Problem installing bluetooth software

I have a u330 and I just did a fresh install of windows vista. I installed the bluetooth drivers with no success. I can't seem to see it under my control panel nore has anything been added which i can access to check settings. Has anyone had experience doing this that would be willing to guide me?

Maybe you should install ACPI, hotkeys and Energy Management first?
//help will save the world

Similar Messages

  • I am having problems installing new software for my ipod i keep getting a message that the network has timed out.  I have tried two different computers and networks what else can I do?

    I am having problems installing new software for my ipod
    I keep getting a message that the network has timed out. 
    I have tried two different computers and networks what else can I do?

    Try temporarily disabling your firewall and anti virus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • Having real problems installing new software been on updating I cloud now for 4 hours anyone else having this problem

    Having real problems installing new software I have been on the updating I cloud screen now for over  hours has anyone else experienced this?

    Glad I am not the only one its frustrating

  • Problems installing BB software

    Problem installing Bberry decsktop manager on windows 8 laptop help

    Take a quick look at the Blackberry Desktop Software requirement to make sure its all compatible.
    IS their any type of error that pops up when you try to install?
    http://us.blackberry.com/software/desktop/desktop-​pc/system-requirements.html

  • Problem installing new software (stuffit, haven't tried others yet)

    Hi!
    I'm the happy owner of a brand new (the laptop pro, 17") but I have a little problem:
    I wanted to install Stuffit (I downloaded it from the Internet), but when I try to drag it to the Applications folder, it says "the operation cannot be completed because you do not have sufficient privileges for some of the items".
    I don't understand, because the computer is mine, I'm the only user, and I've checked, I have read & right access to the folders.
    Could someone tell me what's wrong or how I can get to finish installing this software?
    (I want to buy some softwares online, but what's the pointif I can't install them!)
    Thanks!

    yes, I need it, to decompress sit files.
    I tried again, with a game, a dmg file, but it won't let me paste the installed file in the applications folder (just like the stuffit, who was originally a dmg file)
    I don't get it!

  • Problem installing printer software

    i downloaded:
    HP LaserJet Full Feature Software and Driver
    This full software solution is the same solution as the in-box CD that came with your printer. NOTE: Due to the size of this download, HP recommends dial-up customers order this software on CD. Online ... More details
    Released: 2014-09-17  |  Size: 212.67M
    Version5.0
    then ran "the install printer software"
    clicked "connected to usb" and it said trying to connect, then said it had found it
    now the software says its "installing HP Laserjet Pro M1212/1213/1214/1216 MFP Series" and is stuck in a loop. the progress bar grows, completes then starts again but the installation is not progressing. 
    Any ideas anyone? Its driving me crazy (I've tried stopping and restarting a number of times. 

    Hi @toppairtel ,
    I see that you are experiencing issues installing the printer software. I would be happy to help you.
    Disconnect the USB cable and uninstall the software using the CD.
    Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
    I would disable all the Startup programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
    Then run the installation again, immediately after connecting the USB cable, follow the steps in this document to update the drivers so it doesn't error out again. A Fatal Error Displays During Software Installation. Then the installation should continue.
    Test the printer.
    Then enable all the Startup items and turn off any Antivirus Software.
    Let me know how you make out.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Problem installing (any) software

    I've installed Yosemite recently.
    When iTunes 12.0.1 came out it did not install.
    Searched for that and found some similar problems and solutions but could not solve my problem.
    Now I realized that it is not just iTunes... nothing install.
    The installer just stops in the middle without any message.
    Found this in /var/log/install.log.
    Please help.
    Thanks in advance.
    Nov 13 11:37:59 iMac.local Installer[5527]: LSExceptions [0x6000000bb780] loaded
    Nov 13 11:37:59 iMac.local Installer[5527]: @(#)PROGRAM:Install  PROJECT:Install-920
    Nov 13 11:37:59 iMac.local Installer[5527]: @(#)PROGRAM:Installer  PROJECT:Installer-815
    Nov 13 11:37:59 iMac.local Installer[5527]: Hardware: iMac11,2 @ 3.60 GHz (x 4), 8192 MB RAM
    Nov 13 11:37:59 iMac.local Installer[5527]: Running OS Build: Mac OS X 10.10 (14A389)
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: PWD=/temp
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: USER=joao
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: SECURITYSESSIONID=186a8
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: LANG=pt_PT.UTF-8
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: LOGNAME=joao
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: TERM=xterm-256color
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: DISPLAY=/private/tmp/com.apple.launchd.uqBM7Mct6U/org.macosforge.xquartz:0
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: PATH=/opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/opt/local/b in:/opt/local/sbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/us r/local/MacGPG2/bin
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: SHLVL=1
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: TERM_PROGRAM_VERSION=343
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: Apple_PubSub_Socket_Render=/private/tmp/com.apple.launchd.M2Kuy1if1n/Render
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: SSH_AUTH_SOCK=/private/tmp/com.apple.launchd.HjKtJgkJEj/Listeners
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: TERM_SESSION_ID=FC2F477B-5C24-4D12-822B-52CE548DA65C
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: HOME=/Users/joao
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: _=/usr/bin/open
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: SHELL=/bin/bash
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: OLDPWD=/Users/joao
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: __CF_USER_TEXT_ENCODING=0x1F7:0x0:0x0
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: TMPDIR=/var/folders/qc/pypcqs1d6ys99p4c31xtqfs00000gq/T/
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: TERM_PROGRAM=Apple_Terminal
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: XPC_SERVICE_NAME=com.apple.installer.28148
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: SSH_AUTH_SOCK=/private/tmp/com.apple.launchd.HjKtJgkJEj/Listeners
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: Apple_PubSub_Socket_Render=/private/tmp/com.apple.launchd.M2Kuy1if1n/Render
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: DISPLAY=/private/tmp/com.apple.launchd.uqBM7Mct6U/org.macosforge.xquartz:0
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: XPC_FLAGS=0x0
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: LOGNAME=joao
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: USER=joao
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: HOME=/Users/joao
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: SHELL=/bin/bash
    Nov 13 11:37:59 iMac.local Installer[5527]: Env: TMPDIR=/var/folders/qc/pypcqs1d6ys99p4c31xtqfs00000gq/T/
    Nov 13 11:37:59 iMac.local Installer[5527]: Office 2011 14.4.6 Update  Installation Log
    Nov 13 11:37:59 iMac.local Installer[5527]: Opened from: /temp/Office 2011 14.4.6 Update.pkg
    Nov 13 11:37:59 iMac.local Installer[5527]: Product archive /temp/Office 2011 14.4.6 Update.pkg trustLevel=202
    Nov 13 11:38:09 iMac.local Installer[5527]: LSExceptions [0x6000000bb780] unloaded
    Nov 13 11:38:13 iMac.local Installer[5527]: InstallerStatusNotifications plugin loaded

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Problems installing the software

    Hi, I have a laptop sony viao, pentium 4 version 2002 with windows XP and I installed itunes and when I connect the ipod it says that the software is not installed properly and to installed and reinstalled again, but I did that like five times and it's not working, I did that in other computer, a dell pc and there i didn't have problems, can you help me??
    My ipod it's a fifth generations 30gb.

    Why don't you try to update the drivers of the adapter instead?
    Please check this link:
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=60bf6ddc3b5e417a8c72d601b2346552_21484.xml&pid=80&...

  • Problem installing Ipod software

    I have a brand new nano but cannot get the software installed. OS is XP home SP 2, fully updated. Problem started trying to install from CD -- I get InstallShield error 1608 -2147024894. I have done everything on the InstallShield site that was suggested for that error.
    I have gotten the latest programs from Apple sites -- I could install iTunes + Quicktime (installer works ok on them, had a little trouble with Quicktime but finally got it installed. iTunes runs fine but refuses to work with the nano (it says to reinstall ipod/itunes). I got a new IpodSetUp.exe from the web, but it gives exactly the same InstallShield error as the original one on the CD. I double checked the 1608 procedures, turned off virus programs, etc, nothing helps. I have not had any trouble installing other programs lately, and computer is operating normally. My computer setup is fairly extensive and I would hate to risk an XP repair, so hope someone has some other ideas.
    Thanks much,
    David

    I'll reply to my own question -- I got it working, though I'm not really sure how. It might have helped running the install in Safe Mode - THAT didn't work (error 1607) but the next time I went back to normal mode I finally got ipodsetup.exe to run all the way through -- but then it still didn't recognize the nano, so I changed USB ports and did a Reset and a few other things and all of a sudden it started to working. I transferred music, listened to it on nano, etc. I'm keeping my fingers crossed.
    I probably spent 10 hours on this silly thing, but NOW it is pretty cool. Oh well, maybe if apple makes a few billion on these things they can afford to hire 1 or 2 windows programmers and make the install work a little better. And I never have seen why they can't make the USB thing, plug/play etc, work better - that's mickey soft's fault for sure.
    Best
    David

  • Problem installing any software or repairing

    i have this problem. recently my phone doesn't seem to communicate with my pc. i used to. there were no other major installations or anything else
    when i opened BB Link software, it says there is an update
    so upon setting up the new update, the installer says there is an error : The account already exists
    so i tried to uninstall the software. same problem.
    i downloaded the newest version, and tried to install it there. same problem.
    now when i try to repair the software, it is looking for the version's .msi file, which i don't have.
    i am trying to repair version 1.2.3.23 and update to the latest version 1.2.3.55
    please can someone give me a solution to this problem. i really want to connect my phone back to my pc to access files
    Solved!
    Go to Solution.

    rosspurdy just want to say the next time you want to post a question click New Message at the top of the page and start your own post as most times you will be answered faster and also it is not fair to the original poster as they will benotified when you post. 

  • Problem installing solutions software on HP officejet pro 8500 A909a

    I've tried everything including trying to install directly from the temp 7zip folder by clicking on the HP setup icon to no avail including install wizards and print and scan doctor.  exhausting, please help.

    Hello there jrolandbrown,
    Welcome to the Forums
    I would like to help you the best I can with this issue you are having installing the printer software.
    Please respond to me with which operating system you are running and I will look into this for you.
    Thanks!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problems installing DLNA software

    Hi again, I have had good support from the community in the past and I wonder if anyone can help me with the installation of DLNA server software?
    I installed the JRiver Media Centre yesterday with a fully paid licence.
    However I find that the software is not visible in my Launcher or in the applications folder.
    It seems that after a reboot I have to invoke its .dmg file and perform an installation to get it up and running again, with leads me to think that I have to tweak this installation a bit to get it fully up and running.
    Ideally I would like the server to load at start up and remain so until a system close down.
    I am running OS X Yosemite on a MAC book by the way.
    I have fired a similar question at the JRiver forum, but no response as yet.
    John

    Folks I will answer my own query on this one and it has been resolved by moving the Jriver Media Center icon to the dock.
    Not sure why some applications do this automatically, but this is fine detail.

  • Problems installing various software

    I keep having troubles installing things. I get to the "Select a destination" stage and then I can't select one. I get a message at the bottom of the installer saying "Some volumes are unavailable until the Installer has finished processing.", but it just sits there like that indefinitely. I don't know what to do. This has happened multiple time with various software, some of which was free, but other stuff I paid for. Any ideas?

    A Warm Welcome to the forums Robin!
    1st we need to do a couple of things to find out were solid ground might be...
    Using Disk Utility in Mac OS X 10.4.3 or later to verify or repair disks...
    http://docs.info.apple.com/article.html?artnum=302672
    About Disk Utility's Repair Disk Permissions feature...
    http://docs.info.apple.com/article.html?artnum=25751

  • Problems installing iPod software with iTunes

    I get the message "The software for this ipod is not installed correctly. Please reinstall iTunes to install the required software." I have reinstalled iTunes and still get this message.  I have the latest version of iTunes installed (11.1.4.62) running on Windows 7.  Any suggestions?Problems

    Hi welcome to Apple Discussions!
    Yes, I do know what could be the issue. Your computer may be confusing your iPod with a different drive (thus not recognized or keeps repeatedly asking to name iPod).
    In this case the thing to do is try assigning your iPod a different drive letter. in "Control Panel".
    Go to "START -> Control Panel".
    Click on "Administrative Tools" (if you can't see it, switch to the "classic view" in the left panel).
    Go to "Computer Management", then "Disk Management" button in the left area.
    Right-click on your iPod there, and click on "Change Drive Letter and Paths...". Change the letter to something like "M" or "N" (further along in the alphabet).
    It should look like this picture:
    For more details, see this articke , which basically says and explains the same thing:
    Assigning your iPod a different drive letter
    I hope this solves your issue
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • Problems Installing Educational Software

    I have a program called Calliou Ready for School. The operating system requirements for the program is system 8.6-10.2. It also requires a 200 MHz PowerPC processor. When I try installing it (I have 10.4.8) it says "Error Copying files over. Please check if you have suffiicient permissions to run this program." Any ideas why I can't install it?
    Thanks for your help.
    Jenny

    Nevermind. I figured it out.

Maybe you are looking for