Problem Installing Final Cut Studio

I am trying to load Final Cut Studio on my Mac Pro Tower and it told me that i need to have an Intel processor. How do I fix this problem?

Understand that running the final cut apps on a g5 is not supported. The PPC architecture of the G5 is quite different than that of an intel machine.
x

Similar Messages

  • Problems installing Final Cut Studio on my new Macbook Pro

    I just got my new 17 inch Macbook Pro, and am trying to install Final Cut Studio 3.  It installed just fine, and accepted the serial number.  The problem is that every time I open the application, I have to reenter the serial number.  Once I do that, it runs fine, but the next time, I have to reenter the info again.  Anyone have an idea of how to fix this?
    Rob Krampf

    do some searching here.  I remember other people having this problem.  You might also try repairing permissions on your startup drive, deleting your fcp preferences
    https://discussions.apple.com/docs/DOC-2491
    And creating a new account in system preferences:  accounts.

  • Problem installing Final Cut Studio 2 on MacBook Pro

    I'm trying to install Final Cut Studio 2 on a MacBook Pro / Snow Leopard but when it comes to choosing install options Final Cut Pro is greyed out and just says skip.
    I've done some research and found people with the same problem but none of the fixes I've seen have worked. I also have Logic Pro installed - which I installed first - which seems to be causing the problem. I've tried removing Logic but am still seeing the same problem.
    Besides a clean install does anyone have any suggestions?

    Read this article on how to install final cut pro after logic studio.

  • Problem Installing Final Cut Studio Upgrade

    I recently purchased the Final Cut Studio Upgrade. When I went to input my SN for FCP 6 to install the upgrade, it rejects it as invalid. Have FCP 6 on my computer operating just fine. what gives?

    Check to make sure your current FCP install (FCP 6) isn't an academic or Not-For-Resale version; neither is eligible for upgrade.
    If you have a legitimate retail version of FCP 6, make sure you are entering the exact serial number as found on the two stickers affixed to the front of the booklet titled "Installing Your Software" that came packaged with FCP 6.
    Be careful to enter a 0 (zero) instead of an uppercase O and a 1 (one) instead of a lowercase l (L) or vice versa. The serial number should be 1 letter - 3 numbers - 3 letters - 3 numbers - 3 letters - 3 numbers - 3 letters - 3 numbers - 3 letters - 3 letters - 1 letter with 3 numbers
    -DH

  • Problem installing Final Cut Pro Studio 5

    When i install Final Cut Studio (w/Admin account) and type the correct Serial number i receive the next Error: "Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
    I yet use the disk utility with "First Aid/Repair permission".
    Mac Pro   Mac OS X (10.4.8)  
    Mac Pro   Mac OS X (10.4.8)  

    You're welcome... Just so you know how the discussions are supposed to work, you should click on the or buttons over posts as appropriate...
    Patrick

  • DVD Studio Pro problem at Install Final Cut Studio

    Hi,
    I'm a new (not very knowledgeable user)trying to install Final Cut Studio.
    My iMAC configuration is: 2.8 GHz Core2 extreme, , 2GB 667 DDR2 SDRAM, 1 TB Serial ATA drive, Super Drive 8X, plus a 1TB G-Raid.
    I placed my final cut studio installation disc into the system and started the dialogue. Here's the result:
    1) Final Cut PRO box (blue) checked Action= install
    2) Color

    Aborted queston answered later, Thank you

  • Why Can't I Install Final Cut Studio?

    I have a MacBook Pro which is about 12 months old. It has a 2.66GHz Intel Core i7 Processor and 8G of RAM. I have been trying to install Final Cut Studio 5.1. Yeah I know that is an OLLLLLLLLLLLD version. Why I chose not to update is neither here nor there. I was about to update when Final Cut Pro X was realeaded and FCS vanished into the ether. I really only wanted DVD Pro but when that wouldn't install I went back to Square 1.
    The specificationa as stated are:- "These discs contain the files required to install Final Cut Studio 5.1 on either PPC or Intel based Mac computers."
    The error message that shows up on the screen when I click on the install package is:- "You can't open the application Final Cut Studio pro.mpkg because Power PC applucations are no longer supported."
    This is despite the stated specifications and the fact that there is a Universal Icon on the discs.
    I am also having a simillar but not the same problem with iLife '06 but i'll start another thread on that.
    I'm confused, thanks for your help in advance.

    Your problem is you are running Lion as your OS (10.7) and Lion does not support Rosetta which is required to run the INSTALLER of FCS 2. If you were running Snow Leopard, you would have been able to do the install.
    MtD

  • I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    I am using a macpro 12 core computer
    I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

    You can have them both on the same computer as I and many others have done for years.
    Just go ahead and install FCS 3 normally.
    There will be absolutely no problems.

  • Strange Window at start-up after installing Final Cut Studio 2

    After installing Final Cut Studio 2, everytime I start up I get a window with the Final Cut icon in it And the following text:
    Alert Title
    Alert: something happened
    At the bottom are two buttons:
    Cancel and OK

    I had the same thing, in my startup items was something called "alert" i deleted it... no more "nothings happened" a few people had this problem and have now solved it !
    Yay i solved something for people!
    jas

  • I'm having problems registering Final Cut Studio

    I recently purchased and installed Final Cut Studio. I successfully installed it, except there was a message at the beginning of the process saying there was some sort of registration problem. I don't know exactly what the message was and can't replicate it now. the program did complete the install process but when I try to open individual application I am prompted to enter a registration again. I tried entering the number that registers the whole suite but that didn't work.

    I am afraid to do this because my hard drive is almost full. this brings up another question. I wanted to do a custom install and put what ever I could on another ATI drive in my computer but somehow that custom install thing seemed to fly right by without giving me an oppourtunity to do anything. What will happen if I reinstall? Will it install all the content again? I only have 9GB left on that hard drive. I was going to try to move all that once I was able to open the apps. How can I just uninstalll everything and just start over?

  • Error installing Final Cut Studio and iLife on Leopard

    When I upgraded to Leopard, I decided to entirely wipe my boot drive since I was experiencing problems with certain applications (ie: Final Cut Pro) in Tiger. Therefore I've been re-installing all of my applications in Leopard. I've been having some problems though, when I try to install Final Cut Studio, I get this message after a while of it trying to install the Apple Soundtrack Pro loops disc:
    http://salsunproductions.com/misc/fcsinstallproblem.jpg
    I also get a similar error when trying to install iLife 06.
    The strange thing is that I am able to run the Applications fine with the exception that all my Final Cut Studio applications don't remember their serial number and my name/organization. I get this message every time I boot up a Final Cut Studio Application (this is the original Final Cut Studio, PPC)
    http://salsunproductions.com/misc/fcssnbootup.jpg
    Message was edited by: salilsundresh

    As for the registration problem:
    http://discussions.apple.com/thread.jspa?messageID=4582284&#4582284
    As for the disc install, if you're sure you're disc isn't just scratched, then I guess there's nothing to do but wait for 10.5.1 and see what happens.

  • I am trying to install final cut studio on my computer. I get to where it asks me to insert audio disc 2 and it fails.

    I am trying to install final cut studio on my computer. I get to where it asks me to insert audio disc 2 and it fails.How do I continue to install?

    What I've done to get around the problem of quircky DVD readers is to create a disk image of each of the installation discs and store them on an external firewire drive. When I need to install/reinstall, I open the images and put them all on my desktop then launch the installer from disk 1. Since all the disks are available, the installation happens without any intervention from me and is done within 30-45 minutes. (your time may vary depending upon computer variables)
    Best,
    x

  • Kernel Panic(s) after installing Final Cut Studio

    So I've been using this Mac Pro for 10+ months.
    10G Ram, 3 internal hard drives, OSX 10.5.8.
    Been running Logic Pro and Aperture and other small apps with zero problems.
    Recently, the only change to my computer is I installed Final Cut Studio and Logic Studio Upgrade.
    Past 3 days I've gotten 2 kernel panics. (Report said something about FBD Memory?)
    (1st one, I was using Mpeg Streamclip to transcode footage.
    2nd one, I was only running Safari.)
    I repaired disk permissions, used diskwarrior, did the hardware diagnostic test thing, nothing came up.
    I asked Apple Genius but they just said reduce everything to 'base config' and troubleshoot from there.
    I wanna ask you guys, do you know of any obvious existing conflicts between the software that might be going on? Am I missing something obvious?

    Have a look at System Profiler and if you have ECC errrors on the third slot (after rendering some time), you might have the same problem like me and it's not solved yet. But you can take out the third dimm or run smcFanControl and raise the speed a little. Both helps in my case as a workaround.
    http://discussions.apple.com/thread.jspa?threadID=2018048&tstart=90

  • How can I install Final Cut Studio 2 on my new MacBook Pro with Lion?

    I just purchased and received a new 15" MacBook Pro (non-retina) last week. I need to install Final Cut Studio 2 on this computer. I have researched this and found that I need to install Rosetta from the Snow Leopard DVD in order to do this. This is the first Mac I've bought ( although I've been working with them for years), so I don't have a Snow Leopard DVD. I am a high school teacher and we use FCS 2 for my classes so buying FCP X is not a viable option for me since I teach FCP 6. The iMacs we use in school run Leopard and were never upgraded to Snow Leopard (budget cuts and all), so I can't even borrow one from my district.
    Does anyone know how I can obtain Rosetta? Or another way to install this without it?
    Thank you ! :)

    There is no way to add Rosetta support because it is not supported by OS X Lion at system level. This has been documented before the release of OS X Lion by itself.
    If you really need Final Cut Studio 2, I would return your computer if possible, and purchase a Mac that is capable of running Snow Leopard (all 2010 models, early 2011 MBP and some other 2011 models)

  • How can Install Final Cut Studio in my Mac Pro Early 2009 ??

    I have Final Cut Studio 7  NOT installed yet and Mac Pro Early 2009 with  OSX  10.9.5. I have Final Cut Pro X  Version  10.1.4 installed. Can I installed Final Cut Studio here together with  FCPX ?? Maybe not. What is the best way to install FCP Studio??
    Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ??   10.6,  10.7,  10.8, 10.9  ??
    Thanks for any help I can get
    Alberto Marban

    Here is the Best Practice Guidelines from Apple:
    Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
    MtD

Maybe you are looking for

  • CS4 'my documents' folder change

    Hello helpful keyboard strokers, Due to a change in servers at our Planetarium, I am now having troubles with CS4 PP and the AME.  It would appear that my computers' my documents' folder was located on the old server; when PP loads, it can't find it

  • GL Account is not getting picked by billing document

    Hi Gurus, one new GL account is set up by our FI team for a accrual condition type. case 1: Now when i have cancelled the previous created billing doc and trying to create again then the new GL account is not getting picked. case 2: Whereas when am d

  • ITunes application error. 13014!!!!!

    Hey im running a pc with XP and trying to get itunes up and running so I'll be able to get my iphone update. Well that is harder than i thought i keep getting this "The iTunes application could not be opened. an unknown error occurred. (13014). I've

  • Can i take a snapshot of my screen?

    is there a way to take a snapshot of my MacBook Air screen??

  • How to i get text collection data from BD Opportunities XBO node

    Hello everyone,                My requirement  is need to store text collection data of BD Opportunities XBO in another customized Business object but issue i have facing in BD Opportunities XBO there is not found any textcollection node in XBO.