Problem installing new ACR using LR3.4.1 and CS5
I've received error messages when I try to Edit In Photoshop, telling me that I need to update my ACR in order to proceed. I get almost all the way through with the installation (having closed LR3 and CS5) when I'm told to close Bridge. I don't use Bridge and it has not been opened at any time during the attempted installation. I'd appreciate any help that would allow me to complete the installation. Thanks.
Please read responses from other forum members more carefully – I fully understood what you said in the original post and did provide a useful suggestion.
You should identify the operating system you are using on any post. I'm guessing you are a Mac user, since we have already explained about Window's system tray, which is now called the 'notification area' on Windows 7. The following link has information on how to setup Adobe Bridge for both Windows & Mac systems so that it doesn't automatically launch at startup. This is most likely the cause of the problem you are experiencing! NO, you will not see the Adobe Bridge application because it is running in the background!
http://help.adobe.com/en_US/creativesuite/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-736 da.html
In the Adobe Bridge Edit>Preferences>Advanced dialog box, unselect the option for 'Start Bridge At Login.' Restart your system, since there does not appear to be a graceful way on a Mac to "stop" Bridge when it is running in the background. From hence forward, Bridge will NOT automatically launch, nor prevent you from loading software updates, etc.
If this does not resolve the software update problem please let us know – We will try to provide further assistance.
Similar Messages
-
I am having problems installing new software for my ipod
I keep getting a message that the network has timed out.
I have tried two different computers and networks what else can I do?Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
Problem installing new email and calendar update o...
hello nokia, i have problem installing new email and calendar update version 3.6 (5) in nokia 701 fp2...i have download it when it appears in my software update and after download installation start and i waited for the installation to finish up but the phone switch off its self ...phone starts again n again i try to install but the phone switchng of itself ...i try many times but it didn't work...so need help guyz love nokia thnkz
Confirmed!
It's an anti-virus related issue. First tried to disable only protection, firewall, etc., but it did not work fine.
As suggested, so I deleted KMS (but keeping the application settings and objects in quarantine), and was finally able to complete the installation of the update.Then installed again KMS and everything still works fine.
No experience of Wi-Fi issues.
Nokia 700
113.010.1506.C00.01 - FP2 -
I have a Nokia N86 8MP
I have a problem installing new apps to the phone
Here is the process i follow
1. Send app from OVI store to my phone - Successfully
2 . Text message received containing download link
3. Open link - Link opens successfully
4. Click on download button
Now this is were the problems start
Nothing downloads and the screen just goes back to the text LINK
Any help would be great
Regards
DaveNow sorted -
-
Having real problems installing new software I have been on the updating I cloud screen now for over hours has anyone else experienced this?
Glad I am not the only one its frustrating
-
I transferred CS5 to a new computer using PC mover ultimate. CS5 appeared to start up normally, I had to insert the serial number from my original CD. However, now the program does not recognize CR files and Adobe bridge is not working properly. I get messages that CS5 needs to be updated, but the updates fail. What should I do? Should I uninstall CS5 on the new computer, uninstall CS5 on the old computer using the original CD, and then reinstall CS5 using the CD on the new computer?
Transferring programs does not work well with Adobe applications. You should install them.
As far as having the program on different machines goes, you are allowed to have two activated installations so if it is working on the original machine there is no reason to remove it unless you need the space. -
When Apple solve problems with new iTunes calendar sync with windows and outlook?
When Apple solve problems with new iTunes calendar sync with windows and outlook?
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
More Info here...
Apple ID FAQs > http://support.apple.com/kb/HT5622
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I installed new 11.1.4 iTunes update and it took out my USB ports on my MAC and will not now power or connect my Itouch or iPhone to iTunes
Now my Iphone is connnecting but my Itouch is not connnecting since 11.1.4 update. Come on and fix problem from your poor update.
-
What happened to my power pc it worked fine i tried to install new osx now it does this and woot load my orginal tiger disk
Hello, what OS did you try to instal & what exact Install Disc did you use? Maybe the 2z691-****-A number of the Disc?
-
i installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now
Try a reset to begin with. hold down the Sleep and Home key until Apple logo appears on the screen.
Regards,
Steve -
Installed new sw to my apple tv and the selection of films disapair?
Installed new sw to my apple tv and the selection of films disapair? What is wrong?
Welcome to the Apple Community.
Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
Having problems installing Canon MG3170. Anyone have any solutions? Here is what I have tried:-
-Installed from provided Canon disk, firstly with wireless connection, then using USB connection. Printer could not be added because the Macbook returns that the software is not available from Apple for both types of connections.
-Uninstalled software from the Canon disk, checked for software updates, then downloaded drivers (printer and scanner) from Canon Website. Again tried to install using wireless connection then USB connecton. Printer could not be added because Macbook returns that the software is not available from Apple
-Uninstalled drivers downloaded direct from Canon Website and plugged printer into Macbook using USB, Macbook recognised the printer and searched for the software, again Macbook returns that hte software is not available from Apple.
Help!nrg adjusta,
Sorry it took me a while to repsond, Ive been pretty busy with school and work. But for my hard drive problem, I did hours and hours of more research and trying countless ways of installing and tweaking things in my laptop and absolutely nothing worked that I could do. It was very irritating because I felt like I was so close to fixing it and I was just missing a step somewhere. Though It still boggles me why the disk utility shows a different capacity for the HD's. One thing I'm going to try next is replacing the hard drive cable that goes from the internal HD to the macbook. I read somewhere that sometimes those can go bad over time, and also if you get a new, modern hard drive, sometimes the old cable (for some odd reason) might not be compatible with the new HD. So i want to test it out for myself to see it that is the actual culprit.
http://www.ifixit.com/MacBook-Parts/MacBook-Hard-Drive-Cable/IF186-018
Once I get the cable and install it I'll let you know the results and if it helped at all.
Have you made any progress on your hard drive at all? If worst comes worst for you, you can probably get a SATA to USB cable and try to reformat it that way (this is the way that worked for me, but the only problem was it wouldn't be recognized when I installed it internally. Thats why i want to try getting the new cable), and if it still wont recognize it after that, you can just leave it outside of your mac, and just boot from that. The only thing that ***** about that is you have this big hard drive handing off the side of your mac when ever you need to use it.
Heres a link for a SATA to USB. this one is good because is compact and protects the HD from damage and most static electricity.
http://www.thinkgeek.com/computing/usb-gadgets/e6d9/?srp=3
Im still continuing my search for the answer and once i find it (if ever!) I'll post it. -
Problems installing new hard drive - pt. 2
Hi there,
I have been using a G4 for years for my music (Pro Tools). I had the standard 29GB hard drive, and I had added a second 40GB drive, and those worked well for me for years.
A few weeks ago, the system started acting up, and it seemed like the 29GB hard drive was shot. So, I got a new one (320GB) and installed it, setting it as Master and keeping the old 40GB one as Slave.
I tried to install both OS9 and OSX on the new drive, but had problems (as chronicled in this previous thread: http://discussions.apple.com/thread.jspa?threadID=2478863&start=0&tstart=0).
After trying a number of things, I finally got 10.3 loaded and seemingly working. Then, I realized my old Pro Tools disc needed OS9/Classic to load, so I looked around for info on if I could load OS9 without disturbing my 10.3. I tried booting to the old OS9 disc -- I didn't actually do anything, like initialize, reinstall, or anything, just looked around to see if it was possible -- and now the 10.3 isn't working either.
Neither the OSX installer, the OSX Disk Utility, or the OS9 Disk Utility seems to "see" the new drive now.
Any thoughts/theories/suggestions on what it might be? Just before the 10.3 installed successfully, I had opened the computer and pressed the IDE cable connections down, just to make sure they were secure. I don't know if that did anything, but it might have.
Now that I'm having problems again, I have of course checked those IDE cable connections again, but the computer still doesn't "see" the drive.
I will remain calm...Some earlier PowerPC Macs need to have OS X installed on the first 8 GB of the HDD. Mac OS X: Disk Appears Dimmed (or "Grayed Out") in the Installer. I am not sure if that is the case with your computer, but it might be a factor.
On the other hand, if you previously had both OS 9 and OS X installed on the HDD without an 8 GB partition the issue may be elsewhere.
Try this:
Format and Install OS 9
This process will completely erase everything on your Hard Disk Drive. Be sure to Backup your User Folder and all third party apps you can't afford to lose
• Boot from your OS 9 install CD holding down C key.
• Go to Drive Setup and reformat your drive as Mac OS Extended (HFS+)
• Reinstall OS 9
• Update to 9.2.2: Mac OS 9: Available Updates
• Update your firmware
Install Panther OS X 10.3.9
• Boot from the 10.3.x install CD 1
• Go to Installer Menu and open Disk Utility
• (Optional)Go to File menu and Repair OS 9 Permissions!
• Quit Disk Utility.
• Launch Installer
• Select Destination disk for installation
• Click Options
• Select Installation Option Archive and Install
• (Optional) Preserve Users and Network Settings
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
• Check box to install BSD Subsystems (Panther & earlier).
• Install Mac OS X 10.3.x
• Restart and Repair permissions (Applications > Utilities > Disk Utility)!
• Download and apply the 10.3.9 Combo Update
• Restart and Repair Disk Permissions as previously!
• Run Software Update and apply all updates available
• Repair Disk Permissions (Applications > Utilities > Disk Utility)!
cornelius -
Problem: installed new hard drive but can´t boot from leopard dvd
So I just installed a new hard drive in my ibook G4. At first I started up the computer using the leopard DVD I had purchased. Got to Disk Utility and after a few seconds in the spin wheel came up and froze. So, I shut the computer down and when I tried to boot it again from the DVD I wouldn´t even reach the apple screen. Tried it a few times unsuccessfully.
As an alternative I just tried booting the comptuer using the original CD and it did read it.
I am currently at the installer page but I am concern about installing the old CD as I really would like to run the leopard dvd 10.5.
Is it that my ibook g4 can´t be booted from leopard dvd?
Please advise. thanks!!OK, so I decided to leave my computer resting all night and give it a new try this morning.
This morning I was able to boot from the Leopard DVD, so I don´t really think it is a problem with my superdrive. Started to format at 32 minutes to complete. Then towards the 10th minute the spinning wheel appeared, I heard the fan running, then it stopped and then I heard the superdrive making some reading noises. Then all noises stopped and now the spinning wheel continues..not sure what to do now.
In the meantime, I wanted to share also another problem that I´ve been having for quite some time which I don´t know if it is related to my current problem. It is with the computer power:
- I´ve been experiecing load surges that take my computer from 100% to 1 or 0% and then goes to sleep or shuts down. The same thing happens when I am charging the computer.. it starts charging and showing 2 or 3% charge and then jacks up to 100% in minutes.
- My computer also makes like a slight humming noise sometimes when the ring around the power cable is in orange color, so I move it around until it stops. When I do that sometimes it goes from orange to green eventhough it is not fully charged. There has been times that under green it appears to be charging (battery charging icon on desktop shows up), and other sometimes like right now when it is in green color and the battery icon on the desktop says ´99%´. Weird enough, once I get the cable in a certain position it enables the battery to charge, if I keep it without moving it, the load surges disappear (at least for some days).
Should I try resetting the PMU? I´ve not done it because I don´t know what consequences it may have.
NOTE: When I bought the computer I never calibrated my battery because I was (and still are) clueless when comes to computer technicalities. I tried using a different power adapter and get the sample problem.
Below is the information I get from coconut battery:
My battery is in its 256 load-cycle. current battery capacity 58512mAh (original battery capacity: 4400 mAh).
The last system profiler I was able to pull shows:
Battery Information:
Charge Information:
Charge remaining (mAh): 58320
Charging: No
Full charge capacity (mAh): 58512
Health Information:
Cycle count: 256
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 16250
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Dynamic Power Step: Yes
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
AC Charger Information:
AC Charger (Watts): 26
Connected: Yes
Charging: No
Any help is greatly appreciated.
Thanks a bunch!!! -
Problems installing new flash player
im having problems installing the latest flash player. the
first time i tried my internet protector blocked me and i pressed
deny by mistake, i restarted my computor and tried again but this
time nothing happens, and thats it, i cant download the
installations program.
can someone help me?I'm having the same problem. I go to update my Adobe Flash
Player @ the web address:
http://www.adobe.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash
Then I click on the Download and Install button, and it takes
me to:
http://www.adobe.com/shockwave/download/flash/trigger/en/1/index.html
which ends up taking me back to where I started.
So, I cannot download the new flashplayer either. That makes
YouTube off-limits, which sucks.
Maybe you are looking for
-
How do i install OSX 10.5 on Firewire HD?
Hello, it is possible install osx 10.5 leopard on my firewire HD? thx
-
My Adobe Creative Cloud apps won't work
I just installed the apps from Adobe Creative Cloud. When I launch the apps they'll start up but they'll close right after. Does anybody have a idea what to do?
-
Sending a pdf file using submit without client email program.
I need a solution on sending a completed pdf file to my email address without the clients email program poping up. My website has a small pdf file that users can complete and return to me. I get many complaints from users stating it requires them t
-
ORA-22275: invalid LOB locator specified in a function
Hello all!!! I am having a little problem with a function that returns a blob... When I call the function, I get that error... Here is the function (I took all the exception management code to clear it up a little...) <CODE> FUNCTION f_getfileblob (p
-
Notebook HP Probook 6560b not booting when my book essential is plugged in.
Dear sirs, My laptop will not boot when the my book essential is plugged in. The facts MY book essential 3.0 TB HP Probook 6560B My book works well, is installed in windows and works perfect. Drivers are up to date. However when i want to boot