Problem installing OSX 10.4 from Firewire DVD drive

Hi, I'd be very grateful if anyone can help... I've been trying to install OSX 10.4 from DVD loaded in an external Firewire Lacie DVD drive and haven't been successful yet. I have tried instructing startup from the DVD in System Preferences, holding Option on startup and selecting the DVD and also holding 't' on startup, which I was informed forced startup from an external Firewire device (this resulted in a large Firewire logo floating round the screen but after 10 minutes or so hadn't progressed into full startup). Having read some bits of info found on Apple support I can see there is some issue about installing OSX 10.4 from a DVD drive other than an internal Apple drive (although I can't see any explanation why). Could someone please let me know if there is another way of doing this? – I mainly want to get 10.4 installed because I want to get a new ipod which requires 10.4 rather than 10.3. Thanks very much, Sam

Some external DVD drives support startup. Some do not.
Holding down the T key at startup makes the Mac go into FireWire Target Disk Mode. It will not help you start up from the DVD drive.
If you have another Mac with FireWire and a DVD drive, you can use FireWire Target Disk Mode to mount your Mac's hard drive on the other Mac's desktop. Then, you can use that other Mac to startup from the DVD and run the installer, pointing to your Mac's hard drive for the installation.
http://docs.info.apple.com/article.html?artnum=58583
I don't know of any other way, if the external DVD drive does not support start up.

Similar Messages

Can't re-install Leopard(10.5) from external DVD-drive...

I'm trying to wipe my hard drive and re-install OS 10.5.5 from the start up DVD's apple sent me. The internal drive is broken and will not accept discs so I had to buy an external USB DVD drive. When I insert the disc and start the install process the computer restarts and stops doing anything when it gets to the gray Apple screen(there is a spinning dial just under the apple sign). The computer stays there till I turn the computer off.
Why can't I re-install? I've tried holding the option key on start up but all that comes up is the hard drive icon, when I click on it it goes right to the desktop.
Is this caused by the External drive?
Thanks for any help you can give!

Check this link and see if your Mac fits the requirements (most information can be found in Apple Menu>About this Mac)
http://support.apple.com/kb/SP575
If it's the Macbook you have listed in your signature it will run Snow Leo just fine.
Or just check to see if it has these things:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation

Can you install Mac OS X from external DVD drive?

Hi gang,
My DVD drive in my laptop is busted, so I was hoping to install SL from an external drive. Possible? Also, does the install work using the virtual DVD drive with a MacBook Air?
Cheers!

My DVD drive in my laptop is busted, so I was hoping to install SL from an external drive. Possible?
Yes.
does the install work using the virtual DVD drive with a MacBook Air?
Yes.
(46872)

Problem installing windows 7 boot camp(cd/dvd drive)

This happens right away after clicking to install now(see picture). The window takes me to where it has to find a cd/dvd drive and it can not find any. I can't advance further into the installation because of this. Anyone got any clues as to how I can fix this?

This happens when Win7 doesn't seem to have the right hard disk controller driver for your setup.
Might be that you somehow got a bad burn in (which can happen on occasion) or that the disc is damaged or dirty.
What I've also seen happen, is that Windows sometimes gets taken aback for no reason at all, in which case starting over might help.
If your Mac requires another storage point for the drivers, you can use a USB flash stick as the driver source.
Nate

Does anyone have problems installing CS6 Master Suite from a DVD on a Mac?

I'm trying to install the CS6 Master Suite on a mac that has OS X Moutain Lion on it. I keep getting an error message that the software can't be verified and that it may be counterfeit. I purchased the DVD from Adobe directly and it appears to have the proper paper work that signifies that it is a legal copy. I have been in contact with tech support and they tried to help but it didn't work. Also, Adobe certified the serial number so there isn't anything wrong with it. Does anyone else have any suggestions?
Thanks

Thanks for the response. The only problem that I have with downloading the trial is that A) I have DSL internet connection and it is extremely slow when downloading such a large file. That is why I opted to get the DVD. Because my optical drive kept spitting out the DVD, it has a few scratches on it. Will this create problems if this problem is corrected in the future? Should I request a new DVD? Also, B) there are features in the Master Suite that are not included with the trial download. Once I have most of the other programs downloaded and installed, how can I get the other features in the full version of the Master Suite that are not included in the trial?

Problems Installing via an External Firewire DVD drive

Hi,
I'm trying to install Leopard from an external LaCie D2 (with LightScribe) DVD/DL drive via a Firewire cable.
I start the iMac (G5 20" SuperDrive is dead) via the "option" key, a screen with a choice between HD and Leopard Install DVD appears.
When I select the second option (install Leopard) I have the Apple Start Up screen (the grey screen with the dark grey Apple) but the spinning flower is missing. And the screen stays that way for minutes... Is it normal? Do I have to wait more? Is my iMac cursed?

Here's the problem:
1- the problem occurs when I boot, so the OS is "innocent"
2- when I load the start up menu (with the option key held down) I see both of the drives (HD and External Firewire DVD drive), so it can't be a "power" problem... (http://youtube.com/watch?v=MQs2n1vxpkw)
3- when I insert a DVD (movie for example), the drive reads it when connected via USB 2.0 and doesn't via Firewire, so the drive is unable to read (or reads slowly)? a Driver problem?
4- when I shutdown the iMac with the external drive connected via the USB port, the drive shuts down too, while it doesn't when it's connected via the FW one...

Compaq M2000Z - installing XP from CD/DVD Drive

My daughters M2000Z stopped working after a reboot last evening. It seeemed to be having some USB issues before this problem. So I rebooted it and it would not come up, even in Safe Mode. Hard Drive starts and have booted it from the CD Drive with some DOS-Like OS's and I'm able to run a chkdsk on the hard drive.
However, when I try to use a copy of XP Pro I have and boot from the CD the system starts and goes through all the processes of setting up. However it stops at the "Setup is starting Windows".    I've done a lot of searching on the net and it seems to this has something to do with Windows not loading or recognizing the right drivers or there being a bios problem. Whichever it is, given that I can't get the system to load I have no way to update the bios or drivers.
Should I just order the reimage CD's and go from there? 1) Are there other alternatives 2) Will the reimage disks work?
Thanks.

Satellite P505-S8980
Bug Check 0x3B: SYSTEM_SERVICE_EXCEPTION
After installing Roxio Creator 2010, I get BSoD whenever I try to install other software from cd/dvd drive. ... I've seen where others are having similar issues
Peculiar. What happens after you uninstall Roxio?
==================================================
Dump File         : 012311-20748-01.dmp
Crash Time        : 9/1/2011 11:45:44 AM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code    : 0x0000003b
Parameter 1       : 00000000`c0000005
Parameter 2       : fffff800`02f690c0
Parameter 3       : fffff880`0a0dc5e0
Parameter 4       : 00000000`00000000
Caused By Driver : cdfs.sys
Caused By Address : cdfs.sys+beb1
File Description :
Product Name      :
Company           :
File Version      :
Processor         : x64
Computer Name     :
Full Path         : C:\Test\012311-20748-01.dmp
Processors Count : 2
Major Version     : 15
Minor Version     : 7600
==================================================
==================================================
Dump File         : 020111-35365-01.dmp
Crash Time        : 9/1/2011 11:33:16 AM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code    : 0x0000003b
Parameter 1       : 00000000`c0000005
Parameter 2       : fffff800`02f840c0
Parameter 3       : fffff880`0b70f5e0
Parameter 4       : 00000000`00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+70740
File Description :
Product Name      :
Company           :
File Version      :
Processor         : x64
Computer Name     :
Full Path         : C:\Test\020111-35365-01.dmp
Processors Count : 2
Major Version     : 15
Minor Version     : 7600
==================================================
-Jerry

Install Tigre from FW DVD drive?

Has anyone had any luck installing by this venue?
My internal combo drive is a bit dodgy with DVDs these days; i'm thinking of borrowing an external FireWire DVD drive for this adventuresome install. Anyone done this?

Okay, FINally.
I did it. Here are my super-idiosyncratic results. They go against just about all the expectations i had from reading recent posts... so I hope it makes for interesting reading!
Bottom line: Installing over Panther worked, without wiping the drive. There were some hitches.
First off: using XPF 4, the beige booted just fine from the Tiger disc on the FireWire DVD drive. However, I had only a PowerBook install DVD, and it didn't like my system. "This software cannot be installed on this computer. [Restart]" Pah!
I did restart, without benefit of XPF this time, and the Beige hung of course; I had to boot back to 9 to return to square 1. Square 1 in this case was my Panther system, and my lovely paid copy of XPF 4.
I certainly wasn't taking this first "no" for an answer, so I attempted to install the packages from the DVD via Charles Srtska's Pacifist, which lets you skip the main OS installer program and choose which components to install.
First, in Pacifist, I attempted to "Update Prebinding Information" on the boot volume (which is the only installable place), and this stalled out. Deciding this was probably not going to work, I re-booted and repaired permissions.
Then I decided "enough pussyfooting." In Pacifist, I went straight to "Open OS X Installation Package" and selected everything except the printer drivers and foreign language localizations on the DVD and just said "Install".
Then it got interesting.
First of all, obviously Tiger is installing a great number of files which are identical in name to the Panther files they are replacing, and this is occurring on your present boot volume! Pacifist wants to ask you about each one of these 20,000 situations. Hesitantly, I checked "answer yes to all." Note: the beige had NOT booted from the DVD, Pacifist was just pulling the install packages from the DVD - and I'm pretty sure it was writing those files over the system files on the boot volume. Whoa! Is that even possible?
There was a Pacifist question about whether to update or replace ".app" bundles, with the risk that the apps would be unbundled into folders. I said I wanted to "update" in every such situation to maintain bundling, I think. Apparently the right choice.
There were several glitches when a "replace file" operation was refused: "...because a file cannot be replaced by a folder." One of these was an important Java folder, possibly the main Java app.; I grimaced and clicked OK each time. Several times these questions stopped the install for hours, by the way, since I was away from the computer.
However the install ran until the end. Finally, after installation and optimization, Pacifist wanted to update prebinding information on the boot disc, as I had tried to do before the installation. This operation was allowed to go for 12 hours but when I checked again, it had evidently stalled, so I force-quit Pacifist and restarted in OS 9. Fortunately I still have an OS 9 boot volume ... Then, XPF showed the option of rebooting in 10.4 on the volume where I had been doing the installation. Would it work?
Tiger booted all right. But it did not recognize my login, or my password, or my admin password, and did not let me login as root. The Tiger install DVD, being uncooperative, would not let me reset the admin password; I did finally accomplish this from the Panther install CD 1.
And then I could boot into Tiger as 'root'. In Sys Prefs: Accounts, I "created" my old two accounts again. Tiger asked if I wanted to use the same folders for these "new" accounts with the same old user names, I said yes. When I logged out of 'root' and logged in as each of these users, Tiger booted with all the old Panther prefs proper to each user. No migration necessary so far (haven't tested iphoto or itunes however).
Just now I have installed the 10.4.4 combined update, and repaired permissions with Onyx. Smooth.
After all that, I ran Software Update and - impressively - the missing Java file was noticed and reinstalled
I think it's time for me to pay for my copy of Pacifist!
I will say this: Tiger does not seem particularly faster than Panther on my machine, and it does not boot faster. I had Panther booting in half a minute, due to some stratagem posted on this forum which cuts the hardware check off during startup; I think this was achieved by force-shutting-down the startup process at some point and immediately rebooting, but I don't remember. Does anyone else?

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5 and I did the usb with compatibility software-once installation start from dvd, it ask me for some disk, usb or dvd drivers to continue. How I can continue the instalation?

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5.
I did the usb drive with the compatibility software-once installation start from the dvd, it ask me for some disk, usb or dvd drivers to continue.
How I can continue the instalation? How I can provide those driver to the instalation process?
Thanks
Manuel

You can't get there with GUID/GPT.
There are tips on making a USB flash device that is bootable.
You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
Windows Vista can be upgraded in place to 7 RC.
You'll need NTFS (30-50GB).
Windows doesn't support FW for booting.
You can create a drive that has Master Boot Record.

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it?

Googled for an instruction sheet. Got the following.
https://helpx.adobe.com/photoshop-elements/getting-started/install-pse.html
and
https;//helpx.adobe.com/photoshop-elements/kb/photoshop-elements-installation-errors.html
(Don't know why the second one didn't turn into a link, that's the url that printed out at the bottom of the page)
In any case it doesn't matter. I returned it to the store where I bought it.
Rule #1; Don't use a product if the people who produce that product (software, hardware, etc.) don't properly support it.
User forums and\or chat lines, are useful and may help. But! They do not constitute proper support (not for installation purposes anyway).

Problems installing OSX 10.8.4

I am having problems installing OSX 10.8.4

Try to be more explicit about your problem. As descriptive as possible. You also need to tell us what your computer model is and what version of OS X you are now using.

DVD player won't recognize firewire DVD drive and won't install.

I bought a Sony firewire DVD drive so that my wife could watch DVDs on her iBook. I can't get Apple's DVD Player to install on the iBook because it says it doesn't recognize any appropriate hardware.
Does anyone know how to get it to recognize the firewire DVD player and install?
If not, does anyone else know of a good third party DVD player for this iBook. I installed one, I think it is called Xine or something like that. It playes the DVDs but is "glitchy."
Thanks very much,
Ted Vieira

Actually, since posting the question I found an answer in an ealier thread...
I'm still not sure about getting Apple's DVD Player to work with an exernal drive, but you can get a free VLC Medea Player that works great at:
http://www.videolan.org/vlc/download-macosx.html
I was able to download this and install it. It was a little "glitchy" with USB 2.0, but worked fine with FireWire.
Ted Vieira

Panther to Tiger using LaCie Firewire DVD drive

First, it was suggested I start a new topic, because of using an external Firewire drive. I have the proper Tiger "Retail" install disk. This is for a friends iMac that did not come with a DVD/Combo drive.
Anything anyone can suggest. I'm hoping the following will work:
1. iMac has latest firmware, and is up to date with latest Panther.
2. hook up LaCie external firewire DVD drive, and as long as it is recognized on the desktop of my friends iMac, that I will be able to then insert/load the Tiger Install Disk and double click on it to install Tiger onto the iMac.
3. I additionally have the option of taking over my Intel dual-core MacBook (Leopard installed) and using that in Target Disk Mode with the Tiger disk in the combo drive of the MacBook. Will it then install on the iMac?
4. I appreciate any and all suggestions and help. I read through numerous posts, but all the links for the Applelink article about installing using Target Disk Mode simply take me to the main page of Applelink and I can't seem to find the instructions.
5. I'm just wondering anyone's experience in using an external Firewire DVD drive to use as the install disk for the OSX Tiger installation to an older iMac.
thanks! Patrick.

Hi Patrick, and a warm welcome to the forums!
1. Good.
2. Should work if it's Mac compatable, you'll find out soon enough.
3. Very likely.
4. The iMac should see the MacBook's DVD as bootable when the MB is in Target Mode.
5. It works with many FW Opticals, but a few do not support Mac Booting.
6. Another option possibly, you can clone an image of the DVDs to a FW drive and boot from that for an install too... I've used Toast to do it, but it can be done with Disk Utility.
PS. I doubt you'll have problems with 2 ways to go there, good luck!

Booting from CD/DVD drive on HP Pavilion 17-e158sm Notebook PC

Hello,
I have a problem with my new Notebook. When I bought the computer it had free dots on it, soo i decidet to instal windows 7 on until I could get windows 8.1. The only problem was that windows 7 was 32bit. Now I have windows 8.1 64 bit on a DVD, soo I cant updait my widows 7, because it is 32 bit. The only way is to instal my new windows by booting from CD/DVD drive in BIOS. But I here is the problem. The notebook doesnt want to boot from DVD, it starts Windows 7 every time. I tried everything, like changeing the Boot order. Please help.
Hope my english is good enought.

Have you checked BIOS to see if Secure Boot is enabled? IF so disable it. Enable Legacy .Clear all secure boot keys.
Btw.When you installed Windows 7 did you boot from the dvd?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Installation from external DVD drive

I have an older Powermac G4 that had a DVD-RAM drive and I replaced it with a high-speed Toshiba CD-RW drive. Is there a way to install Tiger from the DVD via an external drive or do I have to buy the CD's?

Assuming this Mac has a Firewire Port or Ports and you have an external Firewire DVD drive and your Mac and the external DVD drive supports booting the computer from the external DVD drive, the answer is yes.
If not, you need to use Apple's Media Exchange Program and exchange the Tiger DVD media for CD media or if you have access to another Mac with a DVD drive and both Macs support Firewire Target Disk mode, you can connect the two Macs via Firewire Target Disk mode and install Tiger on your PowerMac G4 from the Mac with a DVD drive.

Problem installing OSX 10.4 from Firewire DVD drive

Similar Messages

Maybe you are looking for