Problem installing CM patch on EP 640

I my patch install fails when I am asked for the user name and password of the Administrator for the j2ee
I have tried every concievable combination for this install. 
I can log on to the j2ee with the administrator account with no problem, but the patch is failing
Jeremt

Jeremy,
Did you find a solution to fix this issue?
I'm facing with the same problem!
Regards,
Luciano

Similar Messages

  • Problem: installing Recommend Patch Cluster: patch 140900-10 fails

    I don't know if this is correct location for this thread (admin/moderator move as required).
    We have a number of Solaris x86 hosts (ie 4) and I'm trying to get the patched and up to date.
    I obtained the latest Recommended Patch Cluster (dated 28Sep2010).
    I installed it on host A yesterday, 2 hours 9 mins, no problems.
    I tried to install it on host B today, and that was just a critical failure.
    Host B failed to install 140900-01, because the non global zones rejected the patch because dependancy 138218-01 wasn't installed in the non global zones.
    Looking closer, it appears that 138218-01 is for global zone installation only; so it makes sense that the non global zones rejected it.
    However, both hosts were in single user mode when installing the cluster and both hosts have non global zones.
    140900-01 installed on host A with log:
    | This appears to be an attempt to install the same architecture and
    | version of a package which is already installed. This installation
    | will attempt to overwrite this package.
    |
    | Dryrun complete.
    | No changes were made to the system.
    |
    | This appears to be an attempt to install the same architecture and
    | version of a package which is already installed. This installation
    | will attempt to overwrite this package.
    |
    |
    | Installation of <SUNWcsu> was successful.
    140900-1 failed on host B with this log:
    | Validating patches...
    |
    | Loading patches installed on the system...
    |
    | Done!
    |
    | Loading patches requested to install.
    |
    | Done!
    |
    | Checking patches that you specified for installation.
    |
    | Done!
    |
    |
    | Approved patches will be installed in this order:
    |
    | 140900-01
    |
    |
    | Preparing checklist for non-global zone check...
    |
    | Checking non-global zones...
    |
    | Checking non-global zones...
    |
    | Restoring state for non-global zone X...
    | Restoring state for non-global zone Y...
    | Restoring state for non-global zone Z...
    |
    | This patch passes the non-global zone check.
    |
    | None.
    |
    |
    | Summary for zones:
    |
    | Zone X
    |
    | Rejected patches:
    | 140900-01
    | Patches that passed the dependency check:
    | None.
    |
    |
    | Zone Y
    |
    | Rejected patches:
    | 140900-01
    | Patches that passed the dependency check:
    | None.
    |
    |
    | Zone Z
    |
    | Rejected patches:
    | 140900-01
    | Patches that passed the dependency check:
    | None.
    |
    | Fatal failure occurred - impossible to install any patches.
    | X: For patch 140900-01, required patch 138218-01 does not exist.
    | Y: For patch 140900-01, required patch 138218-01 does not exist.
    | Z: For patch 140900-01, required patch 138218-01 does not exist.
    | Fatal failure occurred - impossible to install any patches.
    | ----
    | patchadd exit code : 1
    | application of 140900-01 failed : unhandled subprocess exit status '1' (exit 1 b
    | ranch)
    | finish time : 2010.10.02 09:47:18
    | FINISHED : application of 140900-01
    It looks as if the patch strategy is completely different for the two hosts; both are solaris x86 (A is a V40z; B is a V20z).
    Trying to use "-G" with patchadd crabs the patch is for global zones only and stops (ie it's almost as if it thinks installation is being attempted in a non global zone).
    Without "-G" same behavior as patch cluster install attempt (no surprise there).
    I have inherited this machines; I am told each of these machines were upgraded to Solaris 10u6 in June 2009.
    Other than the 4-5 months it took oracle to get our update entitlement to us, we've had no problems.
    I'm at a loss here, I don't see anyone else having this type of issue.
    Can someone point the way...?
    What am I missing...?

    Well, I guess what you see isn't what you get.
    Guess I'm used to the fact USENET just left things formatted the way they were :-O

  • Problem installing Database Instance of WAS 640

    Help,
    I am installing the WAS 640 SR1  on a sandbox running Windows 2003 Server.
    I've installed Oracle.
    Installed the Central Instance.
    But when I try to install the database instance with SAPInst, it gets to the stage:
    Prepare Oracle Network Configuration
    It then copies the Listener.ora and creates a new file Listener.1.ora
    Then the installation fails with the message:
    Unable to set time for file listener.1.ora
    Does anyone know how to solve this and continue the installation ?
    Thanks,
    Tomas.

    Hi Tomas,
    Firstly check that you are full administrator of the OS and check the following policy privileges are assigned to your user:
    Act as part of the operating system
    Increase quotas
    Replace a process level token
    Do this via:
    Navigate to the security policy console via:
    Start Menu>Settings>Control Panel>Administrative tools>Local Security Policy
    In the window for the Local Security Policy you will find each of the following policy above.
    Double click on each of the items listed & click the button “Add User or Group”. In the next window enter the username that you are performing the installation with and apply.
    If still the problem occurs "Take ownership" of the file system using the account that you are logged in with.
    This should get you past the problem
    Cheers
    Daniel

  • Problem install Recommended Patch cluster

    Trying to install the Recommended patch cluster on Ultra 45s, on each one, the 40th patch, 120272-28, fails, and I don't understand why. Here's the snippet from the log:
    STARTING : application of 120272-28
    start time : 2010.11.30 08:41:42
    # /usr/sbin/patchadd 120272-28
    Validating patches...
    Loading patches installed on the system...
    Done!
    Loading patches requested to install.
    Done!
    The following requested patches have packages not installed on the system
    Package SUNWsmaS from directory SUNWsmaS in patch 120272-28 is not installed on the system. Changes for package SUNWsmaS will not be applied to the system.
    Checking patches that you specified for installation.
    Done!
    The following requested patches will not be installed because
    they are incompatible with patches already installed or with
    other patches that you have specified for installation. In order to install these
    requested patches you should resolve this incompatibility
    by removing incompatible patches from requested-to-install set
    or from the system.
    0 Patch 120272-28 is declared as incompatible by IDR138540-01, which has already been installed on the system.
    No patches to install.
    patchadd exit code : 3
    application of 120272-28 failed : unhandled subprocess exit status '3' (exit n branch)
    finish time : 2010.11.30 08:41:42
    FINISHED : application of 120272-28
    I don't understand why it fails, rather than just being "skipped", as several other patches are. I assume the failure isn't coming from the fact that it's been declared incompatible, but rather the "unhandled subprocess exit status". How do I determine what that is?
    Or, better yet, how do I tell the installcluster script to just not do that one?
    Thanks!

    did you try and removed the IDR? I.e: patchrm IDR138540-01 ?
    .7/M.

  • Problem installing Patch to upgrade to Sun One 6.1SP7

    Hi,
    About a year ago, we installed Sun One 6.1 SP6. When the application was installed, it was installed to a the non-default location. Instead of /opt/SUNWwbsrv directory, we chose to install it to /app/netscape61.
    Now that SP7 is available, I'm having problems installing the patch.
    When I use patchadd, it says it cannot find SUNWwbsrv installation so it quits.
    I've tried "patchadd -M /tmp/116648-19 -R /app/netscape61"
    Where /tmp/116648-19 is the source patch directory and /app/netscape61 is where I installed netscape61SP6.
    Can someone tell me the correct syntax to use?
    Thanks,
    Bruce

    Hi Bruce,
    Did you install 6.1 SP6 using the packages or using the point product(non package based)? If you had installed 6.1 SP6 as a point product, then patchadd is not the way to upgrade. You can check by running the pkginfo command as follows:
    # pkginfo SUNWwbsvr
    If the above command fails with "not found" then you probably have the point product(non package based install) of WS installed. In that case, you can upgrade using the SP7 bits from here:
    http://www.sun.com/download/products.xml?id=45c90ca9
    Hope it helps.
    Thanks
    Manish

  • Problems installing SAP GUI 7.1 patch level 4 for Bex Analyzer

    Hi all,
    I have a problem installing the SAP GUI for BW - running office 2003, have tried to install without success.  The old Bex tools seem to work, but not the new ones and when opening any of the tools report designer or web application designer I get the error : System configured incorrectly.  The new functionality in Bex Analyzer do not respond when clicking on the icons.
    Thanks,
    Dirko

    Hello
    please download the compialtion 3 cd of sapgui 710.
    http://service.sap.com/installations
    Entry by Application Group
    SAP Frontend Components
      SAP GUI FOR WINDOWS
       SAP GUI FOR WINDOWS 7.10 CORE
        Installation
    Compilation 3 cd is delivered with the sapgui patch level 11!
    Also the sapgui patche you can find in
    http://service.sap.com/patches
    Best Regards
    Sven

  • Problem installing 5-1-0-44-6 patch

    I have a problem with the instalation 5.1.0.44.6 patch in ACS 5.1
    When I try to install the patch with the command acs patch install, the ACS say me "Patch 5.1.0.55.6 is already installed". If I try to remove the patch, the ACS say me "patch 5.1.0.44.6 is not istalled". In the show version output command the version is 5.1.0.44
    temis/admin# acs patch install 5-1-0-44-6.tar.gpg repository Repositorio_Backup
    Patch '5-1-0-44-6' is already installed.
    % Error: Failure to open / validate the patch
    temis/admin# acs patch remove 5-1-0-44-6.tar.gpg
    % Error: Patch 5-1-0-44-6.tar.gpg is not installed.
    temis/admin# sh ver
    Cisco Application Deployment Engine OS Release: 1.2
    ADE-OS Build Version: 1.2.0.146
    ADE-OS System Architecture: i386
    Copyright (c) 2005-2009 by Cisco Systems, Inc.
    All rights reserved.
    Hostname: temis
    Version information of installed applications
    Cisco ACS VERSION INFORMATION
    Version : 5.1.0.44
    Internal Build ID : B.2347
    Any ideas? tnx for help.

    Hi,
    Please open a TAC case to have one of our engineers remove the patch and then install patch 6 again.
    Thanks,
    Tarik Admani

  • Sol9 12/03 OS full install + 9_Recommended patch problem

    Installing Sol9 12/03 on a SunFire 280r then installing the most recent 9_Recommended cluster (04/01/2004), this is the output during installation of 9_Recommended;
    Installing 113718-02...
    Installation of 113718-02 failed. Return code 35.
    Installing 113574-03...
    Installation of 113574-03 failed. Return code 35.
    Looking over SunSolve I see these packages have been withdrawn and backed out to a previous revisions.
    Sol9 12/03 OS installs;
    113718-03
    113574-07
    9_Recommended from 04/01/2004 tries to installl;
    113718-02
    113574-03
    SunSolve shows as current;
    113718-02
    113574-03
    Here is the uname -a;
    # uname -a
    SunOS hostname 5.9 Generic_112233-11 sun4u sparc SUNW,Sun-Fire-280R
    How can I backout or down version an OS installed package ?

    Unjar your files and you might see the premissions are not set for the post or pre scripts. I am not sure if this is a feature or there for protection in forcing one to install the patches by had , if you down load the zip version the perm are probable set.

  • TS4088 What happens if problems persist after I install the patch?

    I've installed the software patch a few times and find that for a few days to a few weeks the intermittent loss of video seems fixed, and then it will come back with several blackouts in a short span of time, which prompts me to install the patch again...
    Anyway, I'm wondering if there's a chance that upgrading my OS will fix it? Or is it just time to go to Genius bar and be w/o my machine for a while?

    The information is here:
    http://support.apple.com/kb/ts4088
    Changing OS will not solve the issue.  A genius bar appointment is the best option.
    Ciao.

  • Problems installing patch cluster

    hello. i recently installed solaris 8 x86 and was trying to install the solaris 8 x86 patch cluster. so i downloaded the zip file and then unzipped it a directory called patch. i then run the install_cluster file (as specified on the cluster_readme file) and get thru the prompt that says it will check for adequate space. After that, the script tries to install the patches, but fails on each one. every patch fails because it says the patch directory is not valid and returns the error code 1. i even tried manually installing a patch via the patchadd command and the same error message occurs.
    can someone tell me what im doing wrong or forgot to do? many thx.
    ~fl~

    If you open the directory in CDE's file manager, right click on the zipped file and select unzip. The cluster will be unzipped to a directory structure called x86_recommended or something of the sort. Change to that directory to run the patch cluster install script. The patch script is looking for that directory structure.
    Lee

  • Problem Installing patch 2 CDA

    Hi, I'm trying to install CDA Context Directory Agent, but when I install the patch 2 (cda-patchbundle_1.0.0.011-2.i386.tar) , there's the error : "Manifest File not found".
    So I checked the content of the patch 2 and there's no manifest file inside, but for patch 1 and 3 , they have a manifest file in their content.
    Can anyone tell me what is the correct way to install these patches please?

    Note:295900.1 helped me.
    - renaming all the dll beginning with oci*.dll in the bin directory.
    - reboot the PC
    - restart the patchset install
    - and it worked
    Thank you All..

  • Problems installing Grid Control on sparc 5.8

    problems installing Grid Control on sparc 5.8......After entering the parent directory and clicking next, the "preparing to install, Please wait, this will take a moment" screen comes up. It seems like this goes into an infinite loop. Any ideas?

    Using paramFile: /u02/10gEM/10gEM_R2/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 5.6, 5.7, 5.8, 5.9 or 5.10. Actual 5.8
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 1777 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 1798 MB Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 256 Passed
    All installer requirements met.
    Checking operating system patches: 108652-66,108921-16,108940-53,108773-18,111310-01,109147-24,111308-03,111111-03,112396-02,110386-03,111023-
    02,108987-13,108528-21,108989-02,108993-18 Passed
    Checking for patch 108652-66; found 108652-66
    Checking for patch 108921-16; found 108921-21
    Checking for patch 108940-53; found 108940-63
    Checking for patch 108773-18; found 108773-18
    Checking for patch 111310-01; found 111310-01
    Checking for patch 109147-24; found 109147-30
    Checking for patch 111308-03; found 111308-05
    Checking for patch 111111-03; found 111111-03
    Checking for patch 112396-02; found 112396-02
    Checking for patch 110386-03; found 110386-03
    Checking for patch 111023-02; found 111023-03
    Checking for patch 108987-13; found 108987-13
    Checking for patch 108528-21; found 108528-29
    Checking for patch 108989-02; found 108989-02
    Checking for patch 108993-18; found 108993-18
    The commandline for unzip:
    /u02/10gEM/10gEM_R2/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.0/1/DataFiles/\*.jar -d /tmp/OraInstall2007-03-14_10-46-21AM
    The commandline for unzip:
    /u02/10gEM/10gEM_R2/install/unzip -qqq ../stage/Components/oracle.swd.oui/10.2.0.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2007-03-14_10-46-21A
    M
    The commandline for unzip:
    /u02/10gEM/10gEM_R2/install/unzip -qqq ../stage/Components/oracle.swd.oui.core/10.2.0.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2007-03-14_10-4
    6-21AM
    The number of files bootstrapped for the jre is 640.
    The number of files bootstrapped for the oui is 94.
    Execvp of the child jre : the cmdline is /tmp/OraInstall2007-03-14_10-46-21AM/jre/1.4.2/bin/java, and the argv is
    /tmp/OraInstall2007-03-14_10-46-21AM/jre/1.4.2/bin/java
    -Doracle.installer.library_loc=/tmp/OraInstall2007-03-14_10-46-21AM/oui/lib/solaris
    -Doracle.installer.oui_loc=/tmp/OraInstall2007-03-14_10-46-21AM/oui
    -Doracle.installer.bootstrap=TRUE
    -Doracle.installer.startup_location=/u02/10gEM/10gEM_R2/install
    -Doracle.installer.jre_loc=/tmp/OraInstall2007-03-14_10-46-21AM/jre/1.4.2
    -Doracle.installer.nlsEnabled="TRUE"
    -Doracle.installer.prereqConfigLoc=
    -Doracle.installer.unixVersion=5.8
    -Djava.net.preferIPv4Stack=true
    -mx150m
    -cp
    The commandline for unzip:
    /u02/10gEM/10gEM_R2/install/unzip -qqq ../stage/Components/oracle.swd.oui.core/10.2.0.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2007-03-14_10-4
    6-21AM
    The number of files bootstrapped for the jre is 640.
    The number of files bootstrapped for the oui is 94.
    Execvp of the child jre : the cmdline is /tmp/OraInstall2007-03-14_10-46-21AM/jre/1.4.2/bin/java, and the argv is
    /tmp/OraInstall2007-03-14_10-46-21AM/jre/1.4.2/bin/java
    -Doracle.installer.library_loc=/tmp/OraInstall2007-03-14_10-46-21AM/oui/lib/solaris
    -Doracle.installer.oui_loc=/tmp/OraInstall2007-03-14_10-46-21AM/oui
    -Doracle.installer.bootstrap=TRUE
    -Doracle.installer.startup_location=/u02/10gEM/10gEM_R2/install
    -Doracle.installer.jre_loc=/tmp/OraInstall2007-03-14_10-46-21AM/jre/1.4.2
    -Doracle.installer.nlsEnabled="TRUE"
    -Doracle.installer.prereqConfigLoc=
    -Doracle.installer.unixVersion=5.8
    -Djava.net.preferIPv4Stack=true
    -mx150m
    -cp
    /tmp/OraInstall2007-03-14_10-46-21AM:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/j
    lib/oneclick.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/srvm.jar:/tmp/Ora
    Install2007-03-14_10-46-21AM/oui/jlib/share.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2007-03-14_10
    -46-21AM/oui/jlib/xml.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/or
    ai18n-mapping.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/emCfg.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/ojmisc.jar:/tmp/OraIns
    tall2007-03-14_10-46-21AM/oui/jlib/InstImages.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/InstHelp.jar:/tmp/OraInstall2007-03-14_10-46-2
    1AM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/InstH
    elp_fr.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/InstHelp_ja.jar:/tmp/Or
    aInstall2007-03-14_10-46-21AM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2007-03
    -14_10-46-21AM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2007-03-14_10-46-21
    AM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/help4.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/help4-nls.jar
    :/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/ewt3.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2007
    -03-14_10-46-21AM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/swingaccess.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui
    /jlib/classes12.jar::/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2007-03-14_10-46-21AM/oui/jlib/jewt4.jar:/tmp/
    OraInstall2007-03-14_10-46-21AM/oui/jlib/jewt4-nls.jar:/tmp/OraInstall2007-03-14_10-46-21AM/ext/jlib/em_1click_help.jar:/tmp/OraInstall2007-03
    -14_10-46-21AM/ext/jlib/em_1click_help_de.jar:/tmp/OraInstall2007-03-14_10-46-21AM/ext/jlib/em_1click_help_es.jar:/tmp/OraInstall2007-03-14_10
    -46-21AM/ext/jlib/em_1click_help_fr.jar:/tmp/OraInstall2007-03-14_10-46-21AM/ext/jlib/em_1click_help_it.jar:/tmp/OraInstall2007-03-14_10-46-21
    AM/ext/jlib/em_1click_help_ja.jar:/tmp/OraInstall2007-03-14_10-46-21AM/ext/jlib/em_1click_help_ko.jar:/tmp/OraInstall2007-03-14_10-46-21AM/ext
    /jlib/em_1click_help_pt_BR.jar:/tmp/OraInstall2007-03-14_10-46-21AM/ext/jlib/em_1click_help_zh_CN.jar:/tmp/OraInstall2007-03-14_10-46-21AM/ext
    /jlib/em_1click_help_zh_TW.jar:/tmp/OraInstall2007-03-14_10-46-21AM/ext/jlib/cfmlogger_properties.jar
    oracle.sysman.emgc.oneclick.OneStartup
    -scratchPath
    /tmp/OraInstall2007-03-14_10-46-21AM
    -sourceLoc
    /u02/10gEM/10gEM_R2/install/../stage/products.xml
    -sourceType
    network
    -timestamp
    2007-03-14_10-46-21AM
    -nowelcome

  • Problems installing Adobe Air and BBC iPlayer Desktop

    Problems installing Adobe Air and BBC iPlayer Desktop
    I'm running Windows 7 32 bit on an ASUS netbook with 2mb ram. I installed both  Air 3.7 and BBC iPlayer Desktop using Google Chrome. I downloaded 3 BBC programmes. Two ran fine but the third wouldn't start and I kept getting a message to try again later. I deleted this programme and downloaded it again, with the same result.
    So I uninstalled both Air and the BBC iPlayer Desktop, the Air exe file and the two folders at the following locations:
    C:\Users\USERNAME\AppData\Roaming\Adobe\AIR\   and
    C:\Users\USERNAME\AppData\Roaming\BBCiPlayerDesktop.xxx
    Since doing this each time I try to install Air either on its own or with the BBC iPlayer software I get the message part way through installation:
    "Sorry, an error has occurred.
    An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
    I have run the Microsoft Fix it programme and still get the same result.
    I have tried everything on your Trouble Shooting page apart from the bit about the elevated command prompt, but as I'm the sole user and administrator, that seems unnecessary.
    I have closed Chrome and tried installation using Windows Explorer but with the same result.
    I have tried all the above with Microsoft Security Essentials running and disabled. And I have tried the same with Astrill on and off.
    I have had a response from the BBC with much the same advice as appears on your trouble shooting page.
    Here is the Air installation log, followed by the MSI log.
    [2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:06:53:46] Commandline is:
    [2013-04-25:06:53:46] No installed runtime detected
    [2013-04-25:06:53:57] Relaunching with elevation
    [2013-04-25:06:53:57] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
    [2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
    [2013-04-25:06:54:02] No installed runtime detected
    [2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp
    \air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:54:10] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local
    \temp\air79c1.tmp\setup.msi
    [2013-04-25:06:54:10] Rollback complete
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Runtime Installer end with exit code 7
    [2013-04-25:06:54:20] Runtime Installer end with exit code 7
    [2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:06:55:38] Commandline is:
    [2013-04-25:06:55:38] No installed runtime detected
    [2013-04-25:06:55:45] Relaunching with elevation
    [2013-04-25:06:55:45] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
    [2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
    [2013-04-25:06:55:48] No installed runtime detected
    [2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp
    \air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:55:55] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local
    \temp\air30fe.tmp\setup.msi
    [2013-04-25:06:55:55] Rollback complete
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Runtime Installer end with exit code 7
    [2013-04-25:06:55:59] Runtime Installer end with exit code 7
    [2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:05:12] Commandline is:
    [2013-04-25:07:05:12] No installed runtime detected
    [2013-04-25:07:05:18] Relaunching with elevation
    [2013-04-25:07:05:18] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
    [2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
    [2013-04-25:07:05:24] No installed runtime detected
    [2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp
    \air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:05:29] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local
    \temp\air953.tmp\setup.msi
    [2013-04-25:07:05:29] Rollback complete
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Runtime Installer end with exit code 7
    [2013-04-25:07:05:31] Runtime Installer end with exit code 7
    [2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:07:06:12] Commandline is:
    [2013-04-25:07:06:12] No installed runtime detected
    [2013-04-25:07:06:21] Relaunching with elevation
    [2013-04-25:07:06:22] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
    [2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
    [2013-04-25:07:06:32] No installed runtime detected
    [2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp
    \aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:06:37] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local
    \temp\aire916.tmp\setup.msi
    [2013-04-25:07:06:37] Rollback complete
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Runtime Installer end with exit code 7
    [2013-04-25:07:06:40] Runtime Installer end with exit code 7
    [2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:07:26:15] Commandline is:
    [2013-04-25:07:26:15] No installed runtime detected
    [2013-04-25:07:26:28] Relaunching with elevation
    [2013-04-25:07:26:28] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
    [2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
    [2013-04-25:07:26:37] No installed runtime detected
    [2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp
    \air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:26:48] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local
    \temp\air3063.tmp\setup.msi
    [2013-04-25:07:26:48] Rollback complete
    [2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:26:48] Runtime Installer end with exit code 7
    [2013-04-25:07:46:09] Runtime Installer end with exit code 7
    === Verbose logging started: 25/04/2013  08:34:51  Build type: SHIP UNICODE
    5.00.7601.00  Calling process: C:\windows\System32\msiexec.exe ===
    MSI (c) (68:6C) [08:34:51:397]: Font created.  Charset: Req=0, Ret=0, Font:
    Req=MS Shell Dlg, Ret=MS Shell Dlg
    MSI (c) (68:6C) [08:34:51:397]: Font created.  Charset: Req=0, Ret=0, Font:
    Req=MS Shell Dlg, Ret=MS Shell Dlg
    MSI (c) (68:70) [08:34:51:469]: Resetting cached policy values
    MSI (c) (68:70) [08:34:51:469]: Machine policy value 'Debug' is 0
    MSI (c) (68:70) [08:34:51:469]: ******* RunEngine:
               ******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (68:70) [08:34:51:473]: Machine policy value 'DisableUserInstalls' is 0
    MSI (c) (68:70) [08:34:51:653]: SOFTWARE RESTRICTION POLICY: Verifying
    package --> 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi' against
    software restriction policy
    MSI (c) (68:70) [08:34:51:654]: SOFTWARE RESTRICTION POLICY: C:\Users
    \Steve\Downloads\MicrosoftFixit50381.msi has a digital signature
    MSI (c) (68:70) [08:34:51:966]: SOFTWARE RESTRICTION POLICY: C:\Users
    \Steve\Downloads\MicrosoftFixit50381.msi is permitted to run at the
    'unrestricted' authorization level.
    MSI (c) (68:70) [08:34:51:986]: Cloaking enabled.
    MSI (c) (68:70) [08:34:51:986]: Attempting to enable all disabled privileges
    before calling Install on Server
    MSI (c) (68:70) [08:34:52:001]: End dialog not enabled
    MSI (c) (68:70) [08:34:52:001]: Original package ==> C:\Users\Steve
    \Downloads\MicrosoftFixit50381.msi
    MSI (c) (68:70) [08:34:52:001]: Package we're running from ==> C:\Users
    \Steve\Downloads\MicrosoftFixit50381.msi
    MSI (c) (68:70) [08:34:52:010]: APPCOMPAT: Compatibility mode property
    overrides found.
    MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: looking for appcompat database
    entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
    MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: no matching ProductCode found
    in database.
    MSI (c) (68:70) [08:34:52:041]: MSCOREE not loaded loading copy from
    system32
    MSI (c) (68:70) [08:34:52:063]: Machine policy value 'TransformsSecure' is 0
    MSI (c) (68:70) [08:34:52:063]: User policy value 'TransformsAtSource' is 0
    MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: File 3: -2147287038
    MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
    MSI (c) (68:70) [08:34:52:065]: Machine policy value 'DisablePatch' is 0
    MSI (c) (68:70) [08:34:52:065]: Machine policy value 'AllowLockdownPatch' is
    0
    MSI (c) (68:70) [08:34:52:066]: Machine policy value 'DisableMsi' is 0
    MSI (c) (68:70) [08:34:52:066]: Machine policy value 'AlwaysInstallElevated' is
    0
    MSI (c) (68:70) [08:34:52:066]: User policy value 'AlwaysInstallElevated' is 0
    MSI (c) (68:70) [08:34:52:066]: Running product '{55D13F49-FCB8-4892-
    8266-05D373FCAA61}' with user privileges: It's not assigned.
    MSI (c) (68:70) [08:34:52:067]: Machine policy value 'DisableLUAPatching' is 0
    MSI (c) (68:70) [08:34:52:067]: Machine policy value
    'DisableFlyWeightPatching' is 0
    MSI (c) (68:70) [08:34:52:068]: Enabling baseline caching for this transaction
    since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor
    update patch is active
    MSI (c) (68:70) [08:34:52:071]: APPCOMPAT: looking for appcompat database
    entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
    MSI (c) (68:70) [08:34:52:072]: APPCOMPAT: no matching ProductCode found
    in database.
    MSI (c) (68:70) [08:34:52:072]: Transforms are not secure.
    MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding MsiLogFileLocation
    property. Its value is 'C:\Users\Steve\AppData\Local\Temp\MSIa5745.LOG'.
    MSI (c) (68:70) [08:34:52:073]: Command Line: CURRENTDIRECTORY=C:\Users
    \Steve\Downloads CLIENTUILEVEL=0 CLIENTPROCESSID=9576
    MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding PackageCode
    property. Its value is '{1C7C3009-013E-4A16-9A0F-0000FB80A613}'.
    MSI (c) (68:70) [08:34:52:073]: Product Code passed to Engine.Initialize:        
    MSI (c) (68:70) [08:34:52:073]: Product Code from property table before
    transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
    MSI (c) (68:70) [08:34:52:073]: Product Code from property table after
    transforms:  '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
    MSI (c) (68:70) [08:34:52:073]: Product not registered: beginning first-time
    install
    MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding ProductState
    property. Its value is '-1'.
    MSI (c) (68:70) [08:34:52:073]: Entering
    CMsiConfigurationManager::SetLastUsedSource.
    MSI (c) (68:70) [08:34:52:073]: User policy value 'SearchOrder' is 'nmu'
    MSI (c) (68:70) [08:34:52:073]: Adding new sources is allowed.
    MSI (c) (68:70) [08:34:52:074]: PROPERTY CHANGE: Adding
    PackagecodeChanging property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:074]: Package name extracted from package path:
    'MicrosoftFixit50381.msi'
    MSI (c) (68:70) [08:34:52:075]: Package to be registered:
    'MicrosoftFixit50381.msi'
    MSI (c) (68:70) [08:34:52:075]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (c) (68:70) [08:34:52:078]: Note: 1: 2262 2: AdminProperties 3: -
    2147287038
    MSI (c) (68:70) [08:34:52:078]: Machine policy value 'AlwaysInstallElevated' is
    0
    MSI (c) (68:70) [08:34:52:078]: User policy value 'AlwaysInstallElevated' is 0
    MSI (c) (68:70) [08:34:52:079]: Running product '{55D13F49-FCB8-4892-
    8266-05D373FCAA61}' with user privileges: It's not assigned.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
    CURRENTDIRECTORY property. Its value is 'C:\Users\Steve\Downloads'.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTUILEVEL
    property. Its value is '0'.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTPROCESSID
    property. Its value is '9576'.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
    MsiSystemRebootPending property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:079]: TRANSFORMS property is now:
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding VersionDatabase
    property. Its value is '200'.
    MSI (c) (68:70) [08:34:52:081]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming
    MSI (c) (68:70) [08:34:52:082]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Favorites
    MSI (c) (68:70) [08:34:52:084]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (c) (68:70) [08:34:52:085]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Documents
    MSI (c) (68:70) [08:34:52:086]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (c) (68:70) [08:34:52:088]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Recent
    MSI (c) (68:70) [08:34:52:089]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (c) (68:70) [08:34:52:091]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Templates
    MSI (c) (68:70) [08:34:52:092]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData
    MSI (c) (68:70) [08:34:52:093]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Local
    MSI (c) (68:70) [08:34:52:094]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Pictures
    MSI (c) (68:70) [08:34:52:097]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    \Administrative Tools
    MSI (c) (68:70) [08:34:52:098]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    \Startup
    MSI (c) (68:70) [08:34:52:099]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (c) (68:70) [08:34:52:101]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (c) (68:70) [08:34:52:102]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Desktop
    MSI (c) (68:70) [08:34:52:104]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (c) (68:70) [08:34:52:107]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu
    MSI (c) (68:70) [08:34:52:109]: SHELL32::SHGetFolderPath returned: C:
    \Users\Public\Desktop
    MSI (c) (68:70) [08:34:52:113]: SHELL32::SHGetFolderPath returned: C:
    \windows\Fonts
    MSI (c) (68:70) [08:34:52:115]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans
    Serif 4: 0 5: 16
    MSI (c) (68:70) [08:34:52:147]: MSI_LUA: Setting AdminUser property to 1
    because this is the client or the user has already permitted elevation
    MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding AdminUser
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding Privileged
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:148]: Note: 1: 1402 2: HKEY_CURRENT_USER
    \Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (68:70) [08:34:52:148]: PROPERTY CHANGE: Adding USERNAME
    property. Its value is 'Steve'.
    MSI (c) (68:70) [08:34:52:149]: Note: 1: 1402 2: HKEY_CURRENT_USER
    \Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding DATABASE
    property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding OriginalDatabase
    property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
    MSI (c) (68:70) [08:34:52:149]: Machine policy value 'MsiDisableEmbeddedUI' is
    0
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SourceDir
    property. Its value is 'C:\Users\Steve\Downloads\'.
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SOURCEDIR
    property. Its value is 'C:\Users\Steve\Downloads\'.
    MSI (c) (68:6C) [08:34:52:153]: PROPERTY CHANGE: Adding VersionHandler
    property. Its value is '5.00'.
    === Logging started: 25/04/2013  08:34:52 ===
    MSI (c) (68:70) [08:34:52:171]: Note: 1: 2262 2: PatchPackage 3: -
    2147287038
    MSI (c) (68:70) [08:34:52:172]: Machine policy value 'DisableRollback' is 0
    MSI (c) (68:70) [08:34:52:172]: User policy value 'DisableRollback' is 0
    MSI (c) (68:70) [08:34:52:172]: PROPERTY CHANGE: Adding UILevel property.
    Its value is '5'.
    MSI (c) (68:70) [08:34:52:172]: Note: 1: 2262 2: Font 3: -2147287038
    MSI (c) (68:70) [08:34:52:174]: PROPERTY CHANGE: Adding ACTION property.
    Its value is 'INSTALL'.
    MSI (c) (68:70) [08:34:52:174]: Doing action: INSTALL
    Action 08:34:52: INSTALL.
    Action start 08:34:52: INSTALL.
    MSI (c) (68:70) [08:34:52:176]: UI Sequence table 'InstallUISequence' is
    present and populated.
    MSI (c) (68:70) [08:34:52:176]: Running UISequence
    MSI (c) (68:70) [08:34:52:176]: PROPERTY CHANGE: Adding EXECUTEACTION
    property. Its value is 'INSTALL'.
    MSI (c) (68:70) [08:34:52:176]: Doing action: Milestone_ERRCA_UIAN726
    Action 08:34:52: Milestone_ERRCA_UIAN726.
    Action start 08:34:52: Milestone_ERRCA_UIAN726.
    MSI (c) (68:70) [08:34:52:177]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_ERRCA_UIAN726'
    MSI (c) (68:70) [08:34:52:178]: PROPERTY CHANGE: Adding Milestone
    property. Its value is 'ERRCA_UIANDADVERTISED'.
    Action ended 08:34:52: Milestone_ERRCA_UIAN726. Return value 1.
    MSI (c) (68:70) [08:34:52:178]: Skipping action: ERRCA_UIANDADVERTISED
    (condition is false)
    MSI (c) (68:70) [08:34:52:178]: Doing action: Milestone_AppSearch122
    Action 08:34:52: Milestone_AppSearch122.
    Action start 08:34:52: Milestone_AppSearch122.
    MSI (c) (68:70) [08:34:52:180]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_AppSearch122'
    MSI (c) (68:70) [08:34:52:180]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'ERRCA_UIANDADVERTISED'. Its new value:
    'AppSearch'.
    Action ended 08:34:52: Milestone_AppSearch122. Return value 1.
    MSI (c) (68:70) [08:34:52:181]: Doing action: AppSearch
    Action 08:34:52: AppSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:52: AppSearch.
    MSI (c) (68:70) [08:34:52:182]: Note: 1: 2262 2: AppSearch 3: -2147287038
    Action ended 08:34:52: AppSearch. Return value 1.
    MSI (c) (68:70) [08:34:52:183]: Doing action: FindRelatedProducts
    Action 08:34:52: FindRelatedProducts. {\FinalUIFont}
    [PROGRESS_RESTORE_TXT]
    Action start 08:34:52: FindRelatedProducts.
    Action ended 08:34:52: FindRelatedProducts. Return value 1.
    MSI (c) (68:70) [08:34:52:185]: Doing action: Milestone_EulaForm201
    Action 08:34:52: Milestone_EulaForm201.
    Action start 08:34:52: Milestone_EulaForm201.
    MSI (c) (68:70) [08:34:52:186]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_EulaForm201'
    MSI (c) (68:70) [08:34:52:187]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'AppSearch'. Its new value: 'EulaForm'.
    Action ended 08:34:52: Milestone_EulaForm201. Return value 1.
    MSI (c) (68:70) [08:34:52:187]: Doing action: EulaForm
    Action 08:34:52: EulaForm.
    Action start 08:34:52: EulaForm.
    MSI (c) (68:70) [08:34:52:193]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'EulaForm'
    MSI (c) (68:6C) [08:34:52:205]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For VSI_MS_Sans_Serif13.0_0_0 textstyle, the system created a 'MS
    Sans Serif' font, in 0 character set, of 13 pixels height.
    MSI (c) (68:6C) [08:34:52:221]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400
    textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13
    pixels height.
    MSI (c) (68:6C) [08:34:52:225]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For VSI_MS_Sans_Serif16.0_1_0 textstyle, the system created a 'MS
    Sans Serif' font, in 0 character set, of 20 pixels height.
    MSI (c) (68:6C) [08:34:52:301]: Note: 1: 2262 2: CheckBox 3: -2147287038
    Action 08:34:52: EulaForm. Dialog created
    MSI (c) (68:10) [08:34:52:312]: Note: 1: 2731 2: 0
    MSI (c) (68:6C) [08:34:55:670]: PROPERTY CHANGE: Adding EulaForm_Property
    property. Its value is '1'.
    Action ended 08:34:56: EulaForm. Return value 1.
    MSI (c) (68:70) [08:34:56:881]: Doing action: EULAACCEPTED_ACTION
    Action 08:34:56: EULAACCEPTED_ACTION.
    Action start 08:34:56: EULAACCEPTED_ACTION.
    MSI (c) (68:70) [08:34:56:883]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'EULAACCEPTED_ACTION'
    MSI (c) (68:70) [08:34:56:883]: PROPERTY CHANGE: Adding EULAACCEPTED
    property. Its value is '1'.
    Action ended 08:34:56: EULAACCEPTED_ACTION. Return value 1.
    MSI (c) (68:70) [08:34:56:884]: Doing action: Milestone_LaunchCond24
    Action 08:34:56: Milestone_LaunchCond24.
    Action start 08:34:56: Milestone_LaunchCond24.
    MSI (c) (68:70) [08:34:56:886]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_LaunchCond24'
    MSI (c) (68:70) [08:34:56:887]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'EulaForm'. Its new value: 'LaunchConditions'.
    Action ended 08:34:56: Milestone_LaunchCond24. Return value 1.
    MSI (c) (68:70) [08:34:56:889]: Doing action: LaunchConditions
    Action 08:34:56: LaunchConditions. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: LaunchConditions.
    Action ended 08:34:56: LaunchConditions. Return value 1.
    MSI (c) (68:70) [08:34:56:891]: Doing action: CCPSearch
    Action 08:34:56: CCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: CCPSearch.
    MSI (c) (68:70) [08:34:56:892]: Note: 1: 2262 2: CCPSearch 3: -2147287038
    Action ended 08:34:56: CCPSearch. Return value 1.
    MSI (c) (68:70) [08:34:56:892]: Doing action: RMCCPSearch
    Action 08:34:56: RMCCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: RMCCPSearch.
    MSI (c) (68:70) [08:34:56:893]: Note: 1: 2262 2: CCPSearch 3: -2147287038
    Action ended 08:34:56: RMCCPSearch. Return value 0.
    MSI (c) (68:70) [08:34:56:894]: Doing action: ValidateProductID
    Action 08:34:56: ValidateProductID. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: ValidateProductID.
    Action ended 08:34:56: ValidateProductID. Return value 1.
    MSI (c) (68:70) [08:34:56:895]: Doing action: Milestone_DIRCA_TARG947
    Action 08:34:56: Milestone_DIRCA_TARG947.
    Action start 08:34:56: Milestone_DIRCA_TARG947.
    MSI (c) (68:70) [08:34:56:897]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_DIRCA_TARG947'
    MSI (c) (68:70) [08:34:56:897]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'LaunchConditions'. Its new value:
    'DIRCA_TARGETDIR'.
    Action ended 08:34:56: Milestone_DIRCA_TARG947. Return value 1.
    MSI (c) (68:70) [08:34:56:897]: Doing action: DIRCA_TARGETDIR
    Action 08:34:56: DIRCA_TARGETDIR. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: DIRCA_TARGETDIR.
    MSI (c) (68:70) [08:34:56:899]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'DIRCA_TARGETDIR'
    MSI (c) (68:70) [08:34:56:900]: PROPERTY CHANGE: Adding TARGETDIR
    property. Its value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
    Action ended 08:34:56: DIRCA_TARGETDIR. Return value 1.
    MSI (c) (68:70) [08:34:56:900]: Doing action: CostInitialize
    Action 08:34:56: CostInitialize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: CostInitialize.
    MSI (c) (68:70) [08:34:56:901]: Machine policy value 'MaxPatchCacheSize' is
    10
    MSI (c) (68:70) [08:34:56:901]: Baseline: Sorting baselines for {55D13F49-
    FCB8-4892-8266-05D373FCAA61}.
    MSI (c) (68:70) [08:34:56:901]: Baseline: New baseline 2.1.3 from transaction.
    MSI (c) (68:70) [08:34:56:902]: Baseline: Sorted order Native: Order 0.
    MSI (c) (68:70) [08:34:56:902]: Baseline Data Table:
    MSI (c) (68:70) [08:34:56:902]: ProductCode: {55D13F49-FCB8-4892-8266-
    05D373FCAA61} Version: 2.1.3 Attributes: 0 PatchId: Native BaselineId: -
    2147483648 Order: 0
    MSI (c) (68:70) [08:34:56:902]: Baseline File Table:
    MSI (c) (68:70) [08:34:56:912]: PROPERTY CHANGE: Adding ROOTDRIVE
    property. Its value is 'D:\'.
    MSI (c) (68:70) [08:34:56:913]: PROPERTY CHANGE: Adding CostingComplete
    property. Its value is '0'.
    Action ended 08:34:56: CostInitialize. Return value 1.
    MSI (c) (68:70) [08:34:56:914]: Doing action: FileCost
    Action 08:34:56: FileCost. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: FileCost.
    MSI (c) (68:70) [08:34:56:915]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: RemoveFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: MoveFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: Shortcut 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: TypeLib 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: IniFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: ReserveCost 3: -2147287038
    Action ended 08:34:56: FileCost. Return value 1.
    MSI (c) (68:70) [08:34:56:917]: Doing action: IsolateComponents
    Action 08:34:56: IsolateComponents. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: IsolateComponents.
    MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: BindImage 3: -2147287038
    MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: IsolatedComponent 3: -
    2147287038
    MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: Patch 3: -2147287038
    Action ended 08:34:56: IsolateComponents. Return value 1.
    MSI (c) (68:70) [08:34:56:920]: Skipping action: ResumeForm (condition is
    false)
    MSI (c) (68:70) [08:34:56:920]: Skipping action: MaintenanceForm (condition
    is false)
    MSI (c) (68:70) [08:34:56:920]: Doing action: CostFinalize
    Action 08:34:56: CostFinalize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: CostFinalize.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding OutOfDiskSpace
    property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
    OutOfNoRbDiskSpace property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
    PrimaryVolumeSpaceAvailable property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
    PrimaryVolumeSpaceRequired property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:921]: PROPERTY CHANGE: Adding
    PrimaryVolumeSpaceRemaining property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Patch 3: -2147287038
    MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Condition 3: -2147287038
    MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Modifying TARGETDIR
    property. Its current value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
    Its new value: 'C:\Program Files\Microsoft\Microsoft Fix it 50381\'.
    MSI (c) (68:70) [08:34:56:923]: Target path resolution complete. Dumping
    Directory table...
    MSI (c) (68:70) [08:34:56:923]: Note: target paths subject to change (via
    custom actions or browsing)
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: TARGETDIR          , Object: C:
    \Program Files\Microsoft\Microsoft Fix it 50381\
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: WindowsFolder          , Object: C:
    \windows\
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: ProgramMenuFolder          ,
    Object: C:\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
    \Programs\
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: DesktopFolder          , Object: C:
    \Users\Steve\Desktop\
    MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Adding INSTALLLEVEL
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:56:923]: Note: 1: 2262 2: IsolatedComponent 3: -
    2147287038
    MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: BindImage 3: -2147287038
    MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: Patch 3: -2147287038
    MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: RemoveFile 3: -2147287038
    Action ended 08:34:56: CostFinalize. Return value 1.
    MSI (c) (68:70) [08:34:56:925]: Doing action: ProgressForm
    Action 08:34:56: ProgressForm.
    Action start 08:34:56: ProgressForm.
    MSI (c) (68:70) [08:34:56:926]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'ProgressForm'
    MSI (c) (68:6C) [08:34:56:938]: Note: 1: 2262 2: Error 3: -2147287038
    DEBUG: Error 2826:  Control Line1 on dialog ProgressForm extends beyond the
    boundaries of the dialog to the right by 3 pixels
    The installer has encountered an unexpected error installing this package. This
    may indicate a problem with this package. The error code is 2826. The
    arguments are: ProgressForm, Line1, to the right
    MSI (c) (68:6C) [08:34:56:941]: Note: 1: 2262 2: Error 3: -2147287038
    DEBUG: Error 2826:  Control Line2 on dialog ProgressForm extends beyond the
    boundaries of the dialog to the right by 3 pixels
    The installer has encountered an unexpected error installing this package. This
    may indicate a problem with this package. The error code is 2826. The
    arguments are: ProgressForm, Line2, to the right
    MSI (c) (68:6C) [08:34:56:948]: Note: 1: 2262 2: Error 3: -2147287038
    DEBUG: Error 2826:  Control BannerBmp on dialog ProgressForm extends beyond
    the boundaries of the dialog to the right by 3 pixels
    The installer has encountered an unexpected error installing this package. This
    may indicate a problem with this package. The error code is 2826. The
    arguments are: ProgressForm, BannerBmp, to the right
    Action 08:34:56: ProgressForm. Dialog created
    Action ended 08:34:57: ProgressForm. Return value 1.
    MSI (c) (68:70) [08:34:57:011]: Doing action: ExecuteAction
    Action 08:34:57: ExecuteAction. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    MSI (c) (68:6C) [08:34:57:012]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For FinalUIFont textstyle, the system created a 'Arial' font, in 0
    character set, of 15 pixels height.
    Action start 08:34:57: ExecuteAction.
    MSI (c) (68:70) [08:34:57:035]: PROPERTY CHANGE: Adding SECONDSEQUENCE
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:57:043]: Grabbed execution mutex.
    MSI (c) (68:70) [08:34:57:043]: Incrementing counter to disable shutdown.
    Counter after increment: 0
    MSI (c) (68:70) [08:34:57:045]: Switching to server: TARGETDIR="C:\Program
    Files\Microsoft\Microsoft Fix it 50381\" EULAACCEPTED="1"
    CURRENTDIRECTORY="C:\Users\Steve\Downloads" CLIENTUILEVEL="0"
    CLIENTPROCESSID="9576" USERNAME="Steve" SOURCEDIR="C:\Users\Steve
    \Downloads\" ACTION="INSTALL" EXECUTEACTION="INSTALL" ROOTDRIVE="D:\"
    INSTALLLEVEL="1" SECONDSEQUENCE="1"  ADDLOCAL=DefaultFeature 
    MSI (s) (C8:D4) [08:34:57:086]: Running installation inside multi-package
    transaction C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
    MSI (s) (C8:D4) [08:34:57:086]: Grabbed execution mutex.
    MSI (s) (C8:BC) [08:34:57:092]: Resetting cached policy values
    MSI (s) (C8:BC) [08:34:57:092]: Machine policy value 'Debug' is 0
    MSI (s) (C8:BC) [08:34:57:092]: ******* RunEngine:
               ******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
               ******* Action: INSTALL
               ******* CommandLine: **********
    MSI (s) (C8:BC) [08:34:57:096]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (C8:BC) [08:34:57:097]: Setting cached product context: User non-
    assigned for product: 48945AC3B41AEF24F91FE79A10157D52
    MSI (s) (C8:BC) [08:34:57:097]: Using cached product context: User non-
    assigned for product: 48945AC3B41AEF24F91FE79A10157D52
    MSI (s) (C8:BC) [08:34:57:099]: Setting cached product context: User non-
    assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
    MSI (s) (C8:BC) [08:34:57:099]: Using cached product context: User non-
    assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
    MSI (s) (C8:BC) [08:34:57:101]: Setting cached product context: User non-
    assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
    MSI (s) (C8:BC) [08:34:57:101]: Using cached product context: User non-
    assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
    MSI (s) (C8:BC) [08:34:57:103]: Setting cached product context: User non-
    assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
    MSI (s) (C8:BC) [08:34:57:103]: Using cached product context: User non-
    assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
    MSI (s) (C8:BC) [08:34:57:104]: Setting cached product context: User non-
    assigned for product: E2EE924EC67B3554B8404B55780FF01D
    MSI (s) (C8:BC) [08:34:57:104]: Using cached product context: User non-
    assigned for product: E2EE924EC67B3554B8404B55780FF01D
    MSI (s) (C8:BC) [08:34:57:106]: Setting cached product context: machine
    assigned for product: 00002109001001400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:106]: Using cached product context: machine
    assigned for product: 00002109001001400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:107]: Setting cached product context: machine
    assigned for product: 00002109001031400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:108]: Using cached product context: machine
    assigned for product: 00002109001031400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:110]: Setting cached product context: machine
    assigned for product: 00002109001070400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:110]: Using cached product context: machine
    assigned for product: 00002109001070400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:111]: Setting cached product context: machine
    assigned for product: 000021090010C0400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:111]: Using cached product context: machine

    Hi Chris,
    The AIR installation log is in my original post - about 12 paras down but here is is:
    [2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:06:53:46] Commandline is:
    [2013-04-25:06:53:46] No installed runtime detected
    [2013-04-25:06:53:57] Relaunching with elevation
    [2013-04-25:06:53:57] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
    [2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
    [2013-04-25:06:54:02] No installed runtime detected
    [2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:54:10] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi
    [2013-04-25:06:54:10] Rollback complete
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Runtime Installer end with exit code 7
    [2013-04-25:06:54:20] Runtime Installer end with exit code 7
    [2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:06:55:38] Commandline is:
    [2013-04-25:06:55:38] No installed runtime detected
    [2013-04-25:06:55:45] Relaunching with elevation
    [2013-04-25:06:55:45] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
    [2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
    [2013-04-25:06:55:48] No installed runtime detected
    [2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:55:55] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi
    [2013-04-25:06:55:55] Rollback complete
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Runtime Installer end with exit code 7
    [2013-04-25:06:55:59] Runtime Installer end with exit code 7
    [2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:05:12] Commandline is:
    [2013-04-25:07:05:12] No installed runtime detected
    [2013-04-25:07:05:18] Relaunching with elevation
    [2013-04-25:07:05:18] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
    [2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
    [2013-04-25:07:05:24] No installed runtime detected
    [2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:05:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local\temp\air953.tmp\setup.msi
    [2013-04-25:07:05:29] Rollback complete
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Runtime Installer end with exit code 7
    [2013-04-25:07:05:31] Runtime Installer end with exit code 7
    [2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:07:06:12] Commandline is:
    [2013-04-25:07:06:12] No installed runtime detected
    [2013-04-25:07:06:21] Relaunching with elevation
    [2013-04-25:07:06:22] Launching subprocess with commandline c:\users\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
    [2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
    [2013-04-25:07:06:32] No installed runtime detected
    [2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi
    [2013-04-25:07:06:37] Rollback complete
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Runtime Installer end with exit code 7
    [2013-04-25:07:06:40] Runtime Installer end with exit code 7
    [2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:07:26:15] Commandline is:
    [2013-04-25:07:26:15] No installed runtime detected
    [2013-04-25:07:26:28] Relaunching with elevation
    [2013-04-25:07:26:28] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
    [2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
    [2013-04-25:07:26:37] No installed runtime detected
    [2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:26:48] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi
    [2013-04-25:07:26:48] Rollback complete
    [2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:26:48] Runtime Installer end with exit code 7
    [2013-04-25:07:46:09] Runtime Installer end with exit code 7

  • Looking for a site that shows problems with windows patches or updates.

    Looking for a site that shows problems with windows patches or updates...so I know what not to install.
    Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
    that does it with expertise.
    Which forums would be best to look for such problems.
    Thanks in and advance for suggestions

    Hi,
    I agreed with Cyber and Rick.
    Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
    Although there might be some problems when installing it, Windows update is not the one to blame.
    For troubleshooting Windows updates, if needed:
    Fix Microsoft Windows Update Issues
    http://support2.microsoft.com/gp/windows-update-issues
    Best regards
    Michael Shao
    TechNet Community Support

  • Unable to deploy BPEL Process --  Says If you have installed a patch to the

    I have a simple BPEL process that calles an ESB flow deployed in the same server.
    I am facing the following issue when trying to deploy the BPEL process.
    The ESB flow is deployed and is working perfectly.
    Configuration:
    JDeveloper 10.1.3.5
    SOA Suite 10g Release 3
    Downloaded from:
    http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
    Here I downloaded this file:
    http://download.oracle.com/otn/nt/ias/101310/soa_windows_x86_101310_disk1.zip
    When I compile the BPEL project, it compiles fine:
    Compiling...
    Compiling C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\bpel\OrderDistributionProcess.bpel
    *[BPEL Compiler] Initializing compiler for first time use...*
    BPEL suitcase generated in: C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\output\bpel_OrderDistributionProcess_v2011_09_01__39889.jar
    copying bpel/OrderDistributionProcess.wsdl to output directory
    copying bpel/OrderSystem_OrderSearchService_RSRef.wsdl to output directory
    converting, through native2ascii, build.properties to output directory
    *[11:05:04 AM] Successful compilation: 0 errors, 0 warnings.*
    Now when I choose (Right Click on Project) -> Deploy -> BPEL Process Deployer,
    I get this error:
    Buildfile: C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\build.xml
    [java] Java Result: 1
    validateTask:
    [echo]
    | Validating workflow
    [validateTask] Validation of workflow task definitions is completed without errors
    deployProcess:
    [echo]
    | Deploying bpel process OrderDistributionProcess on localhost, port 8888
    [deployProcess] Deploying process C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\output\bpel_OrderDistributionProcess_1.0.jar
    BUILD FAILED
    C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\build.xml:78: A problem occured while connecting to server "localhost" using port "8888": bpel_OrderDistributionProcess_1.0.jar failed to deploy. Exception message is:  ORABPEL-05215
    Error while loading process.
    The process domain encountered the following errors while loading the process "OrderDistributionProcess" (revision "1.0"): null.
    If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
    at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:804)
    at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
    at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
    at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
    at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
    at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
    at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
    at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
    at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
    at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    Total time: 6 seconds
    I checked the host port, i.e., 8888 here, from JDeveloper; and it says that the tests passed.
    Help me please.

    Balu,
    it seems you are trying to deploy example for B2B. Please check your B2B is up, AQ are up and accessible and you can also check your SOA dehydration DB .
    You can check some setup and dexample at: http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TU_001_B2B_BPEL.pdf
    -JMehta

Maybe you are looking for