Problem Installing Client 9.2.0.1.0 W2K SP3
We are attempting to install the Oracle 9i Client Version 9.2.0.1.0 on a system running Windows 2000 Professional with Service Pack 3. When selecting either the Administrator or Runtime installation types, we get the following error message three times:
There was an error during loading library:
WindowsGeneralQueries
The Net Configuration Assistant is able to connect to a test server without issue, so as far as we can tell the PC is configured correctly. Any suggestions would be appreciated. Thanks.
What was the solution for this? Have the same problem.
Similar Messages
-
Problems installing hardware (VISION:W) on my DELL XP (SP3)
when i click on device properties, under Device Status i get this msg:
The drivers for this device are not installed. (Code 28)
To reinstall the drivers for this device, click Reinstall Driver.
and i have a reinstall button bellow.
when i click on the reinstall button i get this msg:
an error occourred during the installation of the device
A service section in this INF is invalled.
and in the device manager under Portable Device (tab) there is an exclamation mark on Creative ZEN VISION W.
if u need and further info please let me know
btw i never had this problem with my old acer laptop.
thanks for helpingi did a search,
i think i should uninstall the WMP and i already did, but i noticed that i cant delete the Creative ZEN VISION W from the Device Manager after i remove the WMP, so what i will do is re-install WMP then delete the Creative ZEN VISION W dri've then uninstall the WMP again and see what happens,
i hope it works, i think it will.
thanks -
Problem Installing Oracle Client 11g R2 64 bit on Windows 7 Enterprise 64
Hi,
I am having problems installing the Oracle Client 11g R2 64 bit installation on my Windows 7 64 bit Enterprise machine. The installer does all the checks successfully, it gets me to summary screen and I press finish to start the installation. It then opens the installation mask where it first says Checking whether Central Inventory is locked by another OUI session. After that it very briefly shows Central Inventory is not locked and then the window immediately dissapears with no other errors. I tried installing at my colleague's W7 Enterprise 64 machine and it behaves a little differently but with the same result. Basically on his machine it never even opens the Install mask, when pressing finish from the Summary it just disappears and never starts installation. I tried installing 11g R1 and that loads the first mask and when i press next it just dissapears. I basically need an oracle client 64 bit installation on my machine deperately. Please help. Thanks
AlexOne user above reported installing the 64 bit odbc drivers and then the 32 bit drivers. How did you do that? I'm a neophyte to this.
I'm trying to get a 32 bit ODBC oracle driver to work on a server 2008 R2 machine. I downloaded the 11gR2 x64 client from oracle. The install process makes no mention of 32bit vs 64bit installation. After running the instalation I can run the ODBC administrator and generate a DSN for oracle. When I run the 32 ODBC administrator there is no oracle driver available except the microsoft driver for oracle. When I select that it says that I need to install oracle.
I had at first tried to install 11g instant client. However that didn't work for the 2008 R2 machine. It complained about some registry error when I tried to run the ODBC install program. I need to get it to work for a customer asap. -
Problem installing SCCM client in remote untrusted forest
Hi,
My configuration is :
My network is in two parts : intranet and a DMZ. In the DMZ there is another forest and domain. There is no trust between the forest in the DMZ and the internal network. I configured the remote forest in SCCM with a user account that has Domain Admin acces
in the DMZ forest/domain.
The primary site server is located in the internal part of my network. SQL is installed on a remote server. Management point, distribution point, Fallback Status Point roles are installed on the primary site server. SMS Provider is installed on the primary
site server.
In the DMZ part, I have a management point, distribution point installed on one server.
The forest discovery works fine. I can query AD in the remote forest (DMZ).
I have a problem installing the SCCM client on computers located in the remote forest with client push or with the command line.
CCMSETUP.EXE /MP:DMZ site server /DP:DMZ site server /FSP: primary site server SMSSITECODE:SIT
In CCMSetup.log I can see that the client try to communicate with my DMZ site server but it reverts to the management point and distribution point located in the internal part of the network. The installation fails and will try in 10 minutes.
Do anyone has seen this problem before? Am I missing something? Could it be a configuration issue?
Could you help me whit this please?
Thanks in advance for your time!
JacquesDoes the client installation work when you install the client manually on the untrusted domain client? What does the CCM.log say on the site server?
Have you double checked the firewall ports for the client push installation? The ports needed for the client push to work are as follows (from the site server to the client):
SMB - TCP 445
RPC Endpoint Mapper - TCP 135 / UDP 135
RPC Dynamic Ports
And to Management Point:
HTTP - TCP 80 (When using HTTP)
HTTPS - TCP 443 (When using HTTPS)
Also a quote from
TechNet: "In addition to the ports listed in the following table, client push installation also uses Internet Control Message Protocol (ICMP) echo request messages from the site server to the client computer to confirm whether the client
computer is available on the network. ICMP is sometimes referred to as TCP/IP ping commands. ICMP does not have a UDP or TCP protocol number, and so it is not listed in the following table. However, any intervening network devices, such as firewalls, must
permit ICMP traffic for client push installation to succeed." -
Problems installing Adobe Air and BBC iPlayer Desktop
Problems installing Adobe Air and BBC iPlayer Desktop
I'm running Windows 7 32 bit on an ASUS netbook with 2mb ram. I installed both Air 3.7 and BBC iPlayer Desktop using Google Chrome. I downloaded 3 BBC programmes. Two ran fine but the third wouldn't start and I kept getting a message to try again later. I deleted this programme and downloaded it again, with the same result.
So I uninstalled both Air and the BBC iPlayer Desktop, the Air exe file and the two folders at the following locations:
C:\Users\USERNAME\AppData\Roaming\Adobe\AIR\ and
C:\Users\USERNAME\AppData\Roaming\BBCiPlayerDesktop.xxx
Since doing this each time I try to install Air either on its own or with the BBC iPlayer software I get the message part way through installation:
"Sorry, an error has occurred.
An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
I have run the Microsoft Fix it programme and still get the same result.
I have tried everything on your Trouble Shooting page apart from the bit about the elevated command prompt, but as I'm the sole user and administrator, that seems unnecessary.
I have closed Chrome and tried installation using Windows Explorer but with the same result.
I have tried all the above with Microsoft Security Essentials running and disabled. And I have tried the same with Astrill on and off.
I have had a response from the BBC with much the same advice as appears on your trouble shooting page.
Here is the Air installation log, followed by the MSI log.
[2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:53:46] Commandline is:
[2013-04-25:06:53:46] No installed runtime detected
[2013-04-25:06:53:57] Relaunching with elevation
[2013-04-25:06:53:57] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
[2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
[2013-04-25:06:54:02] No installed runtime detected
[2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp
\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:54:10] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local
\temp\air79c1.tmp\setup.msi
[2013-04-25:06:54:10] Rollback complete
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Runtime Installer end with exit code 7
[2013-04-25:06:54:20] Runtime Installer end with exit code 7
[2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:55:38] Commandline is:
[2013-04-25:06:55:38] No installed runtime detected
[2013-04-25:06:55:45] Relaunching with elevation
[2013-04-25:06:55:45] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
[2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
[2013-04-25:06:55:48] No installed runtime detected
[2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp
\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:55:55] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local
\temp\air30fe.tmp\setup.msi
[2013-04-25:06:55:55] Rollback complete
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Runtime Installer end with exit code 7
[2013-04-25:06:55:59] Runtime Installer end with exit code 7
[2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:05:12] Commandline is:
[2013-04-25:07:05:12] No installed runtime detected
[2013-04-25:07:05:18] Relaunching with elevation
[2013-04-25:07:05:18] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
[2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
[2013-04-25:07:05:24] No installed runtime detected
[2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp
\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:05:29] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local
\temp\air953.tmp\setup.msi
[2013-04-25:07:05:29] Rollback complete
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Runtime Installer end with exit code 7
[2013-04-25:07:05:31] Runtime Installer end with exit code 7
[2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:07:06:12] Commandline is:
[2013-04-25:07:06:12] No installed runtime detected
[2013-04-25:07:06:21] Relaunching with elevation
[2013-04-25:07:06:22] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
[2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
[2013-04-25:07:06:32] No installed runtime detected
[2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp
\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:06:37] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local
\temp\aire916.tmp\setup.msi
[2013-04-25:07:06:37] Rollback complete
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Runtime Installer end with exit code 7
[2013-04-25:07:06:40] Runtime Installer end with exit code 7
[2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on
Windows Vista x86
[2013-04-25:07:26:15] Commandline is:
[2013-04-25:07:26:15] No installed runtime detected
[2013-04-25:07:26:28] Relaunching with elevation
[2013-04-25:07:26:28] Launching subprocess with commandline c:\users
\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
[2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on
Windows 7 x86
[2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
[2013-04-25:07:26:37] No installed runtime detected
[2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version
3.7.0.1530
[2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp
\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:26:48] Error occurred during msi install operation; beginning
rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
text="1603" errorID=0]
[2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local
\temp\air3063.tmp\setup.msi
[2013-04-25:07:26:48] Rollback complete
[2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Runtime Installer end with exit code 7
[2013-04-25:07:46:09] Runtime Installer end with exit code 7
=== Verbose logging started: 25/04/2013 08:34:51 Build type: SHIP UNICODE
5.00.7601.00 Calling process: C:\windows\System32\msiexec.exe ===
MSI (c) (68:6C) [08:34:51:397]: Font created. Charset: Req=0, Ret=0, Font:
Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (68:6C) [08:34:51:397]: Font created. Charset: Req=0, Ret=0, Font:
Req=MS Shell Dlg, Ret=MS Shell Dlg
MSI (c) (68:70) [08:34:51:469]: Resetting cached policy values
MSI (c) (68:70) [08:34:51:469]: Machine policy value 'Debug' is 0
MSI (c) (68:70) [08:34:51:469]: ******* RunEngine:
******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
******* Action:
******* CommandLine: **********
MSI (c) (68:70) [08:34:51:473]: Machine policy value 'DisableUserInstalls' is 0
MSI (c) (68:70) [08:34:51:653]: SOFTWARE RESTRICTION POLICY: Verifying
package --> 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi' against
software restriction policy
MSI (c) (68:70) [08:34:51:654]: SOFTWARE RESTRICTION POLICY: C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi has a digital signature
MSI (c) (68:70) [08:34:51:966]: SOFTWARE RESTRICTION POLICY: C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi is permitted to run at the
'unrestricted' authorization level.
MSI (c) (68:70) [08:34:51:986]: Cloaking enabled.
MSI (c) (68:70) [08:34:51:986]: Attempting to enable all disabled privileges
before calling Install on Server
MSI (c) (68:70) [08:34:52:001]: End dialog not enabled
MSI (c) (68:70) [08:34:52:001]: Original package ==> C:\Users\Steve
\Downloads\MicrosoftFixit50381.msi
MSI (c) (68:70) [08:34:52:001]: Package we're running from ==> C:\Users
\Steve\Downloads\MicrosoftFixit50381.msi
MSI (c) (68:70) [08:34:52:010]: APPCOMPAT: Compatibility mode property
overrides found.
MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: looking for appcompat database
entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: no matching ProductCode found
in database.
MSI (c) (68:70) [08:34:52:041]: MSCOREE not loaded loading copy from
system32
MSI (c) (68:70) [08:34:52:063]: Machine policy value 'TransformsSecure' is 0
MSI (c) (68:70) [08:34:52:063]: User policy value 'TransformsAtSource' is 0
MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: File 3: -2147287038
MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (c) (68:70) [08:34:52:065]: Machine policy value 'DisablePatch' is 0
MSI (c) (68:70) [08:34:52:065]: Machine policy value 'AllowLockdownPatch' is
0
MSI (c) (68:70) [08:34:52:066]: Machine policy value 'DisableMsi' is 0
MSI (c) (68:70) [08:34:52:066]: Machine policy value 'AlwaysInstallElevated' is
0
MSI (c) (68:70) [08:34:52:066]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (68:70) [08:34:52:066]: Running product '{55D13F49-FCB8-4892-
8266-05D373FCAA61}' with user privileges: It's not assigned.
MSI (c) (68:70) [08:34:52:067]: Machine policy value 'DisableLUAPatching' is 0
MSI (c) (68:70) [08:34:52:067]: Machine policy value
'DisableFlyWeightPatching' is 0
MSI (c) (68:70) [08:34:52:068]: Enabling baseline caching for this transaction
since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor
update patch is active
MSI (c) (68:70) [08:34:52:071]: APPCOMPAT: looking for appcompat database
entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
MSI (c) (68:70) [08:34:52:072]: APPCOMPAT: no matching ProductCode found
in database.
MSI (c) (68:70) [08:34:52:072]: Transforms are not secure.
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding MsiLogFileLocation
property. Its value is 'C:\Users\Steve\AppData\Local\Temp\MSIa5745.LOG'.
MSI (c) (68:70) [08:34:52:073]: Command Line: CURRENTDIRECTORY=C:\Users
\Steve\Downloads CLIENTUILEVEL=0 CLIENTPROCESSID=9576
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding PackageCode
property. Its value is '{1C7C3009-013E-4A16-9A0F-0000FB80A613}'.
MSI (c) (68:70) [08:34:52:073]: Product Code passed to Engine.Initialize:
MSI (c) (68:70) [08:34:52:073]: Product Code from property table before
transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
MSI (c) (68:70) [08:34:52:073]: Product Code from property table after
transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
MSI (c) (68:70) [08:34:52:073]: Product not registered: beginning first-time
install
MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding ProductState
property. Its value is '-1'.
MSI (c) (68:70) [08:34:52:073]: Entering
CMsiConfigurationManager::SetLastUsedSource.
MSI (c) (68:70) [08:34:52:073]: User policy value 'SearchOrder' is 'nmu'
MSI (c) (68:70) [08:34:52:073]: Adding new sources is allowed.
MSI (c) (68:70) [08:34:52:074]: PROPERTY CHANGE: Adding
PackagecodeChanging property. Its value is '1'.
MSI (c) (68:70) [08:34:52:074]: Package name extracted from package path:
'MicrosoftFixit50381.msi'
MSI (c) (68:70) [08:34:52:075]: Package to be registered:
'MicrosoftFixit50381.msi'
MSI (c) (68:70) [08:34:52:075]: Note: 1: 2262 2: Error 3: -2147287038
MSI (c) (68:70) [08:34:52:078]: Note: 1: 2262 2: AdminProperties 3: -
2147287038
MSI (c) (68:70) [08:34:52:078]: Machine policy value 'AlwaysInstallElevated' is
0
MSI (c) (68:70) [08:34:52:078]: User policy value 'AlwaysInstallElevated' is 0
MSI (c) (68:70) [08:34:52:079]: Running product '{55D13F49-FCB8-4892-
8266-05D373FCAA61}' with user privileges: It's not assigned.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
CURRENTDIRECTORY property. Its value is 'C:\Users\Steve\Downloads'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTUILEVEL
property. Its value is '0'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTPROCESSID
property. Its value is '9576'.
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
MsiSystemRebootPending property. Its value is '1'.
MSI (c) (68:70) [08:34:52:079]: TRANSFORMS property is now:
MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding VersionDatabase
property. Its value is '200'.
MSI (c) (68:70) [08:34:52:081]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming
MSI (c) (68:70) [08:34:52:082]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Favorites
MSI (c) (68:70) [08:34:52:084]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (c) (68:70) [08:34:52:085]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Documents
MSI (c) (68:70) [08:34:52:086]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (c) (68:70) [08:34:52:088]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Recent
MSI (c) (68:70) [08:34:52:089]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\SendTo
MSI (c) (68:70) [08:34:52:091]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Templates
MSI (c) (68:70) [08:34:52:092]: SHELL32::SHGetFolderPath returned: C:
\ProgramData
MSI (c) (68:70) [08:34:52:093]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Local
MSI (c) (68:70) [08:34:52:094]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Pictures
MSI (c) (68:70) [08:34:52:097]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
\Administrative Tools
MSI (c) (68:70) [08:34:52:098]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
\Startup
MSI (c) (68:70) [08:34:52:099]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (c) (68:70) [08:34:52:101]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (c) (68:70) [08:34:52:102]: SHELL32::SHGetFolderPath returned: C:
\Users\Steve\Desktop
MSI (c) (68:70) [08:34:52:104]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (c) (68:70) [08:34:52:107]: SHELL32::SHGetFolderPath returned: C:
\ProgramData\Microsoft\Windows\Start Menu
MSI (c) (68:70) [08:34:52:109]: SHELL32::SHGetFolderPath returned: C:
\Users\Public\Desktop
MSI (c) (68:70) [08:34:52:113]: SHELL32::SHGetFolderPath returned: C:
\windows\Fonts
MSI (c) (68:70) [08:34:52:115]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans
Serif 4: 0 5: 16
MSI (c) (68:70) [08:34:52:147]: MSI_LUA: Setting AdminUser property to 1
because this is the client or the user has already permitted elevation
MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding AdminUser
property. Its value is '1'.
MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding Privileged
property. Its value is '1'.
MSI (c) (68:70) [08:34:52:148]: Note: 1: 1402 2: HKEY_CURRENT_USER
\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (68:70) [08:34:52:148]: PROPERTY CHANGE: Adding USERNAME
property. Its value is 'Steve'.
MSI (c) (68:70) [08:34:52:149]: Note: 1: 1402 2: HKEY_CURRENT_USER
\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding DATABASE
property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding OriginalDatabase
property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
MSI (c) (68:70) [08:34:52:149]: Machine policy value 'MsiDisableEmbeddedUI' is
0
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SourceDir
property. Its value is 'C:\Users\Steve\Downloads\'.
MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SOURCEDIR
property. Its value is 'C:\Users\Steve\Downloads\'.
MSI (c) (68:6C) [08:34:52:153]: PROPERTY CHANGE: Adding VersionHandler
property. Its value is '5.00'.
=== Logging started: 25/04/2013 08:34:52 ===
MSI (c) (68:70) [08:34:52:171]: Note: 1: 2262 2: PatchPackage 3: -
2147287038
MSI (c) (68:70) [08:34:52:172]: Machine policy value 'DisableRollback' is 0
MSI (c) (68:70) [08:34:52:172]: User policy value 'DisableRollback' is 0
MSI (c) (68:70) [08:34:52:172]: PROPERTY CHANGE: Adding UILevel property.
Its value is '5'.
MSI (c) (68:70) [08:34:52:172]: Note: 1: 2262 2: Font 3: -2147287038
MSI (c) (68:70) [08:34:52:174]: PROPERTY CHANGE: Adding ACTION property.
Its value is 'INSTALL'.
MSI (c) (68:70) [08:34:52:174]: Doing action: INSTALL
Action 08:34:52: INSTALL.
Action start 08:34:52: INSTALL.
MSI (c) (68:70) [08:34:52:176]: UI Sequence table 'InstallUISequence' is
present and populated.
MSI (c) (68:70) [08:34:52:176]: Running UISequence
MSI (c) (68:70) [08:34:52:176]: PROPERTY CHANGE: Adding EXECUTEACTION
property. Its value is 'INSTALL'.
MSI (c) (68:70) [08:34:52:176]: Doing action: Milestone_ERRCA_UIAN726
Action 08:34:52: Milestone_ERRCA_UIAN726.
Action start 08:34:52: Milestone_ERRCA_UIAN726.
MSI (c) (68:70) [08:34:52:177]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_ERRCA_UIAN726'
MSI (c) (68:70) [08:34:52:178]: PROPERTY CHANGE: Adding Milestone
property. Its value is 'ERRCA_UIANDADVERTISED'.
Action ended 08:34:52: Milestone_ERRCA_UIAN726. Return value 1.
MSI (c) (68:70) [08:34:52:178]: Skipping action: ERRCA_UIANDADVERTISED
(condition is false)
MSI (c) (68:70) [08:34:52:178]: Doing action: Milestone_AppSearch122
Action 08:34:52: Milestone_AppSearch122.
Action start 08:34:52: Milestone_AppSearch122.
MSI (c) (68:70) [08:34:52:180]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_AppSearch122'
MSI (c) (68:70) [08:34:52:180]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'ERRCA_UIANDADVERTISED'. Its new value:
'AppSearch'.
Action ended 08:34:52: Milestone_AppSearch122. Return value 1.
MSI (c) (68:70) [08:34:52:181]: Doing action: AppSearch
Action 08:34:52: AppSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:52: AppSearch.
MSI (c) (68:70) [08:34:52:182]: Note: 1: 2262 2: AppSearch 3: -2147287038
Action ended 08:34:52: AppSearch. Return value 1.
MSI (c) (68:70) [08:34:52:183]: Doing action: FindRelatedProducts
Action 08:34:52: FindRelatedProducts. {\FinalUIFont}
[PROGRESS_RESTORE_TXT]
Action start 08:34:52: FindRelatedProducts.
Action ended 08:34:52: FindRelatedProducts. Return value 1.
MSI (c) (68:70) [08:34:52:185]: Doing action: Milestone_EulaForm201
Action 08:34:52: Milestone_EulaForm201.
Action start 08:34:52: Milestone_EulaForm201.
MSI (c) (68:70) [08:34:52:186]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_EulaForm201'
MSI (c) (68:70) [08:34:52:187]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'AppSearch'. Its new value: 'EulaForm'.
Action ended 08:34:52: Milestone_EulaForm201. Return value 1.
MSI (c) (68:70) [08:34:52:187]: Doing action: EulaForm
Action 08:34:52: EulaForm.
Action start 08:34:52: EulaForm.
MSI (c) (68:70) [08:34:52:193]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'EulaForm'
MSI (c) (68:6C) [08:34:52:205]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif13.0_0_0 textstyle, the system created a 'MS
Sans Serif' font, in 0 character set, of 13 pixels height.
MSI (c) (68:6C) [08:34:52:221]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400
textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13
pixels height.
MSI (c) (68:6C) [08:34:52:225]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For VSI_MS_Sans_Serif16.0_1_0 textstyle, the system created a 'MS
Sans Serif' font, in 0 character set, of 20 pixels height.
MSI (c) (68:6C) [08:34:52:301]: Note: 1: 2262 2: CheckBox 3: -2147287038
Action 08:34:52: EulaForm. Dialog created
MSI (c) (68:10) [08:34:52:312]: Note: 1: 2731 2: 0
MSI (c) (68:6C) [08:34:55:670]: PROPERTY CHANGE: Adding EulaForm_Property
property. Its value is '1'.
Action ended 08:34:56: EulaForm. Return value 1.
MSI (c) (68:70) [08:34:56:881]: Doing action: EULAACCEPTED_ACTION
Action 08:34:56: EULAACCEPTED_ACTION.
Action start 08:34:56: EULAACCEPTED_ACTION.
MSI (c) (68:70) [08:34:56:883]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'EULAACCEPTED_ACTION'
MSI (c) (68:70) [08:34:56:883]: PROPERTY CHANGE: Adding EULAACCEPTED
property. Its value is '1'.
Action ended 08:34:56: EULAACCEPTED_ACTION. Return value 1.
MSI (c) (68:70) [08:34:56:884]: Doing action: Milestone_LaunchCond24
Action 08:34:56: Milestone_LaunchCond24.
Action start 08:34:56: Milestone_LaunchCond24.
MSI (c) (68:70) [08:34:56:886]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_LaunchCond24'
MSI (c) (68:70) [08:34:56:887]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'EulaForm'. Its new value: 'LaunchConditions'.
Action ended 08:34:56: Milestone_LaunchCond24. Return value 1.
MSI (c) (68:70) [08:34:56:889]: Doing action: LaunchConditions
Action 08:34:56: LaunchConditions. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: LaunchConditions.
Action ended 08:34:56: LaunchConditions. Return value 1.
MSI (c) (68:70) [08:34:56:891]: Doing action: CCPSearch
Action 08:34:56: CCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CCPSearch.
MSI (c) (68:70) [08:34:56:892]: Note: 1: 2262 2: CCPSearch 3: -2147287038
Action ended 08:34:56: CCPSearch. Return value 1.
MSI (c) (68:70) [08:34:56:892]: Doing action: RMCCPSearch
Action 08:34:56: RMCCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: RMCCPSearch.
MSI (c) (68:70) [08:34:56:893]: Note: 1: 2262 2: CCPSearch 3: -2147287038
Action ended 08:34:56: RMCCPSearch. Return value 0.
MSI (c) (68:70) [08:34:56:894]: Doing action: ValidateProductID
Action 08:34:56: ValidateProductID. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: ValidateProductID.
Action ended 08:34:56: ValidateProductID. Return value 1.
MSI (c) (68:70) [08:34:56:895]: Doing action: Milestone_DIRCA_TARG947
Action 08:34:56: Milestone_DIRCA_TARG947.
Action start 08:34:56: Milestone_DIRCA_TARG947.
MSI (c) (68:70) [08:34:56:897]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'Milestone_DIRCA_TARG947'
MSI (c) (68:70) [08:34:56:897]: PROPERTY CHANGE: Modifying Milestone
property. Its current value is 'LaunchConditions'. Its new value:
'DIRCA_TARGETDIR'.
Action ended 08:34:56: Milestone_DIRCA_TARG947. Return value 1.
MSI (c) (68:70) [08:34:56:897]: Doing action: DIRCA_TARGETDIR
Action 08:34:56: DIRCA_TARGETDIR. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: DIRCA_TARGETDIR.
MSI (c) (68:70) [08:34:56:899]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'DIRCA_TARGETDIR'
MSI (c) (68:70) [08:34:56:900]: PROPERTY CHANGE: Adding TARGETDIR
property. Its value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
Action ended 08:34:56: DIRCA_TARGETDIR. Return value 1.
MSI (c) (68:70) [08:34:56:900]: Doing action: CostInitialize
Action 08:34:56: CostInitialize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CostInitialize.
MSI (c) (68:70) [08:34:56:901]: Machine policy value 'MaxPatchCacheSize' is
10
MSI (c) (68:70) [08:34:56:901]: Baseline: Sorting baselines for {55D13F49-
FCB8-4892-8266-05D373FCAA61}.
MSI (c) (68:70) [08:34:56:901]: Baseline: New baseline 2.1.3 from transaction.
MSI (c) (68:70) [08:34:56:902]: Baseline: Sorted order Native: Order 0.
MSI (c) (68:70) [08:34:56:902]: Baseline Data Table:
MSI (c) (68:70) [08:34:56:902]: ProductCode: {55D13F49-FCB8-4892-8266-
05D373FCAA61} Version: 2.1.3 Attributes: 0 PatchId: Native BaselineId: -
2147483648 Order: 0
MSI (c) (68:70) [08:34:56:902]: Baseline File Table:
MSI (c) (68:70) [08:34:56:912]: PROPERTY CHANGE: Adding ROOTDRIVE
property. Its value is 'D:\'.
MSI (c) (68:70) [08:34:56:913]: PROPERTY CHANGE: Adding CostingComplete
property. Its value is '0'.
Action ended 08:34:56: CostInitialize. Return value 1.
MSI (c) (68:70) [08:34:56:914]: Doing action: FileCost
Action 08:34:56: FileCost. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: FileCost.
MSI (c) (68:70) [08:34:56:915]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: RemoveFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: MoveFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: Shortcut 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Class 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: TypeLib 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: IniFile 3: -2147287038
MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: ReserveCost 3: -2147287038
Action ended 08:34:56: FileCost. Return value 1.
MSI (c) (68:70) [08:34:56:917]: Doing action: IsolateComponents
Action 08:34:56: IsolateComponents. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: IsolateComponents.
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: BindImage 3: -2147287038
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: IsolatedComponent 3: -
2147287038
MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: Patch 3: -2147287038
Action ended 08:34:56: IsolateComponents. Return value 1.
MSI (c) (68:70) [08:34:56:920]: Skipping action: ResumeForm (condition is
false)
MSI (c) (68:70) [08:34:56:920]: Skipping action: MaintenanceForm (condition
is false)
MSI (c) (68:70) [08:34:56:920]: Doing action: CostFinalize
Action 08:34:56: CostFinalize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
Action start 08:34:56: CostFinalize.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding OutOfDiskSpace
property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
OutOfNoRbDiskSpace property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceAvailable property. Its value is '0'.
MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceRequired property. Its value is '0'.
MSI (c) (68:70) [08:34:56:921]: PROPERTY CHANGE: Adding
PrimaryVolumeSpaceRemaining property. Its value is '0'.
MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Condition 3: -2147287038
MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Modifying TARGETDIR
property. Its current value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
Its new value: 'C:\Program Files\Microsoft\Microsoft Fix it 50381\'.
MSI (c) (68:70) [08:34:56:923]: Target path resolution complete. Dumping
Directory table...
MSI (c) (68:70) [08:34:56:923]: Note: target paths subject to change (via
custom actions or browsing)
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: TARGETDIR , Object: C:
\Program Files\Microsoft\Microsoft Fix it 50381\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: WindowsFolder , Object: C:
\windows\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: ProgramMenuFolder ,
Object: C:\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
\Programs\
MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: DesktopFolder , Object: C:
\Users\Steve\Desktop\
MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Adding INSTALLLEVEL
property. Its value is '1'.
MSI (c) (68:70) [08:34:56:923]: Note: 1: 2262 2: IsolatedComponent 3: -
2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: BindImage 3: -2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: Patch 3: -2147287038
MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: RemoveFile 3: -2147287038
Action ended 08:34:56: CostFinalize. Return value 1.
MSI (c) (68:70) [08:34:56:925]: Doing action: ProgressForm
Action 08:34:56: ProgressForm.
Action start 08:34:56: ProgressForm.
MSI (c) (68:70) [08:34:56:926]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT
`Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
`CustomAction` WHERE `Action` = 'ProgressForm'
MSI (c) (68:6C) [08:34:56:938]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line1 on dialog ProgressForm extends beyond the
boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, Line1, to the right
MSI (c) (68:6C) [08:34:56:941]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control Line2 on dialog ProgressForm extends beyond the
boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, Line2, to the right
MSI (c) (68:6C) [08:34:56:948]: Note: 1: 2262 2: Error 3: -2147287038
DEBUG: Error 2826: Control BannerBmp on dialog ProgressForm extends beyond
the boundaries of the dialog to the right by 3 pixels
The installer has encountered an unexpected error installing this package. This
may indicate a problem with this package. The error code is 2826. The
arguments are: ProgressForm, BannerBmp, to the right
Action 08:34:56: ProgressForm. Dialog created
Action ended 08:34:57: ProgressForm. Return value 1.
MSI (c) (68:70) [08:34:57:011]: Doing action: ExecuteAction
Action 08:34:57: ExecuteAction. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
MSI (c) (68:6C) [08:34:57:012]: Note: 1: 2262 2: Error 3: -2147287038
Info 2898.For FinalUIFont textstyle, the system created a 'Arial' font, in 0
character set, of 15 pixels height.
Action start 08:34:57: ExecuteAction.
MSI (c) (68:70) [08:34:57:035]: PROPERTY CHANGE: Adding SECONDSEQUENCE
property. Its value is '1'.
MSI (c) (68:70) [08:34:57:043]: Grabbed execution mutex.
MSI (c) (68:70) [08:34:57:043]: Incrementing counter to disable shutdown.
Counter after increment: 0
MSI (c) (68:70) [08:34:57:045]: Switching to server: TARGETDIR="C:\Program
Files\Microsoft\Microsoft Fix it 50381\" EULAACCEPTED="1"
CURRENTDIRECTORY="C:\Users\Steve\Downloads" CLIENTUILEVEL="0"
CLIENTPROCESSID="9576" USERNAME="Steve" SOURCEDIR="C:\Users\Steve
\Downloads\" ACTION="INSTALL" EXECUTEACTION="INSTALL" ROOTDRIVE="D:\"
INSTALLLEVEL="1" SECONDSEQUENCE="1" ADDLOCAL=DefaultFeature
MSI (s) (C8:D4) [08:34:57:086]: Running installation inside multi-package
transaction C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
MSI (s) (C8:D4) [08:34:57:086]: Grabbed execution mutex.
MSI (s) (C8:BC) [08:34:57:092]: Resetting cached policy values
MSI (s) (C8:BC) [08:34:57:092]: Machine policy value 'Debug' is 0
MSI (s) (C8:BC) [08:34:57:092]: ******* RunEngine:
******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
******* Action: INSTALL
******* CommandLine: **********
MSI (s) (C8:BC) [08:34:57:096]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (C8:BC) [08:34:57:097]: Setting cached product context: User non-
assigned for product: 48945AC3B41AEF24F91FE79A10157D52
MSI (s) (C8:BC) [08:34:57:097]: Using cached product context: User non-
assigned for product: 48945AC3B41AEF24F91FE79A10157D52
MSI (s) (C8:BC) [08:34:57:099]: Setting cached product context: User non-
assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
MSI (s) (C8:BC) [08:34:57:099]: Using cached product context: User non-
assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
MSI (s) (C8:BC) [08:34:57:101]: Setting cached product context: User non-
assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
MSI (s) (C8:BC) [08:34:57:101]: Using cached product context: User non-
assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
MSI (s) (C8:BC) [08:34:57:103]: Setting cached product context: User non-
assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
MSI (s) (C8:BC) [08:34:57:103]: Using cached product context: User non-
assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
MSI (s) (C8:BC) [08:34:57:104]: Setting cached product context: User non-
assigned for product: E2EE924EC67B3554B8404B55780FF01D
MSI (s) (C8:BC) [08:34:57:104]: Using cached product context: User non-
assigned for product: E2EE924EC67B3554B8404B55780FF01D
MSI (s) (C8:BC) [08:34:57:106]: Setting cached product context: machine
assigned for product: 00002109001001400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:106]: Using cached product context: machine
assigned for product: 00002109001001400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:107]: Setting cached product context: machine
assigned for product: 00002109001031400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:108]: Using cached product context: machine
assigned for product: 00002109001031400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:110]: Setting cached product context: machine
assigned for product: 00002109001070400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:110]: Using cached product context: machine
assigned for product: 00002109001070400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:111]: Setting cached product context: machine
assigned for product: 000021090010C0400000000000F01FEC
MSI (s) (C8:BC) [08:34:57:111]: Using cached product context: machineHi Chris,
The AIR installation log is in my original post - about 12 paras down but here is is:
[2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:53:46] Commandline is:
[2013-04-25:06:53:46] No installed runtime detected
[2013-04-25:06:53:57] Relaunching with elevation
[2013-04-25:06:53:57] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
[2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
[2013-04-25:06:54:02] No installed runtime detected
[2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:54:10] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi
[2013-04-25:06:54:10] Rollback complete
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:54:10] Runtime Installer end with exit code 7
[2013-04-25:06:54:20] Runtime Installer end with exit code 7
[2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:55:38] Commandline is:
[2013-04-25:06:55:38] No installed runtime detected
[2013-04-25:06:55:45] Relaunching with elevation
[2013-04-25:06:55:45] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
[2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
[2013-04-25:06:55:48] No installed runtime detected
[2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:06:55:55] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi
[2013-04-25:06:55:55] Rollback complete
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:06:55:55] Runtime Installer end with exit code 7
[2013-04-25:06:55:59] Runtime Installer end with exit code 7
[2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:05:12] Commandline is:
[2013-04-25:07:05:12] No installed runtime detected
[2013-04-25:07:05:18] Relaunching with elevation
[2013-04-25:07:05:18] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
[2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
[2013-04-25:07:05:24] No installed runtime detected
[2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:05:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local\temp\air953.tmp\setup.msi
[2013-04-25:07:05:29] Rollback complete
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:05:29] Runtime Installer end with exit code 7
[2013-04-25:07:05:31] Runtime Installer end with exit code 7
[2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:07:06:12] Commandline is:
[2013-04-25:07:06:12] No installed runtime detected
[2013-04-25:07:06:21] Relaunching with elevation
[2013-04-25:07:06:22] Launching subprocess with commandline c:\users\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
[2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
[2013-04-25:07:06:32] No installed runtime detected
[2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi
[2013-04-25:07:06:37] Rollback complete
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:06:37] Runtime Installer end with exit code 7
[2013-04-25:07:06:40] Runtime Installer end with exit code 7
[2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
[2013-04-25:07:26:15] Commandline is:
[2013-04-25:07:26:15] No installed runtime detected
[2013-04-25:07:26:28] Relaunching with elevation
[2013-04-25:07:26:28] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
[2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
[2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
[2013-04-25:07:26:37] No installed runtime detected
[2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version 3.7.0.1530
[2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-04-25:07:26:48] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi
[2013-04-25:07:26:48] Rollback complete
[2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2013-04-25:07:26:48] Runtime Installer end with exit code 7
[2013-04-25:07:46:09] Runtime Installer end with exit code 7 -
Issue installing Client 9.2.0.1
Oracle rookie here having an issue installing Client 9.2.0.1....
I've installed the client software on a few machines without any issue. Now, I am installing it on the passive node of a cluster (cluster is running SQL Server 2000) and there is a problem. The install was successful once, until I noticed it installed under D:\oracle\ora92. I needed to install it on C, because that's where I installed it on the active node. However, when I run the installer (C:\9.2.0.1 Client\autorun\autorun.exe), it does not allow me to change the path or the name. If I change the Path to be be C:\oracle\ora92, the name (OraName92, in this case) goes away. If I retype OraName92 in the name box, the path goes back to D:\oracle\ora92.
I tried altering some ini files and that didn't work. I searched the registry and there are tons of references to the old install paths, but even changing some registry settings (specifically, HKLM\Software\Oracle\ORACLE_HOME and ORACLE_HOME_NAME) did not work. I didn't touch any other keys, but I did back up the registry.
Anyone have any thoughts on how I can get this installed on C? Thanks...
PeterJust for giggles, I tried altering the following registry key:
HKLM\Software\Oracle\ALL_HOMES\ID0\Path
The value used to be D:\oracle\ora92, and I changed it to C:\oracle\ora92. When I start the installer program, it picks it up as the value for OraHome92. I have nothing to lose by trying this, but my only question would be, will the installer overwrite the existing keys in the registry? I'm hoping that's what it will do, because I don't want any stray references to D:\oracle\ora92 lying around.
If anyone knows anything about this, please let me know. Thanks for all your help!
Peter -
Problems installing or running Adobe Flash Player for safari
problems installing or running Adobe® Flash® Player for safari when trying to install Adobe Flash Player.pkg it asks to quit Dash Board client then brings up Exclamation mark up and quits install ??????
Adobe Flash is pretty much a 32-bit application. You may be able to fix the problem by going into your Applications folder, and right-clicking on Safari. There is a check box that will allow you to run Safari in 32-bit mode. Try that and see if Flash works in Safari.
I have retired my iMac, and have an HP now, but a friend helped me with the same problem when I upgraded to Snow Leopard. My PC seems to have just one 64-bit browser, that being Internet Explorer. I am using IE9 Beta in 64-bit, and the Beta for Flash "Square" in 64-bit seems to work fine. See link below:
http://labs.adobe.com/downloads/flashplayer10_square.html
Jim -
Problems installing ARD 2.2 on OS10.4.3
I'm having a problem installed ARD on my eMac running 10.4.3. It installs fine and adds itself to the applications folder but when I go to open it, it just keeps saying it has to install necessary software and tries to install the client software. Then it closes remote desktop. If I go to open ARD again it goes through the same cycle, this is after typing in the serial number. Any suggestions? I've repaired the permissions and uninstalled/reinstalled several times. Thanks for the help!
You're profile says you're running mac os x 10.3.9 and you state you're running 10.4.3. Make sure you've made all of the updates possible on your computer. If you haven't, uninstall ARD 2.2, update your computer, re-boot and reinstall ARD 2.2
Just a suggestion. Good luck.
Mac Mini Mac OS X (10.4)
Mac Mini Mac OS X (10.4) -
Problems with client site assignment
Hello,
previously I did not have problems with clients on my test computers, both have WinXP SP3. I am testing migration scenarios. One computer is virtual, one is real computer. After successful migration to Win7, I decided to make another test and changed state
of computers back to with WinXP installed, rejoined to domain, removed from SCCM, discovered again. And I pushed agent installation. Now both computers have problems, I see following in the LocationServices.log: "Failed to verify message. Sending MP [SCCMserver]
not in cached MPlist".
But agent was installed on both, has status Yes in the console, but Software Center is not installed.
Please help.Hi,
I did not find errors in the end of ccmsetup.log:
File C:\WINDOWS\ccmsetup\{4D87A80B-6971-43EF-A59F-8088D214378A}\client.msi installation succeeded.
Successfully deleted the ccmsetup service
A Fallback Status Point has not been specified. Message with STATEID='400' will not be sent.
Deleted file C:\WINDOWS\ccmsetup\ccmsetup.xml
CcmSetup is exiting with return code 0
But across the log some errors:
MSI: Action 16:10:48: SmsGenerateFailureMIF.
MSI: Action 16:10:51: CcmRegisterEndpointRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterEndpoint. -
Error installing client via startupscript
I'm having a problem with ConfigMgr 2012 R2 client installation. I'm trying to install client via startup script but it fails every time.
ccmsetup.log from client machine:
<![LOG[==========[ ccmsetup started in process 4092 ]==========]LOG]!><time="16:08:18.288-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="16:08:18.381-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="util.cpp:1837">
<![LOG[Launch from folder \\XXXX\source\Scripts\ConfigMgr_StartupScript\Install\]LOG]!><time="16:08:18.646-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916"
file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:08:18.755-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:727">
<![LOG[Running on 'Microsoft Windows 7 Professional ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:08:18.911-120" date="02-19-2014" component="ccmsetup" context="" type="1"
thread="4916" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "\\XXXX\source\Scripts\ConfigMgr_StartupScript\Install\ccmsetup.exe" /BITSPriority:HIGH /noservice SMSCACHESIZE=8120 SMSSITECODE=PS1 SMSMP=XXXX.XXXX]LOG]!><time="16:08:18.958-120" date="02-19-2014"
component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context=""
type="1" thread="4916" file="ccmsetup.cpp:3775">
<![LOG[Command line: "\\XXXX\source\Scripts\ConfigMgr_StartupScript\Install\ccmsetup.exe" /BITSPriority:HIGH /noservice SMSCACHESIZE=8120 SMSSITECODE=PS1 SMSMP=XXXX.XXXX]LOG]!><time="16:08:19.020-120" date="02-19-2014"
component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="0" thread="4916" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE: 224]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8668">
<![LOG[Lookup MP: XXXX.XXXX]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8702">
<![LOG[FSP: ]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT: 1]LOG]!><time="16:08:19.020-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:8778">
<![LOG[No MP or source location has been explicitly specified. Trying to discover a valid content location...]LOG]!><time="16:08:19.036-120" date="02-19-2014" component="ccmsetup" context="" type="1"
thread="4916" file="ccmsetup.cpp:4729">
<![LOG[Looking for MPs from AD...]LOG]!><time="16:08:19.036-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:4737">
<![LOG[Unexpected row count (0) retrieved from AD.]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="3" thread="4916" file="lsad.cpp:636">
<![LOG[GetADInstallParams failed with 0x80004005]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="3" thread="4916" file="ccmsetup.cpp:304">
<![LOG[Couldn't find an MP source through AD. Error 0x80004005]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:4756">
<![LOG[Current directory '\\XXXX\source\Scripts\ConfigMgr_StartupScript\Install' is not a valid source location.]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="1"
thread="4916" file="ccmsetup.cpp:4796">
<![LOG[No valid source or MP locations could be identified to download content from. Ccmsetup.exe cannot continue.]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="3"
thread="4916" file="ccmsetup.cpp:4806">
<![LOG[Failed to parse '"\\XXXX\source\Scripts\ConfigMgr_StartupScript\Install\ccmsetup.exe" /BITSPriority:HIGH /noservice SMSCACHESIZE=8120 SMSSITECODE=PS1 SMSMP=XXXX.XXXX' with error 0x80004005]LOG]!><time="16:08:19.347-120"
date="02-19-2014" component="ccmsetup" context="" type="3" thread="4916" file="ccmsetup.cpp:4611">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="1"
thread="4916" file="ccmsetup.cpp:9763">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='307' will not be sent.]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="1"
thread="4916" file="ccmsetup.cpp:9763">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="16:08:19.347-120" date="02-19-2014" component="ccmsetup" context="" type="1" thread="4916" file="ccmsetup.cpp:10879">Hi,
Looking for MPs from AD...
Unexpected row count (0) retrieved from AD.
No valid source or MP locations could be identified to download content from. Ccmsetup.exe cannot continue.
Failed to parse '"\\XXXX\source\Scripts\ConfigMgr_StartupScript\Install\ccmsetup.exe"
/BITSPriority:HIGH /noservice SMSCACHESIZE=8120 SMSSITECODE=PS1 SMSMP=XXXX.XXXX' with error 0x80004005
I guess you haven't published your SCCM site to AD.
Here is an official article for your reference.
Configuring Sites to Publish to Active Directory Domain Services
http://technet.microsoft.com/en-us/library/hh696542.aspx.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Do we have to install Client Access mode if we only want mailboxes
Do we have to install Client Access Role if we only want mailboxes, if we do not need that role how do we get the ecp web management program which does not install with just the mailbox role
Hi,
From your description, I would like to clarify the following things:
1. Each organization requires at a minimum one Client Access server and one Mailbox server in the Active Directory forest.
2. Each Active Directory site that contains a Mailbox server should also contain at least one Client Access server.
For more information, here is an article for your reference.
Install Exchange 2013 using the Setup wizard
http://technet.microsoft.com/en-us/library/bb124778(v=exchg.150).aspx
Hope my clarification can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support
I used the setup wizard before purchasing everything and during the installation, one question asked by the wizard, was do you want to install on one machine and my answer was yes, ( these are servers that are to replace on premises
SBS 2003 servers in local charities premises ), I have followed the wizard and still it does not work, I now think the problem might be because I am using different names ( similar to that format used by previous versions of SBS ) for the
internal name and the external domain name, I am using <servername>.domain.local internal and <sameservername>.domain.org.uk for external, now I am trying an install with the following <servernameinternal>.domain.org.uk and <servernameexternal>.domain.org.uk
to see if that might be the problem, some of the text in the wizard suggested using the same name for both internal and external domain names, that is a little fraught with danger, I used the same internal and external method on Linux back in the 1990's and
it caused a few problems.
The problem seems to be when I generate a certificate request for the internally installed Certificate Authority then complete it in Exchange ecp, I then add the services and the internal and external names are listed but it does
not seem to be adding them to the actual Certificate when added to the machine.
Outlook 2010 will now AutoDiscover as long as I install the certificate before or during the setup, Outlook 2007 will corrupt if I do not install the certificate first, I still have no external access but that might be because I am bench
testing before taking it to customer premises, although the name of the server is in the public DNS, so it should work, it sends and receives email OK.
-
Hi All,
I had my primary and only server (I know, I know) running 11.2.4 and upgraded to 11.3. I had problems install/deploying the new agent to 11.2.4 machine. Then I noticed there have been 2 updates since 11.3 - 11.3.1 and FRU 11.3.1. I thought in my innocence that Aha-- these must resolve client deployment issues, surely. I proceeded to update my Primary from 11.3 to 11.3.1 and then FRU 11.3.1. I assume that deploying FRU 11.3.1 will roll up 11.3.1 ( double reboot required) but I am still having issues rolling out this agent to my test machines (32bit and 64bit).
My own machine which has 11.2.4 installed is returning the error "One or more pre-requisite updates failed to install to this device. Ensure all pre-requisite updates have been applied successfully and try again." and the other test machine which is running 11.3.0 (had to remove old 11.2.4 agent to put this on as the deployment didn't work) is also returning the error "One or more pre-requisite updates failed to install to this device. Ensure all pre-requisite updates have been applied successfully and try again.". And this is before general roll out. It's a bit scary to say the least as I anticipate this error on all our machines if I do a general deployment..
Have I missed something somewhere along the way? Dotnet4 is installed on the test machines. How do I find out where it is failing?Update trying to deploy 11.3.1 after installing dotnet4.5 (which by the way crashed my GroupWise client a couple of times it would appear):
ZCC reports "An unknown error has occurred during the deployment. Check the system-update.log on the device for details." - a classic error commonly encountered.
LOG FILE:
DEBUG;Running Pre-Install Commands;;
DEBUG;Getting content for PRE_INSTALL steps of update;;
DEBUG;Got 15 pre install commands;;
DEBUG;Running command: ZENUpdateWatcher;;
DEBUG;Running command: ZENUpdater;;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/bin/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/bin/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/lang/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/lang/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/lang/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/lang/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/lang/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/lang/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/lang/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/lang/${content.0.name};;
DEBUG;Running command: ${content.0.path};${ZENWORKS_HOME}/lang/${content.0.name};;
DEBUG;Getting content for INSTALL steps of update;;
DEBUG;Control file generated (C:\Program Files (x86)\Novell\ZENworks\Logs\system-update\5011030100fc50000000002014070916\update_com mands.xml). Starting update (Update for ZENworks 11 SP3 (11.3.1));;
DEBUG;Launching system updater;;
DEBUG;Attempting to launch process in all sessions: C:\Program Files (x86)\Novell\ZENworks\bin\ZENUpdateWatcher.exe;;
DEBUG;Launching ZENUpdater with argmuments: -w -v -c "C:\Program Files (x86)\Novell\ZENworks\Logs\system-update\5011030100fc50000000002014070916\update_com mands.xml" -g 2d54a159d8109245b7e2e05d2fc2e65c -u https://[ServerIpAddress]/zenworks-systemupdate/ -d 0 -r ;; -
10.6.8 update combined - problems installing
Hi all,
Currently having huge problems installing this update on my mac, have been trying for a couple of days now to get this machine back up and running again after I was told by the genius bar 2 years ago that after them spending nearly 900 pounds on new parts, that they "had no idea what the problem was, but could be something to do with the logic board". I finally decided to sell it, but as a parts and repair it will get £100 and fully working it could get a bit more, so it's in my interest to get it up and running again.
I am by no means a computer expert, but I know a few things and can normally sort problems out by just simply using search, but alas I have finally been beaten, and have come here to ask for some assistance.
After re-installing my macbook pro 3,1 (mid 2007) with it's original 10.4 tiger software probably 5 times before it worked, then moving on to 10.6 snow leopard which also took a couple of attempts, I am now completely stuck with no way to get this machine up to 10.6.8, so that I can make the jump to mountain lion. The software update program is either an absolute heap of dung, or my computer just won't have any of it. I have tried multiple solutions which I will list below:
Using software update to install the 10.6.8 combined update - Failed
Downloading the 10.6.8 combined update from apple support downloads - Failed
Deleting the library/preferencecom.apple.softwareupdate etc. files - Still software update Failed
Downloading 10.6.1 update and installing - Success after a few attempts
Downloading 10.6.8 combined and trying again - Failed
Downloading 10.6.2 update and installing - Failed
Now this is where I am at. I have downloaded these files both on the macbook pro itself, and on my windows laptop - then transfering them across. I have never been more frustrated at a computer in my entire life, and am about 20 minutes away from throwing this laptop out of the window onto a poor bystander below. If anyone has any solution - (and don't say reformat and reinstall the OS - I've already tried that), then it would be greatly appreciated!
I'll post the console message from my last install of just the 10.6.8 combined upate (without using software update) and if someone on here who can make sense of these messages can see a problem or offer a solution, then that would also be greatly appreciated, thanks!
Console message after attempted install:
06/03/2013 13:53:17 com.apple.ocspd[185] dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
06/03/2013 13:53:25 Installer[182] <ZeroSliderSplitView: 0x106dc2c70>: the delegate <TargetSelectPage: 0x106d6d9a0> was sent -splitView:resizeSubviewsWithOldSize: and left the subview frames in an inconsistent state:
06/03/2013 13:53:25 Installer[182] Split view bounds: {{0, 0}, {402, 104}}
06/03/2013 13:53:25 Installer[182] Subview frame: {{0, 0}, {0, 32}}
06/03/2013 13:53:25 Installer[182] Subview frame: {{0, 0}, {402, 104}}
06/03/2013 13:53:25 Installer[182] The outer edges of the subview frames are supposed to line up with the split view's bounds' edges. NSSplitView is working around the problem, perhaps at the cost of more redrawing. (This message is only logged once per NSSplitView.)
06/03/2013 13:53:27 [0x0-0x17017].com.apple.installer[182] dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
06/03/2013 13:53:37 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Console"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.dashboardlauncher"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.frontrowlauncher"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.exposelauncher"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.QuickTimePlayerX"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.spaceslauncher"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.appstore"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.backup.launcher"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.BluetoothFileExchange"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PodcastCapture"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.keychainaccess"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PhotoBooth"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.VoiceOverUtility"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
06/03/2013 13:53:38 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
06/03/2013 13:53:38 com.apple.installd[198] dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
06/03/2013 13:53:50 com.apple.coreservicesd[50] dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.dashboardlauncher"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.frontrowlauncher"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.exposelauncher"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.QuickTimePlayerX"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.spaceslauncher"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.appstore"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.backup.launcher"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.BluetoothFileExchange"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PodcastCapture"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.keychainaccess"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PhotoBooth"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.VoiceOverUtility"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Console"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
06/03/2013 13:53:57 Installer[182] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
06/03/2013 13:53:57 Installer[182] The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.There really shouldn't be any problem downloading that combo update unless you've got a very slow or flaky connection. And Windows doesn't play as well with Mac files as the Mac does with Windows files; who knows what Windows might have done to the update's file integrity.
You might also try downloading the file using another browser such as Firefox. And when you have the updater, reboot into Safe Mode and then run the updater. That way you can be sure there isn't third party software somehow interfering with the update while it's tinkering with the guts of OS X. -
Problem Installing P6 v7 Standalone on Windows 7 64 bit
I am having serious problems installing P6v7 on Windows 7 64 bit, as a Standalone.
I've installed the Oracle database, version 10g, with no problems
When I come to install the P6 software as a standalone installation on a laptop it keeps trying to link to the SQL database - as opposed to Oracle for Standalone - and I end up stuck with it asking for a password to the SQL database {the username is already locked as "sa"}, no standard passwords get me through.
According to my supplier this has happened a few times to others and they are "working on a fix"
Any advice would be most welcome.Hi DeborahZ,
Truthfully, I have nothing else to suggest other than what you have tried. You can however call HP tech support to see if they are able to offer you a discount on a newer model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
Thanks for reaching out to the HP Forums.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
I had a problem installing icloud on windows 8.1. At the end of the installation process there is a error message.What should I do?
I'm guessing that you have checked and complied with the system requirements?
System Requirements
Microsoft Windows 7 or 8
Microsoft Outlook 2007 or later or an up-to-date browser (for Mail, Contacts, Calendars)
Internet Explorer 9 or later, Firefox 22 or later, or Google Chrome 28 or later (for Bookmarks)
Broadband Internet access
Note: If you are upgrading from iCloud Control Panel 1.1 or earlier, you will need to sign out of iCloud Control Panel and uninstall it before downloading iCloud Control Panel 3.1
Maybe you are looking for
-
Direct Show causing "A device attached to the system is not functioning"
Hello, I've been using direct show for about a year to connect to four webcams. I have an intermittent problem where by one of the cameras (at random) will not display the live feed. This could not happen for several weeks possibly months and then s
-
I recently upgrade to iOS 7, and since then, my iPhone turns off automatically at the same time every night for about 30. Why does this happen, and what setting can I change to prevent it?
-
Hi, i m leaning JTable recently, following is an experimental code which i wrote, it has a custom table model and custom tablecellrenderer, the custom tablecellrender determine the column of # of Years greater or equal than 5 should display color gre
-
Guys, Let's say If I have an infocube which has aggregates created on it. In a process chain how would the data flow look like? Is this one correct?? START > DROP INDEXES > LOAD > CREATE INDEX > Roll Up of Filled Aggregates/BIA Indexes Also what abo
-
Get Response on successfull Update(fnSuccess) ODataModel
Hi Experts, Am working in a scenario where my SAPUI application will call Update entityset method in gateway system. Here on successful update my Update entity set will be returning some response in ER_ENTITY. As i see the documentation, I can see t