Problem installing additional options after upgrade to 8.1.7.4
Hi all,
the installer gives me a bit of a problem. I installed 8.1.7 without intermedia and upgraded the installation to 8.1.7.4.
Now I need to install intermedia onto the same ORACLE_HOME. I do this from the 8.1.7.0 cd-rom.
But before I can select only to install intermedia, the installer says that there is an higher version of the database installed in de ORACLE_HOME and the installer can not continue and suggests to install into a different ORACLE_HOME.
I tried to install from the 8.1.7.4 staging area, but that way one can only upgrade allready installed opptions.
The only option I have left to try is to install into a different ORACLE_HOME and manually copy everything into the exsisting ORACLE_HOME. But I'm affraid that would leave me with a buggy installation (the installer not knowing what is going on and such).
I'm sure I'm not the first to do this.
Ideas anyone?
TIA
Robin Betjes
Might as well respond to my own posting, since this is still at the top of a google search for UTL_NLA invalid.
The only solution is to either use transportable tablespaces , exp/imp, or expdp/impdp to move your data over to a fresh 10.2.0.3 or 10.2.0.4 system. The problem occurs due to database originally in 32-bit mode being upgraded to 64-bit 10.2.0.3 prior to applying 10.2.0.3 patches 5892355 and 5871314. Applying these two patches after you have already upgraded it 10.2.0.3 will not help. The corruption enters during the Oracle upgrade process and once present is unfixable. We pushed oracle support for a long time but never got a workable fix.
Similar Messages
-
Problems installing RSAT tools after upgrade to Win10x64Ent
I upgraded my Windows 8.1x64 Enterprise installation with RSAT installed (Windows8.1-KB2693643-x64.msu) to the 10x64 preview, en-us to en-us. When I tried to install the new RSAT tools (WindowsTH-KB2693643-x64.msu) post-installation, it failed with the following
message to the event logs:
Fault bucket , type 0
Event Name: WindowsUpdateFailure2
Response: Not available
Cab Id: 0
Problem signature:
P1: 7.9.9841.0
P2: 80244017
P3: 52F76761-FCD6-450B-A647-2EBE0D2E4AF1
P4: Download
P5: 101
P6: Unmanaged {7971F918-A847-4430-9279-4A52D1EFE18D}
P7: 0
P8:
P9:
P10:
Attached files:
C:\Windows\WindowsUpdate.log
C:\Windows\SoftwareDistribution\ReportingEvents.log
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_7.9.9841.0_3e6c31fcb863b96a2a3a4e5cb743aaa410271937_00000000_cab_222e3bf0
Analysis symbol:
Rechecking for solution: 0
Report Id: 4df2e54c-4a79-11e4-95d3-2c27d72f22d6
Report Status: 4
Hashed bucket:Looks like the problem was that the update was officially already installed. I found that running the Windows Update troubleshooter fixed it, but since the help didn't seem to have the troubleshooter as easily attached as it has been in the past, I used
the Windows 8.1 update Fixit from this page:
https://support2.microsoft.com/kb/971058?wa=wsignin1.0
Confirmed that after running this, the update successfully installed, AGPM integrated successfully, and I was once again able to peek at our GP vault. -
Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.
The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go. -
Problem Installing Additional Memory -- Older G4 15"
I am having a problem installing additional memory this computer:
Machine Name: Powerbook G4 15"
Machine Model: Powerbook 5,2
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
CPU Speed: 1 GHz
L2 Cache (per CPU): 512 KB
Memory: 256 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.7.1f1
Serial Number: V734***RY
The symptoms are the same as those described here:
http://docs.info.apple.com/article.html?artnum=303173
Any suggestions?
Thanks.
Tom
Powerbook 5,2 Mac OS X (10.4.5)tguild,
Our PB's are sensitive to the memory used - cheap memory typically doesn't work, although the raw specs, PC2700 DDR SDRAM, may meet Apple's published specs. Three brands that seem to consistently work in our PB's are Crucial, Kingston, and Samsung (which is used by Apple as factory fill). Both Crucial and Kingston have memory selectors on their site, so you get the correct RAM (Crucials fitment guarantee requires you use their memory selector).
Crucial is available from www.crucial.com, Kingston from www.kingston.com (choose specials/promotions/25% off notebook memory for a reduced price), and one source for Samsung chips is OWC at www.macsales.com.
So, make sure you've got quality memory. Your PB serial number is outside the range covered by the Apple repair program. I would make sure that with quality memory, it's doing what you want it to do before shipping it off for repair. Some with the lower socket issue have chosen to use one RAM strip in the upper slot, and not pay for repair. I've seen estimates of $350 and up to repair it for those not covered by the repair program, and some have lucked out by having their local Apple store fix it, even though it's outside the serial number range.
You only have 256mb today - OS X really likes more memory, so if you can upgrade to at least 512mb, or even 1gb, you'll be happier with the performance. -
Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1
Hi,
We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
Thanx
deepakWhat kind of problems?
I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
This is your best bet.
If you still have problems, contact NI and ni.com/ask and start a support inquiry. -
Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1
There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public. -
Why I am facing signal problem in my 4s after upgrade to os 5.0.1
Why I am facing signal problem in my 4s after upgrade to os 5.0.1 and how can I solve it
Hi, i also got the same problem. pls let me know if there any luck.
01738855651
Tusher
Thanks Man -
I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found
You have to go to autherized iPhone agent.
-
Why don't we have hotspot option after upgrading to iOS 8.1?
why don't we have hotspot option after upgrading to ios 8.1 ?
Did you already update the carrier settings? The hotspot feature is provided by the carrier. Follow the steps in this article:
iOS: Updating your carrier settings -
I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.
It is best to wait till there is a 10.9.1 update as new OS X systems always cause problems to some installations. Better not to risk losing data unless you have a bootable clone that enables you to revert to the original (pre upgrade) state. Haste makes waste.
Check this thread if you wish to see what I am talking about.
https://discussions.apple.com/community/mac_os/os_x_mavericks -
TS3276 Has any one had problems finding RSS feeds after upgrading to 10.8?
Has any one had problems finding RSS feeds after upgrading to 10.8?
RSS feeds no longer appear in Mail in Mountain Lion (nor in Safari). You'll need a separate RSS application.
BTW, this forum is for Mac OS X 10.7 Lion. The forum for OS X 10.8 Mountain Lion is this one:
https://discussions.apple.com/community/mac_os/os_x_mountain_lion
Regards. -
Problem to access https after upgrade 8.4
Hi, i try to upgrde a new device with no config inside... I put the asa and asdm file in the device (last release), then i simply remove the old asa and the old asdm.
No the https:192.168.1.1 is no longer accessible.
There is my config : Wats wrong ?
ASA Version 8.4(1)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-641.bin
no asdm history enable
arp timeout 14400
object network obj_any
nat (inside,outside) dynamic interface
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.2-192.168.1.254 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:635fe2f7c278eb79cacb80ba4054cf36
: end
And my flash :
ciscoasa(config)# show flash
--#-- --length-- -----date/time------ path
3 4096 Feb 23 2011 06:39:32 log
88 1868412 Jun 06 2007 13:35:44 securedesktop-asa-3.1.1.29-k9.pkg
89 398305 Jun 06 2007 13:36:08 sslclient-win-1.1.0.154.pkg
91 24938496 Feb 23 2011 06:30:14 asa841-k8.bin
92 15841428 Feb 23 2011 06:34:02 asdm-641.bin
6 4096 Feb 23 2011 06:39:46 crypto_archive
93 1513 Feb 23 2011 08:25:36 7_2_2_0_startup_cfg.sav
11 4096 Feb 23 2011 06:40:04 coredumpinfo
12 59 Feb 23 2011 06:40:04 coredumpinfo/coredump.cfg
94 1189 Feb 23 2011 06:40:04 upgrade_startup_errors_201102230640.log
95 1189 Feb 23 2011 08:25:42 upgrade_startup_errors_201102230825.log
127111168 bytes total (83673088 bytes free)
Thx for your helpThe insuficient memory can be a problem ?
Startup :
CISCO SYSTEMS
Embedded BIOS Version 1.0(12)6 08/21/06 17:26:53.43
Low Memory: 632 KB
High Memory: 251 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 01 00 1022 2080 Host Bridge
00 01 02 1022 2082 Chipset En/Decrypt 11
00 0C 00 1148 4320 Ethernet 11
00 0D 00 177D 0003 Network En/Decrypt 10
00 0F 00 1022 2090 ISA Bridge
00 0F 02 1022 2092 IDE Controller
00 0F 03 1022 2093 Audio 10
00 0F 04 1022 2094 Serial Bus 9
00 0F 05 1022 2095 Serial Bus 9
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(12)6) #0: Mon Aug 21 19:34:06 PDT 2006
Platform ASA5505
Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
Launching BootLoader...
Default configuration file contains 1 entry.
Searching / for images to boot.
Loading /asa841-k8.bin... Booting...
Platform ASA5505
Loading...
IO memory blocks requested from bigphys 32bit: 9672
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
Starting check/repair pass.
Starting verification pass.
/dev/hda1: 100 files, 10605/31033 clusters
dosfsck(/dev/hda1) returned 0
Processor memory 109776896, Reserved memory: 41943040
Total SSMs found: 0
Total NICs found: 10
88E6095 rev 2 Gigabit Ethernet @ index 09 MAC: 0000.0003.0002
88E6095 rev 2 Ethernet @ index 08 MAC: 001b.d594.e226
88E6095 rev 2 Ethernet @ index 07 MAC: 001b.d594.e225
88E6095 rev 2 Ethernet @ index 06 MAC: 001b.d594.e224
88E6095 rev 2 Ethernet @ index 05 MAC: 001b.d594.e223
88E6095 rev 2 Ethernet @ index 04 MAC: 001b.d594.e222
88E6095 rev 2 Ethernet @ index 03 MAC: 001b.d594.e221
88E6095 rev 2 Ethernet @ index 02 MAC: 001b.d594.e220
88E6095 rev 2 Ethernet @ index 01 MAC: 001b.d594.e21f
y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 001b.d594.e227
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode : CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.06
Verify the activation-key, it might take a while...
Running Permanent Activation Key: 0xc42d647c 0x0ca7d748 0x30e37928 0x9520e800 0x432e03ab
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 20 DMZ Unrestricted
Dual ISPs : Enabled perpetual
VLAN Trunk Ports : 8 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Standby perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 25 perpetual
Total VPN Peers : 25 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has an ASA 5505 Security Plus license.
Cisco Adaptive Security Appliance Software Version 8.4(1)
****************************** Warning *******************************
This product contains cryptographic features and is
subject to United States and local country laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does not
imply third-party authority to import, export,
distribute, or use encryption. Importers, exporters,
distributors and users are responsible for compliance
with U.S. and local country laws. By using this
product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S.
and local laws, return the enclosed items immediately.
A summary of U.S. laws governing Cisco cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by
sending email to [email protected].
******************************* Warning *******************************
Copyright (c) 1996-2011 by Cisco Systems, Inc.
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
** *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING *** **
** ----> Minimum Memory Requirements NOT Met! <---- **
** Installed RAM: 256 MB **
** Required RAM: 512 MB **
** Upgrade part#: ASA5505-MEM-512= **
** This ASA does not meet the minimum memory requirements needed to **
** run this image. Please install additional memory (part number **
** listed above) or downgrade to ASA version 8.2 or earlier. **
** Continuing to run without a memory upgrade is unsupported, and **
** critical system features will not function properly. **
Reading from flash...
Cryptochecksum (unchanged): 7a620e51 b4671e2e 0fb4a7b2 b61f13da
Type help or '?' for a list of available commands.
ciscoasa> -
Can't install newest iphoto after upgrading to Yosmite
Hi guys,
After upgrading my OS to Yosmite, my iPhoto icon has a "no-entry" icon covering over it. When I tried to open, it asks for an update. When in the app store, I can't seem to install the newest iPhoto app. Anyone experiencing the same problem and able to rectify it?I can't seem to install the newest iPhoto app.
What happens when you try? -
Problem with dual boot after upgrade to Mountain lion
Hello Every One,
I have a Macbook pro from 2009 which had dual boot option Windows 7 + Snow Leopard.
The windows 7 had 2 partitions (C; and D: an extended partition).
I upgraded the OS X to Mountain lion. after upgrade the system showed 3 options at boot time. Mac, Windows and a recovery partition.
when i boot to windows the D: drive is gone...I mean even though i can see the partition in partition software, windows 7 stopped showing D: in "My computer".
So i used testdisk utility to get the D: drive back and now when i boot to mountain Lion i am able to access both C:(BOOTCAMP) and D: drives.
but now the problem is during boot time my Mac Book pro doesn't show the windows option.
Can some suggest a means to boot into windows 7? Also what is the purpose of recovery partition that Mountain lion adds to the system? I mean is it going to hurt if i get rid of it so that i can go back to my old configuration of 3 primary partitions (1 for windows 7 ...C: bootcamp + MountainLion) + 1 extended partition for D:
any help would be appreciated?
RegardsRagu79 wrote:
Also what is the purpose of recovery partition that Mountain lion adds to the system? I mean is it going to hurt if i get rid of it
Leave it: http://support.apple.com/kb/HT4718 -
Unable to open Bootcamp install of Vista after upgrading MacBook Pro / Mid 2010 to OS Mavericks
Dear Community,
I am unable able to boot the Windows Vista install (via Boot Camp) on my MacBook Pro / mid 2010 after upgrading to OS Maverick.
Any idea about how this problem can be solved (I don't want to purchase Windows 7 and I don't want to purchase a virtual machine)?
Many thanks for your support!
Regards,
PSeguroHello 88,
I haven't resized / modified anything since installing Vista on my System. The problem must have incurred when upgrading from Snow Leopard to Maverick.
by the way:
I (just) found out that Windows Vista is booting (automatically) when I insert my original "Mac OS X Install DVD" / 10.6.3 (or my "Applications Install DVD") before starting the MacBook. It will - hwr - not boot without above DVDs in the tray...
sudo fdisk /dev/disk0:
Disk: /dev/disk0 geometry: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 510699696] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 511109336 - 1269544] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 512378880 - 464394240] HPFS/QNX/AUX
sudo gpt -r -vv show disk0:
gpt show: disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 976773167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 510699696 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
511109336 1269544 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
512378880 464394240 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120 15
976773135 32 Sec GPT table
976773167 1 Sec GPT header
Regards,
Maybe you are looking for
-
IPhone messed up before I was able to back it up, it messed up my apps...
I had been experiencing various app crashes and a general slow-running system on my iPhone, so I decided that it would be best if I restored it. However, before I was able to do so, my iPhone completely crashed and I was forced to do a restore withou
-
My iPhone 4 is not recognized by Windows 7 but syncs with iTunes.
Driver fails to load. Device manager considers my iPhone a MTP USB. I have deleted and re-installed iTunes with no resolution. I have read several strings regarding Autoplay. Nothing seems to work.
-
Update 8.1.3 is 1.49gb
I waited a month to download the 8.1.3 update to my 16gb iPhone 5 to make sure it didn't introduce any new problems for others or was followed by another immediate update. Today I clicked "download only" in iTunes on my Mac and to my surprise it's do
-
How do I access data on a macbook with a broken screen?
My MacBook Pro screen is not working. I am taking it to the Genius bar, but they say I should back up my data. How do I do that with no screen? I DO have an older MacBook, as well as thumb drive, but don't know how to hook them up to treat the disfun
-
Text Message A Contact That Switched To Droid
I have a friend that used to have an iPhone, and iMessaging with her was great. Except that she switched to a Droid device recently and can't receive my texts now because my phone keeps sending them as an iMessage. I haven't switched to iOS 6 yet.