Problem Installing iStudio 10g on my Laptop

I am having problems installing iStudio 10g on my laptop (Windows XP). The install is erroring out at a point where it asks for the hub information, it says "An error occurred while validating the password of the ichub schema". I know for sure that I am using the correct password, as I can connect to the OAIHUB904 schema through SQL.
Any ideas, as to why I am facing this problem.
Thanks in advance.
Regards,
Hilal

Have you tried pressing the return key?  Which Mac laptop are you using?  What are the settings you see under Resolution in the Display preference pane?

Similar Messages

  • Problem Installing OAS 10g Infrastructure on WinXP

    When installing OAS 10g Infrastructure on my WinXP Laptop the OPMN configuration assistant fails while starting the apache http server, because apache.exe fails (apache.exe has encountered a problem and needs to close...). Starting the apache http server using 'dcmctl start -ct ohs' results in the same behaviour. This is reproduceable. I know that this kind of installation in not supported. Any idea what the reason could be for this ?
    Thanks Thomas

    When installing OAS 10g Infrastructure on my WinXP Laptop the OPMN configuration assistant fails while starting the apache http server, because apache.exe fails (apache.exe has encountered a problem and needs to close...). Starting the apache http server using 'dcmctl start -ct ohs' results in the same behaviour. This is reproduceable. I know that this kind of installation in not supported. Any idea what the reason could be for this ?
    Thanks Thomas

  • Problems: install oracle 10g 32 bits on RH 5.8 x64

    Hello,
    Someone has given me an oracle 10g 32 bits to install on a Redhat 5.8 64 bits server (no other server available).
    I have a lot of errors during the installation process
    exemple:
    INFO: /usr/bin/ld: skipping incompatible /oracle/client/10x_32/lib/libxml10.a when searching for -lxml10
    /usr/bin/ld: cannot find -lxml10
    collect2: ld returned 1 exit status
    I installed libxml10 64 and 32 bits on the system !
    I would like to know if this configuration is POSSIBLE ???!
    If yes, what is the solution / process to fix these compli. problems :-|
    Thanks for your help !

    962147 wrote:
    yes i read the installprocess and pre requisits:
    But first "**is it possible to install oracle 10g 32 bits on redhat 64 bits ???* "
    yes or no ? :-(
    I've never seen any 32-bit software that DIDN'T run on a 64 bit OS, as long as the necessary libraries are installed.
    I used this process: is it the good one ?
    http://www.oracle-base.com/articles/10g/oracle-db-10gr2-installation-on-rhel-5.php
    Tim does a very nice job with his stuff on oracle-base, but that is NOT the official documentation. Why not use ORACLE'S own installation guide? Have you seen http://docs.oracle.com/cd/B19306_01/install.102/b15667/toc.htm
    And why are you installing a a version of Oracle that is out of support?
    And as long as you have a 64-bit OS, why would you want to run a 32-bit version of Oracle?
    Edited by: 962147 on 29 sept. 2012 13:06Edited by: EdStevens on Sep 29, 2012 9:22 PM

  • Problems Installing Oracle 8i on Gateway laptop W/ 1.6 GHz CPU

    I'm having problems installing Oracle 8i on a Gateway 600X with a 1.6 GHz CPU and Windows 2000 Professional. The Install/DeInstall screen appears, I click Install/Deinstall, the screen disappears, the hourglass disappears a couple seconds later, and the the install ends without any messages. I tried installing on slower machines and the software seems to install correctly. Is there an issue with Intel's new Mobile Pentium 4 processors or Gateway's laptops?
    Thanks,
    Mike

    have a look in your $ORACLE_HOME/dbs directory. If the init<ORACLE_SID>.ora file has remote_login_password=exclusive then you should also have a file called orapw<ORACLE_SID>. If you haven't, then create one by running "orapwd file=orapw<ORACLE_SID> password=internal entries=5".
    This has worked for me in the past, hope it helps.
    Stef

  • Problems Installing Oracle 10g in Red Hat enterprise 5.3

    I am trying to install Oracle 10g in Linux RH 5.3 the I get the following error
    Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-05-07_11-08-08AM/jre/1.4.2/lib/i386/
    libawt.so: libXp.so.6: cannot open shared object file: No such file or directory

    This should help you out.
    "Exception java.lang.UnsatisfiedLinkError: ../jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred" on RHEL5/OEL5 for 10.2 x86 or x86_64 install
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443617.1

  • Problem installing iTunes on my Windows Laptop

    Hi people
    Right I've had this problem for a while, I try to install iTunes but have faced problems. Im using a windows 7 64-bit advent laptop.
    Recently the error was iTunesHelper was not installed correctly as I tried installing the new itunes, and i DO NOT want to have to delete my laptop completely back to factory settings. There is no system restore in place, and I have tried deleting every file+ software associated with apple.
    PLEASE PLEASE HELP ME
    Thank you!

    Also the installer tells me that iTunes has installed correctly, but when I open it Error 7 (Windows code 14001) appears.
    When I open QuickTime I'm told that "the application has failed to start because of its side-by-sde configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail" appears.
    Please help me

  • Problem installing Premeir on Windows 8 laptop

    I run the setup program and it all starts just fine. I select the language (English) and then it gives me the "Preparing to install" progress bar. Then the installer exits and puts a text window on the screen. The window is called "Windows Installer" and the text inside is about how to use Windows Installer V 5.0.9200.16384. It looks like the command line syntax help screen for Windows Installer.
    The laptop came with Norton Internet Security and I have turned everything off that I can find shy of uninstalling it. I told it not to scan any files on the C drive.
    I have contacted Adobe Chat and they don't know what to do.
    Help!

    Adobe Premiere Elements 11. I double clicked on the setup program.  I spent 90 min on the phone this morning with Adobe support. We found that the msiexec intaller program was giving errors so we created a new admin account user and tried the install again.This time we made it all the way to installing the shared components when we received an error that it failed to install the shared components and thatwe should reboot and try again. We did that and got the same error.
    I have a Samsung touchscreen laptop purchased 5 days ago. The support agent suggested that the problem was with the OS and that I should contact Microsoft for more help.  We are considering returning the laptop.

  • Problem installing CS5 on Windows 7 laptop

    I have CS5 on my Windows 7 desktop. Now I want to install CS5 on my Windows 7 laptop. Since it's an upgrade, it won't install. I have a CS4 upgrade, and a full version of CS3. Do I need to install the full CS3 version first, then the CS4 upgrade, and then the CS5 upgrade?

    You can directly install the CS5 upgarde , no need to have the CS4 and CS3, all you need is serial Number of the CS4 to install the upgrade.

  • PROBLEM INSTALLING PHOTOSHOP CS6 ON MAC LAPTOP

    WHEN I CLICK THE INSTALL FOLDER FOR THE PHOTOSHOP CS6 ON MY MAC LAPTOP, IT WILL NOT GO TO THE NEXT SCREEN SO I CAN ENTER THE SERIAL NUMBER TO UPLOAD.

    Have you tried pressing the return key?  Which Mac laptop are you using?  What are the settings you see under Resolution in the Display preference pane?

  • Problem installing hp 8600 plus to laptop after installing wireless on desktop via cisco router!

    After installing the printer successfully on my desktop wireless through the cisco router I attempted to add my laptop a hp G60-635DX notebook. After installing the printer I got a message that a driver cannot be found! I called cisco and they offered online help for a $ 69.00 contract for 1 year! Looking for cheaper alternative!!!

    Does the Asaro run DHCP?  If so, turn off all access points except the one running DHCP and connect the printer.  Then you can turn on the other APs.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Problems installing Photoshop CS6 on New Laptop

    My old laptop had a hard drive crash and is dead.  I bought a new laptop yesterday (windows 8.1) and downloaded cs6, which I had installed on the old laptop.  When I enter my serial number, a message says that no version of photoshop was found on my computer (which is true, it's a new computer).  How do I get up and running again with cs6 on my new laptop.  Thanks!

    Have you tried pressing the return key?  Which Mac laptop are you using?  What are the settings you see under Resolution in the Display preference pane?

  • Problem - Installing oracle 10G & Developer Suite

    Dear Team
    I am trying to install Developer Suite and Oracle 10g . but unable to get into Sql. always i am getting a error . where as i changed everything in tnsnames.ora and checked the Listner. In Oracle 9i i dont get the error and very somoothly i can install and configure it . here some times it gives a error as Account Locked etc.,
    Please advice how to configure or where I am doing a mistake
    Sanjay

    Few more details about how you are connecting and which user you are using for connection would be helpful.
    With Oracle 10g, assuming that you have created a sample database on the same machine with mostly DBCA...
    here some times it gives a error as Account Locked etc.,if you are referring to ORA-28000 error, then it seems the password that you have been using is incorrect and you have exceeded the failed login attempts.
    Or you need to unlock the user in first place, since that is locked by default during Oracle installation (assuming you are referring to the sample schemas).

  • Problem installing Oracle 10g Express on Windows XP

    I have downloaded and installed the software and it appears to work (can use command line SQL). However I cannot get the browser interface to work - I have checked all of the settings mentioned in the installation notes. Ideas on how to debug/fix? Many thanks

    Hmm very funny...
    1. No error message or specific behaviour provided
    2. Look at forum section name (Linux)
    Installation section is located here:
    Database Installation
    And forum dedicated to Express edition is located under http://asktom.oracle.com

  • Problem Installing Oracle 10g on Windows 2000

    Hi all,
    I´m trying to install the Oracle 10.2.0.1 on Windows 2000 Terminal, but
    I´m getting the following error:
    java.util.zip.ZipException: oversubscribed literal/length tree
         at java.util.zip.InflaterInputStream.read(Unknown Source)
         at java.util.zip.ZipInputStream.read(Unknown Source)
         at java.io.FilterInputStream.read(Unknown Source)
         at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
         at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
         at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)Somebody know about this?
    A important information: Other person have tried to install the Oracle9i, but he've cancelled the operation.
    So, I've cleared Oracle information from regedit, but the key LEGACY_ORACLEMTSRECOVERYSERVICE
    I cannot make clear. I don't know if this can influence in installation
    thanks!!!!

    Hi all,
    Thank u for help me. Very good, but now I got other error :-(
    Error file:
    java.util.zip.ZipException: invalid entry CRC (expected 0x6d8a0210 but got 0x6cc88669)
         at java.util.zip.ZipInputStream.readEnd(Unknown Source)
         at java.util.zip.ZipInputStream.read(Unknown Source)
         at java.io.FilterInputStream.read(Unknown Source)
         at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
         at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1387)
         at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1278)
         at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1237)
         at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1192)
         at oracle.sysman.oii.oiix.OiixFileOps.copyStreamFromJar(OiixFileOps.java:1123)
    Log file:
    INFO: Exception thrown from action: copyGroupFromJar
    Exception Name: IOException2
    Exception String: Error in writing to file 'C:\oracle\product\10.2.0\db_1\jlib\oemlt-10_1_0.jar'. [invalid entry CRC (expected 0x6d8a0210 but got 0x6cc88669)]
    Exception Severity: 2I'm looking for this error, I found several solutions, but :-(
    thank u so much again!!!!
    []s

  • Problem Installing Oracle 10g Software in Silent mode on OEL6

    Hi All,
    I have created response on 32-Bit OEL6 Virtual Machine. And it worked fine when doing silent installation on 32-Bit environment.
    When i am using the same response file to setup Oracle environment on OEL6 64-Bit machine, it gives me following error:
    *[oracle@usv000322 database]$ ./runInstaller -silent -responseFile /u01/install_10g.rsp*
    *./runInstaller: /u01/database/install/.oui: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory*
    *[oracle@usv000322 database]$*
    I have installed all the required RPMs. Is there anything i am missing here ?
    Any information would be appreciated.
    Thanks,
    Srikanth

    Fran wrote:
    check if user have the privileges on that directory and directory exists.I am performing the action using oracle user and it does have all the privileges on the folder:
    [oracle@usv000322 u01]$ ls -ltrh
    total 2.0G
    drwx------. 2 oracle oinstall 16K Apr 4 01:12 lost+found
    -rw-r--r--. 1 oracle oinstall 765M Apr 13 17:33 10201_database_linux_x86_64.cpio
    -rw-r--r--. 1 oracle oinstall 36K May 14 12:11 install_10g.rsp
    -rw-r--r--. 1 oracle oinstall 1.2G May 15 16:26 p8202632_10205_Linux-x86-64.zip
    drwxr-xr-x. 2 root root 224K May 15 20:25 Packages
    -rw-r--r--. 1 oracle oinstall 51K May 17 09:41 Oracle_10205_PS.rsp
    -rw-r--r--. 1 oracle oinstall 37K May 24 14:59 install_10g_2.rsp
    drwxrwxrwx. 6 oracle oinstall 4.0K May 25 17:33 database
    And no OUI within database/install.
    Edited by: Srikanth on May 25, 2012 5:42 PM

Maybe you are looking for

  • How to display the drill through report in a new browser seperate window

    Hello All, I am working on a drill through report which should run when I select the column value from the main report. The drill through report I am working on is Centerline Validate Angles for a specific line. It has 2 parameters, Pods ID and Angle

  • Nokia S/W Updater V1.3.0en not working

    Hi ppl The latest version of the Nokia S/W updater or rather the firmware updater is not working..... The application crashes everytime it is started.... Trying to use older versions of the S/W is of no use as a message from the updater insists on in

  • SWFElements & ImageElements not unloading on set element

    I originally was using a serial element to handle the loading and unloading however due to being unable to seek on a serial element with the current code release or latest from svn (http://forums.adobe.com/thread/552041?tstart=0) I opted to set Media

  • Internal HDD no longer detected after Critical Update Windows 8.1

    After installing the critical update that was released on Jan 2015 for Windows 8.1, my internal backup HDD started acting up. First, issues arose when it took an usual amount of time to open any folder. However, after trying a few times I was able to

  • Macbook Pro (2011) has rattling audio?

    The other night, my Macbook Pro had the back left corner of the lid dented in slightly because it fell off my bed. Besides that, I didn't notice anything else wrong with it. However, just last night, I noticed that my audio starts to rattle a bit whe