Problem installing Circuit Design Suite - "Error while initializing resource loader"

I am attempting to install v 10.0.1 of the Circuit Design Suite (Education and Student Edition). Immediately after starting the install process I get the message "Error while initializing Resource Loader!" and the installer exits. My computer meets the minimum system requirements (512 MB RAM, 20 GB free hard drive space, Windows XP, etc).
Any suggestions for how to work around this problem so I can get Multisim installed?

Hi John,
I'm not sure if you still have issues with the Multisim installer. But just in case here are some comments:
Are you using a CD to install Multisim? If yes, try copying the installer to your hard drive.
Try installing Multisim on a different machine.
Apparently the Resource Loader is related to Java, try un-reinstalling it, upgrading to the latest release, etc.
Let us know how it works,
Fernando D.
National Instruments

Similar Messages

Problem installing Circuit Design Suite

I'm trying to install the Circuit Design Suite10.1.1 on to a 64-bit Wnidows 7 Enterprise installation. Right after the installer has me specify the destination directory, I get the following error:
***Error: Windows SDK function returned an error. (Error Code -12)
***End Error Report
When I close that error, the installer closes. Has anyone else encountered a similar problem? I've seen that error reported on the boards here, but in other circumstances.
Additional information:
Along with Circuit Design, I'm also installing ELVISmx 4.1.0. There are no other NI products installed on this machine. Let me know whatother info I should provide.

Ummm.... what does this have to do with LabVIEW?
Not knowing anything about that product, other than it's for schematic capture, I'd say you are having the same problem that others who have tried to install older versions of LabVIEW on Windows 7 are having: Windows SDK Error (-12) when Installing LabVIEW on Windows 7.

Problems installing ISE Design Suite 14.7

I try to download ISE Design Suite - 14.7 Full Product Installation.
After a couple of hours the file is downloaded.
After that i unzip the file and start the installation from bin\xsetup.exe
The installation wizard starts and after a couple of seconds i get an error.
Unable to open archive, Please check file permissions.
I checked that but nothing is wrong.
What could the problem be? I also tried with ISE Design Suite 14.6 but i get the same error.
Thanks in advance

Hello ,
Here are a couple of threads which can help to solve the problem
http://forums.xilinx.com/t5/Installation-and-Licensing/ISE-ds-win-13-3-o-76xd1-0-idata-ise-0068-zip-xz/td-p/190806
http://forums.xilinx.com/t5/Installation-and-Licensing/Unable-to-open-archive-xz-on-Windows-7-64-bit/td-p/92430/page/2

Vista Circuit Design Suite - DEP

I'm running Windows Vista Home Premium, last reformat was 2 months ago, no issues until after installing Circuit Design Suite 10.0.144.
After installing, Windows began throwing me Data Execution Prevention (DEP) errors during startup.
The error reads something like this "Data Execution Prevention has closed Parts of Logos"
First of all, Logos is a brilliant name... try searching google for more information about it .
Anyways, upon returning zero relevant results for the error string, I bightened up a bit because at least I didn't have some form of malware.
After doing a search of my computer all results were relates to folders named logos or dlls and msis.
All contained within a folder called National Instruments, which brings me here.
The next step was to examine what services belonged to National Instruments and opened on startup.
I found:
National Instruments Domain Service
National Instruments PSP Server Locator
National Instruments Time Synchronization
NI Service Locator
1) Are all of these services installed with Circuit Design?
2) Are they all necessary to load on Start-Up? (I only use the software once a week or so)
3) Whoever designed it does know that loading services on startup is bad... right?
I opened the Event Viewer next to find the exact exe causing the problems. In the starup sequence, the only error is with nidmsrv.exe. The error message is below:
"Faulting application nidmsrv.exe, version 4.7.0.44, time stamp 0x44c69afd, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x736f6700, process id 0x3d0, application start time 0x01c80ea9d20316d8."
When searching for the executable, I found it located in "F:\Program Files\National Instruments\Shared\Security" F being the partition where I install any unessential software.
4) Solutions? Ideally I'd like to just turn the services off so they don't execute during startup, but you should really fix this too. I wouldn't have bothered you if I wasn't confident that the problem is with your software, thanks for your time.
Message Edited by rpk5000 on 10-14-2007 08:25 PM

Hi rpk5000:
These services are installed with Circuit Design Suite. They primarily for the LabVIEW runtime engine. I cannot tell you what will happen if you set them to disabled (it is not supported), but you may encounter errors when using some of the LabVIEW functionality.
There is an update to Circuit Design Suite, 10.0.1 (also known as 10.0.343), that supports Vista. The version you are running 10.0 (also known as 10.0.144), is not supported on Vista.
You can get the update through the Support and Upgrade Utility or from the website (I prefer ftp: ftp://ftp.ni.com/support/circuitdesignsuite/10.0.1/, then select the appropriate link depending on which version you have.)
Garret
Senior Software Developer
National Instruments
Circuit Design Community and Blog
If someone helped you, let them know. Mark as solved or give a kudo.

Startup error message while starting up Windows after installing NI Circuit Design Suite 10

Hi.
I recentely acquired NI Circuit Design Suite Student Edition v10.
After installing it on my computer I began receiving the following error message everytime I booted up Windows.
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the Windows logs and found other error messages when the system booted:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date:  12-01-2008
Time:  13:17:54
User:  N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6e 69 64   ure nid
0018: 6d 73 72 76 2e 65 78 65   msrv.exe
0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 30   ffset 00
0048: 37 66 63 36 36 66         7fc66f
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1004
Date:  12-01-2008
Time:  13:18:51
User:  N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6e 69 64   ure nid
0018: 6d 73 72 76 2e 65 78 65   msrv.exe
0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 30   ffset 00
0048: 37 66 63 36 36 66         7fc66f
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1001
Date:  12-01-2008
Time:  13:21:33
User:  N/A
Computer: THINKPADT30
Description:
Fault bucket 619997672.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 42 75 63 6b 65 74 3a 20   Bucket:
0008: 36 31 39 39 39 37 36 37   61999767
0010: 32 0d 0a                  2..
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7034
Date:  12-01-2008
Time:  13:18:12
User:  N/A
Computer: THINKPADT30
Description:
The National Instruments Domain Service service terminated unexpectedly. It has done this 1 time(s).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the forums at NI and found a similar problem with a computer with Windows Vista installed. I have Windows XP Professional installed on the computer, but tried the update through the self updating feature of the NI software.
After the update the problem remains exactly the same.
To find out more about the error, I checked several Windows properties to identify the cause of the problem. One thing I found was on the Services control, under Administrative Tools. After the error message during boot, the services window shows up 2 services whose status is "Stopping" and the startup type is "Automatic". This services are:
Lookout Citadel Driver
National Instruments Time Sincronization
I'm using an IBM ThinkPad T30 (Type 2366-BG1) with Windows XP Professional with 768Mb of memory, 80GB HDD.
Can anyone give me some hints on this matter?
Thank you in advance.

Good morning.
I tried the steps suggested but the problem remained. I then decided to try some aditional steps and apparently the problem is solved. I describe the steps I took bellow.
The problem was related to my antivirus / firewall solution, Panda Antivirus + Antispyware 2007.
1. I changed the previously mentioned Windows services startup to "Manual" instead of "Automatic".
2. Rebooted the computer.
3. Opened the services control in Administrative Tools.
4. Selected the first service "Citadel..." and pressed the "Start" button.
5. After a few seconds, the firewall solution presented a window stating that the program was attempting to access the internet (or my LAN). I selected "Always allow".
6. I repeated this step for all the others NI services. Some produced the same feedback, others didn't.
7. Changed the startup type of the services to the values I had written down before.
8. Rebooted the computer and everything worked fine.
It seems my firewall solution is unable to cope with a program trying to access the Internet (or network) before a user logs in.
Thank you for your support.
Best regards,
Alexandre Ventura
Message Edited by AlexandreV on 01-25-2008 04:56 AM

How do you silently install the network license to Circuit Design Suite

After a silent install of Circuit Design Suite you still have to manually tell it the network license details. Is there a silent install for this too?

There are a couple of reasons you might see this error:
1. Make sure when you are creating the network installer, you are pointing to the root of the CD, containing setup.exe.
2. There was an issue with the first release of the network installer that would cause this error. The issue was resolved with a maintenance release.
See this knowledge base article for more information.
You can download the latest version of the Volume License Manager from here
Garret
Senior Software Developer
National Instruments
Circuit Design Community and Blog
If someone helped you, let them know. Mark as solved or give a kudo.

Circuit Design Suite 10.1. Evaluation error. Evaluation period is expired?

Hi!
I'm a student from Portugal and recently (Monday, March 23rd 2009) I have downloaded the evaluation version for the Circuit Design Suite 10.1 that includes MultiSim 10.1...
Everything went perfect during the installation, but when I tried to run the actual application, an error box showed up saying "An unexpected licensing error has occurred. Contact National Instruments Technical Support at ni.com/support to resolve this issue."
I tried to open the application one more time, and this time, the evaluation option is disabled with a new message next to it: "Your evaluation for this product has expired."
Now, I went through the license file for MultiSim, and somewhere in the middle of it I could spot the following line, "INCREMENT Multisim_Edu_PKG nilm 10.0101 22-apr-2009", which I believe to be the expiring date of my evaluation...
Can you help me with this issue?
Best regards,
Antonio Rodrigues

Hi Antonio,
Thanks for
posting on the National Instruments Forum.
Can you
Repair your installation? Does it work? If it does not work you can uninstall
your Multisim (don't forget the Windows Registry; HKEY_CURRENT_USER\Software\National
Instruments, HKEY_LOCAL_MACHINE\Software\National Instruments Delete the Multisim
Key) the reinstall Multisim.
Moreover, if you downloaded the evaluation, make sure you have unzipped the
files in your local disk.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/

NI Circuit Design Suite 10 Core configuration

When I launch MultiSim 10 Student edition, instead of the yellow NI flash screen I periodically get a Windows box labelled "NI Circuit Design Suite 10 Core" that contains the message "Please wait while Windows configures NI Circuit Design Suite 10." This process takes a minute or so before the yellow flash screen finally appears to indicate that the program is loading.
Is there something incomplete about the installation, or is this an expected behavior?
Thanks,
Rick McCall

Thanks Nestor. I did try that. I have since discovered what appears to be the cause.
Apparently there are two files that are part of the NI Core named comutil.dll and se.exe. Unfortunately, these are also the names of two ubiquitous spyware programs "Comet Cursor," and "Look2Me." My spyware removal program has been regularly removing them and thus forcing the program to re-install these pieces of the core. I have marked them to be ignored and hope that this solves the problem.
All the best,
Rick

Error while initializing the travel form

Hi Guys,
In the ESS, when I try to display the travel, the system displays the following message "Error while initializing the travel form".
I've consulted the BASIS, and he said that Adobe is already installed in the machine.
Someone knows how can I fix this problem?
Thanks

Check the Variant "TRVFR".
Check whether the Name of the Travel request Form is maintained or not?
Vijay
Edited by: Vijay Mohan on Sep 29, 2008 3:18 PM

MSS - Error while initiating Travel Form

Hi All,
After applying travel request from ESS, request go to the Manager Self Service of his/her immediate boss.
In the universal worklist of MSS when manager clicks on the link of travel request - Error Comes as:
"Error while initiating travel form "
Basis and EP Guys are not able to identify the problem.
Kindly let me know if any configuration is required in ECC or any activities to be done in EP.
Very Thanks in Advance..
Edwin

Hi Edwin,
per default, the Forms of Travel Management use the PDF-Format. For the generation of these PDFs "Adobe Document Services" must be installed on a java server and published via SM59 to the respective HCM Backend. If ADS is not available, Travel Management will still try to use it, thus you get this error. So your options are:
1. Tell your Basis Guys they need to install and configure ADS on a java Server and make A connection in SM59 on the respective HCM Backend.
For documentation check here:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6?quicklink=index&overridelayout=true
OR
2. You can change the displayed Format from PDF to HMTL by doing the following:
- Go to Customizing Travel Management --> Travel Planning --> Expert View --> Define Enterprise-Wide Control Parameters
- Make a new entry and choose HTMLFORM_R_P for attribute and X for value. Save.
- Go to Customizing Travel Management --> Travel Expenses --> Travel Expenses Control --> Travel Expenses Control Expert View
- Set the Parameter of Other Settlement No. 24 (number four for the right matrix) from 0 TO 1, thus setting Adobe Forms inactive.
For Documentation check here:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/43/23fee3cad24e87e10000000a422035/frameset.htm
this should help you
regards, Lukas

Uninstall NI circuit design suit 10.1.1

hi...
i installed NI circuit design suit 10.1.1 education version...
it is not installed properly....then when i want to install again ...it is saying higher version of NI circuit design suit is installed
so what i did is, i removed the files in the program files and i un-installed in the control panel (add or remove programs)
....but even then my problem is not solving....
so please if anyone know how to uninstall so that i will installit again
my Operating system is windows XP...

The uninstaller has always been a turd and never deletes all reg entries and files it installs, this has been a mess since version 7. To this day, it acts the same way.......I've mentioned it many times throughout, but nothing ever gets done to fix it. Just manually delete the files.
Signature: Looking for a footprint, component, model? Might be here > http://ni.kittmaster.com

Where Can I Find Components And Footprints Not Included In The Circuit Design Suite Databases?

One of the most common questions asked by users of the Multisim and Ultiboard suite is about finding components. From time to time you may come across the need of a particular component or footprint (lanbdpattern) that is not included in the master databases. So where can you look for these components? There are multiple places to begin your search, both 3rd party and from NI that are free and readily accessible:
One of the long-standing free resources is the Kittmaster's Component Database which is maintained by Kittmaster (Chris) one of our proven active veterans of this board as well as a Beta Tester of the Circuit Design Suite. You will find a vast collection of already built parts in Multisim and Ultiboard formats that have been submitted by users like you that have register on kittmaster's database and that actively upload custom component creations. I encourage you to register and share.
NI has recently created the Circuit Design Community in response to requests from users around the world. The Circuit Design Community aims to provide an open resource for designers that need or would like to share Multisim components, Ultiboard footprints, sample design files and other documents that are of use for the design community. The basic difference between the Circuit Design Community and this Circuit Design Discussion Forum is that the Community is tailored for document and file sharing, whereas the Forum is designed with problem solving, tip sharing and general support questions in mind. Again, I encourage you not only to search, but also to share any components you may have created that are useful for other designers.
Most manufacturers that offer SPICE or PSPICE models in their websites would typically allow you to download them free of charge, in most cases accepting a license agreement. The first step is to identify who the manufacture of the part you are looking for is, as well as cross-reference manufacturers. Then search in their corresponding websites for the product folder or design resources section. If you find SPICE or PSPICE models you can easily import those when creating a new component, remember that Multisim is highly compatible with PSPICE models, and every new release adds more compatibility. If you cannot find the model, it does not hurts to call or email the manufacture and ask directly if they have such models, in many cases they are not advertised in the web.
Last, but not least, use your favourite internet search engine and see if anyone out there has posted or worked on a similar model.
Thank you for using the support resources and I hope that these options fulfill most of the component searches that you may need to do.
Message Edited by nestor on 04-14-2009 02:52 PM
Nestor
National Instruments

You can have a look at some established projects that are using similar tools - where do they put the application files etc.
There are things like XDG_CONFIG_HOME, XDG_DATA_HOME etc. http://standards.freedesktop.org/basedi … atest.html

Essbase 11.1.2.1 configuration error " Error while initializing registry."

I have installed Essabase 11.1.2.1 components successfully in linux(RHEL 5) and while configuring the shared services first time getting the error :Error while initializing registry. unable to navigate from registry wizard state"
In the configtool log I found the below exeptions and errors:
[2011-12-28T13:05:48.798-05:00] [EPMCFG] [TRACE] [EPMCFG-01857] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] Creating a new registry: DBtype is ORACLE
[2011-12-28T13:05:48.798-05:00] [EPMCFG] [TRACE] [EPMCFG-01858] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] JDBC URL: jdbc:oracle:thin:@devdwdb.newcorp.com:1531:DEVDW
[2011-12-28T13:05:48.803-05:00] [EPMCFG] [TRACE] [EPMCFG-01319] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating system component: component type = SYSTEM9
[2011-12-28T13:05:49.014-05:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = FOUNDATION_SERVICES_PRODUCT
[2011-12-28T13:05:49.025-05:00] [EPMCFG] [TRACE] [EPMCFG-01323] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating Registry database connection component: component type = DATABASE_CONN
[2011-12-28T13:05:49.040-05:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = SHARED_SERVICES_PRODUCT
[2011-12-28T13:05:49.129-05:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 16] [ecid: 0000JI5qMtcFO9EpJ44Eyf1EypdL000003,0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Error:[[
com.hyperion.hit.wizard.FailedButRetryPossibleException: Error while initializing registry.
     at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:394)
     at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:515)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.NullPointerException
     at com.hyperion.config.document.Storage.setLink(Storage.java:398)
     at com.hyperion.cis.config.ConfigRegistryUtils.createProductComponent(ConfigRegistryUtils.java:81)
     at com.hyperion.cis.config.ConfigRegistryUtils.initializeRegistry(ConfigRegistryUtils.java:419)
     at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:277)
Here I am wondering that I have installed and configure successfully in dev environment with the same DB privileges and folder permissions,as well same character set details and the same install files every thing is same as dev environment, but the same approach is failing in prod environment.
I am unable to figure out what exactly issue is,
Can any one please help me out in this regard.
Edited by: 900598 on Dec 29, 2011 11:48 PM

Hi John,
We are using the different schemas(ESHSRVC for dev and ESHSRVC4 for prod)and different user ids as well in the db server( devdwdb.newcorp.com:1531:DEVDW)
where the DEVDW is the sid for both schemas.
Here the HSS tables created in ESHSRVC and working fine for dev.
but in the new installation and config with the ESHSRVC4 schema the config is failing and throwing the error msg..
I am sure the new installation is not pointing to the old HSS populated schema(ESHSRVC) and I have given the connection details of ESHSRVC4(new schema) while config the shared services for new one.
I cross checked the both schema's have the same privileges and character sets.
but in the new config with new schema is unable to create the registry and throwing error.
I have uninstalled and deleted the entire folder and created new schema's and started the new install and config still getting same error.
.

EPM configuration ESSBASE Failed to navigate from RegistryWizardState:Error while initializing registry.

When I was in the configuration ESSBASE, ran into trouble.
Failed to navigate from RegistryWizardState:Error while initializing registry.
soft： EPM 11.1.2.3
OS： linux redhat6.1
Two planing server configuration
A server configuration essbase and install oracle relational database
Planning configuration is successful, but the first step in essbase Shared servers failed, the error is:Failed to navigate from RegistryWizardState:Error while initializing registry.
What should I do?
Please

If you are using Oracle database, Create a user(schema) with the below previliges
Roles:
DBA, Resource, Connect
privileges:
CREATE ANY SYNONYM,CREATE CLUSTER,CREATE INDEXTYPE,CREATE PROCEDURE,CREATE SEQUENCE,CREATE SESSION,CREATE TABLE,CREATE TRIGGER,CREATE TYPE,CREATE VIEW,DROP ANY SYNONYM
Thanks,
mady

Error while initializing the work area SYST

Hi Experts,
we did a kernel upgrade in NW 2004 from Kernel 640 to Kernel 700.
OS : UNIX DB: Oracle
At Os Level SAP and Oracle started.
when we try starting the SAP,
it shows the following error : error while initializing the work area SYST
Thanks in Aavance,
Satish T.

> Did you get the solution for this? if so, could you please share the same with me. I also got same error after installing the SAP. From OS level everything looks fine but getting the same error while trying to login from SAP GUI as you reported.
The answer is simple: Use the proper kernel
If this is a new installed system and you can't logon please post the logfile dev_w0 here.
Markus

Problem installing Circuit Design Suite - "Error while initializing resource loader"

Similar Messages

Maybe you are looking for