Problem installing DivX codec on Nokia 500

I have a nokia 500. I'm trying to install DivX codec to play HD Video files. But when I install DivX player, I can't go to main menu. The main menu turns down.
Have anyone tried installing DivX codec or any other codec on nokia 500 to play HD Videos? Please help me. Please tell me which codec or player is fully supported by Nokia 500. I've searched a lot about players and codecs on nokia 500. But nothing found.
I need to play High Quality AVI, MP4, MPG and FLV files. Please suggest me any player that supported by nokia 500.
By the way, I'm using the latest Belle Refresh(111.021.0028) on my nokia 500.
Thanks in advance.

There is no graphics chip upon 500 which is responsible for such problems.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Elements problem after divx codec install

    hi all,
    I am having an interresting problem and I am hoping someone can give me some advice.
    I have been running Premiere Elements 8 for a while and a it has been working fine. a few days ago I tried to install the divx codec. Now I open Premiere Elements and it will open, load my project, then minimize and I can not get it to restore.
    I have uninstalled divx but no luck.
    I also did a windows system restore to a previous state but had no luck there either.
    I am running Windows 7 64 Bit.
    on a quad core Intel Q6700 processor
    intel motherboard
    8 GB of Ram
    ATI FirePro V4800 (FireGL) Video card
    dual monitor.
    I am suspecting the codec updated a driver somewhere  that is causing a conflict.
    I had similar problems with Photoshop elements 8 and had to disable my twain drivers to get it to work.
    any comments or suggestions would be appreciated.
    thanks;

    Welcome to the forum.
    I have used the DivX CODEC, plus the DivX Pro Encoder for years, with zero issues, until the most recent update of DivX with both its CODEC and its player. Did not update the DivX Pro Encoder.
    First, these problems have not affected PrE 4.0, running on XP-Pro SP3, so there ARE many differences to your setup. With those differences, I am not at all sure that my observations will apply to your installation and your system.
    The only problem that I encountered was that the DivX player seized the File Type Associations for all AVI's, so that Dbl-clicking on any, would always Open them in the DivX player. The new one is filled with ads for all sorts of things, and reminds me of the old RealPlayer from years ago. Also, those ad often lead to a dead-end, from which the only recourse is to buy whatever the ad features, or go to Task Manager and Kill the process - really, really bad move DivX. All it took was going to Control Panel>Folder Options>File Type and changing the AVI associations back to my desired player, MediaPlayer Classic HC. Fixed.
    That was my only issue with any version of the DivX CODEC, or the DivX player. Still, I made note of it.
    That does not mean that on your system, and with PrE 8, something in there might not have broken.
    I would check the file associations in Control Panel, and reset any, that DivX Player might have changed, then test.
    While you are at it, also update both your video driver and your audio driver, from their mfgr. Web site.
    Good luck, and maybe others will have tips or suggestions.
    Hunt

  • After installing divX codec, QT won't play divX .avis

    Environment:
    Windows XP pro
    QT pro 7.1.3
    DivX 6.5
    I hate windows media player, and always play my media in QT if I can. When I tried to play some avis in QT that were encoded with DivX, the QT dialog box came up and directed me to the apple site which had the divx link. It stated there that the codec will work for QT, on both mac and windows. However, after I download and install the codec, the only thing I see in my player is a black screen with no audio. (And I think that before I installed the codec, I at least got the audio.) But now I get nothing.
    Anyone have any ideas?

    http://www.headbands.com/gspot/
    http://www.apple.com/quicktime/resources/components.html
    http://support.divx.com/cgi-bin/divx.cfg/php/enduser/stdadp.php?p_faqid=191&p_created=1060820952&p_sid=wYFURKui&p_accessibility=0&p_redi rect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MzcyJn BfcHJvZHM9MCZwX2NhdHM9JnBfcHY9JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbm wmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1RdWlja1RpbWUgUGxheWVy&p_li=&ptopview=1

  • Problems with Divx Codecs

    Hi,
    I've got an iMac G5. It has an PowerPc CPU and I don'T know how to install the new Divx player (or other programms) all of them run only on intel macs. I installed an old Divx player, but it alwys crashes when i try to play an avi/divx movie on the internet.
    What had I best do ?
    Vinzenz

    Welcome to the forums!
    Start by updating to 10.5.8 (use the combo updater via direct download) and make sure that both Quicktime and Safari are also up to date, then install:
    Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs. In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/

  • I have problem installing whatsapp to my nokia e71...

    In this last few days, I got a message to reinstall whatsapp mesenger with a newest version. after trying few times, always fail. Anybody can assist???? 

    make sure the application is not limited to, note the date settings are correct. download from your mobile phone browser http://m.whatsapp.com/download.
    from my experience with set backward one year backward from the date settings you can try.
    hopefully can help you

  • WHEN I PRESS NAVIGTOR ON MY NOKIA 500 IS NOT WORKI...

    PLEASE I NEED SOMEBODY TO HELP ME TO INSTALL SOFTWARE TO MY NOKIA 500 STEP BY STEP FROM GET GO ?
    Solved!
    Go to Solution.

    Go back to the support page for this device. It will give you all the info needed for updating. It has a link for downloading software to your PC. Once this is done, the software is used to check your gps and see what version of firmware is loaded, and will compare it to the latest version. It will then allow you to download and install the latest on your gps.
    http://www.nokiausa.com/A41435104
    at the bottom of the page, you'll see the link allowing you to download the update wizard.
    Message Edited by quattrog on 23-Dec-2008 04:07 PM

  • Nokia 500 Wi-Fi with problems (and other issues)

    Hi there.
    I had my Nokia 500 yesterday, but it seems to have several problems regarding wireless LAN. I usualy disable 3G traffic (WAP, GPRS, UMTS), so that my service provider doesn't charge me, and only enable with when necessary. But I want the phone to connect to known Wi-Fi networks when avaialable. However:
    1 - When I enable "Only WLAN" in my country, several phone applications constantly annoy me about "no avaialable connection", even when its connected to a Wi-Fi LAN!
    2 - Its constantly searching for wireless networks, and the Wi-Fi connection is intermitent. It fails and then it comes up all the time. I could not finish the download of a GPS map because the Wi-Fi would fail before the download could finish. And it only had 1 known Wi-Fi network avaialable.
    3 - So I set it to use only WLAN, I set  "WLAN energy saving" to off, "search networks" to "once in 30 minutes" (and not automatically), and Manual selecion of WLAN. Even like this, the WLAN connection sometimes fails, and then comes back!
    Also, I cannot install software directly from OVI Store using WLAN (error downloading), and the phone crashed several times while recognizing and focusing a face using the camara.
    I am trully disapointed with the phone. Does anyone have a solution for these problems?
    Thanks.

    You may want to check your battery and battery contacts. Make sure that a Centro battery has not been installed in this device as it is slightly smaller and will not maintain pressure on the battery contacts.
    You can try placing a piece or 2 of paper behind the battery to make to contacts tighter. A loose battery can cause most of the issue you are describing. 

  • Nokia 500 display light and texting problems with ...

    After installing Belle I have some VERY annoying problems with my Nokia 500.
    While texting it turns the display light up and down.
    When I write fx a name and press # to use a big letter, it doesn't automatically go back to small letters after writing the first letter. I have to press # again.
    I have never had this problem before Belle, with any phone.
    Its really annoying and timeconsuming having to delete what I just wrote coz it has continued to write in big letters.
    Also after Belle, when browsing the text with > and < it doesn't highligt a whole word, so i can change it. If for some reason I accidently delete the last letter in a word, I have to delete the whole word and write it again. Never had that problem before either.
    Have I done something wrong to get these annoying problems, or do others also have these problems?
    Is there a fix for Belle coming up?
    And why on earth put out software with so many problems...? I wish I had never "upgraded" to Belle!!
    Hope this is not to confusing, and that someone has a fix for this.
    B.

    i believe there is an option in the Messaging options to actually turn off word prediction, so that it is off by default every time you start up the Messaging app. i also think that instead of navigating it with the > and <, you can actually tap the word on screen and it will highlight that word for you.
    as for the display issue, not so sure. have you checked via Nokia Suite that you have the latest firmware installed for your device? if so, then try re-installing your current firmware thru Nokia Suite.
    Symbian is in maintenance mode, therefore will no longer see any more major firmware updates, only perhaps the odd bug fix or two.

  • WLAN Nokia 500 Connictivity problem Netgear WGR614

    Hi all
    I have installed the Router "Netgear WGR614" and i connected it to 3 systems and one of them is a Wireless Laptop, when i am able to browsing through laptop then why i am unable to browse through my Nokia 500 Phone?
    I have also given the Password but it is keep on saying "Connection failed" why?
    thank you.
    Reddy.

    Check all your apps which connect to the internet, one of these may be set to bypass the local settings and connect direct to your GPRS.
    Other option is to restore factory settings and then re-instal your apps making sure that you check the connection settings for each.
    If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
    Don't forget if your problem is solved to press the "Accept as Solution" button.

  • Nokia 500 - GPRS problem after updating to Nokia B...

    Last month after the announcement of update of Nokia Belle to Nokia 500, I have updated the firmware.  And it was successfull and it works fine.
    But while try to browse the internet in mobile using WAP or Mobile data, I could not do so.  There is a problem (Error in opening the page).  Before i.e. while using Anna i regularly browsed and it worked fine.  after updation only this problem arises.  I have checked all the settings and all is looking correct but could not bowsing.
    Pls help me.

    Hi somebodyx87,
    Could you please follow these steps if problem will occur again?
    1. Disconnect your phone from PC if connected.
    2. Open Control Panel and go to ‘Programs and Features’
    3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
    4. Click on the ‘Change’ button on top toolbar.
    5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
    6. Restart the computer if prompted.
    7. Now connect your phone to the PC. Driver installation should complete and Nokia Suite (hopefully) should detect your mobile properly now.
    I hope it helps!
    Cheers,
    Marina
    Nokia Suite team
    Click on the Star Icon below if my advice has helped you!

  • Nokia 500 wi-fi problem

    Hi all. My Nokia 500 can't find any wi-fi connection after Belle upgrade. It won't pass the "searching wi-fi network" message. Really don't know what to do since it should be a simple task. Any ideas?

    Hi weblira
    Welcome to Nokia forum! 
    Try doing a factory reset on your phone. Go to Menu > Settings > Phone > Phone management > Factory settings > Restore, if it will ask for a lock code use 12345 unless changed.
    After the factory reset try to connect to WLAN again. If that will not help you to resolve the issue use Nokia Suite to re-install the software of your phone.
    If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

  • Unable to install New Social 1.6.32 on Nokia 500 B...

    I tried updating my mobile software today and saw that there were two updates available through the Nokia Suite (3.5.34). One was the Calendar update (which updated sucessfully) and the other was the new Social App 1.6.32 . I am having problems installing the latter one. Every time I try updating the Social app it shows the same message on the suite - The update was not completed. Can anyone help me with this problem? How can I update the Social app on my mobile?

    Hi Lumi,
    Belle Feature Pack 2 is apparently the last major firmware update for Symbian phones along with the Belle Refresh for older Symbian^3 devices. From the looks of things, where application updates contained within Belle Refresh were pushed to devices that have not yet received Belle Refresh (or who will not receive it), support for Symbian is slowing down. From here on in, no major new features or firmware updates are to be expected, perhaps a few application updates and bug fixes. But nothing major like adding features such as the slide-to-unlock that is on FP2 devices.

  • Nokia 500 Problem with Tracking mode and touch sc...

    Hi,
    I just bought Nokia 500 and I am having lot of problem
    1. When I use navigator..it should be in tracking mode not in browing mode so I can see where i am going on where is the turn. But as soon as it calculate the route, withing few second it automatically comes in browsing mode. Even if I press back arrow on left bottom corner it again shows browsing mode. However, sometime it's working fine and always display tracking mode. I am not sure how to switch between the mode. As per manual, I need to hit the back arrow left bottom corner but that does not work for me.
    2. The second problem is really bad. The touchscreen response is slow. It looks like the processor is slow. Particularly if I go to Setup menu..it automatically goes to system. I just touch Setup on main menu and sometimes it automatically goes into system. If I manually go to system..it automatically goes to About ..menu. It just behaves randomly..I have done screen calibration many times. but still issue is there. Also, when I got to keyboard to enter address..it automatially press Q key. Not sure what's wrong here
    Anybody please suggest me what's wrong. Do I need to replace it with nokia?

    Hi
    Night mode is designed to work without flash. So either use flash or night mode, but not both.
    Cheers
    Gryff
    ------ N78 -------

  • Nokia 500 Touch problem

    I had just brought Nokia 500 and after 2 or 3 days i updated it to Symbia Belle my touch has become crazy.
    Many times it happenes that when I am using the phone  different application like contact, web etc starts opening automitacally and when I try to to cancel it, the touch doesn't work for me. 
    please help me out of this problem. I think this is because of Symbian BELLE.
    Can someone suggest me how to go back to ANNA.....

    See the sticky here: /t5/Nseries-and-Symbian-Smartphones/Nokia-500-New-​phone-Touch-gone-crazy-aftter-belle-update/td-p/13​...
    If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
    Don't forget if your problem is solved to press the "Accept as Solution" button.

  • Nokia 500 Gallery problem.

    hi. On my NOKIA 500 whn i go 2 files every sub file is not shown bt memory shows tht there is smethng in my memories. If i open files using adobe i can access everythng in my memories. Wht may be th problem. Also my captured pics only appear in gallery for jst a few hours then dissapear 4rm gallery at ar still in 4ne. ???????? Pliz help help help
    Moderator's note: We have amended the title of this post as it was moved from another thread.

    Are you using any task killing Applications? Or you updated ur Software with recent updates?if you are updated with recent Software and closes the processes that are running behind then the gallery wont visible and the Pictures wont be shown When clicked.just off and on ur mobile dont Kill any processes.

Maybe you are looking for

  • I keep getting the error message Bridge encoutner oerpation error, option is to purge teh cache by

    I have purged teh centra Cache in teh Cache Preferece to correct the proble; have also done the cotrol/alt/shift before opening the program and answering yes, but this has not fixed the issue. I have CS5; is any one else having the same issue and hav

  • LogicPro 8 "Error while trying to synchronize Audio and MIDI"

    Hello, My rig: Dual 2.5 GHz PowerPC G5 3.5 GB DDR SDRAM. OS X 10.4.11. Logic Pro 8.0.2, Motu 828mkII interface, emagic Unitor 8 midi interface, Makie Control Universal, 7200rpm Firewire 800 Hard drives. I Just launched a Logic Pro 8 session that was

  • TIFF files in LR Mobile

      I'm using a camera app called "Pure" on my iPad to take photos for fun.  They are saved as "dRaw/TIFF" files.    They don't show up in the "Camera" folder in LR Mobile - even after activation of the import dialogues.   How can I get these files int

  • One dump file inport into multiple schema

    Hi, I need to import one dumpfile to multiple schema but it's not working. impdp "'system/redhat as sysdba'" dumpfile=CTBNGUMB_14022011.dmp logfile=CTBNGUMB_IMP_1602.log directory=DUMP_DIR remap_tablespace=NGUMB_TS:TRUSTWARE01 remap_tablespace=TRUSTW

  • [CS3] GREP search first ocurence only

    Hi! I have an alphabetical list: Asdfg Awert Bsdfg Bwsd Csdfg Cwsd etc Is it possible to grep search first occurrences of A:s, B:s, C:s etc and then apply some formatting? ie search first line that starts with A, apply formatting, ignore following li