Problem installing MSI P35 Platinum & MSI NX8600GT & windows XP

Hi all,
I just bought my MSI P35 platinum mobo and MSI NX8600GT graphics card.
Was trying to install XP on it. During installation, got the following error message :
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** Stop : 0X0000007E (0XC0000005, 0XF748E0BF, 0XF78DA208, 0XF78D9F08)
*** pci.sys - Address F748E0BF base at F7487000, DateStamp 3b7d855c
Then it just freezes there. Any ideas how I can resolve this ? Please help
Thanks ...

Quote from: NovJoe on 07-February-08, 00:17:44
Please post your full system specs and PSU specs amps.
Moan Guide
my system specs
Intel Pentium 4 - Intel E8200, LGA775 2.66GHz, 6MB L2 cache, 1333 Mhz FSB, 45nm
MSI P35 Platinum
3 x 1GB DDR2 Kingston 6400 CL5 800MHz
320GB Seagate SATA HDD
MSI NX8600GT 256MB
Windows XP Pro
PSU : I-CUTE ATX-450W/P4
The HDD was detected correctly in BIOS, memory also detected, Graphics card seems ok (how I can tell ?)
rgds

Similar Messages

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

I have a problem installing Adobe elements premiere 9 using windows 8.1

I have a problem installing Adobe elements premiere 9 using windows 8.1, it just says that it did not install and no files were changed. is this program compatible or is it yet another bin job?
H E L P

miked
I have Premiere Elements 9.0/9.0.1 installed on Windows XP 32 bit, Windows 7 64 bit, as well as Windows 8.1 (previously 8) and no problems.
Are you installing the program from installation files (purchased as a download to a Windows or Mac computer??) or from installation disc labelled for Windows?
After the program is installed, then you install the Premiere Elements 9.0.1 Update and work from it.
Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
More details first before we go changing any compatibility settings.
Thanks.
ATR

Problems installing SQL Server 2014 Dev on Windows 7 64 bit

I just purchases Microsoft SQL Server 2014 Dev edition from the Microsoft store, downloaded the 64bit version, and tried to install it. The install fails consistently on the Install File Setup (after the product code and accepting the license) with
the following error:
The following error has occurred:
Unable to open Windows Installer file 'D:\SQL2014Dev\Sqldev_eng_mar14\redist\VisualStudioShell\VC10SP1\x86\vc_red.msi'.
Windows Installer error message: 1: 2203 2: D:\SQL2014Dev\Sqldev_eng_mar14\redist\VisualStudioShell\VC10SP1\x86\vc_red.msi 3: -2147286960 .
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
My system is running Windows 7 Home Premium x64, which looks like it's supported for this product.
Does anyone have any suggestions?

Hi
Please make sure firewall is turned off when you are installing SQL Server. Also make sure you are not installing from CD drive, install it from Local Drive.
For such issues MS has released support article to fix any missing installer. You can refer to below support article
https://support.microsoft.com/kb/969052?wa=wsignin1.0
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Problem installing Oracle forms and report in windows 7

I have a problem while installing Oracle forms and reports in windows 7 64 bit
The error is : [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IY5_e_EApIRMyYAhMG1BuDGr00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
So I Google for it and found that this is version mismatch (May be I am wrong) and it tells that I have to install WLS - 10.3.2 with ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
But I am unable to get wls version 10.3.2.
For better understanding I am listing my installers :
(I) Windows 7 Ultimate 64 Bit
(II) (Oracle 11g) win64_11gR2_database (1 & 2)
(III) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
(IV)wls1033_generic.jar , wls1033p_generic.jar , wls1035_generic.jar
(V)accessbridge-2_0_2-fcs-bin-b06
(VI)ofm_rcu_win32_11.1.1.2.1_disk1_1of1,ofm_rcu_win_11.1.1.3.1_disk1_1of1
(VII) ofm_wc_generic_11.1.1.5.0_disk1_1of1
(VIII)jdk-6u38-nb-7_2_1-windows-i586-ml , jdk-6u38-windows-x64
(IX) oepe-wls-indigo-installer-11.1.1.8.0.201110211138-10.3.6-win32
(X)wls1033_oepe111150_win32.exe
(XI)wls1035_win32.exe
(XII)wls1035_oepe111172_win64
(XIII)oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win64
After the installation while configure the forms reports, I am stuck while creating domain.
steps I follow is :
(i) Install Windows 7 Ultimate 64 Bit
(ii) (Oracle 11g) win64_11gR2_database (1 & 2)
(iii) wls1033_generic.jar
(iv) accessbridge-2_0_2-fcs-bin-b06
(v)ofm_rcu_win32_11.1.1.2.1_disk1_1of1
(vi) ofm_pfrd_win_11.1.1.2.0_64 (1 to 4)
Please any body help, for the installation of oracle forms and reports.
I have a formatted Windows 7 Ultimate
Where I have installed Adobe Acrobat Reader
IIS server from windows installer
Now I want to know the exact procedure so that i can run the forms and report in my machine.
This is my first installation of Oracle forms & Reports, so please do not pre assume about my understanding (Like "to install this he surely did this environment settings" )
Please specify all the steps
Furthermore if Another software I have to download then please tell me.
And I will be grateful if you specify the mistakes in my side.
Looking forward with anticipation.

Solved, Thank you

Problems installing Oracle Developer Suite 10g in windows 7

Hi Experts;
I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and I couldn't see anything, may be the name is diferent.
Thanks for your help.
Al

First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product. While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit). This is a commonly asked question so a search of the forum would have given you several solutions.
The limitations of the Oracle installer are:
1. You must have Administrator rights to install.
2. Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
3. It's unable to recognize Windows Managed virtual memory.
To get around these limitations you must do the following:
1. Modify your Virtual Memory settings and define a specific Min and Max amount. Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
2. You must run the Oracle installer in compatibility mode for Windows XP. To do this,
- Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
3. While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
Now run the Oracle setup.exe and your installation should succeed.
Craig...

Problem installing NW2004s ABAP Trial version on windows vista business

Hi Gurus,
I am trying to install NW04s Abap trial version on Windows vista Business edition when I click on installer it's giving error "Precondition failed" . I wonder If we can install NW04s on win vista business edition.What version will work on vista business edition.
Please guide me how to install R/3 and BW on my PC which has windows vista business edition installed on it.
I would appreciate If anyone can help me out in this problem.
Thanks,
sat

Hi Sat
As far as i know presently vista does not support NW04s.But in future the NewYork version of netweaver will be supported by vista.
Reward poinst if usefull

Problems Installing Java Studio Enterprise 8.1 - Windows Vista

I am entirely new to the Java language and environment. I am trying to install the JSE 8.1. First I installed JDK 6.4 (jdk-6u4-windows-i586-p.exe), which seemed to go OK. Then I attempted to install the JSE (jstudio_ent81-ml-windows.exe).
First, it did not find a JRE and prompted me to specify, which I did (specified the java.exe within the JDK (Program Files/java/jdk1.6.0_04/bin). The installation continued for a while and then it tells me that "it cannot run the installer in graphical mode - check the DISPLAY environment variable". At this point is closes and that's the end of it. I see no trace of either the JDK nor the JSE in the Start/Programs folder.
Am I doing something wrong? Is Vista a non-starter?
Thanks,
Kevank

Kevank,
Thank you for trying out Sun-sponsored Java developer tools. However in the case of Java Studio Enterprise (JSE) there are two issues here:
1) JSE is not supported on the Windows Vista OS and probably will not run correctly even if it were installable, see http://developers.sun.com/jsenterprise/reference/docs/jse8_1/sjse_relnotes81.html and
2) The latest Java developer tools technology is to be found in the free NetBeans 6.0 IDE at http://www.netbeans.org/ . It is strongly recommended, especially if you are a developer new to Java, that you start out using the NetBeans IDE, which is not only supported on Vista (see http://www.netbeans.org/community/releases/60/relnotes.html#system_requirements ), but also contains the Java Enterprise application development features found in JSE, see http://www.netbeans.org/features/ .
If you have any questions on this please feel free to let us know on the forum.
Regards,
-Brad Mayer

Problem Installing SCCM 2012 R2 client on Windows Thin PC 7 (Windows Embedded)

Hi, I'm trying to install SCCM 2012 R2 client on Windows thin pc 7
I check the ccmsetup.log and it returned this:
Failed to get list of protected volume: List pointer is NULL (3)
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
DetectEWF failed with 0x80070003. ccmsetup
07/08/2014 08:06:26'' 2040 (0x07F8)
DetectWindowsEmbeddedWF failed with 0x80070003.
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
A Fallback Status Point has not been specified. Message with STATEID='304' will not be sent.
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
Cannot install over embedded OS with WF enabled on the system drive.
ccmsetup 07/08/2014 08:06:26''
2040 (0x07F8)
CcmSetup failed with error code 0x80004005 ccmsetup
07/08/2014 08:06:26'' 1960 (0x07A8)
Can somebody help me?
Thanks
Renzo
PD: Sorry for my bad English

Cannot install over embedded OS with WF enabled on the system drive.
You have to disable write filters on that device first.
Torsten Meringer | http://www.mssccmfaq.de

Problems installing MSI GeForce GTX660 Twin Frozr OC video card

I recently built my first gaming computer and everything worked...... except installation of the MSI GeForce GTX660 Twin Frozr Gaming OC video card. I have an MSI Z87M Gaming motherboard and an Intel i5 4670K processor. Running Windows 7 Professional and 8 GB Crucial Ballistix Sport RAM. I've tested the card on an older machine with a first generation PCIe slot and it installed and worked fine. When I install it on my computer everything is fine until I turn the computer off and reboot, and then nothing comes up on the screen. Are there some BIOS settings I'm missing or some conflict I don't know about? - Kennard

Add card's S/N and a copy of the current vbios (save it to file, upload it to some filehoster and add link). Also list the bios version the board is at.

Problem installing Crystal Reports 2013 on a Windows 2012 R2 server

Sheesh. One of my users needs crystal reports and still uses it weekly. It's time to update off of an old 2003 server so I setup a new Windows 2012 R2 server so that she and others can RDP into it and use the application and reports (it's a payroll thing so they want limited access).
So - totally plain vanilla Windows 2012 R2 install. Then make sure I have all the .net stuff installed in the windows features.
But, whenever I run the setup.exe from the downloaded ZIP file from the sap store I get:
(1) "Assertion failure: A fatal error has occured which has caused the installer to quit. Please gather any %TEMP% and installer logs to present to your support personnel."
(2) Then followed by the message:
Microsoft Visual C++ Runtime Library -- Runtime Error! Programs: C:\install\CrystalReports\setup.engine\SetupEngine.exe This application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information.
(3) Then:
Problem signature:
Problem Event Name: APPCRASH
Application Name: SetupEngine.exe
Application Version: 60.0.0.62
Application Timestamp: 543416b3
Fault Module Name: SetupEngine.exe
Fault Module Version: 60.0.0.62
Fault Module Timestamp: 543416b3
Exception Code: 40000015
Exception Offset: 00131ee9
OS Version: 6.3.9600.2.0.0.272.7
Locale ID: 1033
Additional Information 1: ee59
Additional Information 2: ee59ff165b01a7b873dafe8afa2598dc
Additional Information 3: f1a8
Additional Information 4: f1a876ca1cb1cf9f6541ac072dd70f88
I can't find any information on this! I have found a similar message that refers to a 2011 install that was fixed with a SP9? But this machine has no current install. I did buy the full version two days ago online from the sap store.

There is an older C++ library that you need that is not available by default on Win 2012. You can get the install for this here:
Download Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC Security Update from Official Microsoft Do…
Also, be sure you're logged in with Administrator rights, the right-click and "Run as Administrator" when you run setup. You might also have to turn off the Windows Firewall when you run the install (you can turn it back on again after the install is complete.)
-Dell
Message was edited by: Dell Stinnett-Christy

Problems installing 10G (r 10.2) on Windows 7 64-bit

Hello. I am taking an introductory Oracle SQL class. The professor gave us a link to install Oracle 10g release 2, which I followed and performed on my Windows 7 64-bit laptop. The installation seemed to run through okay. When asked (again, per instruction), I created a database named CIS276 (the class name) instead of "orcl" as suggested during the setup. I am having problems getting connected to the database, however, and since the class is online, I can't go to our campus to sit down with the professor to work out where the trouble is, so I'm hoping somebody out here can help me. Here's where I am:
I am able to get to the Enterprise Manager through the loopback address and port that was given to me during installation. I am able to log into EM using the SYS account with the password I entered during install. I get to a screen that has a button labelled "Startup/Shutdown." When I click that button, I am taken to a screen asking for Host credentials (OS account name and password) and database credentials (I use "SYS", the password I created, database is already filled in, and "SYSDBA" for "Connect as"). After entering this information, I click on OK. I get an error message at the top of the screen saying: "Couldnot contact the agent. Verify that the url for the agent is null." I looked up this string and a suggestion was to run " lsnrctl status"--I think (I've been trying a lot of things over the past couple of days to try to get this running) and the program replied that the environment variable "ORACLE_SID" wasn't set. I looked up what I was supposed to do and went into Windows 7 Environment area and set the value.
I rebooted the computer and tried again and am still getting the same problem. So I Googled the error message again and saw a suggestion to stop and restart dbconsole. When I did that, I got an error (stopping and starting) telling me that I was denied access.
At this point, I felt I'd better stop and get any suggestions from more experienced Oracle users. If anybody could give me some suggestions as to what to try next, I'd truly appreciate it.
And one other question: when I followed the link to download Oracle, there was another download listed called something like "Companion Disk 2". Is this a necessary download or is it just extra stuff that I may not use for now?
Thank you again.
Eric S. Bauman

Hi Eric,
I thin your problem is not related to Operating System. Right now I also use Windows 7 64 bit. and the oracle database that i used is Oracle 10g (10.2.0.3) for windows vista 64 bit. still up and running good.
"I am able to get to the Enterprise Manager through the loopback address and port that was given to me during installation. I am able to log into EM using the SYS account with the password I entered during install. I get to a screen that has a button labelled "Startup/Shutdown." When I click that button, I am taken to a screen asking for Host credentials (OS account name and password) and database credentials (I use "SYS", the password I created, database is already filled in, and "SYSDBA" for "Connect as"). After entering this information, I click on OK. I get an error message at the top of the screen saying: "Couldnot contact the agent. Verify that the url for the agent is null." I looked up this string and a suggestion was to run " lsnrctl status"--I think (I've been trying a lot of things over the past couple of days to try to get this running) and the program replied that the environment variable "ORACLE_SID" wasn't set. I looked up what I was supposed to do and went into Windows 7 Environment area and set the value."
from your problem let's do it one by one:
to run lsnrctl, from windows desktop--> click start menu -> on search program and files box type cmd, the start menu will change its appearance and it will show you black icon with names cmd.exe do right click on that icon then choose run as administrator. It will open DOS command prompt for you.
on DOS prompt type : set ORACLE_SID=<your database name>, example : set ORACLE_SID=orcl then enter
now you can execute your lsnrctl status from the prompt.
in case you need to start listener you can use : lsnrctl start from previous DOS Prompt or you can start it via services.msc as follow : from windows desktop--> click start menu -> on search program and files box type services.msc then enter on window that open find oracle<oracle_home>TNS listener services then double click this services click on button start.
as for the agent problem is not running try to check the services with names oracleDBConsole<dbname> is it run or not.
hope it helps.

Problems installing update PS CS5 on new Windows 7 laptop w/ prior PS vers. already installed

Hi,
When I first got my new Windows 7 laptop, I tried loading PSCS5 onto it, but since it was an update disk, and previous versions weren't there, it didn't load. I finished my work during a 30-day trial period on a recent sabatical, I uninstalled it and all PS files except images saved, and have now gone through the following process in attempt to load it:
1) Loaded PS 6.0 from a CD and serial number that I own--no problems
2) Loaded PS CS2 from a CD and serial nuimber I own--no problems
3) Loaded PSCS5 from an update CD also purchased, and got an error message saying something about CS4 needing to be uninstalled before CS4 could be properly loaded.
Puzzling because A: I never loaded CS4, and B: was not trying to. So I uninstalled everything conceivably troubling from Adobe, even Flash Player, Patch files, but not ASA or Adobe Download Helper. Some Adobe files left behind I deleted and emptied the recycle bin and restarted over several different times. To my knowledge, my CS5 has only been used on one other computer. Do I need to de-activate it on the other one? I don't find it on a 3rd computer, but if it was simply uninstalled, without de-activation, would I need to re-install it to deactivate it on the 3rd one. I'm hoping somebody can help me tell how many computers have CS5 activation.
Now, I've tried simply loading the CS2 disk and going to the PSCS5, and that failed, so I re-did steps 1-3 after purging also Lightroom3 and DreamWeaver CS3, thinking something from them might've been the culprit (though they earlier loaded flawlessly after a de-activation of DW on another computer). This time the Adobe Support box came up and after searching the system or whatever, said 'no problems could be found', and that I should contact Adobe Support. No FAQ's address this problem and a scan of forums was not helpful. So here I am.
Any ideas? If it is lack of a Registry entry, it would be helpful to know exactly which one and how precisely to get it and patch that into Windows 7 for those of us who are not IT geeks. I'm guessing this might be a recurrent issue and it would be helpful to simply have that code to patch in, if it is known.
Otherwise, I'm stuck using CS2, which while OK, is not CS5.
All my Adobe products have been purchased originally purchased and activated by me.
Thanks for any help,
Michael J Kissane

Hi Jeff,
After reading your mail, I've un-installed the previous versions now
(both 6.0 and CS2), including manually some files listed as
impossible to uninstall under the PS 6.0 wizard (Adobe Program files
x86, something). I restarted the computer (Lenovo running Windows 7
Home Premium).
I then tried to run the PS CS5 Upgrade disk directly and it failed
with suggestion to go to the ASA, which said quickly "Inspection
could not identify any issues. Please contact Adobe Support for
further assistance"... and the website for same.
I recall I did get a box with a request for the qualifying
prerequisite's serial when I first tried this in December, but not
having that on hand and after failing (I believe I even tried getting
serials from 'My Adobe' resource) I punted and went for the trial
period to finish my project. The rest I've written about in my forum posting.
I'm hoping info from Maggie_8 from the forum
http://forums.adobe.com/message/3880631#3880631 may get me through
it. Otherwise, I don't know if I can save what's on the new laptop to
an external HD and start all over after back tracking to a previous
point (this was possible in older Windows OS, I recall, but one lost
anything not saved elsewhere as the clock was turned back, so to speak)
Frustrating...I had problems with Adobe Reader, too, and I hope I've purged it.
Will persevere, but without wasting eons of time. Other fish to fry
and all that...
-Mike

Problems Installing ColdFusion 9 (64 bit) on Windows 7 and IIS 7.5

Problem: Empty response for static Files including images, CSS and js files. The response code is 200 OK, but there is no actual response (it's empty).
The ColdFusion Administration web site works correctly except it's not displaying any images, css and js. Why it is serving up dynamic content and not static is a mystery.
Installed ColdFusion 9 (64 bit) Multiserver Option on Windows 7 running IIS 7.5.
I have verified that IIS 7.5 is correctly configured for Static Content for both the handler mappings and the modules.
The Configuration for IIS 7.5 install looks like this:
The ColdFusion web configuration tools shows that it is connected to all instances of IIS.
I have uninstalled ColdFusion9 and IIS 7.5, and reinstalled many times but get the same problem: Empty responses for Static Files.
Help is appreciated.

To Clarify the blurry picture, this is what the IIS 7.5 install options look like:
Web Mgmt Tools > II6 Mgmt Compatility > IIS Metabase & II6 Compatability
WWW Services > Application Dev Features > .Net Extensibility and ASP.Net and CGI and ISAPI Extensions & ISAPI Filters
Common HTTP Features > Default Document and Directory Browsing and HTTP Errors and Static Content
Security > Request Filtering

Problem installing NW2004s ABAP Trial version on windows xp pro SP3

Good Day.
I have drawbacks installing Abap Trial SP12. When it comes to 89% ends abruptly.
I set up MS Loopback Adapter. The operating system is Windows XP Professional SP3. 1Gb RAM. Disk Space 50Gb Free.
I have installed thousand and once and presents the same mistake. I have followed the procedure to uninstall the MaxDB, Stop service SAP, Clear Folders installed and clean record with RegCleanTool. And nothing, I am grateful for the help they can give me.
Thank you.
(May 27, 2008 7:13:42 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 27, 2008 7:13:42 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllInstallationSteps(StepWrappe rInstallFiles.java:177)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.install(StepWrapperInstallFiles.java:2 68)
at com.installshield.product.service.product.PureJava ProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.getResultForProd uctAction(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitInstallableComponents(Unknow n Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOpera tion.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(May 27, 2008 7:18:44 PM), Install, com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(May 27, 2008 7:18:44 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.execute(StepWrapperInstallFiles.java:2 54)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllSteps(StepWrapperInstallFile s.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.executeAllUninstallationSteps(StepWrap perInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperI nstallFiles.uninstall(StepWrapperInstallFiles.java :313)
at com.installshield.product.service.product.PureJava ProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.processActionsFa iled(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitInstallableComponents(Unknow n Source)
at com.installshield.product.service.product.Installa bleObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJava ProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOpera tion.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Problem solved.
I had installed.
- Windows XP Pro SP3
- Java Runtime 1.6
The uninstall and install the following.
- Windows XP Pro SP2
- Java Runtime 1.5
Thanks.

Problem installing MSI P35 Platinum & MSI NX8600GT & windows XP

Similar Messages

Maybe you are looking for