Problem installing final cut

i have some problems with first install, so I've tried to install final cut again and i can't mark Final Cut in installer, imac think that is already installed, but it is not. how to fix that??

The way the installer works is that once you install the software, you are required to install that software when you install the second time. In this case, Final Cut Pro will be checked and grayed out; require to install Final Cut Pro.
If Final Cut Pro is indeed unchecked and grayed out, move the mouse over Final Cut Pro (in the Custom Install panel) for few seconds... it should show a yellow tool tip explaining why you can not select and install. Usually, you run into this situation if you system does not meet minimum requirement... but that's not the case here since you were able to install the first time.
-Takayasu

Similar Messages

I have a new iMac but having problems installing final cut express 4 from old macbook pro ?

i have a new iMac but having problems installing final cut express 4 from old macbook pro ?

FCE was discontinued nearly 3 years ago and is no longer supported.
I don't know whether it's possible to install it on Mavericks and if you do it may not perform properly.
Final Cut pro X and iMovie are the only Apple apps that are supported.

Problems installing Final Cut Studio on my new Macbook Pro

I just got my new 17 inch Macbook Pro, and am trying to install Final Cut Studio 3. It installed just fine, and accepted the serial number. The problem is that every time I open the application, I have to reenter the serial number. Once I do that, it runs fine, but the next time, I have to reenter the info again. Anyone have an idea of how to fix this?
Rob Krampf

do some searching here. I remember other people having this problem. You might also try repairing permissions on your startup drive, deleting your fcp preferences
https://discussions.apple.com/docs/DOC-2491
And creating a new account in system preferences: accounts.

Problem installing Final Cut Studio 2 on MacBook Pro

I'm trying to install Final Cut Studio 2 on a MacBook Pro / Snow Leopard but when it comes to choosing install options Final Cut Pro is greyed out and just says skip.
I've done some research and found people with the same problem but none of the fixes I've seen have worked. I also have Logic Pro installed - which I installed first - which seems to be causing the problem. I've tried removing Logic but am still seeing the same problem.
Besides a clean install does anyone have any suggestions?

Read this article on how to install final cut pro after logic studio.

Problem installing Final Cut Pro Studio 5

When i install Final Cut Studio (w/Admin account) and type the correct Serial number i receive the next Error: "Licensing Error: The license file will not be written to disk because the user does not have enough privileges."
I yet use the disk utility with "First Aid/Repair permission".
Mac Pro Mac OS X (10.4.8)
Mac Pro Mac OS X (10.4.8)

You're welcome... Just so you know how the discussions are supposed to work, you should click on the or buttons over posts as appropriate...
Patrick

Problem Installing final Cut Express HD 3.5

I am presently using Final Cut Express 2.0. Trying to upgrade to Final Cut Express HD 3.5. After the installer asks for the Product Serial#, it stops installing for lack of Hard drive space (never see a Custom install window where I could install Livetype, templates, loops, etc) on a separate disk.
I cloned my OS on a new drive. Tried to re-install Final Cut Express HD, The Installer never asked for the Product Serial # as before. It only loaded the LiveType, loops, templates, etc. The Final Cut Express HD option was blanked out. It never got loaded. Need Help. What am I doing wrong.? It seems that once you try to load FCE HD once, it won't let you do it again
PowerMac G4 Mac OS X (10.4.8) Dual 500MHZ CPU
PowerMac G4 Mac OS X (10.4.8) Dual 500MHZ CPU

Thanks Tom. I did call Apple last night but they kept me waiting for so long that I gave up. I will try to call them again. But, I don't think any of the FCE HD files were loaded since that option was grayed out (could not be selected). The Re-install was on a new Hard drive and I could select only loops, templates, etc. for loading. It's like the old FCE 2 could not be upgraded at all. Could that be a possibility ? I thought one could upgrade from FCE 2 TO FCE HD. Am I wrong?
by the way, I read your book on FCE and I think it's great.

Problem Installing Final Cut Studio Upgrade

I recently purchased the Final Cut Studio Upgrade. When I went to input my SN for FCP 6 to install the upgrade, it rejects it as invalid. Have FCP 6 on my computer operating just fine. what gives?

Check to make sure your current FCP install (FCP 6) isn't an academic or Not-For-Resale version; neither is eligible for upgrade.
If you have a legitimate retail version of FCP 6, make sure you are entering the exact serial number as found on the two stickers affixed to the front of the booklet titled "Installing Your Software" that came packaged with FCP 6.
Be careful to enter a 0 (zero) instead of an uppercase O and a 1 (one) instead of a lowercase l (L) or vice versa. The serial number should be 1 letter - 3 numbers - 3 letters - 3 numbers - 3 letters - 3 numbers - 3 letters - 3 numbers - 3 letters - 3 letters - 1 letter with 3 numbers
-DH

I'm having problems installing final cut pro pls who can help.

i just bought a macbook pro and i have a final cut pro, i've had it for two years now. i tried installing it to my new computer its not installing. please i want to know is it because the final cut is old or there is other reason.

Hi ...
Since you purchased Final Cut Pro two years ago, then post your question in the Final Cup Pro forum here.
This forum is for apps that have been purchased and downloaded from the App Store which has only been available since Jan 2011.

Problem Installing Final Cut Studio

I am trying to load Final Cut Studio on my Mac Pro Tower and it told me that i need to have an Intel processor. How do I fix this problem?

Understand that running the final cut apps on a g5 is not supported. The PPC architecture of the G5 is quite different than that of an intel machine.
x

Problem install final cut 6

I want to install the final cut 6 and in the custom installation I cannot select the Final cut pro package

When i selected it comes this messege under
Final Cut Pro and Boris Calligraphy titling generator. Upgrading is required if an older version is already installed.

Problem Installing Final Cut Express HD v3.0

Hi,
I'v already installed FCE HD v3.0 on my iMac - no problem.
But when I try to install it on my MacBook (Intel Core Duo 2.16GHz, OS X 10.4.10) it comes back with the following error message:-
"This software requires certain hardware or software which is missing - AGP Graphics Card"
But I thought a graphics card came already installed on my MacBook, Also the MacBook confirms the following information about the graphics when I do an "about this Mac" enquiry:
Graphics:
Intel GMA 950
Chipset GMA950
Any ideas why I can't install FCE on the MacBook?
By the way I've had a video camera connected and turned on when I've tried to install (as required in the manual).
Many thanks for reading my request, and hopefully replying
Phil in France

Press the "esc" key.
You don't need to have a camera connected when you install.

I have a Macbook Model No A1181 2.4 GHz intel core 2 Duo with 4 Gb Ram. Should I be able to instal Final Cut Pro 3.0.2 cos I'm having problems?

I have a Macbook Model No A1181 2.4 GHz intel core 2 Duo with 4 Gb Ram. Should I be able to instal Final Cut Pro 3.0.2 cos I'm having problems? As I read it My machine should be able to run the software.
Thanks in advance

You are trying to use software that is over 10 years old. As I read it, FCP 3.0.2 required 10.1 or higher at the time, but as FCP is reliant on quicktime, which has been updated many, many times, I doubt that you will ever get it to work properly.

Problems after installing Final Cut Pro X

I have had a few problems with Final Cut Pro X. Up untill a week ago it worked smooth and fast. I have off the equipment I need on my computer to run the program and tons of RAM. I recently was running low on disk space and cleared that as well. My FCPX will not respond now when I open it. I hide all my event and projects in other folders and placed one by one, and nothing happend. I reset all preferences and nothing happened. I took the final step and removed the program from my computer and re installed and the same problem is accuring. Please if anyone can give me so step by step process or a number to call a support line I would appreciate it. I cut video as a part time job and need this ASAP. Thanks - FooManFilms.com

SO, my friend is running both FCS 7 and FCP X on the same harddrive.
snowleopard with the latest upadates.
hmmm
yes, the funny thing is, I have FCS 6 and FCP X on one Disk running Snowleopard.
NO problems. Uprade to Lion... No Problems.
And also I could not find information on the web of somebody else having this problem.

DVD Studio Pro problem at Install Final Cut Studio

Hi,
I'm a new (not very knowledgeable user)trying to install Final Cut Studio.
My iMAC configuration is: 2.8 GHz Core2 extreme, , 2GB 667 DDR2 SDRAM, 1 TB Serial ATA drive, Super Drive 8X, plus a 1TB G-Raid.
I placed my final cut studio installation disc into the system and started the dialogue. Here's the result:
1) Final Cut PRO box (blue) checked Action= install
2) Color

Aborted queston answered later, Thank you

HT5149 Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found. Reason why I have to reinstall is because I have repaired my Macbook Pro hard

Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps.
Reason why I have to reinstall is because I have repaired my Macbook Pro hard drive at a Mac Authorized Repair.
Short history of repair and my Final Cut Pro installation:
1. Macbook Pro stopped working, sendt it for repair. Had the Final Cut Pro installed,
2. Desided to try a MiniMac and recovered my backup with Time Machine, got the Final Cut Pro working.
3. Got my Macbook Pro back from repair, did backup on this one as well. But this time only the files not the Applications.
4. Removed the files as mentioned in HT5149. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found.
5. When I try to install Final Cut Pro from App Store, it downloads the application as planned. But after download it won´t show in the Application folder nor in the downloads folder, nor will it start an installation prosess. If I pause the installation in App Store, I can see the Final Cut Pro icon in my Dock. (But, as mentioned, after installation it won´t show neither here or in the Applications folder).
Any suggestions on what I should try now?
Thanks for any reply, I´m in deep water here...

Sounds like there is a file you're not getting. Never do a removal manually. It's so time consuming and a pain. There's a very easy and fast way to do this, safely, properly.
Get the free "Final Cut Remover" app from Digital Rebellion (dot com), use this to remove FCP X.
Reboot the Mac.
Download from scratch.
If you're not seeing FCP X in your app folder, run Disk Utility to Repair all drives.
If that doesn't help, try running Disk Warrior from Altsoft to repair the directories on all drives.

Problem installing final cut

Similar Messages

Maybe you are looking for