Problem installing Quicktime 7 Pro, help inquiry.

Hi, Im on 10.6.2, I already had Quicktime X installed on the machine, which came with Snow Leopard, But I just purchased Quicktime 7 Pro, and wanted to install that, when I tried, it would not let me because QT X was already installed, so I throw QT X in the trash, then try and download pro, but still, it says that QT X is still there.
The reason I want QT Pro over QT X, is that with Pro I cant take still photos and make them into a video sequence, which I believe X cannot do.
Any idea how to get this QT X off my system, so It will let me install QT Pro.
Many thanks in advance.

Click here for information, and use Pacifist to install QuickTime X.
(48786)

Similar Messages

How to Install QuickTime 7 Pro Application in My iPhone 4?

Hi,
How to Install QuickTime 7 Pro Application in My iPhone 4? QuickTime 7 Pro Application only for Mac? or is it available for iPhone 4 too please let me know the status. if yes means where i can get it from QuickTime 7 Pro application for iPhone 4?.
Thanks in Advance,
Suresh Balakrishnan.

It's not possible to download Quick Time for any iPhone. But all the iPhones has some kind of Quick Time built in. I mean, when you wanna open anything what is associated with Quick Time, then you can notice a symbol of Quick Time while it's loading. It all depends on the format of the video you wanna watch. If you watch films on the net via your iPhone, then that is a place where Quick Time associations are very commonly used.
But believe me, the best media player for iPhone is the built-in one!
The photo you showed us shows how Quick Time can convert videos and make them watchable on your iPhone.

Problems installing Quicktime - please help!

I just purchased a new iPod and I attempted to install Quicktime 7 from the site and as the download completes, an error message pops up saying "Some installation files are corrupt. Please download a fresh copy and retry intstallation." I also tried installing the itunes and quicktime components using the iPod CD, but I also get an error message as the download completes telling me to get a fresh copy and start again. What should I do??? Any help would be really appreciated. Thanks
(I am running on XP)

bump
for all of you having problems with Quicktime, install the alternative version. works great! no more problems or time wasted searching for answers to error questions!

HELP ME I have a serious problem on my macbook pro HELP ME

I have a serious problem on my macbook pro, after I made this tutorial this link:http://tonymacx86.blogspot.com/2010/01/tweaking-your-system-install-chameleon.ht ml, I could no longer install windows on mymacbook pro, already tried everything, according to my knowledge. already formatted, re-formatted, reset EFI, PRAMetc., nothing worked. Ever tried installing on different operating systems, versions of Windows 32 and 64 also, nothing worked.I'm sure that something strange aocnteceu after this tutorial I did,because before I was usually running windows on my mac. The error appears to me is: "Can not partition this drive because some files can not be removed." Sometimes I can go, but time to install windows and choose the partition BOOTCAMP, I get a message saying that the exclamation windows can not be installed on this partition, but maybe my BIOS is not supportedfor this installation. PLEASE HELP ME I'M DESPERATE AND NOT KNOW WHAT TO DO MORE. WAIT HELP
RICARDO

I did not know that the chameleon installation was just for Hackintosh, was lack of attention, my bad!!! I will try your method now. In a moment I'll tell you if it worked.
"My hd"> library> preferences> SystemConfiguration>com.apple.Boot.plist: This way is correct?????
Content of my "com.apple.Boot.plist:
<? xml version = "1.0" encoding = "UTF-8"?>
<! DOCTYPE plist PUBLIC "- / / Apple / / DTD PLIST 1.0 / / EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key> Kernel Flags </ key>
<string> </ string>
</ dict>
</ plist>
NOTE: When I did that tutorial I do not modify this file "com.apple.Boot.plist"
Wait reply.. Tks !!!

Many problems installing Quicktime+iTunes

(Keep in mind I have windows 7 64 bit)
I need the firmware update for my iPhone 3g, which normally I avoid because I always seem to have a problem with quicktime installing properly. But since a couple up my apps needed to work, I gave in.
When I tried to run the update through iTunes, it installs everything correctly. When I went back into iTunes, I got an error saying iTunes needs Quicktime to run properly. So I uninstalled both iTunes and Quicktime. I ran the Apple Update utility and it did the same thing. So I went to the web site and installed them separately. Again, iTunes 1, Quicktime 0. Now I get an error that I don't have the right file path for the .msi file.
I looked on the forum for this solution and found that I needed the Windows Installer Utility (to remove installer files that failed?) Removed Quicktime.
Attempted to reinstall again, since I can't get in iTunes, which I really need.
Now, a different set of problems occur. Now all of my icons that are shortcuts are Quicktime icons, and I cannot get into them without finding the original file in my directory. At this point Quicktime is not even on my computer any longer. When I try to install it, I get an error saying "Could not open key Unknown\components\(A bunch of numbers) Verify that you have sufficient access to that key, or contact your support personnel." I am on the only account on this PC, but to be fair, I did right click the install file and choose "run as administrator."
Please help!!

It's unlikely taking permissions of the registry key will solve install problems for QT when the initial post referred to a msi file.
This is a rare(ish) variation on a problem involving error messages mentioning missing .msi files that mostly affects 64-bit systems. Although the initial symptom for most people is the missing .msi message, if they use CleanUp, the underlying problem with the registry keys relating to the the Side-by-Side configuration of installed componentry for QuickTime (or Apple Application Support) will come to light.
That's what happened to poor Felix here. (Note in his first post that he's said he's already tried using CleanUp to address the .msi message ... so now the registry key issue has come to light.)
If permissions are just not set properly for the keys, regedit can get us through. But if there's underlying trouble with the ACLs (for example, some people get blank permissions on keys, which are impossible to manipulate via regedit) or other exotica going on, things get messy.

Problems installing QuickTime 7 with iTunes 6 for Windows XP

I am encountering problems with the latest version of QuickTime (version 7.0.3) together with iTunes 6.
Installation is fine except at the end when I receive an error message saying ’1628: Failed to complete installation’. It appears that both programmes have been installed and work but I am unable to uninstall them. Neither program appears in the Add/Remove programs list when they should be. If I select ‘Uninstall QuickTime’ from the Program list the uninstalation process starts but stops half way through.
I have tried downloading QuickTime standalone version but this is exactly the same. I removed the QuickTime folder, and all its contents, from C:\Program Files\QuickTime and installed the previous version (6.5.2) which installs and uninstalls fine.
I am at a loss as to why the latest version is causing problems.
Would appreciate any help or advice as to why this is happening?
Thanks

Will a 2nd Gen Shuffle sync with iTunes 6 for
Windows?
NO... 2nd Gen shuffle requires iTunes 7.0.2 or later

Problem installing Win XP Pro SP2 on 2008 Mac Pro running 10.6.8

Okay, I have never setup or ran a bootcamp partition so I apologize in advance for my ignorance on the subject. I have been attempting to install win xp pro (SP2). I am using the Boot Camp Assistant v3.0.4. I have created a 32GB FAT32 partition and at the point I click Continue Installation (with the XP Pro disc in the drive) the computer reboots to supposedly install.
What happens instead is I get a revolving censorship/ban circle icon, folder with question mark and apple logo. It just continuously will flash between those 3 icons until I restart.
Here's what I've tried...
-removing all other drives. I'm attempting to install on the boot drive which is in bay 1.
-removed all external devices only things plugged in are my usb keyboard and DVI monitor
-deleting and recreating the partition
-I have the xp pro cd in the top drive and the snow leopard cd in the bottom drive (both internal cd/dvd drives)
Computer:
Model Name:          Mac Pro
Model Identifier:          MacPro2,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          8 MB
Memory:          10 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP21.007F.B06
SMC Version (system):          1.15f3
No matter what I try I am met with the same results. I have held down the option key and manually selected the windows xp cd. It seems to be booting but immediately turns off my DVI monitor which, well, makes it impossible for me to actually know what is happening. I do have a nvidia GeForce 8800 which only has two DVI ports off the back. I do have the adapter and an old VGA monitor I could pull out of the attic but would rather not unless that is my only option. Can someone in the community please point me in the right direction?
Many, many, many thanks!
Curtis
OKC, OK

Update: my problem was solved by getting my VGA monitor out of the attic. Once windows was done and I ran the setup.exe off the Snow Leopard CD, all of the drivers were updated to allow me to switch back over to my apple cinema display.
Also, I did need to hold down the option key to select the windows CD to install...and again to select the windows partition to boot but so far everything is going well with Bootcamp 3.0.4 and XP SP2...other than it is windows.
-Curtis

Problems installing Quicktime

When installing Quicktime, I get the error message that says C:\Documents~1\Megan\Locals~1\Temp\IXP972.TMP\ cannot be found and that the old version cannot be removed. Ive tried finding this file, deleting temporary files and nothing works. Any suggestions? Thanks.

hmmmmm. if we can get the QuickTime program files/folders in the danger area out of the way, then we might be able to convince the PC to install a new version of it in another place. (this won't help with the disk corruption issue on the hard drive itself, but it might help us get itunes up and running in the meantime.)
let's try using "Unlocker" to remove the corrupted file/folder first:
http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml
if we can get rid of that one, we'll do a manual uninstall of Quicktime.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
next use the QuickTime component of the complete uninstall instructions in the following document as a guide to a manual removal of any other leftover QuickTime program files and folders.
Trouble installing iPod, iTunes, or QuickTime software in Windows
once we've got all the existing QuickTime scraped away, we'll try a repair install of itunes, which should reinstall your QT for you. (hopefully in a safer area of the drive.)
go into your add/remove programs. select itunes, click "change/remove", select "repair".
does that go through okay? if so, do your itunes and quicktime work okay again?

Can't install quicktime 7 please help!

I installed the newest itune (7) yesterday and tried to install quicktime 7 on my g4 cube. I am running tiger and quicktime 7 will not install. It keeps saying try again later. I have repaired all permissions, restarted the computer, but still will not insatll. PLEASE HELP!

rather than running the Installation "online", try downloading and saving a copy of the installer to your hard drive (the desktop is a fine location) and then running the install from there by doubleclicking the QuickTimeInstaller.exe file.
Does that install go through any better?

Problem Installing Quicktime 7

Hi,
I'm trying to install Quicktime 7 on my windows laptop (running windows 7). When I run the install program, it starts up , then stops and says "There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have tried simply running the installer and also running it "as administrator" but to no avail.
Thanks!
Mike

I'm gonna go ahead and answer my own question ... LOL. After doing some online research via google it turns out what I'm experiencing is a so called Windows 1721 error. It would be nice if windows actually told me that that's what it is, and for that matter which program is the "required" program, but it doesn't.
After some additional research, someone suggested that the program in question is Apple Software Update and the proposed solution was to "repair" that program in "Programs" under the Control Panel. I did that, and finally both Quicktime and iTunes were able to install.
Other suggestions that didn't seem to make any difference were to turn off the firewall and virus protection software.
Thanks Mike!
Mike

How to install quicktime 7 pro from logic studio

hello people.
I have installed Logic express 9 and then upgraded it to Logic Studio. Logic site do state that quicktime 7 pro is included in the Logic studio package. I have installed everything from the dvds, but i don't see quicktime 7 pro appearing anywhere. Anyone know about this?

I have installed Logic express 9 and then upgraded it to Logic Studio. Logic site do state that quicktime 7 pro is included in the Logic studio package. I have installed everything from the dvds, but i don't see quicktime 7 pro appearing anywhere. Anyone know about this?
Logic Studio may only "key" the QT 7 player for "Pro" use. I.e., Apple is very touchy about others distributing their software. In any case, I suspect Logic Studio may expect QT 7 v7.6.6 to already be installed on you your system in its default "Applications > Utilities" folder location. If it is not there, then you will have to download it manually at http://support.apple.com/kb/DL923 and run the installer since QT X v10.2 (included with Mountain Lion) cannot be upgraded for "Pro" use.

Problem installing Quicktime on XP

Everytime I try to install Quicktime (attempting to use both 7.45 and 7.2) I get the following error message: "Could not access network location \lib\ext\." I'm not installing from a network file, but the installer downloaded onto my hard drive.
Has anyone else experienced this, and if so, what's the corrective action I need to take?
Thanks.

... and now I know of at least three people who've been able to get past that error with a Java Update. Many thanks for reporting back to us about that.
Kudos for my suggestion here goes to Jacumba (who has been doing the bulk of the troubleshooting work for this error message), and polydorus (who first alerted me to the updating Java fix for this error message).

Problem installing Acrobat Reader Pro in Mavericks

Acrobet keeps crashing and I get "configuration error 16." I have deinstalled and reinstalled, but still doesn't work. I'm working on a new MacBook Air 11" with Mavericks and this is a first installatoin. I had no problem on my old MacBook Air 13" also with Mavericks.

Thank you for the reply. I'm afraid I was unclear - it's a problem with Acrobat XI Pro, not Acobat Reader. My mistake. The link you provided was just for Reader. Let me know if you have any other suggestions.

Problem instaling flash player plz help

I am having problems instaling flash player 10, i am using windows 7 and when i try to dowmload it there is a window that comes up saying that it did not pass the integrity check can anyone advise me on what the problem is?

Try downloading the offline installer(s):
for Internet Explorer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe (save to disk);
for all other browsers http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe (save to disk);
close all browser windows, then run the downloaded installer(s).

Problem Installing Flash CS3 Pro PLEASE HELP!!

I have downloaded the installer for about the 3rd time i
extract it all right but when i run the setup.exe its all fine
until it starts to install but then it says something like " insert
Adobe Flash CS3 Professional to continue" i keep trying but it
never works i even converted the folder to a .iso and mounted it
with the same name it told me but that still doesn't work. I have
run out of ideas please if anyone knows the problem please can you
help me out?

FYI: "Br" is the Bridge application - try launching that to
see if it fully installed.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Ms. Clause wrote:
> My computer is a brand new Vaio laptop loaded and 4 GB
RAM. I don't think I
> have a hardware problem. I tried to reinstall,
redownload and it still will
> not install the flash software. After I download I
clicked on the file and it
> install a folder in my drive, then I clicked on set up,
it went through a
> normal set up but for some reason it doesn't load Flash
CS3, it only load 2
> components from that I think it Br and something else.
>

Problem installing Quicktime 7 Pro, help inquiry.

Similar Messages

Maybe you are looking for