Problem installing external hard drive

I'm trying to install a Acomdata external hard drive on my new Macbook (Mac OS X version 10.5.1).
Despite following the directions and completing the installation accordingly, and after restarting the computer, when I click on the desktop icon, "SecureHD Login", a "No Device Found" message appears.
Any assistance you could give me would be much appreciated.

Same questions apply. I tried looking up your drive based on what you said, but there are about 9 models of the ACOMData 500GB external drive (USB, F/W, 'Hybrid', etc). Not knowing which you have makes it a little tougher.
That said, here's some basics to know (some are BASIC, but I have to say them):
If the drive can take an external power source/has a power switch it needs the external power. There are bus-powered drives out there (e.g. WD Passport drives).
If you're still uncertain, the size usually gives it away. Small (2.5" drives) are bus-powered. Big (3.5" drives) are not.
Bottom-line, no power, no drive.
Two, Leopard came with a bunch of new drivers. Some supercede the versions shipped with Tiger+ driver packages shipped with devices/available on manu. website. Here's a good rule of thumb:
Try your device before installing ANY software from the manufacturer. You may be surprised to see it work just fine.
What if you installed first? well, if the device is working, who cares? If it's not, you'll need to revert back to the old drivers. You can do this through Time Machine, or reinstalling driver packs from 10.5.1 or the Leopard install disk.
If you're still stumped, drive stuff like this is solved WAY faster in-person. We're talking hours, not days. Be it Genius bar or some local geek you know, give in-person a shot. Offer your geek friend food/beer and let them at least diagnose what's going on. They may tell you a better way to phrase questions to the forum/Apple support/ACOM support.
Finally, don't be afraid to try support from ACOM. You paid for it in the cost of the drive. Might as well.
None of those are silver bullets, but I hope they help.

Similar Messages

  • Backup problems with external hard drive

    I bought a WD passport external hard drive and copied my itunes library onto a file there. I re-set the location of the library on itunes to the drive on the external hard drive. So far I have not deleted anything from my computer hard drive. However, when I am in itunes and click onto a song, nothing comes out of my speakers. Everything looks normal, as if the track is playing, but nothing is happening. I tried buying a new track off of itunes online, downloaded it, and installed it on my ipod; it plays fine, on my ipod, but will not play on the computer. Something is obviously wrong, but I can't figure out what has happened. Any help out there?
    Thanks!
    Delany

    It sounds to me like your iMac is on it's last legs....at least the internal hard drive. If you can't make a new Time Machine backup I would advise you replace your iMac as soon as possible.
    Assuming your three-week old backup is sound you should have no problems moving everything over to a new Mac. I would recommend you use the Setup Assistant that appears when you start up the new Mac (and note: It only appears the first time you start the new Mac; you can move everything over later on via Migration Assistant, but you may see issues with accounts if you opt for that route).
    I don't think you need the Genius Desk for Setup Assistant. You only have to power up the new iMac, answer a few questions....select "....From Another Disk..." When it asks how you want to move everything over....connect up your Iomega external drive...and wait for it to finish. (Could take several hours depending on the amount of data you're moving).
    A couple of notes:
    1.  If your Iomega is a Firewire drive you'll need a Firewire to Thunderbolt adapter to connect it to your new iMac.
    2.  If you need to load CDs or DVDs remember the new iMacs don't contain an optical drive. You would need to get an Apple SuperDrive or third part external burner if you need that functionality.
    I'm puzzled by the comment made in Seventy One's post questioning the reliability of the new iMacs. I upgraded from a 24" early 2008 model to a 27" model and everything works flawlessly. I hardly ever see the beachball anymore.

  • Aperture 3 problems with external hard-drives

    Because of an external drive failure I had to move my Aperture Library 350+gb to another external hard-drive (iMac only has 500 gb internal drive). It is working; however, about 2500 photos are referenced, the rest are managed masters. No problem apparently with masters. But cannot reconnect with referenced files because the external drive is now deceased and cannot be dismounted. (Please continue reading before firing off an answer telling me to repair the database with Opt Command at start up. That did not solve my problem.)
    I know how to individually reconnect files which were located on a (now) offline (permanently) volume. But is there no easier way to get Aperture to recognize that a drive no longer exists and a new drive has taken its place? (Yes. I have read about using SQLite Database Browser to change the UUID of the drive to the new drive. But this seems bizarre that a high end program like Aperture 3 requires users to tweak the database to get Aperture to recognize a new drive.) I have installed the most recent Aperture update. There was one today I believe. No help.
    Thanks for your input.

    paulfresh wrote:
    it also appears to be mavericks... I don't have any software programs installed for both my OWC and lacie drives and they still wont eject properly under Mavericks
    No, it doesn't appear to be Mavericks. All good here on the five Macs in my studios and all attached drives. But blame Apple if it makes you feel better.
    http://www.theregister.co.uk/2013/11/05/western_digital_fesses_up_to_mavericks_d ata_loss_mess/
    Cheers
    Pete

  • MacBook freezing and crashing/running slow, problem with external hard drive

    I've been having some issues for the past couple months with my laptop randomly freezing, usually when I have a lot happening. I've ended up having to hard-restart it several times because it will just hang and I can't get into the menu at all to force quit things.  In the past couple days, it's now started crashing completely, although restarting okay. This last time, though, it crashed while I was trying to empty the trash and since then it's been crazy slow and not very responsive.I tried running disk utility and ccleaner, and although they repaired some stuff they didn't fix the problem.
    I think iTunes might be the issue. I was trying to move my music library when this last thing started. I have it all on an external hard drive, and I was trying to move it from one folder to another. I tried repairing the external hard drive with disk utility to see if that was the issue, but now my files have all vanished and the external appears blank.
    I also recently installed BootCamp, if that makes a difference.
    I'm mostly just really unsure what to do. I don't want to do anything to the external because I need to recover the stuff that was on it, but I also need my laptop to be usable.

    Thanks for the response. I tried booting in recovery mode and running disk utility again and that seemed to help. It's still hanging when I plug in the external hard drive but otherwise seems to be working okay. My main issue now is the invisible files. I tried booting in Windows, planning to install Recuva to try and get the files back. However, they show up fine there. This is a relief but I'm not totally sure what is happening. I'm guessing the disk has somehow mounted incorrectly on the mac portion but I'm not sure how to fix that. I'm about to restart on the other partition and see what's going on there.

  • Error code 36 (problems with external hard drive)

    I have just upgraded to Yosemite and am now having major problem with my external western digital hard drive.  I cannot create new folders and when I hit command N I get error code 36.  I also cannot move files from one folder to the next.  When I try to move them I get the error message: "The operation cannot be completed because a file of that name already exists" and that simply isn't true.  None of the files' names exist in the other folder.

    Ok, It appears to be the fault of Western Digital.  I ejected the hard drive and then plugged it back in and it said that the drive was broken but I could still read the files and it told me to save the files on another disk and reformat.  So it was just a coincidence that I upgraded to Yosemite at the same time that my external hard drive broke.

  • Permissions problem with External Hard drive.

    Hi,
    I've been using my external hard drive for almost a year now and out of the blue last night I ran into a interesting problem. For some reason I couldn't transfer any files to a thumb drive and shortly after I realized I didn't have Read and write permissions for any files on my mac, and everything required my password to get to. I went into disk utility and repaired the permissions and the list went on forever. Upon completion of that nothing was resolved.
    SO! I popped in my Snow leopard disk and did a repair of the permissions and system through there hoping that would fix it. I than booted up the main drive and got stabbed in the face with a HUGE error message upon the apple loading screen with a "MISSING DRIVER" "KERNAL ERROR" "CORRUPT FILE" etc.
    I went back and did a restore from my external harddrive hoping that would work, and it did. I can access my time machine backups from my external harddrive but cannot do so through my own control.
    What should I do? Should I reformat my external harddrive? Which would suck because I'm a paranoid freak and if something would happen during the reformatting I will lose literally over a year of work that is crucial.
    error message upon opening my backup
    http://s91.photobucket.com/albums/k302/nomhak/?action=view&current=Screenshot201 0-03-01atMarch1-201061.png
    error message upon trying to backup
    http://s91.photobucket.com/albums/k302/nomhak/?action=view&current=Screenshot201 0-03-01atMarch1-201-1.png
    icon of backup drive
    http://s91.photobucket.com/albums/k302/nomhak/?action=view&current=Screenshot201 0-03-01atMarch1-201062.png
    Can anyone shed some light?

    nomhak wrote:
    I went back and did a restore from my external harddrive hoping that would work, and it did. I can access my time machine backups from my external harddrive but cannot do so through my own control.
    What is that, a "clone?" What do you mean by "cannot do so through my own control."?
    What should I do? Should I reformat my external harddrive? Which would suck because I'm a paranoid freak and if something would happen during the reformatting I will lose literally over a year of work that is crucial.
    Again, what's on that drive? Do you have a clone and TM backups on the same external? If so, are they in the same partition?
    error message upon trying to backup
    http://s91.photobucket.com/albums/k302/nomhak/?action=view&current=Screenshot201 0-03-01atMarch1-201-1.png
    This one says you need to repair or reformat the disk; that means your backups are corrupted.
    Try to do a +*Repair Disk+* (not permissions) on it.
    If there are errors that Disk Utility can't fix, or the +*Repair Disk+* option is grayed out (meaning OSX has already determined that it can't fix it), post back.

  • What is the best pre-installed external hard drive for my macbook pro?

    I need advise on what kind of pre-enstalled external hard drive which supports both usb and firewire to get for my new macbook pro?  I would like to stay in the $100. range but am willing to go higher .

    giftshopgurl wrote:
    pre-enstalled external hard drive
    Pre-installed with what?
    Your best bet is to always format a new hard drive,  so there are no surprises.
    If you buy an external HD specifying  ready for Mac ( or some such) it will cost you more for nothing.

  • Problems with External Hard drive, will not mount and errors in disk utilit

    i have a powerbook g4 aluminum. i have an external hard drive for it. a simple tech 100gig portable drive, almost brand new. i dont know what happened to it, but one day i was starting my computer up with it attached. it wounldnt fully start up, said "waiting for local disks" so i uplugged the external hard drive. now it wont mount and will only show up in the disk utility of my friends macbook. i tried to verify and repair, and this is the message i got.
    Verify and Repair disk “UNTITLED”
    ** /dev/disk1s1
    could not read boot block (Input/output error)
    Error: The underlying task reported failure on exit
    1 non HFS volume checked
    1 volume could not be repaired because of an error
    Im in mexico writing a book and so i really need help on this one guys.

    Hi, hjbugs, and welcome to Apple Discussions. Disconnecting the drive while your Powerbook was accessing it probably caused your problem. It may be repairable using DiskWarrior or TechTool Pro, but if you don't have access to one of those and aren't going to buy one, reformatting the drive with Disk Utility may be the only other way to make it usable again. If it contains data you need to recover first (i.e., data that isn't also stored on your internal HD or other storage media), download the free demo version of one of the data recovery utilities mentioned in this thread and use it to see what is recoverable. If the files you need are recoverable, buy the full version of one of the utilities and recover them.

  • Problems sharing external hard drives with Lion

    I have 2 external hard drives connected to my imac. I had no problem sharing and accessing my external drives on other computers (pc & mac). Recently I just upgraded my mac os to Lion and since I am having problems accessing my external drives on my PC (windows 7).
    On my PC in the shared folder I can see the external drive folders but I am getting an error code when I try to open them. I have no problem accessing my imac folders on my PC, just my external drive folders.
    I would like some help because it would be nice to access them wirelessly on my PC without having to disconnect them from my iMac.
    Rome.

    My external hard drive was formatted in the FAT32 format--my iBook had no trouble reading or writing on this drive, and neither did my family's Dell deskop.
    If I recall correctly, the FAT32 format cannot store files larger than 4GB. Also, you will have to partition the drive. My 160GB drive was split into 4 parts, each about 30GB in size. This is another limitation of the FAT32 format.
    Formatting my drive was such a pain--and time consuming--that I didn't bother to format the remaining 30 or so gigabytes.
    I've reformatted my drive to be HFS and will likely do some work with our home network so that our Dell will be able to send files to my machine & then to the external hard drive.
    Programs exist for Windows machines to allow them to read a HFS (Mac-formatted) volume. If you want to be able to use all space possible on the hard drive, purchasing such a program may be your best option.

  • HELP!! Problems using external hard drive

    I have moved my iTunes music library from my internal hard drive on my laptop to a new external hard drive in order to free up space on my laptop. The problem I now experience is that when my external hard drive is conected and turned on, my computer will not recognize my iPod. When I turn the external hard drive off, my computer will then recognize my iPod. I can use one or the other but I can't use both at the same time. Because of this problem I can't access my iTunes music library with my iPod in order to update my iPod with new music that has been added to the music library on the external hard drive.
    Is it that I need a Firewire conection possibly? If so, is there any way around that? Any help would be appreciated!
    MY COMPUTER (purchased new in 2006)
    Gateway Laptop running Microsoft Windows XP Home Edition
    70 gig hard drive
    1.83GHz - 480 MB Ram
    MY IPOD (purchased new in 2006)
    80 gig - video enabled
    MY EXTERNAL HARD DRIVE (purchased new in 2007)
    Western Digital "My Book" Essential Edition (USB)
    250 gig (NTFS)

    Change the drive letter for the external drive.
    http://docs.info.apple.com/article.html?artnum=93499

  • Problem with External Hard Drive

    Hi,
    I'm having trouble with my External Hard Drive, a 300GB Iomega USB. Everytime i use it with my iMac G4 it disconnects by itself and i get the "Device Removal" message after 20 minutes or so. This occurs even though the Mac hasn't moved, the Hard Drive and its wire wasn't moved and even when I'm not doing anything on my Mac. This occurrs in all three of the USB ports even though other devices plugged into them work fine.
    It's a problem with your External Hard Drive and/or its wire i hear you say. However, the External works fine when plugged into my Windows Laptop.
    Any help would be much apreciated as all my music, movies and work are on my External.
    Thanks in advance,
    K

    Hi there:
    You may have to use a Mac disk utility on the external USB hard disk drive, since the error
    you see is likely caused by some defect. And the symptom is in how the drive fails to mount.
    Perhaps a tool like Disk Utility could see what kind of errors, but not fix them; if this is the
    case, a more specific tool such as DiskWarrior (for the Mac OS your machine has) may help.
    Depending on the level this problem exists, the drive may be repairable through use of one
    of the disk utility type of tools; or it may need to be erased, reformatted, etc. So, if there is
    some kind of error in the directory or other portion, DiskWarrior could probably fix it and not
    interfere with the data on the drive... Or, that's the hoped-for outcome.
    And that direction is likely one to pursue. For the sake of discussion, you - do - have extra
    USB cords, just in case you have one that does not like Macs? A diabolical PC infiltrator?!
    Good luck & happy computing!

  • When is Apple going to fix the problem with external hard drive not working on Lion?

    As for everyone else external hard drive does not work with Lion.
    When will Apple fix this problem. Do they just ignore the customer : (

    Copy off all your data off the NTFS formatted drive to another drive
    Open Disk Utility in the Applications>Utilities folder
    Select your external NTFS drive on the far left,  should have the drive makers name, a ID perhaps plus the word "media"
    Click the Partition Tab, click the big box and click 1 Partition
    If you want a Mac only drive > Option: GUID >format OS X Extended (Journaled)
    If you want a Mac/PC drive (for over 4GB sized files) > Option: MBR > format exFAT
    If you want a Mac/PC drive (for the most compatibility with other devices, Win XP, but only under 4GB sized files) > Option: MBR > format MSDOS (FAT or FAT32)
    Give it a name and click Apply.
    You can also search Microsoft for a free exFAT download if you have Win XP.
    https://discussions.apple.com/message/16276201#16276201

  • Hardware or software problem with external hard drive?

    Hi folks.  I have an OWC Mercury Elite external hard drive  with a capacity of 500GB.  I'd been using it to back up my iMac for about 1 1/2 years by copying my "home user" folder into the external drive.  I was keeping about three old backups on the external hard drive and there was plenty of capacity left.  Then all of a sudden when I tried to back up, I got an error message that said something like, "cannot copy Desktop5 because of insufficient space."
    I tried to fix the problem by deleting all but my most recent backup, but it didn't help.  Right now, the external drive is showing "Capacity" of 465.64GB with 11.69GB listed as "Available."  I have a complete backup of 32.63GB and a partial backup of 15.46GB on the external drive, but otherwise I can't find anything else on it.
    Is this problem caused by my external drive, my operating system, or something else (i.e., ignorant operator)?  Many thanks in advance for any help you can give.
    Regards,
    John

    pushprogress wrote:
    ...Then I went to empty the trash...175,000 items in there.  Gotta get around to that more often!
    Easy thing to miss, especially with an external drive that you are mounting and unmounting. Glad to hear you're back in the water.

  • Problem partitioning external hard drive with Disk Utility

    I'm trying to create a new partition in disk utility in an external hard drive using disk utility and every time I click Apply it says that "Disk Utility has lost its connection with the Disk Management Tool and can't continue. Quit and relaunch Disk Utility". It is a 3TB hard disk and I already created the first partition of 2 TB, and when I click the + symbol to add a 1 TB partition and click Apply is when the error shows up. I have restart the mac, unplugged the hard disk but the error still shows up. Anyone has any idea??? Thanks for your help in advance
    David

    I solved this issue. I was able to create the partition with the format MS-DOS and then I erased it to the Mac OS Extended (Journaled) format.
    Now it is working OK. Hope this help someone

  • Time machine problems w/ external hard drive and airport extreme

    Time machine is keeping backup for only 6 days + the hourly backup. When I open time machine preferences, though, it appear that time machine is off. When turning it on it does not show my external hard drive (however, the backup has been running as mentioned above, for 6-day history). When I select other time capsule it shows the airport extreme but nothing can be done from then on.

    Time machine is keeping backup for only 6 days + the hourly backup. When I open time machine preferences, though, it appear that time machine is off. When turning it on it does not show my external hard drive (however, the backup has been running as mentioned above, for 6-day history). When I select other time capsule it shows the airport extreme but nothing can be done from then on.

Maybe you are looking for