.adobe.com/thread/1363686?tstart=0
http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent
And, some Mac links that may help
next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936

Problems installing version 11.1.4 for windows of iTunes

Service 'apple mobile device' (Apple mobile device) failed to start. Verify that you have sufficient privileges to start system services. This is what comes up when I'm trying to install the latest version of iTunes. Answer anyone? Thanks Brad

See Troubleshooting issues with iTunes for Windows updates.
tt2

Trying to install lightroom on desktop. Message says Installation Failed. I had no problem installing this on my laptop

Trying to install lightroom on desktop. Message says Installation Failed. I had no problem installing this on my laptop

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

Problems Installing J4680C all in one

I'm having problems installing the all in one for my j4680c. I'm getting a fatal error message. I'm runningWindows 7 64 bit.
This is the screenshot I took:

Hi @Mezron,
I see that you are experiencing issues installing the printer software. You are getting a fatal error message. Thank you for providing the screen shot of the error message. I will certainly do my best to help you.
Please download and save the latest drivers if you haven't already. HP Officejet Full Feature Software and Driver.
Turn off the Antivirus Software and the Real Time Scanning if your Antivirus Software has this feature. It can affect the full software from being installed.
Here is a example using McAffee Security Center.
Disable Real-Time Scanning and the Firewall:
Open your McAfee product located down by your clock and right click the M.
Click Navigation and select Real-Time Scanning .
Click Turn Off .
Click Navigation and select Firewall .
Click Turn Off .
Return to the main product window and verify that Real-Time Scanning and the Firewall remain off.
Close your McAfee product. The status should show that you are not protected.
Then follow this document to register Windows components, msconfig and reinstall the printer software again.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
If you have any further issues, check this document out for A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problems Installing LabVIEW

Problems Installing LabVIEW Run-Time Engine for Ubuntu 11.04
I'm relatively new to Ubuntu and its community, but have been pleasantly surprised with how easy troubleshooting has been. Unfortunately, I've spent the last two days trying to install the LabVIEW Run-Time Engine, but keep coming up short.
I've tried a number methods from the following threads to no avail:
The problem I'm having now is that despite having the ia32-libs, here is what comes up:
Input: "sudo alien - k --scripts labview-2009-rte-9.0.1-1.i386.rpm"
Response: "labview-2009-rte-9.0.1-1.i386.rpm is for architecture i386; the package cannot be built on this system".
Alien is required because Ubuntu isn't compatible with the .rpm format.
Your help would be immensely appreciated since we use LabVIEW programs to display, manipulate and simulate our spectra.
SZD91
Argumentative Essay

Hey there I'm not too familiar with Ubuntu but you may find some help in the following areas: Linux Users is a group that helps out other linux users. Also labview for linux (Ubuntu 64-bit) my help, people were having a pretty active discussion in there.
I'm guessing you're using the installer from here: LabVIEW Run-Time Engine 2011 -Linux?
Scott A
SSP Product Manager
National Instruments

Problem installing ODAC for Oracle Server 11g

I have installed Oracle Server 11g (OS:Windows XP)
Questions:
1. I tried installing ODAC for Oracle Server 11.1.0.6.21, then its giving the following error message: "Oracle data access components can only be installed over an existing oracle server 11g".
2. We have a Monorail application running on NHibernate using ODP.NET. It's working perfectly when I run it on my Visual Studio 2008.
But, when I tried to host this application, it gave me the following error message: "The provider is not compatible with the version of Oracle client"
Please suggest how to resolve these issues.

Hi
Could that be related to the %ORACLE_HOME% ?
I've read that on the ODAC installation guide:
On a machine without Visual Studio .NET 2003 installed, ODAC products now work if they are installed in a new Oracle Home
So it should be performed in a new %ORACLE_HOME% and not the same as the database. Please change that and retry.
Source:
http://www.oracle.com/technology/software/tech/windows/odpnet/install11106.html
On your second question :
Q: I get an error: "Unable to load DLL (OraOps.dll)". How do I fix this?
A: First, ensure the OraOps.dll file is in your Oracle bin directory (e.g. d:\oracle\ora92\bin\). Next, check that your Oracle bin directory is in the Windows system path. If either of these are not present, re-install ODP.NET. Depending on the application, you may have to restart the application (e.g. Windows Service) or reboot the computer (e.g. ODP.NET install makes changes to the PATH) for ODP.NET installation to be complete. If your ODP.NET installation is still not working, you may be running into this problem.
Source:
http://www.oracle.com/technology/tech/windows/odpnet/faq.html#DLL
Let us know if it helps?
thanks
Edited by: Hub on Oct 23, 2008 9:30 PM

Problems Installing Oracle 9i Client

I got problems while I'm trying to Install Oracle 9i Client on a Windows 98 PC.
When I run Setup.exe file, nothing happens, I cant See Setup dialogs.
Somebody knows what is happening.
I appreciate some help
Best regards

This was posted by someone else sometime ago. I'm posting it again for your reference. hope this helps.
raja
You must read carefully the following steps here. If you previously installed any Oracle's products on your machine, I strongly recommend you to clean up thoroughly before install the new products.
================================================================
Uninstallation
The easiest way to remove ALL traces of Oracle software, for an 8i installation, is:
(1) Using regedit, remove the key \\HKEY_LOCAL_MACHINE\\SOFTWARE\ORACLE.
(2) Remove all the Oracle services (usually called Ora-something) from \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
(3) Go to the ORACLE_HOME directory (usually C:\Oracle\Ora81). Go to the BIN directory beneath this. Rename the file OCIW32.DLL to something like OCIW32.OLD.
(4) Reboot your box.
(5) Once you have logged on again, delete the directories C:\Program Files\Oracle and C:\Oracle.
(6) Right-click on My Computer, select Properties->Environment. Edit the environmental variable PATH to remove all refernces to files in the two directories you have just deleted.
(7) Remove the Oracle folders from your Start menu.
*** Obviously, using regedit on your machine always entails risks, and I won't be held responsible if you end up trashing your system. However, the above procedure is one I have used many times with complete success. You have been warned! ;) ***
As to logging on, the "standard" Oracle accounts are:
SYS/change_on_install (SYSDBA - database owner)
SYSTEM/manager (Owns various VIEWs and utility PACKAGEs)
and (optionally):
SCOTT/tiger (Training account containing some sample tables)
If you're using PO8i on the local machine, you shouldn't need to worry about setting up NET*8 (Oracle's networking protocols)
=================================================================
Windows 95 and 98
This will remove all Oracle products, Oracle services, and Oracle registry entries from your computer.
Complete the following steps to create a Clean Machine. Backup any relevant databases before proceeding!
On Windows 95 and Windows 98:
1. Ensure you shutdown your Oracle. Right click on the Oracle Icon in the toolbar and click on the shutdown option.
2. Un-install all your Oracle products if possible. Use universal installer to do that. Ignore this step if you dont have universal installer on your machine.
3. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
4. Delete the ORACLE key.
5. Edit your AUTOEXEC.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path setting.
6. From the Windows Explorer (or from the command prompt), delete the Oracle directory (Oracle Base).
7. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
8. Delete Icons from <system_drive>: \Windows\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Windows\StartMenu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
9. Reboot your computer.
On Windows NT:
1. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle Services through Control Panel Services. Use universal installer to un-install your Oracle products. Ignore un-install if you dont have universal installer on your machine.
3. Using regedit (at the command prompt, type regedit), go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and delete the ORACLE key.
4. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services that begin with ORACLE.
5. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application that begin with ORACLE.
6. Close regedit.
7. From the Control Panel, open System.
8. If JRE was installed by Oracle, remove the %ORACLE_HOME%\BIN path and the JRE path. For example, you may see a path similar to this one: C:\ORACLE\ORAxx\BIN;G: \Program Files\Oracle\jre\1.1.7\bin. Go to Start > Control Panel > System > Environment tab. Click on the system variable path and modify the path.
9. Delete Icons from <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
10. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
11. Reboot your computer.
12. Delete all ORACLE_BASE directories (You can find the Oracle homes listed in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ORACLE_HOMES).
================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

Problem Installing Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64

Hi,
I am having problems installing the Oracle Client 11g R2 64 bit installation on my Windows 7 64 bit Enterprise machine. The installer does all the checks successfully, it gets me to summary screen and I press finish to start the installation. It then opens the installation mask where it first says Checking whether Central Inventory is locked by another OUI session. After that it very briefly shows Central Inventory is not locked and then the window immediately dissapears with no other errors. I tried installing at my colleague's W7 Enterprise 64 machine and it behaves a little differently but with the same result. Basically on his machine it never even opens the Install mask, when pressing finish from the Summary it just disappears and never starts installation. I tried installing 11g R1 and that loads the first mask and when i press next it just dissapears. I basically need an oracle client 64 bit installation on my machine deperately. Please help. Thanks
Alex

One user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap.

Problem in Installing Forms 6i in Oracle 8

Hi there
I am a home user and at the moment studying for OCP Oracle Forms Developer Rel. 6/6i and I really need some good help.
I have some problem in the Installing the Orcale Forms 6i, I have already installed WinNT4 (Server) and Oracle 8.
SO far I have tried to Install Forms 6i four times but I failed. Due to this reason every time I had to also Uninstall the Oracle 8
from my system, because it started to give problems.
OK THIS IS THE PROBLEM :
When I installed Oracle 8, the user name was <system> and the password was <manager> in the SQL Plus. I used it for few times and worked fine. But when I installed the Oracle Developer 6i the SQL Plus didn't accepted the same user name and the password. I tried many commands that I could find in the Oracle documentations (On the CD) but so far nothing.
Need some command or any thing to over write the system so I can change the user name and password.
Plus when I use turn on my computer and run WINNT 4 (server) I get message that I have some problem in Oracle80.exe file and due to that my system hangs for couple of minutes.
I also want the sample tables, but I don't know the particular command for SQL *PL by which I can get the sample tables.
Please help me by suggesting what shall I do.
Regards
Mustafa
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by martin vonk ([email protected]):
Hi...
Source: Oracle support.........:-)
Installation Procedure
Follow this procedure to install Developer 6.0 and Oracle 8i on the same physical machine in separate ORACLE_HOMEs on NT:
1) Install Developer 6.0 using the instructions on the Developer CD.
Specify an appropriate drive and the ORANT directory as the destination. For example:
D:\ORANT
Note: You must install Developer in the Oracle home named DEFAULT_HOME.
2) Install RDBMS 8.1.5 from the Oracle 8i CD. Specify the following information when prompted for the Oracle Home and Full path:
Oracle Home ora8i
Full Path d:\orant\ora8i
Choose Typical Install
Global Database Name ora8i.us.oracle.com (This is an example)
SID ORA8I (This is an example)
As the product installs, a summary is displayed that shows the products that are installed and the space requirements.
When the installation is complete, the following information is displayed and the installer exits:
Oracle Database Configuration Assistant Alert Database Creation Completed.
Database Information
Global Database Name ora8i.us.oracle.com
SID ORA8I
Sys password change_on_install
System passwd manager
3) A TNSNAMES entry needs to be created in the tnsnames.ora file for the new Oracle 8i installation. You can find the file in:
d:\orant\net80\admin\tnsnames.ora
A default entry will look like this:
alias.world
(DESCRIPTION
(ADDRESS_LIST
(ADDRESS
(PROTOCOL = TCP)
(Host = )
(Port = )
(CONNECT_DATA = (SID = )
For example, if you installed on a machine with a HOSTNAME of TEST, a SID named ORA8I, on TCP/IP with port 1521, and an alias of NEW, you would create the following entry:
NEW.world
(DESCRIPTION
(ADDRESS_LIST
(ADDRESS
(PROTOCOL = TCP)
(Host = TEST)
(Port = 1521)
(CONNECT_DATA = (SID = ORA8I)
4) If you manually created the entry, save and close the tnsnames.ora file.
You can now connect to the local database instance of 8i using the DBSTRING as NEW. For example, you can connect as scott/tiger@NEW.
HTH
Martin<HR></BLOCKQUOTE>
null

Licensing problems installing JDriver for MS SQL Server

I've been having problems for some time now creating a connection pool in WL 5.1 using the MS SQLServer4v70 JDriver. I am at wits end and haven't been able to find a solution or find anybody that could give me a solution. Below is a better description of the problem including exact error messages and configuration.
There's some simple problem here, but I'm not an
installation expert. Would you please post this to
the support.install group? If you don't get help
quickly from there, let me know.
JoeAt 09:54 AM 10/31/00 -0800, you wrote:
Here's the exact error message:
Tue Oct 31 09:52:09 PST 2000:<I> <WebLogicServer> IIOP subsystem enabled.
weblogic.common.LicenseNotFoundException: Could not find licensing file:
Your WebLogic license file, named either WebLogicLicense.xml or
WebLogicLicense.class must be located in a directory that is
in your CLASSPATH. By default, your license file is located in the
/license directory located in your WebLogic home directory
(the root directory of your WebLogic installation).
As of version 4.0 of WebLogic, a new XML-format license file has
replaced the older, compiled class format license file.
The WebLogic Server will recognize either format.
For additional information on WebLogic licenses or on setting your
classpath, see the i
stallation instructions in the WebLogic Server documentation, available at
http://e-docs.bea.com/
my weblogic class path looks like:
CLASSPATH Prefix c:\weblogic\mssqlserver4v70\classes
CLASSPATH
c:\weblogic\mssqlserver4v70\classes;c:\jdk1.3\lib\tools.jar;c:\jdk1.3\jre\li
b\rt.jar;c:\jdk1.3\jre\lib\i18n.jar;C:\weblogic\license;C:\weblogic\classes\
boot;C:\weblogic\cla
sses;C:\weblogic\lib\weblogicaux.jar;C:\weblogic\eval\cloudscape\lib\cloudsc
ape.jar
JAVA_HOME c:\jdk1.3
WEBLOGIC_LICENSEDIR C:\weblogic\license
WEBLOGIC_HOME C:\weblogic
system properties:
java.security.manager
java.security.policy==C:\weblogic\weblogic.policy
weblogic.system.home=C:\weblogic
java.compiler=symcjit
weblogic.class.path=C:\weblogic\license;C:\weblogic\classes;C:\weblogic\myse
rver\serverclasses;C:\weblogic\lib\weblogicaux.jar
INITIAL_HEAP 64 MB
MAX_HEAP 64 MB
SERVERCLASSPATH
c:\weblogic\mssqlserver4v70\classes;c:\jdk1.3\jre\lib\rt.jar;c:\jdk1.3\jre\l
ib\i18n.jar;C:\weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudsc
ape.jar
Type "wlconfig -help" for program usage.
The license file is attached:
-Matt
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, October 31, 2000 8:41 AM
To: Matthew Heaton
Subject: RE: Problems creating connection pool
At 04:35 PM 10/30/00 -0800, you wrote:
Still having problems with it not finding the licenseOk, what is the exact failure message? Does the server start fine?
Then it's finding the server license in the weblogiclicense.xml file.
Is it then failing to find the driver license? If so, show me your
editted xml license file.
Joe
Currently nothing related to the driver is in my classpath and
c:\weblogic\mssqlserver4v70\classes is in my weblogic classpath. I deleted
the license folder for the driver after moving the guts of it into the main
weblogic license file.
-Matt
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Monday, October 30, 2000 3:46 PM
To: Matthew Heaton
Subject: Re: Problems creating connection pool
Hi Matt.
You did the right thing adding the driver to the weblogic.class.path.
That's where it should be, not in the java.class.path. The current
licensing issue is that the weblogic server has(had?) it's own copy of
WebLogicLicense.xml, containing the server licenses. The one from thedriver
is now in the path. It contains the driver license, but not the server
stuff. Edit the server one, adding the guts of the driver one, and
delete the driver xml license file from your path.
Joe
Matt Heaton wrote:
This is a problem that has been a roadblock for me for a while, I'm usingWL 5.1 and trying to create a connection pool with the MS SQL server 4v70
JDriver.
Here is the code to create the connection pool:
weblogic.jdbc.connectionPool.SQLPool=\
url=jdbc:weblogic:mssqlserver4:MATTHEWH1:1433,\
driver=weblogic.jdbc.mssqlserver4.Driver,\
initialCapacity=1,\
maxCapacity=2,\
capacityIncrement=1,\
props=user=AceUser;password=AceUser;server=MATTHEWH1
I've addedc:\weblogic\mssqlserver4v70\classes;c:\weblogic\mssqlserver4v70\license to
my class path, but I was getting a class not found exception when Weblogic
tried to make the connection pool. I then added
c:\weblogicmssqlserver4v70\classes to my Weblogic classpath and got the
following error:
weblogic.common.LicenseNotFoundException: Could not find licensing file:
Your WebLogic license file, named either WebLogicLicense.xml or
WebLogicLicense.class must be located in a directory that is
in your CLASSPATH. By default, your license file is located in
the
/license directory located in your WebLogic home directory
(the root directory of your WebLogic installation).
As of version 4.0 of WebLogic, a new XML-format license file has
replaced the older, compiled class format license file.
The WebLogic Server will recognize either format.
For additional information on WebLogic licenses or on settingyour
classpath, see the in
stallation instructions in the WebLogic Server documentation, available
at
http://e-docs.bea.com/
So I tried adding c:\weblogic\mssqlserver4v70\license to the weblogicclasspath and got yet a different error:
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Loaded License : C:/weblogic/license/WebLogicLicense.xml
However Unable to start because :
No License found for WebLogic
As well as the fact that: No License found for Tengah
As well as the fact that: No License found for WebLogic/JDBC
As well as the fact that: No License found for Tengah/JDBC
As well as the fact that: No License found for jdbcKona/T3
WebLogic Server terminated with an abnormal condition of 1
What do I do? I've tried everything I can think of, I was able to getthis to work the first time that I tried to do it but everytime I've tried
since then this happens.
-Matt--
PS: Folks: BEA WebLogic is in S.F. with both entry and advanced positions
for
people who want to work with Java and E-Commerce infrastructure products.
Send
resumes to [email protected]
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application
Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component
Architecture
http://www.bea.com/press/awards_weblogic.html
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application
Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component
Architecture
http://www.bea.com/press/awards_weblogic.html
Attachment Converted: "c:\eudora\attach\WebLogicLicense11.xml"
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component Architecture
http://www.bea.com/press/awards_weblogic.html

Eric Ma wrote:
Joe:
Connection is a LOCAL variable declared in each method. DataSource is an instance
variable.That sounds fine... let me see your code (main block plus finally block). How long does this
take to reproduce? Show me your pool definition.
thanks,
Joe
>
>
Eric
Joseph Weinstein <[email protected]> wrote:
Eric Ma wrote:
I was given the unfortunate task :-) of getting data out of M$FT SQL6.5. I set
up a JDBC connection pool using jDriver in mssqlserver4v65.jar, andcreated a
JDBCDataSource for the pool. I am using a stateless session bean +JDBC (with
the DAO pattern) to get data. In the DAO class I have an instancevariable for
the datasource, which I look up in the constructor. In the DAO's businessmethod
I RELIGIOUSLY call datasource.getConnect() first, and ALWAYS call connection.close()
in the finally block. Now the initial requests are fine, but aftera while I
got a weblogic.common.ResourceException telling me there were no moreconnection
available in the pool. Is this a jDriver bug? I never run into sucha problem
with an Oracle connection pool using the thin driver.
Any insight will be greatly appreciated.
Eric MaHi. Is the connection object an instance variable? That would be a problem.
The connection object has to be a method variable to be safe from multithreading
issues.
Joe

Problem installing oracle 8.1.5 as local database, Help me!

Hello, my friends!
I've been having problems with the connection to oracle 8.1.5 via ODBC. Does Exist any way to install a protocol that no requieres a net like TCP, SPX. I have a pc in my house and I'm not in a networking, so when i configure a tnsnames it requieres a protocol, and it shows: TCP, SPX, IPC, named pipes, which of them are for a Local PC, because i configured a tnsnames with TCP protocol and the connection via ODBC shows the message: 'Server rejected the connection'. My application and the database are in the same PC, so i'm accesing via ODBC to the database locally.
so, i'd appreciate any help, please, any comments send me an email to : [email protected]
Aldemar cuartas
Colombia

hi,
Please confirm that your media(oracle 8.1) is for Intel Solaris or for Sun Sparc (RISC).
bye
[email protected]

Problem installing 8.1.6 Oracle for Netware

Similar Messages

Maybe you are looking for