Problem installing HP Deskjet 5700 driver on my macpro!

Hi Folks,
i've just bought my Macpro and when I tried to install my HP Deskjet 5700, it pops up a few boxes and leaves me alone waiting for hours, has anyone had the same problem?
P.S. The driver CD is good coz I just installed the Windows version to my HP Laptop without any trouble

Welcome to the forums Karmela!
I saw your post about the installation error you are seeing when installing your Deskjet F2480. I would like to offer my suggestion to you to see if that will help.
Please see this post by @Jamieson who had posted a solution to the same error for another community member:
Here is the post: Installer cannot access this registry key
Please let me know the results and if the issue persists, include which operating system you are running.
Which Windows Operating System am I running?
I hope you enjoy your day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

How do I install HP Deskjet 5700 on Windows 7?

When trying to install I got an error message saying my computer's Operating System is not supported.

Hi Redbone7.
I understand you're looking for instructions on how to install your Deskjet printer now that you have a new hard drive. I'd be happy to help you with this!
In order to find you the right drivers though, I do need to know which model of Deskjet you have and if you're using Windows or Mac. Once I know those two pieces of information I will be able to post back with either a link to the drivers or a link on how best to install your printer.
I look forward to hearing back from you, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Problem installing a new hard drive

you need to restart your computer...hold down the power button for several seconds or press the restart button....please help i'm trying to install a new hard drive my first hard drive crash....please HELP meeeeee (sad face)

Sounds like you are getting kernel panics--usually hardware-related. You must not have something hooked up right or you have an incompatible HD.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

HP OfficejetPro L7780 - Problem installing HP Deskjet and Officejet Software Suite and Driver.

I was having problems with the scanner in my HP Officejet Pro L7780 All in One.
On an HP discussion board, I found that I should install the full HP Deskjet and Officejet Software Suite and Driver.
When I tried installing it, an error message popped up saying that "the application had requested the Runtime to terminate it".
I have no idea what this means. Any help/suggestions? Thanks!

Try following the document below Click on your OS, and follow as many steps as you can.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=ca&dlc=en&lc...
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Problems installing on new hard drive

Hi, I've got a mbp 17, early 2006 I think. I just removed the hard drive and replaced it with a new, larger drive to install snow leopard fresh. Now when I power up the light at the latch comes on and I hear the SuperDrive spin with the SL disc in as though it knows the disc is present but I get nothing on the screen. It is as though the screen is not on at all. I put the old drive back in and still get the same problem.
How can I troubleshoot this to figure out what is wrong or get around it? Or is this something for a more professional tech to diagnose? I fear I may have broken something when I had it open but i never recall doing anything questionable or seeing anything odd while open.
Thanks for any help.

Took it to Apple store. Logic board bad, had them replace, fine now.

[Athlon64] Problem installing ATI 9600 XT driver & Macromedia Flash on winXP 64bits final

Hi:
I installed win Xp 64 bits, no problemm during the installation, but some times, the graphic display crashes. I check for the driver that tht OS has installed by default, for the graphic card, ATI Radeon 9600 Xt, and it is a driver dated sept-2004. I downloaded the latest driver from ATI, and when installing the following error appears: Thunk.exe INF file is missing.
And the driver get not installed.
Other problem that I also have, is when using IE 64 bits , I can not install Macromedia Flash in order to display Direct X contents in some webs. Therhe is no problem when using IE 32 bits.
Please help.

Hi:
I installed win Xp 64 bits, no problemm during the installation, but some times, the graphic display crashes. I check for the driver that tht OS has installed by default, for the graphic card, ATI Radeon 9600 Xt, and it is a driver dated sept-2004. I downloaded the latest driver from ATI, and when installing the following error appears: Thunk.exe INF file is missing.
And the driver get not installed.
Other problem that I also have, is when using IE 64 bits , I can not install Macromedia Flash in order to display Direct X contents in some webs. Therhe is no problem when using IE 32 bits.
Please help.

Problems installing all new SB driv

Here is my problem, and from a can see a few other peoples problem, I have an Audigy 2 and a Li've 5., I have just reinstalled Windows XP and downloaded the latest drivers for both of these cards, I can install the older drivers no problem but none of the new drivers work, they just say no Audigy2 or Li've 5. can be found, these are on different computers and the cards both work fine with older drivers, I would like to know what is the problem with the new drivers? There clearly is a problem as many people have mentioned this, if I do a manual install it works, but the setup program has problems finding the cards.

Same problem with audigy 2...
I can download and install the EAX 4.0 Update that recognize the hardware
while i cannot install the last May update because it don't recognise that there is an audigy2 onboard....
anyone can help me?Message Edited by Moreno on 05-25-2005 :43 PMMessage Edited by Moreno on 05-25-2005 :43 PM

Installing Deskjet F2180 Driver on Windows 7

I started to install the Deskjet F2180 Driver on a new PC + Windows 7. The driver was downloaded from the Internet. I got the first installation window in Hebrew langauge, which was fine since this is the languge I wanted, but the second window had unrecognized symbols (not in any language, just giberish). I tried it again and again with different "Regional and Language options", even with English only, without any success. I don't care having the driver installed in English, but somehow the driver finds out that I know Hebrew, and tries to install the Hebrew version (with the above problem). I tried to continue the installation, but the result was that the "HP Solution Center" was displayed with question marks instead of letters.Note: I installed the Hebrew language on the Windows 7 before I started the installation process.Is there anyone that can help me?

non riesco a trovare i drive per la mia Deskjet F2180 Driver on Windows 7
mi potete aiutare con un LINK diretto? Grazie.
I can not find the drives for my Deskjet F2180 Drivers on Windows 7
can you help me with a link? Thank you.

Unable to install printer Deskjet 6122 on windows 7 (64bit)

I bought a new HP Pavilion Model HPE h8-1237c running Windows 7 Professional (64bit). I’m not having any luck at trying to install my old HP Deskjet 6122 printer. Drivers on disk and newer downloaded ones are not compatible with the 64 bit OS. HP suggests installing drivers for Deskjet 990c as alternative. That didn't work either. This new computer only has USB ports and not the old parallel one like my old Pentium 4 Windows XP computer. The printer does have a USB hookup, but windows doesn't install the printer as plug and play since there are no drivers available. I've tried installing it running Windows Virtual PC in XP Mode. The printer install software runs fine in the virtual mode until it gets to the "print test page." At that point the install fails to find any printer at which time it completely reverses the install. Pffft ! !
Help please! I've been going crazy for two days to solve this problem. I haven't even begun to attempt installing my trusty old HP Scanjet 5530 flatbed scanner. I suspect it will be a similar nightmare as is this current printer dilemma.
Am I destine to have to buy new hardware that’s compatible with windows 7 (64bit)?
This question was solved.
View Solution.

The Deskjet 6122 driver should work fine on Windows 7 using the DEskjet 990c driver, but many folks (myself included) have been having problems getting the Deskjet 990 driver to download from Windows Update.
You have probably already done the steps here, but if not start with that. If the HP Deskjet 990 does not show up after clicking on Windows Update as shown in step 8 and you get a message that "Windows Update was unable to find a list of devices, try again later" then see the solution here. If the problem still exists then you can download the driver from the Microsoft Update Catalog site, but this is not very easy to use. If you need to use the catalog site post back here and I will write up some directions.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp deskjet 2514 driver install issue

My deskjet 2514 driver will not install properly from the website or cd provided and this is very upsetting. I can't not use the printer from my laptop running window 7 at this point in time. I have runned the install wizard and troubleshooter and still can't get the driver installed and I have had no issues with a different hp deskjet1000c on my desktop running WinXP. I need to know as to why the driver is not installing at all. I saved the driver onto another cd (blank) to try it and still fails to install. How can this happen when the printer is brand new from the store and is useless.

I have the same exact problem. I get driver 82801EB 24D2 during the initial install, then I went to troubleshoot and it says it found the problem and to install again and each time it gets the same driver issue but a different ending suffix. it goes from 24D2 to 24D7 and 24Dx.

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

Hi, I have Adobe Creative Suite 5.5 Design Standard pack on CD drive and wish to install it onto my newly purchased Mac Book Air. Problem, there is no CD drive I can use.

Hi, I have Adobe Creative Suite 5.5 Design Standard pack on CD drive and wish to install it onto my newly purchased Mac Book Air. Problem, there is no CD drive I can use. Have you any suggestions for me?

You may download the product from
Download CS5.5 products

Driver issue-problem installing hardware

I installed the latest update to iTunes yesterday. Now, when I connect my IPod to my PC, I get the following error message:
"There was a problem installing this hardware-apple IPOD USB driver-An Error Occurred During the Installation of this device. The I/O operation has been aborted because of either a thread exit or an application request."
I have searched for an updated driver, but I keep getting the same error message as above. The iPod shows up in device manager, but with a yellow exclamation point next to it. It says "The drivers for this device are not installed. (Code 28)." I've also reinstalled the driver.cab file from my Windows installation disk, but none of this has resolved this issue.
Any help would be greatly appreciated.

I think I've resolved this issue. I used SYSTEM RESTORE to find a restore point from before I upgraded iTunes. When I went to start iTunes after restoration it didn't want to start, so I had to go to the Apple web site to download and reinstall iTunes. It seems to be working now though some of my music didn't initially sync from the library to my iPod because my computer wasn't "authorized" according to the error message. All I did then was attempt to play oe of the songs that wouldn't sync and I got prompted for my iTunes password, plugged that in and everything seems to have synced just fine.

Problem installing HP Printer driver hplip-3.10.9

I am trying to install the printer driver for my HP Laserjet p1102w (hplip-3.10.9.run). The program starts then stops with the error "TabError: inconsistent use of tabs and spaces in indentatiion". I did some research, but it could not resolve the issue. I think it has something to do with the way python handles tabs?? I did not have any problem installing this on my Fedora 13 desktop. Not sure how to proceed.
Thanks!

I have used the suggestions given, and I still can't get the printer driver to load. I did check the /var/log/cups/error-Log and found th following:
D[08/Nov/2010:18:17:21 -0600] [Job 25] STATE: +connecting-to-device
D [08/Nov/2010:18:17:21 -0600] [Job 25] STATE: +hplip.plugin-error
D [08/Nov/2010:18:17:21 -0600] [Job 25] prnt/hpcups/HPCupsFilter.cpp 413: m_Job initialization failed with error = 48STATE: -connecting-to-device
The following was from a Fedora bug report. not sure if it is applicable to my problem
Tim Waugh 2010-04-23 11:17:41 EDT
Description of problem:
See in error_log from bug #520200 comment #7:
D [17/Apr/2010:12:34:43 +0530] [Job 29] prnt/hpcups/HPCupsFilter.cpp 413: m_Job
initialization failed with error = 48STATE: +connecting-to-device
There is a missing newline at the end of the string output from
HPCupsFilter.cpp:413.
In fact, looking around, there are *loads* of newlines missed from dbglog()
calls. This messes up STATE and ATTR reporting, as we can see above.
Version-Release number of selected component (if applicable):
hplip-3.10.2-4.fc11
D [08/Nov/2010:18:17:21 -0600] [Job 25] STATE: -media-empty-error,media-jam-error,hplip.plugin-error,cover-open-error,toner-empty-error,other
At this point not sure what to try next

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Problem installing HP Deskjet 5700 driver on my macpro!

Similar Messages

Maybe you are looking for