Problem:Installing Developer server 6

Hi,
I have installed NT4 with service pack6, Oracle Enterprise 8.0.5, OAS 4.0.7.
And i stop all oracle services.
Mem:128M, 330MHz processor.
The problem is:
When I installing developer server 6, it is automatically logout of the installion. So there are nothing to be installed.
Thanks in advance..

check if your oracle 805 and developer 6i is y2k. it seems that developer 6i will auto-log out if the db is not y2k. i've experienced this similar situation with 805 and i had to roll-back the OS date to go through with the installation. hope this helps!

Similar Messages

Problem Installing Developer Suite on WIndows Vista

Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

Which developer suite are you using???

Problem Installing SQL Server 2012

Hello, I am currently trying to install SQL Server 2012 and I'm having a problem. When I try to install a "New SQL Server stand alone installation..." from the SQL Server Installation Center, it gives me the error:
An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version=8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchit
ecture="x86",type"win32". Please refer to Help and Support for more information. HRESULT:
0x80070422.
After clicking "OK" I get this error:
Windows Installer file: C:\Users\Mike\AppData\Local\Temp\SQL Server 2012
\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20131207_210515\SqlSupport_Cpu64_1_ComponentUpdate.log
After clicking "Retry" it loads for awhile and then shuts down and I get the "Setup Stopped Working" window. Does anyone know what the problem is? How can I finish installing the software? Thanks

Hello,
Please try to manually install VC++ 2005 SP1 from the following link.
http://www.microsoft.com/en-us/download/details.aspx?id=5638
The following resources may help you too:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/a508768d-9468-41e0-9159-b66b45c39043/microsoft-visual-c-2005-redistributable-error?forum=vssetup
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1935an-error-occurred-during-the/7105ee7e-ab45-4bd2-b5db-a3e9002f7f9e?auth=1
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

PVM Installation Problem (install report server)

Hi,
i am trying to install PVM 1.0.2 , but i have the following error:
Installing Report Server:
ERROR: Failed to install report server as user pvmadm. Please check OS
user configuration then try again.
I add pvmadm to root group,except dba group, but i have the same problem.
Any ideas ?
TIA

Hello,
The installation of a Reports Server as a "Windows Service" is no more possible in Oracle Reports 10g R2 :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm#i1005629
Start the reports server with the command :
rwsrver server=<server_name> batch=yes
or use opmn to manage the reports server .
Regards

Problems installing Project Server 2013 SP1

Hi,
I have an issue installing Project Server SP1 (KB2880553). The history of this installation is as follows below:
I have one App Server and one Web Server (test environment)
On February I installed the mistaken SharePoint 2013 SP1, Project Server SP1 and Language Pack SP1 in both servers, followed by SharePoint Config Wizard. No problem here, other than the mistaken SP1's
The current week I've installed SharePoint SP1 (KB2880552) in both servers, followed by SharePoint Config Wizard. No problem here.
Then I installed Project Server SP1 (KB2880553) in both servers, it got installed in both servers apparently, but when I run the SharePoint Config Wizard in the APP server I get the error below and I can't continue:
If I try to install Project Server SP1 in the Web Server it tells me that the product is alteady installed there, if I try to install the Language Pack SP1 KB2880554, it tells me that there is nothing to be installed in that Web server.
If I check the Patch Status in Central Admin, this is what I get regarding the Web server, the APP server is apparently ok:
So the problem is that I can do nothing, as it doesn't allow me to install anything anywhere.
Please, do you know what to do in this case?
Thank you for your help and regards,
José Espases

Hi,
thank you for your answer.
Maicco, I've already tried to follow the links but as I said initially there is nothing that I can install, as you can see in the second picture that I sent before, the KB2880553 is installed partially (last line) but missing/required in other lines, so
when I try to install it again it keeps saying that it has been already installed, but when I execute the Config Wizard it says that it is missing and required.
The Uninstallation/installation is what I try to avoid.
Raymundo, regarding the post http://www.maadarani.com/Blog/Lists/Posts/Post.aspx?ID=12&mobile=0 it
doesn't work, probably something is missing in the link, please, can you send it again?
Thank you and regards,
José Espases

Problem installing weblogic server 7.0 in Mandrake Linux 10.1

hi
i am very new to Mandrake Linux ..i have installed Mandrake Linux 10.1 in my machine ...the problem is that when i try i to install weblogic server 7.0 it gives some error
** Error during execution, error code = 11
my machine spec
* 512MB RAM
* 40GB HDD
* P4 2.8GHZ
can any one help me..
the weblogic server i downloaded from bea site its version is weblogic server 7.0 with jrockit (sp6)
regards
babu

Hi,
first of all, unfortunately, WebLogic Server is not supported under Mandrivia (use the right name ;-) ), so you should use Novell Suse or Redhat AS, check this list
Anyway, error code 11 should be related to permission issues, so you should check that the user you are using is allowed to write under the installation directory and under /var/log/
Could you kindly post the log messages?
Regards.
Antenore Gatta
Middleware Specialist
Hequa S.r.l
C.so Buenos Aires 77
20124 Milano
http://www.Hequa.it
Tel +39(0)267493078
Fax +39(0)267493079
Mobile +39 3481537897
______________________________________

Problem installing weblogic server 8.11

I have a problem while installing weblogic server 8.11 on a solaris 9 machine.
I use the following instruction: ./filename.bin and I see the following message:
Illegal instruction (memory dumped)
(in french: instruction incorrecte (vidage memoire))
A core file is generated but it doesn't help resolving this problem. It seems
to be talking about unzip, as I found things like this message in this file:
error: cannot allocate unzip buffers
unzipsfx: cannot find myself! [%s]
error [%s]: missing %ld bytes in zipfile
I also tryed to install weblogic server 8.10 and no core file is generated but
I have the following message:
error [export/home/tleberre/net_server810_solaris32.bin]: missing 570 byes in
zipfile
(attempting to process anyway)
** Error during init, error code = 2.
I first thought the file I downloaded was incomplete, so I downloaded it again
but I still have the same problem. Can anyone help me? What have I forgotten to
do?
Thank you
Tanguy Le Berre

"Tanguy" == Tanguy Le Berre <[email protected]> writes:
Tanguy> I have a problem while installing weblogic server 8.11 on a solaris 9 machine.
Tanguy> I use the following instruction: ./filename.bin and I see the following message:
Tanguy> Illegal instruction (memory dumped)
Tanguy> (in french: instruction incorrecte (vidage memoire))
Tanguy> A core file is generated but it doesn't help resolving this problem. It seems
Tanguy> to be talking about unzip, as I found things like this message in this file:
Tanguy> error: cannot allocate unzip buffers
Tanguy> unzipsfx: cannot find myself! [%s]
Tanguy> error [%s]: missing %ld bytes in zipfile
Tanguy> I also tryed to install weblogic server 8.10 and no core file is generated but
Tanguy> I have the following message:
Tanguy> error [export/home/tleberre/net_server810_solaris32.bin]: missing 570 byes in
Tanguy> zipfile
Tanguy> (attempting to process anyway)
Tanguy> ** Error during init, error code = 2.
Tanguy> I first thought the file I downloaded was incomplete, so I downloaded it again
Tanguy> but I still have the same problem. Can anyone help me? What have I forgotten to
Tanguy> do?
Well, perhaps one thing you've forgotten is that it's better to write notes
about particular problems in the newsgroup or mailing list that is most
appropriate to the problem. If people who read this newsgroup only know about
the webserver, then they won't have any idea how to help you with installation
problems with WebLogic server, which this clearly is (the "webserver" is not
"WebLogic Server", but only part of the entire package).
Have you made an attempt to contact BEA support? It seems likely that your zip
file is corrupt.
===================================================================
David M. Karr ; Java/J2EE/XML/Unix/C++
[email protected] ; SCJP; SCWCD; SCBCD

Problem Installing SQL Server 2012 Express

Hello
I'm in the process of installing SQL Server 2012 and the install is continually failing. It reports to possibly be a problem with the package; I've tried downloading three times now and setup has failed each time. There is a link below to the install log
file which I believe will likely be more help than my attempting to describe the symptoms but please let me know if there is any additional information which would help in finding the problem.
https://skydrive.live.com/redir?resid=9ACB131B26E0E088!514&authkey=!ABuTadbr92UTFpo
Thanks in advance.

Hello,
“Error Code: 29559
The installer has encountered an unexpected error installing this package. This may indicate a problem with the package. The error code is 29559”
Let’s try to work around the issue on a different way. Please try to download the following Evaluation Copy of SQL Server 2012, run setup, and on the “Product Key” page select
Express Edition (on the “Specify a free edition” combo box).
http://www.microsoft.com/en-us/download/details.aspx?id=29066
Do you have another instance of SQL Server installed?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Problems installing SQL Server 2014 Dev on Windows 7 64 bit

I just purchases Microsoft SQL Server 2014 Dev edition from the Microsoft store, downloaded the 64bit version, and tried to install it. The install fails consistently on the Install File Setup (after the product code and accepting the license) with
the following error:
The following error has occurred:
Unable to open Windows Installer file 'D:\SQL2014Dev\Sqldev_eng_mar14\redist\VisualStudioShell\VC10SP1\x86\vc_red.msi'.
Windows Installer error message: 1: 2203 2: D:\SQL2014Dev\Sqldev_eng_mar14\redist\VisualStudioShell\VC10SP1\x86\vc_red.msi 3: -2147286960 .
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
My system is running Windows 7 Home Premium x64, which looks like it's supported for this product.
Does anyone have any suggestions?

Hi
Please make sure firewall is turned off when you are installing SQL Server. Also make sure you are not installing from CD drive, install it from Local Drive.
For such issues MS has released support article to fix any missing installer. You can refer to below support article
https://support.microsoft.com/kb/969052?wa=wsignin1.0
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Problems installing Leopard Server on Xserve

I have an Xserve with no monitor or keyboard access. I need to install Leopard server upgrade, I read the instructions on-line and in the booklet that comes with the software. Obviously, I cannot press C upon boot since I cant see the monitor nor can I see if I need to update my bios.
I tried enabling Remote Desktop using the kickstart command, but whenever use Chicken of the VNC to connect it says it cant find the server.
I used the "Server Assistant" and it tells me the same thing "Cant find server" but i can ping it and log into it using terminal. I can also run all the other applications like "Server Monitor", "Server Admin", and "Workgroup Manager" just fine.
The server is in another segment because it is in our server room I used one of the server room connection and still cant find server.
Can someone please help getting Leopard installed on this Xserve?
Thanks

The general answer is yes. But the conditional answer is that you must have the original installation media from the Xserve model before it started shipping Snow Leopard exclusively. This means you would need to have bought an Xserve as recently as December to have the combo OS pack as I believe Apple stopped shipping Leopard around early January (although that might be on BTO models so if you got one from the channel it may still have the original media kit). You need to be mindful of the machine's Boot ROM version. The change of one digit can cause some issues with older installation media.
If you don't have recent media kits, you "should" be able to construct a functional OS by building on other hardware and patching up to 10.5.8. Then cloning it to the new unit.
And, you've peaked my interest. What specific issue have you had with 10.6 and Xsan?
Hope this helps

Problems installing RoboHelp Server 7

I'm a newbie to RoboHelp and I'm trying to install RoboHelp
Server 7 on a Windows Server 2003 R2 Standard x64 Edition box. It's
running IIS 6.0 which is working without issue. However, when I try
to install RoboHelp Server 7, I get the following error:
Microsoft Internet Informations Services (IIS) is not
currently installed. Please install MS-IIS 5.0 or later before
installing RoboHelp Server. Setup is terminating now.
*ANY* help that *ANY* one could provide would be so greatly
appreciated!!!!!
Thanks
Rich

I can, but I don't think that's the answer. I'm actually
trying to install this on a VM and having issues. Just on a whim, I
tried to install it on the actually machine (not the VM) and had
the exact same issue. I'm suspecting that I have some IIS
configuration or file/foldedr permission issue that's causing the
error and the error message is ultimately misleading.
Thanks for your response!! If you have any other idea at all,
I'd love to hear them!!!!!
Rich

Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"

Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
Sven

Would you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.

Problems installing Development Suite Patch 10.1.2.3.0 on Windows 7 (32-bit)

Hi all,
I'm trying to install Oracle Development Suite 10.1.2.3.0 on Windows 7 (Service Pack 1 with fairly current Windows Updates) according to Metalink Document 1292919.1.
Everything work just find until I try to install the 10.1.2.3.0 Patchset (Patch Number 5983622) as outlined in Step 5 of the aforementioned Document.
During the step labelled "Copying files for 'Oracle Universal Installer 10.1.0.6.0" I get the following error message twice:
"javaw.exe Entry Point Not Found"
"The procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL".
I acknowledged both of these messages and rest of the installation process runs fine.
I'm not not sure about what to make of these messages, will my installation work correctly or will I have to cope with further issues related to this?
My search on Metalink did not turn up any results related to the Development Suite. I already checked if there were multiple versions of psapi.dll were present on the system as mentionned in Documents regarding this problem while installing Oracle client 10.1.0.5.0 but there is only one.
Any help is apreciated!
Chris

Hi Chris,
Answer to the question is provided on threads:
Install errors - Entry point not located in PSAPI.dll; Package load failure
PSAPI.DLL installation error
Hope this answers your question
Thanks &
Best Regards,

Problem installing SQL server 2014 Express Edition on Windows 8 32 bit

Installation stops at a certain point and do not progress any further.
Here i am attaching an image for the scenario.

Hello Sir,
Actually there is no error while installing that, at this point progress of installation stops.
But now I installed the LocalDb Component of sql server 2014 stand alone.
And trying to install management studio using "SQLManagementStudio_x86_ENU_2.exe" .
But same problem no progress in installation after a certain point.
Following is the content of Summary.txt.
Overall summary:
Final result: User cancelled
Exit code (Decimal): -2068380094
Exit facility code: 1207
Exit error code: 1602
Exit message: User has cancelled.
Start time: 2014-06-01 21:26:31
End time: 2014-06-01 21:26:41
Requested action: Install
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: F:\Softwares\Sql Server\Sql Server 2014 Express\SQLEXPRADV_x86_ENU\x86\setup\
Installation edition: Express
Product Update Status:
Failure to check for updates.
Error message:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException
Message:
SQL Server setup failed to search for product updates. This may indicate that the Windows Update service does not have online access to the Microsoft Update server or Windows Server Update Services.
HResult : 0x85190003
FacilityCode : 1305 (519)
ErrorCode : 3 (0003)
Data:
SQL.Setup.FailureCategory = ActionFailure
Stack:
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
Inner exception type: Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSearchException
Message:
SQL Server setup failed to search for product updates. This may indicate that the Windows Update service does not have online access to the Microsoft Update server or Windows Server Update Services.
HResult : 0x85190003
FacilityCode : 1305 (519)
ErrorCode : 3 (0003)
Data:
WatsonData = Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSearchException@3
Stack:
at Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSearchUtility.TrySearch(String serviceId, String query)
at Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSearchEngine.Search(String serviceId, String query)
at Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSetupSearchEngine.SearchUpdates()
at Microsoft.SqlServer.Configuration.SmartSetupExtension.SearchUpdatesAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
Inner exception type: Microsoft.SqlServer.Configuration.SmartSetupExtension.WuaUpdateSearchException
Message:
Failed to search for updates with query 'CategoryIDs contains '892C0584-8B03-428f-9A74-224FCD6887C0''. Error: Exception from HRESULT: 0x8024001F
HResult : 0x85170004
FacilityCode : 1303 (517)
ErrorCode : 4 (0004)
Data:
Query = CategoryIDs contains '892C0584-8B03-428f-9A74-224FCD6887C0'
ErrorMessage = Exception from HRESULT: 0x8024001F
WatsonData = Microsoft.SqlServer.Configuration.SmartSetupExtension.WuaUpdateSearchException@4
Stack:
at Microsoft.SqlServer.Configuration.SmartSetupExtension.WuaUpdateSearcher.Search(Int32 timeout, String criteria)
at Microsoft.SqlServer.Configuration.SmartSetupExtension.MuSearchUtility.Search(String serviceId, String query)
Inner exception type: System.Runtime.InteropServices.COMException
Message:
Exception from HRESULT: 0x8024001F
HResult : 0x8024001f
Stack:
at Microsoft.SqlServer.Interop.WUApiLib.IUpdateSearcher.EndSearch(ISearchJob searchJob)
at Microsoft.SqlServer.Configuration.SmartSetupExtension.WuaUpdateSearcher.Search(Int32 timeout, String criteria)
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: true
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\120\Setup Bootstrap\Log\20140601_212620\ConfigurationFile.ini
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
Message:
User has cancelled.
HResult : 0x84b70642
FacilityCode : 1207 (4b7)
ErrorCode : 1602 (0642)
Stack:
at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)

Problem installing formsReports server after HTTP Only install

Hi all,
Well I have finally got the http only install to run and work correclty but when I go back to install the Forms / Reports server I get an error:
"Specified key was not found while trying to GetValue"
I hit the Retry button but no success. If I do an Enterprise install, Forms / Reports get installed. Is this a bug or a know problem with a work around?

I forgot to mention that I am using Widows 2000 and Oracle9iAS 1.0.2. I could manually install forms and reports server however, I am looking to see if can be fixed to work correclty through the 9ias installer. That way I don't have to go in and edit the httpd.conf files for /dev60html etc.. For some reason the HTTP only installation isn't putting in a proper registry key but if you do a Enterprise Install the key is being inserted. I have formated the disk and installed 2000 and then installed 9ais so I know it isn't a correpted system.
Thanks for any help you can offer.

Problem:Installing Developer server 6

Similar Messages

Maybe you are looking for