Problem installing SATA on 865PE/G Neo2

Guys, dont know if you can help... My system has been stable for some time, and then I installed a 200G SATA drive. After running DVD Rebuilder (with the temp file and reading writing to the drive) for a few hours I get the BSOD IRQL_NOT_LESS_OR_EQUAL. Tried changing memory around with no success. System was stable until I put the drive in.. Any ideas?
System:
400W PSU
MS-6728 865PE/G Neo2
Intel P4 2Ghz
Win XP Pro SP2
DVD-Rom
DVD-RW
IDE 9G HD (OS installed)
Ge-Force Video card
SATA 200G HD (causing problems)

Question for you...
These IRQL_NOT_LESS_OR_EQUAL errors usually displays in the following format:  Stop: 0x0000000A (parameter1, parameter2, parameter3, parameter4) IRQL_NOT_LESS_OR_EQUAL*** Address x has base at x - filename
Did you note the offending application filename?  If you know what is the filename of the application causing the crash, you can narrow down the possibilities a bit more.
BTW, MS knowledge base link on this particular type of error:  http://support.microsoft.com/default.aspx?scid=kb;EN-US;314063
In the knowledge base, Microsoft does not mention insufficient power as a cause.  Especially since you already tried another HDD and it works, it is most likely NOT a power issue.

Similar Messages

  • Problem installing SATA driver

    Did a clean install of my system today and ran into many problems >.<
    I used maxblast bootable CD to partition my 300gb maxtor drive.
    Used the floppies to setup XP pro and pressed f6 at start.
    Only have 1 drive Drive and it is plugged into the 1st SATA port, so I used the nvidia disk that came with my MB and chose the bottom option from the menu of 2 choices ( nvidia nforce storage controller )
    Windows setup then recognised the correct partitions maxblast had created and allowed me to install XP onto my choosen one.
    Once this was installed everything seemed to be working fine.
    Installed SP2 and all windows updates.
    Then I decided to try the nvidia unified driver from the nvidia website ( didn't install anything from the MSI supplied disk )
    That seemed to totally kill my PC on reboot, it can up with some startup screen I had never seen before, all black with a small rectangle with a windows logo in it. It hung on this screen after a while.
    Upon next reboot it would just bluescreen before getting fully into windows.
    So I though ho-hum, time to try again.
    Did everything the same, and at the point just after using nvidia disk during installation for the 2nd time & putting the XP CD in the drive ( the part where it says setup is copying files ) My PC would bluescreen really fast and reboot with a message ntldr is missing.
    I tried this over and over always getting the same results, I also tried installing both the options from the floppy with the same result.
    The only way I could set it up was without hitting F6 and letting windows get on with it. Trouble is, once it gets to the partition part it only see's my HD as 120gb or something similar, and doesnt see the partitions I created in maxblast.
    Once in XP I'm able to reclaim the rest of the HD space though.
    Then I just used all the drivers from the CD included with the MB, and all seems to work well apart from I was getting a message saying my USB stick drive could operate faster with USB 2 ports - Got the same message in all the ports, but it seemed to dissapear after I uninstalled a entry in device manager that was a yellow ? next to USB device.
    Is there something I'm doing wrong in the setup using the floppy disk? - perhaps the floppy is dodgy?
    It would be good to get it working like that, as I wouldn't have to wait ages while I format and partition the drive within XP, maxblast does it almost instantly.
    Also would be really good to know what drivers to install after XP has just been installed and updated.
    Should I use the CD that comes with MB, or try the nvidias again?
    Latest version bios used (1.4) with the raid options disabled and no overclocking at all.

    Still no luck being able to install those drivers during install.
    I even tried the method in the sticky thread where I enabled RAID on the channel the drive was in and pressed F10 at boot > hit right arrow key etc.
    System would bluescreen at the moment the welcome to setup section appears where you choose partition to install on etc.
    In the end I disabled raid in bios again and didn't use the drivers floppy ( I'd also used the latest from that unified driver download as also mentioned in the sticky )
    Using the slipstreamed sp2 installer windows actually recognised the full size of the drive now on the setup section ( the screen it would bluescreen at with the SATA drivers installed from floppy )
    I got the nforce maxwell and realtek drivers installed from the CD that came with MB and all is fine, so I'll count my blessings and leave it as is....for now
    I do wonder why it wont allow me those drivers though, I checked my HD with powermax uility and it seemed fine, but something must be dodgy somewhere. I just hope it doesn't rear it's ugly head while I'm in the middle of doing some work or anything.

  • Problem installing sata hardrive

    first of all my english is bad and im pretty much a noob when it comes to computer stuff
    ive got my new sata hard drive and i cant seem to install just the one hard drive. when im about to install windows and after loading up some  of the stuff it says that it doesnt find any hard drive. so i try again but this time press f6 and put in my floppy where it is written: G72-VASA040 VIA SATA RAID Driver for VT6520/VT8237. i guessed its a driver for my hard drive so i pressed f6 and put it in and it started copying files but it didnt manage to copy all of them so it had to jump over some of them but only a few. after that comp restarts and it is loading windows xp. but then blue screen shows up and says alot of stuff that i gotta do like virus check, alot about hard drive and so on.. so when comp restarts i can press tab and get in this menu where it says something about raid, array and : Warning the number of disc are not (dont remember word) to create a raid.. i cant do anything in that menu but to exit it.
    what am i doing wrong or what do i need to do?
    sata ide controller is enabled on bios checked that.
    here the stuff i know about my comp
    MSI K8T Neo-V
    amd 1.8giga hertz
    blaster5 fx 5600xt
    512mb memory
    and one new sata hard drive

    SataI or 150 are 150MB per second drives. A SataII or 3G drive are 300MBPS Drives. They do not mix well. However on the drive there is a jumper to allow you to set it as a SataI drive which will work with your Motherboard. You have to look in the documents that came with the drive or on the Drive Makers website. As you did not give the exact model I can not be sure what jumper to set and guessing is not a good idea here. Use Google.com and look up Hitachi and then find the info on their site for that jumper location.
    However it may also be a SataI drive and your not doing something right. Let's take one thing at a time here.
    Let me know if it is in fact a SataI or II drive and we can go from there. If you can get me the link for the webpage you find for your drive or at the very least the full modelname.

  • Novice - How To Install SATA Drive on K8N Neo2 Platinum

    My current 2 SATA drives are almost at max capacity and hooked up to SATA 3 & 4 slots.  How do I go about installing a new SATA drive on slot 1 or 2?  I thought SATA was plug n play and all I had to do was enable SATA ports 1 to 4 in BIOS.  I've searched online and found articles pertaining to limitations on SATA slots 1&2, RAID configuration, VT8237 & Promise 20579 drivers --- and I am utterly confused 
    This is the hard drive that I've been eyeing.  http://www.newegg.com/Product/Product.asp?item=N82E16822148144  I only want to attach it to a bay in my PC and use it as storage, not install Windows.  Can someone provide clear cut directions for a novice like me on how to install it?

    Enable the sata ports, which you intend to use with it.
    Jumper drive to sata I mode.
    Connect new drive.
    Boot into windows and go to disk management where you will see it listed.
    You will need to partition and format it there.
    Once completed it will show up in My Computer and be ready to use.
    http://www.pcstats.com/articleview.cfm?articleid=1778&page=6

  • Problems installing SATA Drivers for K8tm-ILSR with Via VT8237R

    I have a Gateway 812gm.  For some reason this machine was sent to me with the wrong board in it...at least accroding to Gateway.  It took me 2 months for them to believe that the board in my pc had sata capabilities.  Anyway...There is nothing in the bios for me to enable the sata ports on the motherboard.  I looked everywhere.  The current ver. of bios I am running is a67741vg1 v3.4b1 121404.  I tried to flash the latest bios version(1.6) that I could find.  I don't have a 3.5" floppy drive so I formatted a usb drive as a windows millenium boot disk.  Then I copied the two files:  a6741vms.160 and adsfi713.exe to the ramdrive(E:).  Then from the ramdrive I typed adsfi713 a6741vms.160     Then the AMI Flash Programming Utility for DOS comes up and says  "ROM FILE NAME A6741VMS.160 ROM SIZE 00040000H  - Error File Size Not Match.  I have an AMD Athlon 64 3200+.  I also have an IDE Raid controller hooked up...SIL 0680 ATA/144 Medley Raid Controller(don't know if that matters).  And I am trying to hookup a Seagate Barracuda 80 gig sata drive.  Model #ST380817AS.  Hope someone can help me out.  I desperately need it.  Thanks a bunch.

    Try this:
    - Go into bios and select Optimized Settings;
    - Reboot and go into bios again.
    - Goto Integrated peripherals and enable onboard SATA and set it to SATA when using only one disk. If this option isn't available, just select enable;
    - save and exit bios and restart PC;
    - when in Windows have a look under Device manager;
    - goto SCSI & RAID controllers and have a look. The VIA SATA RAID (or something like that) should be there.
       - If not,  look under IDE controllers and look for it there.
    One way or the other, it should be there now. If not, just tell us and we'll look further.

  • MOVED: Problems installing SATA 300 with K8N Neo 4-RAID Config window locking up

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=101748.0

    Workknot, thanks for the link.  The info was very interesting..especially the part about other drives being effected.  This drive was "relatively" new, being built in Feb 06.  Since Seagate aquired Maxtor, I don't know if the Maxtor issue will be forever resolved or if some/more Seagate drives will be effected in the future.  Built2Last, thanks for pointing out the different RAID capabilities.  The PCB you mentioned is the one I have.  Other than the RAID 5,10 capability (dont know what that is), I'm uncertain why they would incorporate two different controllers.  Up to now, I never even looked at the back of the manual where the RAID stuff is located.  I'm a 'simple' user and thought that installing this drive would have been as simple as plugging in another IDE.

  • Problem installing drivers for on-board Realtek sound

    Using Neo2
    I keep getting the following error when Windows XP tries to install the driver:
    "Cannot Install this Hardware
    There was a problem installing this hardware:
    Realtek AC'97 Audio
    An error occurred during the installation of this device
    The data is invalid"
    I've tried all the usual stuff of ensuring that the software is installed prior to the PnP wizard. I've even tried installing the NT4 (non-PnP) drivers (which installed ok and appeared to work, except that the sound device wasn't recognised).
    I've tried the latest patch to no avail. Is my H/W knackered?
    Any input gratefully received. 
    Cheers,
    /D

    Ahem,
    I thought what I had specified was relevant to the query, but here goes:
    -Motherboard type and model             - MSI K8N Neo2 Platinum (939)
    -Bios type and revision (AMI rev 1.9)    - Phoenix - AwardBIOS v6.00PG Version : Nvidia - 42302e31
    -CPU type and model                         - AMD Athlon(tm) 64 Processor 3000+ (939)
    -Memory name, model and quantity     - not sure but 3200, 2x512Mb Generic. Seems stable
    -Video card name and model plus drivers and version - Hercules 3D Prophet 9600/9600Pro Series (SE) Driver Version : 5.2.3790.2
    -Power Supply name, model and the amp rating for the +3.3V, +5V and +12V lines plus any limitation on the +3.3/+5V combined watts. This information can be found on a sticker on the side of the supply. - sorry but I haven't got the time to open the case up. It's a decent 400W jobbie. I've previously checked the various voltages and they seem OK.
    -Hard Drives: Manufacturer, type and size and which IDE or SATA ports they are located on WDC WD800JB-00ETA0 (Sata 6) MAXTOR 6L040J2 IDE 1 (master)
    -Optical Drives: Manufacturer and type and which IDE ports they are located on CDROMLITE-ON_LTR-48125S______________________1S05____\5&1DE79660&0&0.0.0 on 2nd Ide master
    -Operating system and service pack level - WinXP SP1 and hotfixes.

  • Help installing XP Pro on K8T Neo2-F!!!

    I'm trying to help my cousin install XP Pro on their new pc. It's got an Athlon 64 3000+, K8T Neo2-F, 512mb Samsung ram, and an 80gb ata drive. before i started to fix it, my cousin said that he stopped the xp install midway thru because he forgot to install the RAID drivers. when i try to reinstall xp, it just freezes on DOS when it says "setup is checking hardware configuration" or sumthin like that. i also noticed that their dvdrw drive stops spinning and has a clicking noise at that point. i tried installing win 98 on it and it worked, then tried to upgrade to xp, which froze when the pc rebooted. anyone have any idea what's going on???

    Hi. My setup is very similar, and I had a similar problem installing XP as well. Do as simon suggested to make sure your harddrive is clean for a fresh install. Make sure the promise 579 SATA controller and the VIA SATA RAID controller are both disabled in BIOS. Especially if your not using a RAID setup or any SATA drives you wont need them anyway.
    Install XP as normal. Do not install the RAID drivers from the floppies by hitting F6. Now the XP installation should be able to complete itself. If you want to use the controllers later, enable the one (or both) you want in BIOS, Then install the drivers from the CD under Device manager update driver option.

  • Install sata drive

    have a 865pe neo2 and would like to install an sata drive  and copy xp from current hard drive to sata drive. can I just install sata drive to sata controller? what to do?
                                                                                                                Thanks
                                                                                                                 JOHN

    Quote from: NovJoe on 12-August-07, 11:39:50
    Yes, you can install a SATA drive in but you must do the following settings:
    ATA On Chip Config: Native
    ATA Mode: SATA Only
    PATA Keep Enabled: Yes
    PATA Channel Selection: No
    Set SATA as RAID: No
    The rest at defaults.
    Next, you can't copy and paste windows from drive to drive as there'll be alot of i386 and winnt/system32 files being locked, thus unable to be copied over.
    not looking to copy &paste but will use software that comes with sata drive or some other program to copy win xp to sata drive. will that work?

  • Problems installing XP

    Hi there. Im having problems installing XP. Sometimes i can get it loaded with using FAT 32 files but when i power down machine and go to restart it gives my a corrupt or missing file. I have no problems with ME. It seems to work fine and stable too boot but that XP is driving me nuts. I have tried two different copies and it gives me the same missing file error. ANY IDEAS.
    K8t neo
    amd64 3000
    enermax 350 watt 3.3-32,a 5-32a, 12-17a
    1 80 gig seagate drive
    1 dvd drive
    1 stick 256 meg OCZ memory on the list

    Hi there. I Changed my power supply to An Antec true power 430 watt. The system seems to run stable when im in Windows xp or doing reboots installing software. But when i shut down system to do cold boot it say's error finding drive. Im using a seagate drive that was setup using disk wizard. I can get back into xp if i hit rewrite master boot record. But when i shut down again Its the same thing. Ive disabled both sata controllers and am just using the ata. Im using the 1.1 bios and have tried swaping cables on hard drive.

  • Problem of SATA burner blu-ray drive vs IDE ribbon in the mac. Would all I need is a SATA to IDE/IDE adaptor?

    I purchased an MCE blu-ray burner a while back in 2010 and am only now installing it, and am running into the problem of SATA drive vs IDE ribbon in the mac.
    Would all I need is a SATA to IDE/IDE adaptor? Are there any details I need to know?

    that one will definetly not work, notice how theres no place for you to hook your power connector in there?  going IDE to SATA is something I am yet to find an adaptor that really works well yet( that being said i only tried once.) that being said, you can definetly use somethign like the thing i link to below assuming you have a free HDD bay.   you can use it to bring one of your HDD sata ports AND power, up to your optical drive bay.  That way, theres no convertion, only a quick little extention.  They come in varying lengths from 3", (prob too short), to 8" (the one i linked to, might just barely be long enough, maybe still too short) to 20", more than long enough.  
    Good luck
    http://www.ebay.com/itm/22-Pin-Male-22-Pin-Female-SATA-Extender-Cable-8-Inch-/27 0651981600?pt=LH_DefaultDomain_0&hash=item3f041d7f20#ht_500wt_1039

  • Installation problems installing new Canon MG3170 onto MAC Book Pro with OS X 10.7.5.  Tried installing  using set up disk. Didn't work.  Uninstalled files and downloaded drivers from Canon Website. Didn't work. Uninstalled again and plugged printer usb

    Having problems installing Canon MG3170. Anyone have any solutions?  Here is what I have tried:-
    -Installed from provided Canon disk, firstly with wireless connection, then using USB connection.  Printer could not be added because the Macbook returns that the software is not available from Apple for both types of connections.
    -Uninstalled software from the Canon disk, checked for software updates, then downloaded drivers (printer and scanner) from Canon Website.  Again tried to install using wireless connection then USB connecton.  Printer could not be added because Macbook returns that the software is not available from Apple
    -Uninstalled drivers downloaded direct from Canon Website and plugged printer into Macbook using USB, Macbook recognised the printer and searched for the software, again Macbook returns that hte software is not available from Apple.
    Help!

    nrg adjusta,
    Sorry it took me a while to repsond, Ive been pretty busy with school and work. But for my hard drive problem, I did hours and hours of more research and trying countless ways of installing and tweaking things in my laptop and absolutely nothing worked that I could do. It was very irritating because I felt like I was so close to fixing it and I was just missing a step somewhere. Though It still boggles me why the disk utility shows a different capacity for the HD's. One thing I'm going to try next is replacing the hard drive cable that goes from the internal HD to the macbook. I read somewhere that sometimes those can go bad over time, and also if you get a new, modern hard drive, sometimes the old cable (for some odd reason) might not be compatible with the new HD. So i want to test it out for myself to see it that is the actual culprit.
    http://www.ifixit.com/MacBook-Parts/MacBook-Hard-Drive-Cable/IF186-018
    Once I get the cable and install it I'll let you know the results and if it helped at all.
    Have you made any progress on your hard drive at all? If worst comes worst for you, you can probably get a SATA to USB cable and try to reformat it that way (this is the way that worked for me, but the only problem was it wouldn't be recognized when I installed it internally. Thats why i want to try getting the new cable), and if it still wont recognize it after that, you can just leave it outside of your mac, and just boot from that. The only thing that ***** about that is you have this big hard drive handing off the side of your mac when ever you need to use it.
    Heres a link for a SATA to USB. this one is good because is compact and protects the HD from damage and most static electricity.
    http://www.thinkgeek.com/computing/usb-gadgets/e6d9/?srp=3
    Im still continuing my search for the answer and once i find it (if ever!) I'll post it.

  • K9N2 Diamond problems installing Vista 64bit Raid Drivers

    Hello everyone I have been having problems installing Raid Drivers during Vista 64 Install.  The 32-bit drivers work fine and I can also set up Windows Vista 32 in Raid 0.  But the same place where the " No CD/DVD drivers..." clause is will not let me use 64-bit Drivers.  I have tried MCP72 and MCP73 raid drivers and neither is recognized.  This is my setup.....
    AMD Athlon 64 x 2 (3.2ghz)  Black Edition
    LiteOn Blu-Ray Player/Burner
    LiteOn DVD/CD Burner
    2 x 640 GB WD HDD
    8gb (4 x 2gb Sticks) OCZ PC 6400 (DDR2 800) Ram
    2 x Nvidia GeForce 9800 GSOs SLI
    Xion 850w Modular Power Supply
    K9N2 Diamond Motherboard
    I am not using IDE at all,  everything is Sata. So in BIOS I have IDE Controller off.   I have the SATA port Set to RAID.  I have no idea what I am doing wrong.  I had this same setup on my K9N SLI Platinum board and it all worked fine. However every since I "upgraded" to this board I havent been able to install Vista 64 on my Array.  I also have tried formatting the HDDs and I have tried setting up the Raid all over. Plz help me.  This is my first post ever in a forum so if you need any info that I did not post here pls just let me know :D

    By the way Here is my BIOS Settings:
    - Standard CMOS Features
    (None of my Hardware is Listed)
    - Advanced BIOS Features
    Full Screen Logo Display                       Enabled
    Quick Booting                                     Enabled
    Hybrid SLI Support                              Disabled
    Primary Graphics Adapter                      PCI-E
    Boot Up  Num-Lock LED                        On
    IOAPIC Function                                  Enabled
    MPS Table Version                               1.4
    PCI Latency Timer                               64
    * CPU Functions                               
       (None Available)
    * Chipset Features
       HPET                                             Disabled
       On-Chip VGA                                   Disabled
    *  Boot Sequence
        1st Boot Device                              BD Player
        2nd Boot Device                             Raid Array
        3rd Boot Device                              None
    *  Trusted Computing
        TCG/TPM Support                           No
    -Integrated Peripherals
    USB Controller                                    Enabled
    USB Legacy Support                            Enabled
    Onboard LAN Controller                        Enabled
    LAN Option ROM                                 Disabled
    Onboard IEEE1394 Controller                 Disabled
    Extra Raid/IDE Controller                      Enabled
    Raid Mode                                         RAID
    HD Audio Codec                                  Internal Codec
    *On-Chip ATA Devices
       On-Chip IDE Controller                       Disabled
       PCI IDE BusMaster                            Disabled
       On-Chip SATA Controller                    Enabled
       RAID Mode                                      RAID
    - I/O Devices
      COM Port 1                                      3F8/IRQ4
    Not sure if this helps any but I just thought I would post it anyways :D

  • 10.6.8 update combined - problems installing

    Hi all,
    Currently having huge problems installing this update on my mac, have been trying for a couple of days now to get this machine back up and running again after I was told by the genius bar 2 years ago that after them spending nearly 900 pounds on new parts, that they "had no idea what the problem was, but could be something to do with the logic board". I finally decided to sell it, but as a parts and repair it will get £100 and fully working it could get a bit more, so it's in my interest to get it up and running again.
    I am by no means a computer expert, but I know a few things and can normally sort problems out by just simply using search, but alas I have finally been beaten, and have come here to ask for some assistance.
    After re-installing my macbook pro 3,1 (mid 2007) with it's original 10.4 tiger software probably 5 times before it worked, then moving on to 10.6 snow leopard which also took a couple of attempts, I am now completely stuck with no way to get this machine up to 10.6.8, so that I can make the jump to mountain lion. The software update program is either an absolute heap of dung, or my computer just won't have any of it. I have tried multiple solutions which I will list below:
    Using software update to install the 10.6.8 combined update - Failed
    Downloading the 10.6.8 combined update from apple support downloads - Failed
    Deleting the library/preferencecom.apple.softwareupdate etc. files - Still software update Failed
    Downloading 10.6.1 update and installing - Success after a few attempts
    Downloading 10.6.8 combined and trying again - Failed
    Downloading 10.6.2 update and installing - Failed
    Now this is where I am at. I have downloaded these files both on the macbook pro itself, and on my windows laptop - then transfering them across. I have never been more frustrated at a computer in my entire life, and am about 20 minutes away from throwing this laptop out of the window onto a poor bystander below. If anyone has any solution - (and don't say reformat and reinstall the OS - I've already tried that), then it would be greatly appreciated!
    I'll post the console message from my last install of just the 10.6.8 combined upate (without using software update) and if someone on here who can make sense of these messages can see a problem or offer a solution, then that would also be greatly appreciated, thanks!
    Console message after attempted install:
    06/03/2013 13:53:17        com.apple.ocspd[185]   dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
    06/03/2013 13:53:25 Installer[182]      <ZeroSliderSplitView: 0x106dc2c70>: the delegate <TargetSelectPage: 0x106d6d9a0> was sent -splitView:resizeSubviewsWithOldSize: and left the subview frames in an inconsistent state:
    06/03/2013 13:53:25 Installer[182]      Split view bounds: {{0, 0}, {402, 104}}
    06/03/2013 13:53:25 Installer[182]          Subview frame: {{0, 0}, {0, 32}}
    06/03/2013 13:53:25 Installer[182]          Subview frame: {{0, 0}, {402, 104}}
    06/03/2013 13:53:25 Installer[182]      The outer edges of the subview frames are supposed to line up with the split view's bounds' edges. NSSplitView is working around the problem, perhaps at the cost of more redrawing. (This message is only logged once per NSSplitView.)
    06/03/2013 13:53:27 [0x0-0x17017].com.apple.installer[182]       dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
    06/03/2013 13:53:37 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Console"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.dashboardlauncher"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.frontrowlauncher"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.exposelauncher"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.QuickTimePlayerX"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.spaceslauncher"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.appstore"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.backup.launcher"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.BluetoothFileExchange"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PodcastCapture"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.keychainaccess"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PhotoBooth"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.VoiceOverUtility"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
    06/03/2013 13:53:38 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
    06/03/2013 13:53:38 com.apple.installd[198]      dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
    06/03/2013 13:53:50 com.apple.coreservicesd[50]      dyld: shared cached file was build against a different libSystem.dylib, ignoring cache
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.dashboardlauncher"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.frontrowlauncher"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.exposelauncher"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.QuickTimePlayerX"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.spaceslauncher"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.appstore"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.backup.launcher"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.BluetoothFileExchange"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PodcastCapture"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.keychainaccess"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.PhotoBooth"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.VoiceOverUtility"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Safari"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Console"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
    06/03/2013 13:53:57 Installer[182]      PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    06/03/2013 13:53:57 Installer[182]      The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.

    There really shouldn't be any problem downloading that combo update unless you've got a very slow or flaky connection. And Windows doesn't play as well with Mac files as the Mac does with Windows files; who knows what Windows might have done to the update's file integrity.
    You might also try downloading the file using another browser such as Firefox. And when you have the updater, reboot into Safe Mode and then run the updater. That way you can be sure there isn't third party software somehow interfering with the update while it's tinkering with the guts of OS X.

  • Problems installing Adobe Air and BBC iPlayer Desktop

    Problems installing Adobe Air and BBC iPlayer Desktop
    I'm running Windows 7 32 bit on an ASUS netbook with 2mb ram. I installed both  Air 3.7 and BBC iPlayer Desktop using Google Chrome. I downloaded 3 BBC programmes. Two ran fine but the third wouldn't start and I kept getting a message to try again later. I deleted this programme and downloaded it again, with the same result.
    So I uninstalled both Air and the BBC iPlayer Desktop, the Air exe file and the two folders at the following locations:
    C:\Users\USERNAME\AppData\Roaming\Adobe\AIR\   and
    C:\Users\USERNAME\AppData\Roaming\BBCiPlayerDesktop.xxx
    Since doing this each time I try to install Air either on its own or with the BBC iPlayer software I get the message part way through installation:
    "Sorry, an error has occurred.
    An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
    I have run the Microsoft Fix it programme and still get the same result.
    I have tried everything on your Trouble Shooting page apart from the bit about the elevated command prompt, but as I'm the sole user and administrator, that seems unnecessary.
    I have closed Chrome and tried installation using Windows Explorer but with the same result.
    I have tried all the above with Microsoft Security Essentials running and disabled. And I have tried the same with Astrill on and off.
    I have had a response from the BBC with much the same advice as appears on your trouble shooting page.
    Here is the Air installation log, followed by the MSI log.
    [2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:06:53:46] Commandline is:
    [2013-04-25:06:53:46] No installed runtime detected
    [2013-04-25:06:53:57] Relaunching with elevation
    [2013-04-25:06:53:57] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
    [2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
    [2013-04-25:06:54:02] No installed runtime detected
    [2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp
    \air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:54:10] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local
    \temp\air79c1.tmp\setup.msi
    [2013-04-25:06:54:10] Rollback complete
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Runtime Installer end with exit code 7
    [2013-04-25:06:54:20] Runtime Installer end with exit code 7
    [2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:06:55:38] Commandline is:
    [2013-04-25:06:55:38] No installed runtime detected
    [2013-04-25:06:55:45] Relaunching with elevation
    [2013-04-25:06:55:45] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
    [2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
    [2013-04-25:06:55:48] No installed runtime detected
    [2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp
    \air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:55:55] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local
    \temp\air30fe.tmp\setup.msi
    [2013-04-25:06:55:55] Rollback complete
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Runtime Installer end with exit code 7
    [2013-04-25:06:55:59] Runtime Installer end with exit code 7
    [2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:05:12] Commandline is:
    [2013-04-25:07:05:12] No installed runtime detected
    [2013-04-25:07:05:18] Relaunching with elevation
    [2013-04-25:07:05:18] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
    [2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
    [2013-04-25:07:05:24] No installed runtime detected
    [2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp
    \air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:05:29] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local
    \temp\air953.tmp\setup.msi
    [2013-04-25:07:05:29] Rollback complete
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Runtime Installer end with exit code 7
    [2013-04-25:07:05:31] Runtime Installer end with exit code 7
    [2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:07:06:12] Commandline is:
    [2013-04-25:07:06:12] No installed runtime detected
    [2013-04-25:07:06:21] Relaunching with elevation
    [2013-04-25:07:06:22] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
    [2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
    [2013-04-25:07:06:32] No installed runtime detected
    [2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp
    \aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:06:37] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local
    \temp\aire916.tmp\setup.msi
    [2013-04-25:07:06:37] Rollback complete
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Runtime Installer end with exit code 7
    [2013-04-25:07:06:40] Runtime Installer end with exit code 7
    [2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on
    Windows Vista x86
    [2013-04-25:07:26:15] Commandline is:
    [2013-04-25:07:26:15] No installed runtime detected
    [2013-04-25:07:26:28] Relaunching with elevation
    [2013-04-25:07:26:28] Launching subprocess with commandline c:\users
    \steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
    [2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on
    Windows 7 x86
    [2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
    [2013-04-25:07:26:37] No installed runtime detected
    [2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version
    3.7.0.1530
    [2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp
    \air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:26:48] Error occurred during msi install operation; beginning
    rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2
    text="1603" errorID=0]
    [2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local
    \temp\air3063.tmp\setup.msi
    [2013-04-25:07:26:48] Rollback complete
    [2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error"
    bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:26:48] Runtime Installer end with exit code 7
    [2013-04-25:07:46:09] Runtime Installer end with exit code 7
    === Verbose logging started: 25/04/2013  08:34:51  Build type: SHIP UNICODE
    5.00.7601.00  Calling process: C:\windows\System32\msiexec.exe ===
    MSI (c) (68:6C) [08:34:51:397]: Font created.  Charset: Req=0, Ret=0, Font:
    Req=MS Shell Dlg, Ret=MS Shell Dlg
    MSI (c) (68:6C) [08:34:51:397]: Font created.  Charset: Req=0, Ret=0, Font:
    Req=MS Shell Dlg, Ret=MS Shell Dlg
    MSI (c) (68:70) [08:34:51:469]: Resetting cached policy values
    MSI (c) (68:70) [08:34:51:469]: Machine policy value 'Debug' is 0
    MSI (c) (68:70) [08:34:51:469]: ******* RunEngine:
               ******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (68:70) [08:34:51:473]: Machine policy value 'DisableUserInstalls' is 0
    MSI (c) (68:70) [08:34:51:653]: SOFTWARE RESTRICTION POLICY: Verifying
    package --> 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi' against
    software restriction policy
    MSI (c) (68:70) [08:34:51:654]: SOFTWARE RESTRICTION POLICY: C:\Users
    \Steve\Downloads\MicrosoftFixit50381.msi has a digital signature
    MSI (c) (68:70) [08:34:51:966]: SOFTWARE RESTRICTION POLICY: C:\Users
    \Steve\Downloads\MicrosoftFixit50381.msi is permitted to run at the
    'unrestricted' authorization level.
    MSI (c) (68:70) [08:34:51:986]: Cloaking enabled.
    MSI (c) (68:70) [08:34:51:986]: Attempting to enable all disabled privileges
    before calling Install on Server
    MSI (c) (68:70) [08:34:52:001]: End dialog not enabled
    MSI (c) (68:70) [08:34:52:001]: Original package ==> C:\Users\Steve
    \Downloads\MicrosoftFixit50381.msi
    MSI (c) (68:70) [08:34:52:001]: Package we're running from ==> C:\Users
    \Steve\Downloads\MicrosoftFixit50381.msi
    MSI (c) (68:70) [08:34:52:010]: APPCOMPAT: Compatibility mode property
    overrides found.
    MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: looking for appcompat database
    entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
    MSI (c) (68:70) [08:34:52:012]: APPCOMPAT: no matching ProductCode found
    in database.
    MSI (c) (68:70) [08:34:52:041]: MSCOREE not loaded loading copy from
    system32
    MSI (c) (68:70) [08:34:52:063]: Machine policy value 'TransformsSecure' is 0
    MSI (c) (68:70) [08:34:52:063]: User policy value 'TransformsAtSource' is 0
    MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: File 3: -2147287038
    MSI (c) (68:70) [08:34:52:064]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
    MSI (c) (68:70) [08:34:52:065]: Machine policy value 'DisablePatch' is 0
    MSI (c) (68:70) [08:34:52:065]: Machine policy value 'AllowLockdownPatch' is
    0
    MSI (c) (68:70) [08:34:52:066]: Machine policy value 'DisableMsi' is 0
    MSI (c) (68:70) [08:34:52:066]: Machine policy value 'AlwaysInstallElevated' is
    0
    MSI (c) (68:70) [08:34:52:066]: User policy value 'AlwaysInstallElevated' is 0
    MSI (c) (68:70) [08:34:52:066]: Running product '{55D13F49-FCB8-4892-
    8266-05D373FCAA61}' with user privileges: It's not assigned.
    MSI (c) (68:70) [08:34:52:067]: Machine policy value 'DisableLUAPatching' is 0
    MSI (c) (68:70) [08:34:52:067]: Machine policy value
    'DisableFlyWeightPatching' is 0
    MSI (c) (68:70) [08:34:52:068]: Enabling baseline caching for this transaction
    since all active patches are MSI 3.0 style MSPs or at least one MSI 3.0 minor
    update patch is active
    MSI (c) (68:70) [08:34:52:071]: APPCOMPAT: looking for appcompat database
    entry with ProductCode '{55D13F49-FCB8-4892-8266-05D373FCAA61}'.
    MSI (c) (68:70) [08:34:52:072]: APPCOMPAT: no matching ProductCode found
    in database.
    MSI (c) (68:70) [08:34:52:072]: Transforms are not secure.
    MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding MsiLogFileLocation
    property. Its value is 'C:\Users\Steve\AppData\Local\Temp\MSIa5745.LOG'.
    MSI (c) (68:70) [08:34:52:073]: Command Line: CURRENTDIRECTORY=C:\Users
    \Steve\Downloads CLIENTUILEVEL=0 CLIENTPROCESSID=9576
    MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding PackageCode
    property. Its value is '{1C7C3009-013E-4A16-9A0F-0000FB80A613}'.
    MSI (c) (68:70) [08:34:52:073]: Product Code passed to Engine.Initialize:        
    MSI (c) (68:70) [08:34:52:073]: Product Code from property table before
    transforms: '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
    MSI (c) (68:70) [08:34:52:073]: Product Code from property table after
    transforms:  '{55D13F49-FCB8-4892-8266-05D373FCAA61}'
    MSI (c) (68:70) [08:34:52:073]: Product not registered: beginning first-time
    install
    MSI (c) (68:70) [08:34:52:073]: PROPERTY CHANGE: Adding ProductState
    property. Its value is '-1'.
    MSI (c) (68:70) [08:34:52:073]: Entering
    CMsiConfigurationManager::SetLastUsedSource.
    MSI (c) (68:70) [08:34:52:073]: User policy value 'SearchOrder' is 'nmu'
    MSI (c) (68:70) [08:34:52:073]: Adding new sources is allowed.
    MSI (c) (68:70) [08:34:52:074]: PROPERTY CHANGE: Adding
    PackagecodeChanging property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:074]: Package name extracted from package path:
    'MicrosoftFixit50381.msi'
    MSI (c) (68:70) [08:34:52:075]: Package to be registered:
    'MicrosoftFixit50381.msi'
    MSI (c) (68:70) [08:34:52:075]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (c) (68:70) [08:34:52:078]: Note: 1: 2262 2: AdminProperties 3: -
    2147287038
    MSI (c) (68:70) [08:34:52:078]: Machine policy value 'AlwaysInstallElevated' is
    0
    MSI (c) (68:70) [08:34:52:078]: User policy value 'AlwaysInstallElevated' is 0
    MSI (c) (68:70) [08:34:52:079]: Running product '{55D13F49-FCB8-4892-
    8266-05D373FCAA61}' with user privileges: It's not assigned.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
    CURRENTDIRECTORY property. Its value is 'C:\Users\Steve\Downloads'.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTUILEVEL
    property. Its value is '0'.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding CLIENTPROCESSID
    property. Its value is '9576'.
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding
    MsiSystemRebootPending property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:079]: TRANSFORMS property is now:
    MSI (c) (68:70) [08:34:52:079]: PROPERTY CHANGE: Adding VersionDatabase
    property. Its value is '200'.
    MSI (c) (68:70) [08:34:52:081]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming
    MSI (c) (68:70) [08:34:52:082]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Favorites
    MSI (c) (68:70) [08:34:52:084]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (c) (68:70) [08:34:52:085]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Documents
    MSI (c) (68:70) [08:34:52:086]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (c) (68:70) [08:34:52:088]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Recent
    MSI (c) (68:70) [08:34:52:089]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (c) (68:70) [08:34:52:091]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Templates
    MSI (c) (68:70) [08:34:52:092]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData
    MSI (c) (68:70) [08:34:52:093]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Local
    MSI (c) (68:70) [08:34:52:094]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Pictures
    MSI (c) (68:70) [08:34:52:097]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    \Administrative Tools
    MSI (c) (68:70) [08:34:52:098]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    \Startup
    MSI (c) (68:70) [08:34:52:099]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (c) (68:70) [08:34:52:101]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (c) (68:70) [08:34:52:102]: SHELL32::SHGetFolderPath returned: C:
    \Users\Steve\Desktop
    MSI (c) (68:70) [08:34:52:104]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (68:70) [08:34:52:106]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (c) (68:70) [08:34:52:107]: SHELL32::SHGetFolderPath returned: C:
    \ProgramData\Microsoft\Windows\Start Menu
    MSI (c) (68:70) [08:34:52:109]: SHELL32::SHGetFolderPath returned: C:
    \Users\Public\Desktop
    MSI (c) (68:70) [08:34:52:113]: SHELL32::SHGetFolderPath returned: C:
    \windows\Fonts
    MSI (c) (68:70) [08:34:52:115]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans
    Serif 4: 0 5: 16
    MSI (c) (68:70) [08:34:52:147]: MSI_LUA: Setting AdminUser property to 1
    because this is the client or the user has already permitted elevation
    MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding AdminUser
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:147]: PROPERTY CHANGE: Adding Privileged
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:52:148]: Note: 1: 1402 2: HKEY_CURRENT_USER
    \Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (68:70) [08:34:52:148]: PROPERTY CHANGE: Adding USERNAME
    property. Its value is 'Steve'.
    MSI (c) (68:70) [08:34:52:149]: Note: 1: 1402 2: HKEY_CURRENT_USER
    \Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding DATABASE
    property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding OriginalDatabase
    property. Its value is 'C:\Users\Steve\Downloads\MicrosoftFixit50381.msi'.
    MSI (c) (68:70) [08:34:52:149]: Machine policy value 'MsiDisableEmbeddedUI' is
    0
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SourceDir
    property. Its value is 'C:\Users\Steve\Downloads\'.
    MSI (c) (68:70) [08:34:52:149]: PROPERTY CHANGE: Adding SOURCEDIR
    property. Its value is 'C:\Users\Steve\Downloads\'.
    MSI (c) (68:6C) [08:34:52:153]: PROPERTY CHANGE: Adding VersionHandler
    property. Its value is '5.00'.
    === Logging started: 25/04/2013  08:34:52 ===
    MSI (c) (68:70) [08:34:52:171]: Note: 1: 2262 2: PatchPackage 3: -
    2147287038
    MSI (c) (68:70) [08:34:52:172]: Machine policy value 'DisableRollback' is 0
    MSI (c) (68:70) [08:34:52:172]: User policy value 'DisableRollback' is 0
    MSI (c) (68:70) [08:34:52:172]: PROPERTY CHANGE: Adding UILevel property.
    Its value is '5'.
    MSI (c) (68:70) [08:34:52:172]: Note: 1: 2262 2: Font 3: -2147287038
    MSI (c) (68:70) [08:34:52:174]: PROPERTY CHANGE: Adding ACTION property.
    Its value is 'INSTALL'.
    MSI (c) (68:70) [08:34:52:174]: Doing action: INSTALL
    Action 08:34:52: INSTALL.
    Action start 08:34:52: INSTALL.
    MSI (c) (68:70) [08:34:52:176]: UI Sequence table 'InstallUISequence' is
    present and populated.
    MSI (c) (68:70) [08:34:52:176]: Running UISequence
    MSI (c) (68:70) [08:34:52:176]: PROPERTY CHANGE: Adding EXECUTEACTION
    property. Its value is 'INSTALL'.
    MSI (c) (68:70) [08:34:52:176]: Doing action: Milestone_ERRCA_UIAN726
    Action 08:34:52: Milestone_ERRCA_UIAN726.
    Action start 08:34:52: Milestone_ERRCA_UIAN726.
    MSI (c) (68:70) [08:34:52:177]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_ERRCA_UIAN726'
    MSI (c) (68:70) [08:34:52:178]: PROPERTY CHANGE: Adding Milestone
    property. Its value is 'ERRCA_UIANDADVERTISED'.
    Action ended 08:34:52: Milestone_ERRCA_UIAN726. Return value 1.
    MSI (c) (68:70) [08:34:52:178]: Skipping action: ERRCA_UIANDADVERTISED
    (condition is false)
    MSI (c) (68:70) [08:34:52:178]: Doing action: Milestone_AppSearch122
    Action 08:34:52: Milestone_AppSearch122.
    Action start 08:34:52: Milestone_AppSearch122.
    MSI (c) (68:70) [08:34:52:180]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_AppSearch122'
    MSI (c) (68:70) [08:34:52:180]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'ERRCA_UIANDADVERTISED'. Its new value:
    'AppSearch'.
    Action ended 08:34:52: Milestone_AppSearch122. Return value 1.
    MSI (c) (68:70) [08:34:52:181]: Doing action: AppSearch
    Action 08:34:52: AppSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:52: AppSearch.
    MSI (c) (68:70) [08:34:52:182]: Note: 1: 2262 2: AppSearch 3: -2147287038
    Action ended 08:34:52: AppSearch. Return value 1.
    MSI (c) (68:70) [08:34:52:183]: Doing action: FindRelatedProducts
    Action 08:34:52: FindRelatedProducts. {\FinalUIFont}
    [PROGRESS_RESTORE_TXT]
    Action start 08:34:52: FindRelatedProducts.
    Action ended 08:34:52: FindRelatedProducts. Return value 1.
    MSI (c) (68:70) [08:34:52:185]: Doing action: Milestone_EulaForm201
    Action 08:34:52: Milestone_EulaForm201.
    Action start 08:34:52: Milestone_EulaForm201.
    MSI (c) (68:70) [08:34:52:186]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_EulaForm201'
    MSI (c) (68:70) [08:34:52:187]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'AppSearch'. Its new value: 'EulaForm'.
    Action ended 08:34:52: Milestone_EulaForm201. Return value 1.
    MSI (c) (68:70) [08:34:52:187]: Doing action: EulaForm
    Action 08:34:52: EulaForm.
    Action start 08:34:52: EulaForm.
    MSI (c) (68:70) [08:34:52:193]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'EulaForm'
    MSI (c) (68:6C) [08:34:52:205]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For VSI_MS_Sans_Serif13.0_0_0 textstyle, the system created a 'MS
    Sans Serif' font, in 0 character set, of 13 pixels height.
    MSI (c) (68:6C) [08:34:52:221]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For VsdDefaultUIFont.524F4245_5254_5341_4C45_534153783400
    textstyle, the system created a 'MS Sans Serif' font, in 0 character set, of 13
    pixels height.
    MSI (c) (68:6C) [08:34:52:225]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For VSI_MS_Sans_Serif16.0_1_0 textstyle, the system created a 'MS
    Sans Serif' font, in 0 character set, of 20 pixels height.
    MSI (c) (68:6C) [08:34:52:301]: Note: 1: 2262 2: CheckBox 3: -2147287038
    Action 08:34:52: EulaForm. Dialog created
    MSI (c) (68:10) [08:34:52:312]: Note: 1: 2731 2: 0
    MSI (c) (68:6C) [08:34:55:670]: PROPERTY CHANGE: Adding EulaForm_Property
    property. Its value is '1'.
    Action ended 08:34:56: EulaForm. Return value 1.
    MSI (c) (68:70) [08:34:56:881]: Doing action: EULAACCEPTED_ACTION
    Action 08:34:56: EULAACCEPTED_ACTION.
    Action start 08:34:56: EULAACCEPTED_ACTION.
    MSI (c) (68:70) [08:34:56:883]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'EULAACCEPTED_ACTION'
    MSI (c) (68:70) [08:34:56:883]: PROPERTY CHANGE: Adding EULAACCEPTED
    property. Its value is '1'.
    Action ended 08:34:56: EULAACCEPTED_ACTION. Return value 1.
    MSI (c) (68:70) [08:34:56:884]: Doing action: Milestone_LaunchCond24
    Action 08:34:56: Milestone_LaunchCond24.
    Action start 08:34:56: Milestone_LaunchCond24.
    MSI (c) (68:70) [08:34:56:886]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_LaunchCond24'
    MSI (c) (68:70) [08:34:56:887]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'EulaForm'. Its new value: 'LaunchConditions'.
    Action ended 08:34:56: Milestone_LaunchCond24. Return value 1.
    MSI (c) (68:70) [08:34:56:889]: Doing action: LaunchConditions
    Action 08:34:56: LaunchConditions. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: LaunchConditions.
    Action ended 08:34:56: LaunchConditions. Return value 1.
    MSI (c) (68:70) [08:34:56:891]: Doing action: CCPSearch
    Action 08:34:56: CCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: CCPSearch.
    MSI (c) (68:70) [08:34:56:892]: Note: 1: 2262 2: CCPSearch 3: -2147287038
    Action ended 08:34:56: CCPSearch. Return value 1.
    MSI (c) (68:70) [08:34:56:892]: Doing action: RMCCPSearch
    Action 08:34:56: RMCCPSearch. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: RMCCPSearch.
    MSI (c) (68:70) [08:34:56:893]: Note: 1: 2262 2: CCPSearch 3: -2147287038
    Action ended 08:34:56: RMCCPSearch. Return value 0.
    MSI (c) (68:70) [08:34:56:894]: Doing action: ValidateProductID
    Action 08:34:56: ValidateProductID. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: ValidateProductID.
    Action ended 08:34:56: ValidateProductID. Return value 1.
    MSI (c) (68:70) [08:34:56:895]: Doing action: Milestone_DIRCA_TARG947
    Action 08:34:56: Milestone_DIRCA_TARG947.
    Action start 08:34:56: Milestone_DIRCA_TARG947.
    MSI (c) (68:70) [08:34:56:897]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'Milestone_DIRCA_TARG947'
    MSI (c) (68:70) [08:34:56:897]: PROPERTY CHANGE: Modifying Milestone
    property. Its current value is 'LaunchConditions'. Its new value:
    'DIRCA_TARGETDIR'.
    Action ended 08:34:56: Milestone_DIRCA_TARG947. Return value 1.
    MSI (c) (68:70) [08:34:56:897]: Doing action: DIRCA_TARGETDIR
    Action 08:34:56: DIRCA_TARGETDIR. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: DIRCA_TARGETDIR.
    MSI (c) (68:70) [08:34:56:899]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'DIRCA_TARGETDIR'
    MSI (c) (68:70) [08:34:56:900]: PROPERTY CHANGE: Adding TARGETDIR
    property. Its value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
    Action ended 08:34:56: DIRCA_TARGETDIR. Return value 1.
    MSI (c) (68:70) [08:34:56:900]: Doing action: CostInitialize
    Action 08:34:56: CostInitialize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: CostInitialize.
    MSI (c) (68:70) [08:34:56:901]: Machine policy value 'MaxPatchCacheSize' is
    10
    MSI (c) (68:70) [08:34:56:901]: Baseline: Sorting baselines for {55D13F49-
    FCB8-4892-8266-05D373FCAA61}.
    MSI (c) (68:70) [08:34:56:901]: Baseline: New baseline 2.1.3 from transaction.
    MSI (c) (68:70) [08:34:56:902]: Baseline: Sorted order Native: Order 0.
    MSI (c) (68:70) [08:34:56:902]: Baseline Data Table:
    MSI (c) (68:70) [08:34:56:902]: ProductCode: {55D13F49-FCB8-4892-8266-
    05D373FCAA61} Version: 2.1.3 Attributes: 0 PatchId: Native BaselineId: -
    2147483648 Order: 0
    MSI (c) (68:70) [08:34:56:902]: Baseline File Table:
    MSI (c) (68:70) [08:34:56:912]: PROPERTY CHANGE: Adding ROOTDRIVE
    property. Its value is 'D:\'.
    MSI (c) (68:70) [08:34:56:913]: PROPERTY CHANGE: Adding CostingComplete
    property. Its value is '0'.
    Action ended 08:34:56: CostInitialize. Return value 1.
    MSI (c) (68:70) [08:34:56:914]: Doing action: FileCost
    Action 08:34:56: FileCost. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: FileCost.
    MSI (c) (68:70) [08:34:56:915]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: RemoveFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: MoveFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:916]: Note: 1: 2262 2: Shortcut 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: TypeLib 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: IniFile 3: -2147287038
    MSI (c) (68:70) [08:34:56:917]: Note: 1: 2262 2: ReserveCost 3: -2147287038
    Action ended 08:34:56: FileCost. Return value 1.
    MSI (c) (68:70) [08:34:56:917]: Doing action: IsolateComponents
    Action 08:34:56: IsolateComponents. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: IsolateComponents.
    MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: BindImage 3: -2147287038
    MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: IsolatedComponent 3: -
    2147287038
    MSI (c) (68:70) [08:34:56:919]: Note: 1: 2262 2: Patch 3: -2147287038
    Action ended 08:34:56: IsolateComponents. Return value 1.
    MSI (c) (68:70) [08:34:56:920]: Skipping action: ResumeForm (condition is
    false)
    MSI (c) (68:70) [08:34:56:920]: Skipping action: MaintenanceForm (condition
    is false)
    MSI (c) (68:70) [08:34:56:920]: Doing action: CostFinalize
    Action 08:34:56: CostFinalize. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    Action start 08:34:56: CostFinalize.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding OutOfDiskSpace
    property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
    OutOfNoRbDiskSpace property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
    PrimaryVolumeSpaceAvailable property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:920]: PROPERTY CHANGE: Adding
    PrimaryVolumeSpaceRequired property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:921]: PROPERTY CHANGE: Adding
    PrimaryVolumeSpaceRemaining property. Its value is '0'.
    MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Patch 3: -2147287038
    MSI (c) (68:70) [08:34:56:921]: Note: 1: 2262 2: Condition 3: -2147287038
    MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Modifying TARGETDIR
    property. Its current value is 'C:\Program Files\Microsoft\Microsoft Fix it 50381'.
    Its new value: 'C:\Program Files\Microsoft\Microsoft Fix it 50381\'.
    MSI (c) (68:70) [08:34:56:923]: Target path resolution complete. Dumping
    Directory table...
    MSI (c) (68:70) [08:34:56:923]: Note: target paths subject to change (via
    custom actions or browsing)
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: TARGETDIR          , Object: C:
    \Program Files\Microsoft\Microsoft Fix it 50381\
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: WindowsFolder          , Object: C:
    \windows\
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: ProgramMenuFolder          ,
    Object: C:\Users\Steve\AppData\Roaming\Microsoft\Windows\Start Menu
    \Programs\
    MSI (c) (68:70) [08:34:56:923]: Dir (target): Key: DesktopFolder          , Object: C:
    \Users\Steve\Desktop\
    MSI (c) (68:70) [08:34:56:923]: PROPERTY CHANGE: Adding INSTALLLEVEL
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:56:923]: Note: 1: 2262 2: IsolatedComponent 3: -
    2147287038
    MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: BindImage 3: -2147287038
    MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: Patch 3: -2147287038
    MSI (c) (68:70) [08:34:56:924]: Note: 1: 2262 2: RemoveFile 3: -2147287038
    Action ended 08:34:56: CostFinalize. Return value 1.
    MSI (c) (68:70) [08:34:56:925]: Doing action: ProgressForm
    Action 08:34:56: ProgressForm.
    Action start 08:34:56: ProgressForm.
    MSI (c) (68:70) [08:34:56:926]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT
    `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM
    `CustomAction` WHERE `Action` = 'ProgressForm'
    MSI (c) (68:6C) [08:34:56:938]: Note: 1: 2262 2: Error 3: -2147287038
    DEBUG: Error 2826:  Control Line1 on dialog ProgressForm extends beyond the
    boundaries of the dialog to the right by 3 pixels
    The installer has encountered an unexpected error installing this package. This
    may indicate a problem with this package. The error code is 2826. The
    arguments are: ProgressForm, Line1, to the right
    MSI (c) (68:6C) [08:34:56:941]: Note: 1: 2262 2: Error 3: -2147287038
    DEBUG: Error 2826:  Control Line2 on dialog ProgressForm extends beyond the
    boundaries of the dialog to the right by 3 pixels
    The installer has encountered an unexpected error installing this package. This
    may indicate a problem with this package. The error code is 2826. The
    arguments are: ProgressForm, Line2, to the right
    MSI (c) (68:6C) [08:34:56:948]: Note: 1: 2262 2: Error 3: -2147287038
    DEBUG: Error 2826:  Control BannerBmp on dialog ProgressForm extends beyond
    the boundaries of the dialog to the right by 3 pixels
    The installer has encountered an unexpected error installing this package. This
    may indicate a problem with this package. The error code is 2826. The
    arguments are: ProgressForm, BannerBmp, to the right
    Action 08:34:56: ProgressForm. Dialog created
    Action ended 08:34:57: ProgressForm. Return value 1.
    MSI (c) (68:70) [08:34:57:011]: Doing action: ExecuteAction
    Action 08:34:57: ExecuteAction. {\FinalUIFont}[PROGRESS_RESTORE_TXT]
    MSI (c) (68:6C) [08:34:57:012]: Note: 1: 2262 2: Error 3: -2147287038
    Info 2898.For FinalUIFont textstyle, the system created a 'Arial' font, in 0
    character set, of 15 pixels height.
    Action start 08:34:57: ExecuteAction.
    MSI (c) (68:70) [08:34:57:035]: PROPERTY CHANGE: Adding SECONDSEQUENCE
    property. Its value is '1'.
    MSI (c) (68:70) [08:34:57:043]: Grabbed execution mutex.
    MSI (c) (68:70) [08:34:57:043]: Incrementing counter to disable shutdown.
    Counter after increment: 0
    MSI (c) (68:70) [08:34:57:045]: Switching to server: TARGETDIR="C:\Program
    Files\Microsoft\Microsoft Fix it 50381\" EULAACCEPTED="1"
    CURRENTDIRECTORY="C:\Users\Steve\Downloads" CLIENTUILEVEL="0"
    CLIENTPROCESSID="9576" USERNAME="Steve" SOURCEDIR="C:\Users\Steve
    \Downloads\" ACTION="INSTALL" EXECUTEACTION="INSTALL" ROOTDRIVE="D:\"
    INSTALLLEVEL="1" SECONDSEQUENCE="1"  ADDLOCAL=DefaultFeature 
    MSI (s) (C8:D4) [08:34:57:086]: Running installation inside multi-package
    transaction C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
    MSI (s) (C8:D4) [08:34:57:086]: Grabbed execution mutex.
    MSI (s) (C8:BC) [08:34:57:092]: Resetting cached policy values
    MSI (s) (C8:BC) [08:34:57:092]: Machine policy value 'Debug' is 0
    MSI (s) (C8:BC) [08:34:57:092]: ******* RunEngine:
               ******* Product: C:\Users\Steve\Downloads\MicrosoftFixit50381.msi
               ******* Action: INSTALL
               ******* CommandLine: **********
    MSI (s) (C8:BC) [08:34:57:096]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (C8:BC) [08:34:57:097]: Setting cached product context: User non-
    assigned for product: 48945AC3B41AEF24F91FE79A10157D52
    MSI (s) (C8:BC) [08:34:57:097]: Using cached product context: User non-
    assigned for product: 48945AC3B41AEF24F91FE79A10157D52
    MSI (s) (C8:BC) [08:34:57:099]: Setting cached product context: User non-
    assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
    MSI (s) (C8:BC) [08:34:57:099]: Using cached product context: User non-
    assigned for product: 6BBFDF96D153C8B4988D68D79C0D2A4A
    MSI (s) (C8:BC) [08:34:57:101]: Setting cached product context: User non-
    assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
    MSI (s) (C8:BC) [08:34:57:101]: Using cached product context: User non-
    assigned for product: CAB1E4D953B64F542BD433D9568A0AB6
    MSI (s) (C8:BC) [08:34:57:103]: Setting cached product context: User non-
    assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
    MSI (s) (C8:BC) [08:34:57:103]: Using cached product context: User non-
    assigned for product: DED5B648C8CDA1E45B4BF9B5930AACEC
    MSI (s) (C8:BC) [08:34:57:104]: Setting cached product context: User non-
    assigned for product: E2EE924EC67B3554B8404B55780FF01D
    MSI (s) (C8:BC) [08:34:57:104]: Using cached product context: User non-
    assigned for product: E2EE924EC67B3554B8404B55780FF01D
    MSI (s) (C8:BC) [08:34:57:106]: Setting cached product context: machine
    assigned for product: 00002109001001400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:106]: Using cached product context: machine
    assigned for product: 00002109001001400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:107]: Setting cached product context: machine
    assigned for product: 00002109001031400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:108]: Using cached product context: machine
    assigned for product: 00002109001031400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:110]: Setting cached product context: machine
    assigned for product: 00002109001070400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:110]: Using cached product context: machine
    assigned for product: 00002109001070400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:111]: Setting cached product context: machine
    assigned for product: 000021090010C0400000000000F01FEC
    MSI (s) (C8:BC) [08:34:57:111]: Using cached product context: machine

    Hi Chris,
    The AIR installation log is in my original post - about 12 paras down but here is is:
    [2013-04-25:06:53:46] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:06:53:46] Commandline is:
    [2013-04-25:06:53:46] No installed runtime detected
    [2013-04-25:06:53:57] Relaunching with elevation
    [2013-04-25:06:53:57] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air79c1.tmp\adobe air installer.exe -ei
    [2013-04-25:06:54:02] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:06:54:02] Commandline is: -stdio \\.\pipe\AIR_1172_0 -ei
    [2013-04-25:06:54:02] No installed runtime detected
    [2013-04-25:06:54:03] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:06:54:04] Installing msi at c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:54:10] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Rolling back install of c:\users\steve\appdata\local\temp\air79c1.tmp\setup.msi
    [2013-04-25:06:54:10] Rollback complete
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:54:10] Runtime Installer end with exit code 7
    [2013-04-25:06:54:20] Runtime Installer end with exit code 7
    [2013-04-25:06:55:38] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:06:55:38] Commandline is:
    [2013-04-25:06:55:38] No installed runtime detected
    [2013-04-25:06:55:45] Relaunching with elevation
    [2013-04-25:06:55:45] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air30fe.tmp\adobe air installer.exe -ei
    [2013-04-25:06:55:48] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:06:55:48] Commandline is: -stdio \\.\pipe\AIR_1264_0 -ei
    [2013-04-25:06:55:48] No installed runtime detected
    [2013-04-25:06:55:49] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:06:55:51] Installing msi at c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:06:55:55] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Rolling back install of c:\users\steve\appdata\local\temp\air30fe.tmp\setup.msi
    [2013-04-25:06:55:55] Rollback complete
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:06:55:55] Runtime Installer end with exit code 7
    [2013-04-25:06:55:59] Runtime Installer end with exit code 7
    [2013-04-25:07:05:12] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:05:12] Commandline is:
    [2013-04-25:07:05:12] No installed runtime detected
    [2013-04-25:07:05:18] Relaunching with elevation
    [2013-04-25:07:05:18] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air953.tmp\adobe air installer.exe -ei
    [2013-04-25:07:05:24] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:05:24] Commandline is: -stdio \\.\pipe\AIR_3888_0 -ei
    [2013-04-25:07:05:24] No installed runtime detected
    [2013-04-25:07:05:24] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:07:05:26] Installing msi at c:\users\steve\appdata\local\temp\air953.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:05:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Rolling back install of c:\users\steve\appdata\local\temp\air953.tmp\setup.msi
    [2013-04-25:07:05:29] Rollback complete
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:05:29] Runtime Installer end with exit code 7
    [2013-04-25:07:05:31] Runtime Installer end with exit code 7
    [2013-04-25:07:06:12] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:07:06:12] Commandline is:
    [2013-04-25:07:06:12] No installed runtime detected
    [2013-04-25:07:06:21] Relaunching with elevation
    [2013-04-25:07:06:22] Launching subprocess with commandline c:\users\steve\appdata\local\temp\aire916.tmp\adobe air installer.exe -ei
    [2013-04-25:07:06:32] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:06:32] Commandline is: -stdio \\.\pipe\AIR_5884_0 -ei
    [2013-04-25:07:06:32] No installed runtime detected
    [2013-04-25:07:06:32] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:07:06:33] Installing msi at c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Rolling back install of c:\users\steve\appdata\local\temp\aire916.tmp\setup.msi
    [2013-04-25:07:06:37] Rollback complete
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:06:37] Runtime Installer end with exit code 7
    [2013-04-25:07:06:40] Runtime Installer end with exit code 7
    [2013-04-25:07:26:15] Runtime Installer begin with version 3.7.0.1530 on Windows Vista x86
    [2013-04-25:07:26:15] Commandline is:
    [2013-04-25:07:26:15] No installed runtime detected
    [2013-04-25:07:26:28] Relaunching with elevation
    [2013-04-25:07:26:28] Launching subprocess with commandline c:\users\steve\appdata\local\temp\air3063.tmp\adobe air installer.exe -ei
    [2013-04-25:07:26:37] Runtime Installer begin with version 3.7.0.1530 on Windows 7 x86
    [2013-04-25:07:26:37] Commandline is: -stdio \\.\pipe\AIR_2348_0 -ei
    [2013-04-25:07:26:37] No installed runtime detected
    [2013-04-25:07:26:37] Starting silent runtime install. Installing runtime version 3.7.0.1530
    [2013-04-25:07:26:39] Installing msi at c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
    [2013-04-25:07:26:48] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:26:48] Rolling back install of c:\users\steve\appdata\local\temp\air3063.tmp\setup.msi
    [2013-04-25:07:26:48] Rollback complete
    [2013-04-25:07:26:48] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
    [2013-04-25:07:26:48] Runtime Installer end with exit code 7
    [2013-04-25:07:46:09] Runtime Installer end with exit code 7

Maybe you are looking for