Problem installing Flash 9.0 I get "access error code"

Up until about a week ago I had Flash installed like every other human on the planet. But then one night flash was gone from my internet. Everywere I went I got the little puzzle piece icon telling me to go and reinstall Flash 9. So I follow the link. Download Flash 9.0 installer and then half way through installation an error pops up.
It says "Error creating folder. 1008:9,-5000 Access denied error" When I click OK it gives me another message saying "You do not have enough access privileges for this installation".
I cant for the life of me figure out why it's doing this and I dont know what to do. Not having Flash is like not having color TV. HELP!

hi there--
i found a link with info concerning this error which recommended typing the following into terminal to resolve this issue--
sudo chmod 775 /Library/Components
the link is here if you'd like to look over it. http://www.unibrain.com/support/FAQFire-iDC.htm seems it is a permissions error. it is not for the same thing, but the error is the same, because it is an os x error, not a flash error. you could also simply try repairing the permissions beforehand. [ 8 ) ]

Similar Messages

I want to install Photoshop but everytime I get an ERROR CODE: A12E1.How do I solve that and what is it?

Hello,
I want to install Photoshop but everytime I get an ERROR CODE: A12E1.How do I solve that and what is it?

A12E1 error installing Creative Cloud products | CC
Mylenium

HT201413 I am receiving the error code (-50). The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system. Is this why I get the error code? I can access the itunes store to view my account. Any ideas

I am receiving the error code (-50) when trying to access the itunes store. The original itune songs etc were installed on a win 7 32 bit system and I have now moved to a win 7 64 bit system (same PC) and have copied the folder across. Has the switch from 32 to 64 bit caused the problem? Is this why I get the error code? I can, however, access the itunes store to view my account. Any ideas please?

Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Java - Axis2: How to get an error code / error message from the Javascript via SOAP

Hi
In our Java applicsation we call a Javascript in a Indesign CS Server using the following code:
--- SNIP BEGIN ---
// calls the remote service on the indesign server
try {
// create service
ServiceStub oIndsgnSrvStub = new
ServiceStub(sIndesignServer);
// create service parameter
ServiceStub.RunScriptParameters
oIndsgnSrvRSParams = new ServiceStub.RunScriptParameters();
// create arguments with source- and target-file for parameter
ServiceStub.IDSPScriptArg[] oIndsgnSrvSArgs = new ServiceStub.IDSPScriptArg[2];
oIndsgnSrvSArgs[0] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[0].setName("xml-input");
oIndsgnSrvSArgs[0].setValue(sSourceFile);
oIndsgnSrvSArgs[1] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[1].setName("output-file");
oIndsgnSrvSArgs[1].setValue(sTargetFile);
// define service parameter
oIndsgnSrvRSParams.setScriptArgs(oIndsgnSrvSArgs);
oIndsgnSrvRSParams.setScriptFile(sScriptFile);
oIndsgnSrvRSParams.setScriptLanguage("javascript");
oIndsgnSrvRSParams.setScriptText("");
// create runscript
ServiceStub.RunScript oIndsgnSrvRS = new ServiceStub.RunScript();
// set parameter
oIndsgnSrvRS.setRunScriptParameters(oIndsgnSrvRSParams);
//$$$ there should be an answer returned by the InddSrvr
// execute SOAP call
ServiceStub.RunScriptResult oIndsgnSrvRes = oIndsgnSrvStub.RunScript(oIndsgnSrvRS);
if(oIndsgnSrvRes.getErrorNumber() == 0) {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_SUCCESS);
bOK = true;
} else {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_FAILURE);
bOK = false;
//$$$ should be set, if there is something returned by inddsrvr
//oServerProdJob.setErrorMsg(sErrorMsg);
} catch(Exception e) {
sError += e.getMessage() + "\n";
bOK = false;
--- SNIP END -----
The problem is that we don't get the error code and/or the error message from the Javascript in oIndsgnSrvRes. The error code is always 0 if I set an Integer value as return in the Javascript. If I set a String, there is an Exception in the Java application.
Here is the Java script we use:
--- SNIP BEGIN ---
main();
main()
var sError = "";
var sXMLInput = "";
var sLayoutPath = "";
// get the SDKCodeSnippetRunner object
var cbpAdapter = app.cbpCbpadapterObject
if (cbpAdapter) {
sXMLInput=app.scriptArgs.get("xml-input");
sLayoutOutputFile=app.scriptArgs.get("output-file");
sError = cbpAdapter.doProcess(sXMLInput, sLayoutOutputFile);
return sError; // This give an Exception; if I return an Integer the ScriptResult is always 0
--- SNIP END -----
If I try this with the test application from Adobe I get the error code correctly. But in the Java application, using SOAP, I can't get the error code.
What could be wrong?
Any ideas?
Thanks a lot for the support.
Kind regards
Hans

user11340104 wrote:
Hello -
i am calling sqlplus from a bash shell script. If the sql statement generates an error, how can I return that error code (unsuccessful) back to the bash shell?
Well, let google be your friend,
http://www.google.co.in/search?rlz=1C1GGLS_enIN327IN327&sourceid=chrome&ie=UTF-8&q=sqlplus+error+codes
There are many threads I guess talking about the same issue.
HTH
Aman....

Problems installing flash player. Learner

I am experienceing problems installing flash player. I go to the adobe website and install the program and I am told it has been successfully installed. No flash player icon apppears on my desktop. When I press the windows start icon and click on "all programs" there is no evidence of the flash player. However when I click on" my computer" icon and go into uninstall/change the flash player program is there.I have spent quite some time installing, uninstalling and installing again without success
I am using windows Vista. I am also using Kaspsersky Internet security. It is a private computetr so I do not think I need administrators permission. I have tried installing flash player using both interner explorer and Mozilla firefox.Please can anyone help. Many thanks.

Shane, since you must be having problems getting a thread started, I'll just go ahead and try to help you here.
Use IE and go to Help and click on About Internet Explorer. It should tell you sp1 or sp2.
Also using IE, go to Tools, click on Manage add ons and look in all add ons for Shockwave Flash Object. Let me know if it is Enabled and if it is version 10.0.45.2 or says Flash10e.ocx.
Then switch over to FF (Firefox) and find the plug-in SWF version 10.0.45.2 and make sure it is listed and Enabled.
Post this info back to me.
Thanks,
eidnolb

How do I install Flash Player when I get a message to close Internet Explorer??

How do I install Flash Player when I get a message to close Internet Explorer???

Hello Vicram,
Much thanks and appreciation
ZZZZZZZZZZZZZZZ
Date: Thu, 27 Jun 2013 13:04:09 -0700
From: [email protected]
To: [email protected]
Subject: How do I install Flash Player when I get a message to close Internet Explorer??
    Re: How do I install Flash Player when I get a message to close Internet Explorer??
    created by VikramGaur in Installing Flash Player - View the full discussion
Hello,
Welcome to Adobe Forums.
You can download offline installer for Flash Player from here : http://helpx.adobe.com/flash-player/kb/installation-problems-flash-pla yer-windows.html#main-pars_header
Before you run the installer, make sure Internet Explorer is closed.
If it still prompt you to close IE, then this might help : http://forums.adobe.com/message/5393818#5393818
Thanks,
Vikram
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5456791#5456791
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5456791#5456791
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5456791#5456791. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

When I try to install iTunes.. I get an error saying: "Could not access network location %PUBLIC%\Desktop.. Can anyone help?

When I try to install iTunes.. I get an error saying: "Could not access network location %PUBLIC%\Desktop.. I tried some tutorials on YouTube to try an fix this problem, but none seem to help.. So does anyone have any suggestions on how to fix this? Please help ASAP.

This user tip:
"Could not access network location %PUBLIC%\Desktop\" install errors
Click on the words in the title of the user tip. It's a link to the user tip.

Problem instaling flash player plz help

I am having problems instaling flash player 10, i am using windows 7 and when i try to dowmload it there is a window that comes up saying that it did not pass the integrity check can anyone advise me on what the problem is?

Try downloading the offline installer(s):
for Internet Explorer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe (save to disk);
for all other browsers http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe (save to disk);
close all browser windows, then run the downloaded installer(s).

I erased my HD. Now I can't instal mountain lion from my bootable flash drive, and keep getting "installation error. Try again."

I bought mountain lion, made a bootable flash drive.
I booted from it and it went to upgrading right away!
So I stopped it and went to my former recovery partition I erased my HD because I wanted a clean start.
Now I can't instal mountain lion from the bootable flash drive, and keep getting "installation error. Try again."
and there is no 4 choices window.
I don't know what to do.

How did you create the USB install thumb drive? If it was with Disk Utility I have run into this problem and have since used THIS program to make the USB install drive.
As to your problem you only have one option and that is to Reinstall the Original OS X version that came on your computer or if you still have the Lion Recovery Partition use that to reinstall Lion. Or if you system came with Lion and you have No Lion Recovery HD Partition you can boot the system from over the internet and Reinstall Lion.
At startup hold down the Command+Option+r keys until you saa a spinning Globe in the center of the screen. Once that loads Repartition the drive as One partition and then reinstall Lion.

Problem installing flash player, have tried 5 times today!

How do I fix it I have installed flash player 5 times today and every time it is done it Say installation complete and the browser opens up saying all is good but then I go to a web site that requires flash player and I get the error message that I need to install flash player.

Check
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

When trying to install Itunes 10.2 I get an error message "Could not access network location %APPDATA%\." How can I fix this?

When trying to install Itunes 10.2 I get an error message "Could not access network location %APPDATA%\." How can I fix this?

With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program

Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem m

Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem making the program no longer work properly. The program is closed and there is a notification if a solution is available.

I may have just solved my own problem. Right after posting this I googled bezel lightroom and found this: Flickr: Discussing The word 'bezel' appears in the taskbar. in Adobe Lightroom
I changed the setting in the view menu and now everything appears to be working fine. I cannot explain why it stopped working before because I hadn't made any previous changes to the view options.
Still am curious about the memory usage, though.

Anyone else having a problem installing the 13.1 update to Elements 13. I keep getting the Error Code:U44M1I210

Anyone else having a problem installing the 13.1 update to Elements 13. I keep getting the Error Code:U44M1I210

I don't know what to tell you. I get the same crap. I have been into computers for about 25 years now and it really ticks me off that after all these years these companys can not put out something that works. It seems like they put it out then expect the buyer to fix there screw ups. Why should we have to do there jobs and have to pay for it too?

Problem installing flash cs5,5

help ! i need help! im trying to download flash cs5.5
i get this :Exit Code: 24
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DS003, DS013 ... WARNING: DS013, DW016 ...
-------------------------------------- Summary --------------------------------------
- 13 fatal error(s), 23 error(s), 49 warning(s)
how can i fix it?
thank you

Without exact system info and the full install logs nobody can tell you much.
Troubleshoot with install logs | CS5, CS5.5, CS6, CC
Mylenium

I uninstalled Firefox and not it will not install for me. I get a error that says, The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions. What can I do?

I uninstalled Firefox and not it will not install for me. I get a error that says, The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions. What can I do?

Here is a pic.

Problem installing Flash 9.0 I get "access error code"

Similar Messages

Maybe you are looking for