Problem installing Analysis Services in Tabular Mode

I am trying to install Analysis Services in Tabular mode to a server where I have already installed Analysis services in Powerpivot mode and in regular mode.  I am following the instructions below and when I get to the screen below the tabular mode
option is greyed out.  What do I need to do?
http://blog.quasarinc.com/ssas/installing-sql-server-2012-analysis-services-tabular-mode/

Hi Racand,
Which editions of SQL Server 2012 you are using? The Tabular option is only available for Enterprise and Business Intelligence editions. Please refer to the link below to see the details.
Features Supported by the Editions of SQL Server 2012
If you have any questions, please point it out.
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

  • Connection problems to Analysis Services (local)

    Hi everybody,
    I can not access to "Analysis Services" in local way with SQL Server Management Studio. I get the following error: 
    "Unable to establish a connection. Make sure the server is running. (Microsoft.AnalysisServices.AdomdClient)"
    "You can not establish a connection because the target machine expressly rejected that connection 127.0.0.1:2383 (System)"
    I have checked the related services and they are running: 
    SQL Analysis Services (InstanciaName) - En ejecución - LocalSystem
    SQL Server  (InstanciaName) - En ejecución - LocalSystem
    SQL Server Reporting Services  (InstanciaName) - En ejecución - LocalSystem
    SQL Server Agent  (InstanciaName) - En ejecución - LocalSystem
    SQL Server Browser   (InstanciaName) - En ejecución - LocalSystem
    I have checked that the only port whitch is listening is the 2382, and not the 2383:
    C:\Windows\system32>netstat /abo | findstr 238
      TCP    0.0.0.0:2382           ServerName:0             LISTENING       2016
      TCP    [::]:2382                 ServerName:0             LISTENING       2016
    Any idea about what is causing the problem?
    Thank you.
    Best regards, 

    Thanks for your reply,
    The list of services running is the following, before it was an example:
    SQL Analysis Services (ALTIRIS) - En ejecución - LocalSystem
    SQL Server  (ALTIRIS)
    - En ejecución - LocalSystem
    SQL Server Reporting Services  (ALTIRIS)
    - En ejecución - LocalSystem
    SQL Server Agent  (ALTIRIS)
    - En ejecución - LocalSystem
    SQL Server Browser   (ALTIRIS)
    - En ejecución - LocalSystem
    ALTIRIS is my instancename.
    When I try to connect, I put "(local)" in the SQL Server Management Studio, but I get the error.
    Best regards, 

  • Problem Installing Virtual PC for XP Mode in Win 7 Pro(64) SP1

    XP Mode has successfully installed, but Virtual PC has not. Installing Virtual PC requires only a Windows Update, so I downloaded the correct file -- Windows6.1-KB958559-x64-RefreshPkg.msu. When I try to install it I get that this update is already installed
    on my computer, but I still don't have Virtual PC.
    What now?
    Thanks for any guidance that can be offered.
    Rob

    Installing Virtual PC requires only a Windows Update...
    Kinda/sorta.
    <QP>
    To use Windows XP Mode, you need to download and install Windows XP Mode, and Windows Virtual PC, the program that runs virtual operating systems on your computer.
    When you install a program in Windows XP Mode, the program becomes available for use in both Windows XP Mode and Windows 7.
    To download and install Windows XP Mode
    Go to the Windows XP Mode page in Download Center.
    Under Quick Details, select your language.
    Click Continue and follow the instructions on the screen to validate your copy of Windows 7.
    Select a version of Windows XP Mode to install and click Install.
    Note:              Windows XPMode_N versions don't include Windows Media Player.
    Click Run in your browser's message bar, and follow the instructions on the screen.
    When setup is completed, click Finish.
    To download and install Windows Virtual PC
    Go to the Windows Virtual PC page in Download Center
    Under Quick Details, select your language.
    Click Continue and follow the instructions on the screen to validate your copy of Windows 7.
    Select a version of Windows Virtual PC to install and click Install.
    Note: The x64 version works with 64-bit versions of Windows 7.  The x86 version works with 32-bit versions of Windows 7. To find out if your PC is running 32- or 64-bit Windows 7, click the
    Start button , right-click
    Computer, and then click Properties. 32-bit and 64-bit information appears next to
    System type.
    Click Run in your browser's message bar, and follow the instructions on the screen.
    Click Yes to install Update for Windows (KB958559).
    If you accept the license terms, click I Accept.
    After installation is complete, click Restart Now to restart your computer.
    To set up Windows XP Mode for first use
    Click the Start button , click
    All Programs, click Windows Virtual PC, and then click
    Windows XP Mode.
    <figure class="embedObject"><figcaption class="caption">                   
    Windows Virtual PC and  Windows XP in the list of programs         </figcaption></figure>
    If you accept the license terms, click I accept the license terms, and then click
    Next.
    On the Installation folder and credentials page, accept the default location where Windows XP Mode files will be stored, or choose a new location.
    Type a password, type it again to confirm it, and then click Next.
    On the Help protect your computer page, decide whether you want to help protect your computer by turning on automatic updates, and then click
    Next.
    Click Start Setup.
    After setup is complete, Windows XP Mode opens in a separate window.
    </QP>
    Source & more:
    http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
    ~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

  • Problem with Location Services in Flight Mode

    Hi!
    Several times before it happened, that the Location Services symbol appeared in the status bar during Flight Mode and only disappeared several minutes after leaving Flight Mode. Up til now this never posed a problem as I usually plug in my Z10 over night.
    Yesterday before going to bed I had 30% left and thought, that this would be sufficient to survive the night and that i'll plug it in in the office. Alas, I was woken up at arround 6am by my phone turning itself off.
    When I looked at the Device Manager i found something quiet startling: During the whole time Flight Mode was active (approx. 23:00 - 0600), Location Services where active as well, draining the remaining 30% of battery. (See pictures)
    My Device is a Z10STL100-3, OS is 10.2.1.3175.
    No App was running nor was an Active Frame open.
    Does anyone have a clue, why this happened or what caused this? Anyone with similar experiences?
    And more important: how can i fix this?
    Kind regards,
    Uwe

    I saw a resemblance to a user in the Spanish forum mistake is perhaps as happens on the foursquare application was always working and location feature enabled.
    Follow me in Twitter:
    @Marcossit
    BBM Channel:
    MarcossitDev: C0002C366  
    DeviceSuite For BlackBerry 10:
    Link to Download DeviceSuite:
    Free
    Pro 0.99$
    Support was successful? Accept as Solution and click on:

  • Problem installing Fulfillment service

    Hi!
    We are installing ACS 4 in a Tomcat 6 in a Linux box. Packaging and admin services are working fine. But fulfillment service is returning an "Http error core - 500" en running status check.
    From the Tomcat log file:
    java.io.IOException: failed to decrypt safe contents entry: javax.crypto.BadPaddingException: Given final block not properly padded
          at com.sun.net.ssl.internal.pkcs12.PKCS12KeyStore.engineLoad(PKCS12KeyStore.java:1277)
          at java.security.KeyStore.load(KeyStore.java:1185)
          at com.adobe.adept.fulfillment.security.ServerConfig.init(ServerConfig.java:115)
          at com.adobe.adept.fulfillment.security.ServerConfig.getSigningURL(ServerConfig.java:48)
          at com.adobe.adept.fulfillment.servlet.FulfillmentServerStatus.getServers(FulfillmentServerS tatus.java:34)
          at com.adobe.adept.common.servlet.Status.checkUp(Status.java:355)
          at com.adobe.adept.common.servlet.Status.doGet(Status.java:421)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
          at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
          at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
          at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
          at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
          at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
          at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
          at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
          at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
          at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852)
          at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.ja va:588)
          at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
          at java.lang.Thread.run(Thread.java:619)
    Caused by: javax.crypto.BadPaddingException: Given final block not properly padded
          at com.sun.crypto.provider.SunJCE_f.b(DashoA13*..)
          at com.sun.crypto.provider.SunJCE_f.b(DashoA13*..)
          at com.sun.crypto.provider.PKCS12PBECipherCore.b(DashoA13*..)
          at com.sun.crypto.provider.PKCS12PBECipherCore$PBEWithSHA1AndRC2_40.engineDoFinal(DashoA13*. .)
          at javax.crypto.Cipher.doFinal(DashoA13*..)
          at com.sun.net.ssl.internal.pkcs12.PKCS12KeyStore.engineLoad(PKCS12KeyStore.java:1274)
          ... 20 more
    1/Fev/2010 16:36:56 org.apache.catalina.core.StandardWrapperValve invoke
    SEVERE: Servlet.service() for servlet Status threw exception
    java.lang.Error: Problem reading key and certificate from keystore
          at com.adobe.adept.fulfillment.security.ServerConfig.init(ServerConfig.java:201)
          at com.adobe.adept.fulfillment.security.ServerConfig.getSigningURL(ServerConfig.java:48)
          at com.adobe.adept.fulfillment.servlet.FulfillmentServerStatus.getServers(FulfillmentServerS tatus.java:34)
          at com.adobe.adept.common.servlet.Status.checkUp(Status.java:355)
          at com.adobe.adept.common.servlet.Status.doGet(Status.java:421)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
          at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
          at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
          at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
          at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
          at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
          at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
          at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
          at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
          at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852)
          at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.ja va:588)
          at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
          at java.lang.Thread.run(Thread.java:619)
    My fulfillment.conf:
    #------- Common Properties -----------
    #-- Logging Properties -------
    com.adobe.adept.log.level=trace
    com.adobe.adept.log.file=/srv/acs/log/fulfillment.log
    #-- Database Properties ------
    com.adobe.adept.persist.sql.driverClass=com.mysql.jdbc.Driver
    com.adobe.adept.persist.sql.connection=jdbc:mysql://192.168.1.118:3324/acs
    com.adobe.adept.persist.sql.dialect=mysql
    com.adobe.adept.persist.sql.user=acsuser
    com.adobe.adept.persist.sql.password=laranja
    #----- Fulfillment-specific Properties --------
    com.adobe.adept.serviceURL=http://srv-acs.portoeditora.pt/fulfillment
    com.adobe.adept.fulfillment.security.licensesignURL=https://eusigningservice.adobe.com/licensesign
    com.adobe.adept.fulfillment.security.pkcs12.file=/cert/operator.p12
    com.adobe.adept.fulfillment.security.keystore.user=operator
    com.adobe.adept.fulfillment.security.keystore.password=****
    I've read the installation, faq and everything else related to ACS4. No clue on what is wrong.
    Can anyone help me? Ideas?
    Best regards,
    Miguel

    Hello!
    I've found the solution. The documentation is misleading the right certificate creation. In the last step, when generating the operator.p12 file, the export password is aked. In the documentation, nothing is said, but you have to enter the certificate password you used in the first step. After doing this, status check gives an "all green".
    Thanks everyone for trying to help.
    Best regards,
    Miguel

  • Problem Installing: Web Services Developer Pack 1.3

    I am trying to setup an environment to develop and deploy a web application with jsp & servlets. When i tried to install the web services developed pack i got the following error found in the log file. I also just installed the j2sdk 1.4.2_03 and i have set my class path to the new java folder.
    Any help would be great.
    -Chris
    (Feb 7, 2004 5:16:21 PM), Install.product.install, com.installshield.product.service.product.PureJavaProductServiceImpl, wrn, Parent Component with UID = a8182b517735a528d4f8baa8438a8985 of installed Component with displayName = JAXP Version 1.2.4 (Java API for XML Processing) was not found in the VPD.
    (Feb 7, 2004 6:01:11 PM), Install.product.install, com.installshield.product.service.product.PureJavaProductServiceImpl$DiskSpaceCheck, wrn, String index out of range: -1
    (Feb 7, 2004 6:01:30 PM), Install.product.install, com.sun.jwsdp.installer.SaveEnvironmentVariablesAction, err, An error occurred and product installation failed. Look at the log file /usr/jwsdp-1.3/log.txt for details.
    (Feb 7, 2004 6:01:30 PM), Install.product.install, com.sun.jwsdp.installer.SaveEnvironmentVariablesAction, err, java.lang.NoClassDefFoundError
    STACK_TRACE: 13
    java.lang.NoClassDefFoundError
         at com.sun.jwsdp.installer.SelectJVMPanel.<init>(SelectJVMPanel.java:85)
         at com.sun.jwsdp.installer.SaveEnvironmentVariablesAction.install(SaveEnvironmentVariablesAction.java:177)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5149)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4532)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3727)
         at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:40)
         at java.lang.Thread.run(Thread.java:534)
    (Feb 7, 2004 6:01:31 PM), Install.product.install, com.installshield.product.service.product.PureJavaProductServiceImpl, wrn, Parent Component with UID = a8182b517735a528d4f8baa8438a8985 of installed Component with displayName = JAXP Version 1.2.4 (Java API for XML Processing) was not found in the VPD.
    My screen output when i got the error
    Installing Java(TM) Web Services Developer Pack 1.3. Please wait...
    |-----------|-----------|-----------|------------|
    0% 25% 50% 75% 100%
    |||||||||||||||
    Errors occurred during the installation.
    - An error occurred and product installation failed. Look at the log file
    /root/jwsdp-1.3/log.txt for details.

    Look at the log file /usr/jwsdp-1.3/log.txt for details.Doesn't the log file tell you what's wrong? From the error messages, the installer (InstallShield?) couldn't find some class. Review all of the install instructions, paying particular attention to the setting of environment variables like PATH and CLASSPATH, etc. You might want to check at the Installshield site for further information, also.

  • Analysis Services Evaluation Standard downgrade

    Hi
    I installed Sql Server 2012 Evaluation Edition.
    After I downgraded it back to a properly-licensed Standard edition the Analysis Services service would not start, complaining:
    "MSSQLServerOLAPService: “The service cannot be started: … The 'Analysis Services in Tabular Mode' feature is not included in the '64 Bit Standard' edition of Analysis Services"
    I can understand what this is telling me, and I see that Tabular Model is not part of Standard Edition.
    My question is this:
    Is there something I can do to remove the unlicensed features, or do I need to uninstall and reinstall the whole kit and caboodle?
    Thanks
    jim

    You've to un-install and re-install it from scratch
    http://technet.microsoft.com/en-us/library/jj674204.aspx
    Upgrade a deployed Tabular model database to SP1 compatibility level
    You can upgrade an existing deployed Tabular model database to SP1 compatibility level in SQL Server Management Studio (SSMS) by using theCompatibility Level property
    in Database Properties. In order to upgrade, the computer on which the SQL Server Analysis Services instance is installed must have SP1 installed.
    You cannot downgrade a deployed Tabular model database from SP1 to an earlier version.
    -Prashanth

  • How to get data from MySQL into Analysis Services Tabular Model

    Hi,
    I have a problem with Analysis Services Tabular Model and MySQL ... I have to use several MySQL databases as a source of Tabuar Model ..
    Is there any way to get connection working from Tabular Model to retrieve data from MySQL database. I have a situation that in MySQL server there is several databases with same schema, one for each customer. I have planned to join these customer databases
    to one Tabular Model, create roles and users for each customer to query their data.
    What do I have to do to get this working ?
    Pasi

    Hi ,
      In Tabular model out of the box there is no direct connectors available for MySQL. Please see the list of supported Data Sources
    http://msdn.microsoft.com/en-us/library/gg492165.aspx
    But i think if you can establish a ODBC connectivity with data source to MYSQL , you can use the ODBC connection to retrieve the data from MySQL. Please try this and post the results here if it is possible or not.
    Best Regards Sorna

  • Installing Reporting Services in Sharepoint Integration Mode

    1) One WEF Server - WEFServer
    2) Sharepoint App Server - SPAPPServer
    3) SQL Database Server for cubes - SQLCubeServer; The Cube server has data from some external resources/data sources.
    4) SQL Database Server - SQLDEServer
    We want to install Reporting Services in Sharepoint Mode to generate Reports for SQLCubeServer Data.
    Please suggest what needs to be installed for Reporting Services and where?

    For performance purposes, SSRS should be installed on the WFE server.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

    Hi,
    We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
    Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service.  Possible causes include: the service is either not installed or the specified service name is invalid.
    Any help is much appreciated.
    Thanks

    Hello,
    The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
    Sean Gallardy | Blog |
    Twitter

  • Non visual totals in Analysis Services Tabular

    Are there any work-a-rounds to achieve non-visual totals in Analysis Services tabular? This is a crucial feature for some of our clients and is preventing them from adopting this technology due to this feature not being available out of the box
    as with Multidimensional OLAP.  If not, are there any plans to introduce this feature for Analysis Services tabular models?

    Hi Geoff3c,
    As you know SQL Server Analysis Services (SSAS) Tabular only supports visual totals. This is a differences between Analysis Services OLAP and Tabular that SSAS OLAP provides one feature that SSAS Tabular does not: non-Visual Totals. It was considered that
    non-visual totals are not terribly common, but some developers have worked for clients where non-visual totals were required.
    If you have any concern about this feature, you can submit a feedback at
    http://connect.microsoft.com/SQLServer/Feedback and hope it is released in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
    in the following release after official confirmation.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • SQL Server 2012- Reporting Services in SharePoint Mode

    I would like to use Reporting Services in Native mode but I also installed Reporting Services in SharePoint Mode. Do I need to remove the Shared Feature of Reporting Services in SharePoint Mode and if so how would I do this?
    Thanks
    Kit52

    http://technet.microsoft.com/en-in/library/bb326407%28v=sql.105%29.aspx
    Happy to help! Thanks. Regards and good Wishes, Deepak. http://deepaksqlmsbusinessintelligence.blogspot.com/

  • Imapact of SQL Server Analysis services

    Hi 
    What will be the impact of installing analysis services on an existing SQL Server database which is shared among different web applications Project Server 2013 (PWA) and other SharePoint Applications?In my
    environment SQL Server database is shared between PWA and another sharepoint web applicaiton, so before installing I want to understand its impact on database and the other SharePoint Web application.
    Please help
    Himanshu
    Himanshu

    I may impact your Server and SQL Server performance significantly. 
    This is a common architecture in which both the SQL Server relational DB Engine and Analysis Services instances are running on the same server. In this scenario, it is absolutely crucial to override the defaults for both instances in order to prevent resource
    contention, memory pressure, and (in the worst case) memory exception errors.
    Consider
    SQL Server memory configuration after installing Analysis services, which includes
    Minimum Server Memory 
    Maximum Server Memory
    Minimum Memory per query (only for advance users)
    At the same time you have to set the
    memory configuration for SSAS engine also you have to consider
    LowMemoryLimit
    TotalMemoryLimit
    HardMemoryLimit
    Remember, other than SQL Server and Analysis service other application in your server will be consuming memory. And the most important part is to leave memory for OS to run properly. 
    So, General formula to set Hard limit of SSAS could be (but not limited to)
    Hard Memory Limit = Total Physical Memory - SQL Server Instance min - OS memory (include other application too)
    Disclaimer: Above formula is just for demonstration purpose only; should not be applied
    on production without complete analysis. 
    Worth to notice that SSAS does create its own database for cube so other than memory you need to plan about disk space (if you have limited space)

  • SSAS 2012 Tabular. Analysis Services Query Log not working

    Hello.
    It is possible to configure Analysis Services Query Log on SSAS 2012 Tabular (11.0.3321) server? Or this feature works only with Multidimensional server mode?
    It is not a problem for me to configure Query Log on Multidimensional server. But when I'm trying to do this in Tabular server result is always the same: table S_OlapQueryLog created but no data there.
    This problem exist in our production server. And is fully reproduced in test environment. This problem was reproduced with SQL 2012 RTM, CU4, SP1 and SP1 CU1.
    I tryed to configure Analysis Services Query Log by using SQL account. Later by using windows authentification. Accounts was db owners. Later I have used accounts with sysadmin rights. Results was the same.
    In msmdsrv.log i can find only related events like this:
    (12/7/2012 9:22:59 PM) Message: The query log was started. (Source:
    \\?\P:\Olap\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210003)
    (12/7/2012 9:25:03 PM) Message: The query log was stopped. (Source:
    \\?\P:\Olap\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210004)
    I'm stuck completely with this functionality. So if someone was much luckier than I please write to me.
    Regards
    Audrius

    I agree with Gerhard's comments, but there are a couple of additional points
    - I am not 100 percent sure if queries that are answered by the SE cache are recorded in the query log
    Queries answered by the SE cache are not definitely not recorded in the QueryLog. So depending on the types of queries and the design of your cube you could possible miss a large proportion of the actual end user queries.
    The QueryLog records the QuerySubcube events and there are zero to many of these generated for a given end user query (zero if the query can be answered from cache). The optimizer may also choose to pre-fetch a wider range of data or to break a single range
    into a few smaller requests so it is not a true indication of the actual query that the end user generated.
    Doing a trace is the only way to catch the actual queries submitted by end users.
    http://darren.gosbell.com - please mark correct answers

  • Service accounts for the Workspace Database service permission Error while creating Tabular Mode from PowerPivot

    Hi All,
    Please help me out against this issue. I have spent so much (3 working days) time just figuring out what is the issue and its solution.
    I am learning Tabular Mode and trying to create a mode based on PowerPivot model. I am getting following error message:
    'The PowerPivot workbook could not be imported. The service account for the workspace database server does not have permission to read from the PowerPivot workbook.'
    Here is my infrastructure:
    1. SSAS in Tabular Mode is installed on my Windows 8 Laptop
    2. PowerPivot is also in my laptop
    3. There is only my account (as Admin of course) for SSAS
    Here are my questions:
    1. What is this error and how can I cope with that? A step by step explanation would be highly appreciated :-)
    2. Do I need to change something in Windows settings or in SSAS?
    3. I am confused about my workspace database server as well, Do I have to install SSAS twice; one for development and one for workspace?
     Looking forward for the expert advise.
    Tahir
    Thanks, TA

    Hi,
    I suspect you might have more luck if you try the SSAS forum: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlanalysisservices
    Regards
    Jamie
    ObjectStorageHelper<T> – A WinRT utility for Windows 8 |
    http://sqlblog.com/blogs/jamie_thomson/ |
    @jamiet |
    About me

Maybe you are looking for